We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 303)
used
year of construction 2002 - completely refurbished in 2021 Extruder 45 mm, 22 D Control Beckhoff new pinola head new wall thickness control new hybrid pump Denison were installed. The machine was running 50 h since the refurbishing, and is as new. Further informations on request!
used
Throat depth: 915mm, spindle stroke: 110mm, table stroke: 200mm, max. opening between table and spindle: 310mm, controls: FAGOR, length: 905mm, width: 1550mm, height: 1700mm, weight: 648kg.
used
Year of construction: 2013 Hours: 41238 h Tool open max.: 1450mm / with adapter plate: 1230mm Tool closed min.: 830mm / with adapter plate: 610mm Depth clamping plate: 900mm / with adapter plate: 700mm Mold depth max.: .. / with adapter plate 500mm Height of clamping plate: 100mm / with adapter plate 1230 mm Max. shot weight: 1.5 kg Clamping force: 20 tons. Connected load: 155 KW
used
This EXTRAPLAST 140to Blow Moulding machine was manufactured in the year 2015. It is equipped with a it-AUTEC Blow Control. The machine has a clamping force of 1400 kN. See tech specs details in attached PDF (German).
used
Two-station machine for articles up to 5 ltr. Extruder 90/24D, quadruple head 4 x 45 mm center to center. Clamping force 83 kN. 460V 60 Hz Good condition
used
This YANCED YS600 Blow Moulding Machine was manufactured in the year 2015 in Spain. The machine has a clamping force of 180 kN.
used
Used molds, in good condition. Available ex stock
used
used
Single-station machine for articles up to 5 ltr. Extruder 80/24D, double head 160 mm center to center. Trim cutting in the machine. 460V 60 Hz Good condition
used
Tetra-Plast LX-2 (Sidel) PET bottles blow moulding machine for sale, maximum capacity of 3.000 bottles per hour with zero working hours completed in 2011. The machine was dry cycled and tested by a Tetra-Pak (Sidel) technician. The machine has the following components: 1. Main PET bottles blow moulding module 2. Silo with elevator for preforms 3. Chiller for cooling MTA-TAE 051 4. Moulds lifting device The moulds are not included in the price. The price given is Ex-Works our warehouse. The Tetra-Plast LX-2 (Sidel) PET bottles blow moulding machine for sale with two moulds, serial nr. 40102/2542, maximum capacity of 3.000 bottles per hour with zero working hours, and size of bottles between 0 and 2 liters. The machine was completed, dry-cycled and tested in 2011. It does not come with a pressure compressor. The machine does the movements with a press. The mould ...
used
used double head, with WDS adjustment, in good condition. Stitch 125 mm, nozzles up to 55 mm.
used
PET bottle blow molding machine, with a production capacity of up to 4000 bottles/h (depending on the format). For formats between 0.25 liters up to 3 liters. Composed by: - Oven for heating preforms composed of 6 heating modules with 8 infrared lamps each. - Preform transfer wheel - Compressed air blowing body in two stages, low pressure pre-blowing and subsequent high pressure blowing. - Bottle transfer wheel Delivered with pallet turner. Available documentation
used
Two-station machine up to 3 ltr. Extruder 70/24D. Triple head 85 mm center to center. Moog TMC 3 control. Triple Proportional control for mold / carriage / calibration. Leak test pre-staged
used
Kautex KB 15/10-S60/25 Blowmoulding machine From 1992 Type: continuous extrusion Clamping force : 200 kN Closing stroke for moulds: 2250 mm Max volume for the part: 30 L Cylinder diameter: 90 mm Die diameter: 140;170;190 mm Max package for tools: 700600(2300) mm Parison control: Yes Installed power: 125 kVA
used
STM PET blowing machine for 5 to 7 liters bottles Manufacturing year 2015 low working hours Currently blowing 6 liters bottles on mould 3 cavities at 30 bar. Capacity 3.000 bph Machine equipped with: preforms hopper and feeding system loading and process of the preforms inside oven with internal grip Preform heating by IR oven with 6 heaters each heating module with 8 lamps Preform grip and transfer to the mould Stretching & blowing station Exit device of the processed bottle EPI Eco power energy saving system Chiller and HP compressor included & also full filling & downstream line Unique opportunity Available immediately
used
The blow moulding machine ptb120d used for producing toys, drums, jerrycans, kettles, water tanks, etc, is single station with single die head, which is specially designed for 60l as maximum volume, suitable for hdpe, pe, pp, pvc, petg and other materials for blow moulding. Specifications: Max container capacity: 60 L Number of die heads: 1 Machine dimension (LWH): 865.0 meters Total weight: Ton 35 CLAMPING UNIT Clamping force: 600 KN Platen opening stroke: 880-1780 mm Platen size: 9501000 mm Max mould size: (WH) 9501600 mm Mould thickness: 900-1100 mm POWER Total power: 200 KW Fan power for screw : 0.185 KW Air pressure: 1.0 Mpa Air consumption: 1.2 M3/min Average energy consumption: 120 KW EXTRUDER UNIT Screw diameter: 120 mm Screw L/D ratio: 30:1 L/D Plasticizing capacity: 250 Kg/hour Number of heating: 5 Zone Extruder heating power: 32 ...
used
SIDEL SBO 6/10 series 1 PET blow-moulding machine for 6 moulds Linear oven with 10 modules Capacity 7.200 bph, equipped for quick change moulds Personalization for preform neck 29/25 Machine supplied with preforms hopper, unscrambler and infeed rail Sidel electrical panel, PCC drive and control panel Huge set of spare parts valued at 30.000€ included Dismantled february 2023 and stored in our warehouse. Excellent machine with low working hours. Very attractive pricing. Available immediately
used
MP1D blower for PE bottles from 100 ml up to 1 LT Double carriage! Excluding plastic grinding mill the machine is in good condition and working. Regarding the video: only one working head, as modifications have been made to bring the center distance to 120mm, with my molds it is not possible to make double heads With molds with a maximum cavity of 100 mm (subject to verification) it is possible to make both heads, restoring the initial center distance. Carriage translation stroke: 260 mm Mold opening 140 mm Mold thickness 80 2 mm Clearance between plates 300 mm There is documentation Moog is installed Machine sold as it is
used
Stretch cart: 1600 mm and width: 200 mm, Bausano brand.
used
The machine is almost brand new. It was produced in 2021 February and installed in 2021 July it includes : - AL-250-50S ISBM machine - Mitsubishi RV-3SB , 5 axes take out robot with complete cell / conveyor , controller and teaching pendant - Wittmann Dry MAX E60 PET dryer (2013) The machine has the following extra options: - EN (European Norm compatibility) specification (value: JPY2,500,000) All the other options: (value: JPY960,000) -Blow clamping short stroke - blow core short stroke - Lip cooling circuit - blow & bottom mold chiller cooling, The machine will be in production until 2023 January. It is possible to see in running.
used
1 used Strec blower, manufacturer SIDEL, type SBO 14 SERIES 2, built 2004, Siemens S7-400, capacity at 2.0L 16000 Fl/h - at 0.5L 21500 Fl/h,, in principle with shapes 0.5 L + 2.0 L round petaloid, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, Formling mouth 28 / 1810, operating hours 72958, production hours 34191. Maintenance by sidel and own technicians. Condition: neat/good. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Rafael/Compere, some spare parts. No cooling unit, no high-pressure compressor. Last production June 2019. Immediately available.
used
For sale PET blower with related format molds: - 500ml - 750 ml (Both version for interlocking cap and for trigger) - 1 Lt - 1.25 LT The machine has a production capacity of 510 bottles/h Seen and liked
used
1 used stretch blower, Manufacturer SIDEL, type SBO 14 SERIES 2, built 2001, Siemens S7-400, power at 0.5L 21500 Fl/h, basically with shapes 0.5 L square/round Champagne bottom, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, forming mouth 30/25. Maintenance by Sidel and own technicians. Condition: Oven chain not complete, but curve card removes new as spare part. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Ling Systems, some spare parts. No cooling unit, no high-pressure compressor. Last production March 2019. Immediately available.
used
LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L Produced ( 0,33 L 0,5 L 1,0 L 1,5 L 2,0 L) AUXILARY EQUIPM
used
10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system
used
We are selling blow molding machine Voith fisher maximum capacitity 100 Liter. We put on the machine new extruder 80mm with new gearbox, heaters and motor 37kw,also new accumulation head is instaled capacity 5 liter. Machine have new pneumatic, new electric cabinet with plc and main control unit with 15 inch touch panel. Also machine have new plc with 7 inch touch panel for wall thickness control.
new
Blow volume 0.2 - 10.0 ltr. Capacity: up to 1200 bottles/hour NEW MACHINE, 1-station machine, incl. preform bunker and feeder. Gergen Supplement: Compressor, refrigeration unit and moulds
used
Linear blow molding equipment for sale with a capacity of 6000 bottles/hour for 0.5 pet containers and 4000 bottles/hour for 1.5 pet containers. There are guarantees, no defects. Main equipment parameters 3500, 0 Ã 1450, 0 Ã 2000, 0 Release year 2020 Country of origin Shanghai, China, all packed and ready to ship. The price includes all the necessary additional equipment for the full cycle of production of pet containers. There are also 4 bottle designs included. We can connect everything at your facility and make start-up equipment. 1. Automatic feeding of the preform to the blow molding machine 2. High pressure compressor 3.2M³/3.0MPA 3. Low pressure compressor 2.0M³/1.0MPA 4. Dehumidifier and air purifier 5. Air buffer for 500 bottles. 6. Preform cooling equipment. 7. Filters Includes 4 preforms (included in the price) 1. Presform 500ml 4 bottles (2 ...
used
Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds
used
Sidel SBO 2F Blowmoulding machine Sidel with 2 molds of 2,400 bottles per hour, the condition of the machine is also excellent.