We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 1402)
new
New gas pressure regulator, Itron, DN80, RR16-80-82-12N-SL-IZN.1 Manufacturer: Itron Type: RR16-80-82-12N-SL-IZN.1 - DN80, PN16 - W DSO 35 mbar - 250 mbar Condition: The gas pressure regulator was purchased from a spare parts warehouse of a company and is still in its original packaging Dimensions: 43cm x 40cm x90cm high Weight: 63 kg
used
weight max. in kg: 2500 kgstroke: 5170 mmfork length: 1200 mm: 3450 mmNumber of working hours: hweight of the machine ca.: 5,0 tdimensions of the machine ca.: 4,0 x 1,26 x 3450 mGas forklift- Sideshift- extendable tines up to 2350mm- Drivers protection roof- complete Lighting system- very good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
DEMAG OVERHEAD CRANE 40ton x 34 M SPAN + 5.2 ,M CANTILEVER MHE-DEMAG DOUBLE GIRDER GANTRY CRANE TYPE ZVPW YEAR 2011
new
Lifting capacity: 1000 KgMagnetic field: 258 x 176 mmweight: 0,031 tdimensions: 0,26 x 0,18 x 0,16 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
OVERHEAD CRANE DEMAG 40 TON. X 18.6 M SPAN + 6.35 M CANTILEVER MHE - DEMAG DOUBLE GIRDER GANTRY CRANE, TYPE ZVPW, YEAR 2015.
new
Lifting capacity: 1500 KgMagnetic field: mmweight: 0,045 tdimensions: 0,44 x 0,22 x 0,25 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Recycling machine trade AGICOM- Pedergnana OG: Screw conveyor demonstration device - for the transport of granules. Construction: Metal construction with drive and transmission gear. The discharge height can be adjusted by adjusting the legs. electric motor 1.1 kW; Length 2.5 m
new
Lifting capacity: 2000 KgMagnetic field: mmweight: 80 Kgdimensions: 0,5 x 0,25 x 0,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
BALKANCAR T-10232 0,5T hoist was manufactured in 1970 in Bulgaria. The hoist is powered by a BALKANCAR КГ 1605-6 electric motor with a power of 0.75 kW and is designed to lift workpieces with a maximum weight of 500 kg, to a height of up to 12 metres. The buttons on the control pendant allows to determine the direction of movement of the workpieces in the up-down or right-left axis. The electric hoist has never been used and its weight is 154 kg. Technical specifications of the BALKANCAR T-10232 hoist - maximum lifting capacity: 500 kg - maximum lift height: 12 m - lifting speed: 8 m/min - travel speed: 20 m/min - cable diameter: 5.7 mm - electric motor: BALKANCAR КГ 1605-6 - power of electric motor: 0,75 kW - rotational speed of electric motor: 910 rpm - voltage: 200 V; 50 Hz - total weight of T 10232 device: 154 kg
new
weight max. in kg: 3500 kgstroke: 4,8 mmfork length: 1200 mmbattery: 80V/280AH Li-ionweight of the machine ca.: 5,0 tdimensions of the machine ca.: 3,94 x 1,23 x 2,25 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Hydraulic Motor TMT 500 FL Weight: 39 kg Availability: 2 Geometric Displacement: 494.8 cm³ Max Speed: 300 rpm Max Torque: 2240 N•m Max Output: 35 kW Max Pressure Drop: 325 bar Max Oil Flow: 125 l/min Max Starting Pressure with Unloaded Shaft: 6 bar Min Starting Torque: 1530 N•m In stock 2 pcs
new
0: 10000 kgheight of stroke: 130 mmTotal height: 290 mmweight: 21 kgdimensions: 190 x 260 x 290 mmHydraulic machine jackFoot height 22mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
SKF spherical roller bearing 24040 CC C3 W33 Brand new and unused (from a canceled order, stored since 2019).
new
weight max. in kg: 2500 kgstroke: 4,8 mmfork length: 1200 mmbattery: 80V / 205AH LI-ionweight of the machine ca.: 3,9 tdimensions of the machine ca.: 3,57 x 1,15 x 2,16 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
SKF deep groove ball bearing 618/710 MA/C3
new
0: 5000 kgheight of stroke: 120 mmTotal height: 243 mmweight: 15 kgdimensions: 170 x 230 x 250 mHydraulic machine jackFoot height 19mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
SKF deep groove ball bearing 618/600 MA/C3 Condition - See photos. We sell it as a damaged item.
new
weight max.: 1000 kgclamping width: 2000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Offer here a linear actuator with 30cm stroke and 8cm piston diameter. Ready to use with check valves, flanges, 16mm QuickLocks. It also comes with a plant dismantling and worked without any problems until the expansion. It can be seen in Weyhe near Bremen.
new
0: 600 kggear diameter: 75 mmweight: 15 kgdimensions: 700 x 400 x 150 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
TECHNICAL SPECIFICATIONS Manufacturer: THYSSEN KRUPP Fördertechnick Description: Chain conveyor, scraper conveyor Type: OTK 440/1200x9408 Design: stationary, heavy version Year of construction: 2001 Drive type: slip-on geared motor, planetary gear Drive power: 55 kW Length chain conveyor: 9,400 mm Chain conveyor width: 1,200 mm
new
Lifting capacity: 100 KgMagnetic field: 70 x 60 mmweight: 5 Kgdimensions: 100 x 120 x 120 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Facility consisting of: Blfacgia0ex 6 modules length 5,750 mm - Capacity 6 pallets per segment 2 modules length 3,000 mm - Capacity: 3 pallets per segment PLC control
new
0: 20000 kgheight of stroke: 130 mmTotal height: 327 mmweight: 33 kgdimensions: 250 x 280 x 330 mmHydraulic machine jackFoot height 26mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Ship unloading system TA 12/15 FA 38 of the manufacturer NEUERO Engelbrecht + Lemmerbrock GmbH & Co., Melle. Built in 1988 It is a pneumatic suction system for the extraction and conveyance of grain or similar pneumatically conveyable bulk materials from ships. Via a telescopic swivel arm and a suction nozzle, the material to be conveyed is sucked in by the air flow generated by the blower and conveyed into the suction separator. There, the material to be conveyed is separated from the suction air flow and discharged via the rotary valve. All motion drives of the telescopic boom are hydraulic. Electrical connection: 380 V Technical documentation of the manufacturer and various invoices for replacement parts available. A magnetic separator was retrofitted. The rotary valve was replaced in 2018 (EUR 8,875) and has not been used much since then. New filters available. ...
used
weight max. in kg: 2000 kgstroke: 6510 mmfork length: 950 mm: 2834 mmNumber of working hours: ca. 600 hweight of the machine ca.: 4,2 tdimensions of the machine ca.: 2,65 x 1,3 x 2,85 mDiesel forklift- Diesel particulate filter- Sideshift- Fork adjustment- Triplex lifting mast- Drivers protection roof- Roof window including roof wiper system- many more additional options- MINT CONDITIONThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Tipping body Manufacturer: Bauer
new
Lifting capacity: 300 KgMagnetic field: 228 x 122 mmweight: 0,016 tdimensions: 0,23 x 0,122 x 0,112 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Made in Germany
new
Lifting capacity: 600 KgMagnetic field: 228 x 122 mmweight: 0,022 tdimensions: 0,23 x 0,122 x 0,112 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.