m 91 used for sale

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

turning diameter:760 mm turning length:1.524 mm spindle speeds::3.300/12.000 MILL/3.300 spindle diameter:78/78 mm no. of tools in magazin:80 tool taper:Capto max. tool length:400 mm max. tool diameter:125/90 mm weight of the machine ca.:13,4 t Machine with Mazak Matrix CNC control Main and counter spindles Milling unit (milling spindle) Kitagawa QJ-312 dual-action chuck Pallet pool with robot IKZ Exhaust system not included

x-travel:630 mm y-travel:560 mm z-travel:560 mm total power requirement:10 /15 kW weight of the machine ca.:6500 kg dimensions of the machine ca.: 4,4 x 5,4 x 2,9 m Table dimensions:1000 x 610 mm Loading:400 kg rapid traverse::X 26, Y 26, Z 20 m/min speeds::20 - 12.000 min -1 tool taper:SK 40 Number of tools:20 ( 2 x 10 ) St. control:CNC MillPlus/TNC430 Documents:vorhanden

bore capacity in steel (diameter):40 mm arm length:1200 mm workpiece height max.:1227 mm surface area:1475 x 900 mm no. of flutes:3 groove width:25/ 50 mm spindle cone:MORSE 4 number of spindle speeds:45- 2800 U/min spindle headstock:Bew.Arm : 945 mm with vertical adjustment:Arm 710 mm spindle diameter:35 mm bore depth:300 mm total power requirement:3,0 kW weight of the machine ca.:2800 kg dimensions of the machine ca.:2290 x 910 x 2860 mm

bore capacity in steel (diameter):40 mm arm length:1200 mm workpiece height max.:1227 mm surface area:1475 x 900 mm no. of flutes:3 groove width:25/ 50 mm spindle cone:MORSE 4 number of spindle speeds:45- 2800 U/min spindle headstock:Bew.Arm : 945 mm with vertical adjustment:Arm 710 mm spindle diameter:35 mm bore depth:300 mm total power requirement:3,0 kW weight of the machine ca.:2800 kg dimensions of the machine ca.:2290 x 910 x 2860 mm

x-travel:700 mm y-travel:450 mm z-travel:500 mm total power requirement:23,4 kW weight of the machine ca.:3100 kg dimensions of the machine ca.:3200 x 4000 x 2500 mm tool taper:ISO 40 feeds:0,2 - 0,6 - 0,12 mm/U spindle speeds::20 - 3150 , direkt programmierbar /min feed range:1 - 3000, in B=0,01 - 3 U/min rapid traverse in x-y-z axis:6m/ min, B = 7,6 U/min work table::NC Rundtisch(B-Achse) D=630 mm, 9T-nuten control:CNC432

x-travel:500 mm y-travel:400 mm z-travel:340 mm work table::800 x 400 mm control:Numerik CNC - H 646 spindle turning speed - stepless:20 - 3000 U/min total power requirement:14 kW weight of the machine ca.:2400 kg dimensions of the machine ca.:2100 x 1800 x 2400 mm

x-travel:600 mm y-travel:500 mm z-travel:450 mm turning speeds:5 - 5000 U/min quill stroke:90 mm total power requirement:9 kW feed range:0-10.000 mm/min weight of the machine ca.:3260 kg dimensions of the machine ca.:2200x2800x2000 mm spindle:6 kW vertical milling head:SK 40 CNC universal milling machine without toolchanger, Equipped with CNC-Heidenhain TNC 407 el.handwheel coolant device

x-travel:700 mm y-travel:700 mm z-travel:700 mm turning speeds:18.000 1/min max. torque on the spindle:110 / 84 Nm tool taper:SK 40 control:HEIDENHAIN iTNC 530 tool change unit:180 fach size of pallet:500 x 500 mm mm max. workpiece weight:600 kg spindle:34 / 28 kW rapid traverse:60 m/min total power requirement:68 kVA weight of the machine ca.:10,5 t dimensions of the machine ca.:9,5 x 7,5 x 3,4 m dimensions for transport:4,3 x 2,4 x 2,6 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyo ...

x-travel:1.250 mm y-travel:710 mm z-travel:710 mm table surface area:1500 x 800 mm table load capacity:800 kg turning speeds:12000 1/min spindle drive:15 / 10 kW control:MILLPLUS iT HEIDENHAIN spindle taper:SK 40 tool change unit:60 Pos. capacity:44 kVA weight of the machine ca.:10,5 t dimensions of the machine ca.:3,5 x 2,65 x 2,65 m 5 axis simultaneously machining center, B-axis (-120° / +30°), NC-rotary-table integrated in rigid table, direct measuring system, 3D probe infrared, HEIDENHAIN TS 640, internal coolant supply 40 bar, 600l, flushgun, chipconveyor, mode 4, 3D quickset software (no hardware), Higher noise in rush on X-axis and roundtable approx. 48.500 hours "machine on" / approx. 18.000 hours "spindle on"

x-travel:800 mm y-travel:800 mm z-travel:800 mm turning speeds:35-10.000 1/min spindle:37 / 30 kW max. torque on the spindle:525 / 206 Nm Tool bore:BT 50 rapid traverse:60 m/min tool change unit:160 Pos. size of pallet:500 X 500 mm control:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kg workpiece height max.:1.000 mm interference area:900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, accessories for both machines: 18 pallets, approx. 300pcs. toolholders, miscellaneous devices for workpiece-clamping...

x-travel:800 mm y-travel:800 mm z-travel:800 mm turning speeds:35-10.000 1/min spindle:37 / 30 kW max. torque on the spindle:525 / 206 Nm Tool bore:BT 50 rapid traverse:60 m/min tool change unit:160 Pos. size of pallet:500 X 500 mm control:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kg workpiece height max.:1.000 mm interference area:900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply,

x-travel:730 mm y-travel:560 mm z-travel:560 mm turning speeds:18.000 1/min control:HEIDENHAIN iTNC 530 tool adaptor:SK 40 tool magazin::24 Pos. total power requirement:52 kVA weight of the machine ca.:6,7 t 5-axis simultaneously, NC-roundtable (dia 600mm) integrated in rigid table (1.000 x 600mm), max. table load 500kg, controlled NC-milling head (B-axis), -120 to +30°, 3D touch probe TS 640, BLUM laser, el. hadwheel, mode 4, safety package for power failure, chipconveyor, NO INTERNAL COOLANT SUPPLY ! approx. 87.000h "machine on", approx. 15.000h "program run" latest known spindle change: 2022

grinding length:600 mm grinding width:300 mm workpiece height:450 mm total power requirement:8 kW weight of the machine ca.:2,2 t dimensions of the machine ca.:2,8 x 3,0 x 2,0 m grinding spindle speed:1440 / 2905 U/min with magnetic plate 600 x 200 mm autom. vertical feed coolant attachment Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.

x-travel:1100 mm y-travel:900 mm z-travel:1250 mm b-axis:360 000 x 0,001 ° milling head speed:1 - 10000 U/min spindle taper: ISO:50 rapid traverse:60 m/min pallet size::630 x 630 total power requirement:37 kW weight of the machine ca.:25 t with CNC control SIEMENS 840 D autom. toolchanger 165 pockets twin pallets 630 x 630 mm max. pallet load 1500 kg through spindle coolant chip conveyor and coolant attachment make KNOLL

drum diameter:400 mm revolutions per minute:980 U/min total power requirement:2,2 kW Lanner batch wringer ME41-2 for deoiling of metal chips -turnkey delivery and easiest handling -very long service life, operation free of vibrations -compact and easy to maintain, i.e. low maintenance costs and quick return of investment -standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control -including control cabinet laterally placed, i.e. not in swivel range of crane -drum volume 35 Liter/max. 50 kg -rotation speed max. 980 min-1 -power 2,2 kW Painting: RAL 5012 light blue (batch wringer, crane support) RAL 1003 signal yellow (traverse) RAL 7035 light grey (control cabinet) In each case silk gloss. Changes after consultation. Also included in the scope of delivery: -Crane support with swivel arm: mounted on the side ...

Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2016 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 3 x Y-axis, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot, manufacturer HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2019 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot make HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Working height: variable from 0,5mm ? 150mm adjustable Working width: 1150 mm Maximum part weight: 300 kg Wide belts with abrasive belt unwinding: 2200 mm As standard with vacuum hold system, optional with magnetic hold system Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and a ...

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining unit ...

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Machine is suitable for heavy-duty use. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide belts with abrasive belt unwinding: 3250 mm As standard with vacuum hold system, optional with magnetic hold system By using 3250 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can acc ...

Gaspardo 6m seed drill with Howard-Nordsten seedbed combination, Technical specifications:, - Working width: 6m, - approx. 120ha used, - Sowing technology: Disc coulter with pressure rollers for precise sowing, - Carrier: Howard-Nordsten seedbed combination

Weld-on part with VTN / Martin old small mount, Dimensions of the mount:, Bolt diameter: 50 mm, Handle/mounting width: 190 mm, Bolt spacing [center - locking plate]: 320 mm

NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit

Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU025Y184 MakeRobert Bosch No.267 606 Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Volume250 Ltr. Motor3 KW Specified Features - Tumbler mixer MaterialStainless steel 1.4305 (303) Tumbler mixercheck Polished insidecheck Capacity250 l. Diameter800 mm Cylindrical length750 mm Inletø 250mm Outletø 90mm With motor3,0 kW 380 V Information With switchgearcheck (as is) Floorspace2,8 x 1,0 m Total height2,7 m Weight900 KgTumbler mixersDiscountRobert BoschMixers > Tumbler mixersDiscountBrand > Robert Bosch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU041B216 MakeSegler Förderanlagen GmbH Berge TypeFreifallmischer FM-100L No.13 850 A Year of construction2005 LocationBarneveld Main Features MaterialStainless steel Volume100 Ltr. Motor4 KW Specified Features - Tumbler mixer Tumbler mixerContainer mixer (1x) Capacity100 Ltr Length/Depth640x640mm Cylindrical length140mm Conical length350mm Inletdia. 200mm Outletdia. 70mm With brake motor4,0 KW, 400/690 Volt + 0,75 KW, 230/400 Volt With variable speed drive(frequency converter) With lump breakercheck With motor1,5 KW, 220-240/380-420 Volt (1395 Rpm) With safety gatescheck MaterialStainless steel Information With switchgearcheck Floorspace3,0x2,3 M Total height2,3 M Weight1900 KGTumbler mixersDiscountSeglerMixers > Tumbler mixersDiscountBrand > Segler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared t ...

General SKU144P678 LocationBarneveld MakeNiro Atomizer (Patterson Kelley) Type20 CLS ZZ + LB+P No.080-0027-00 Technical specs Capacity17000 liter/hour Main Features MaterialStainless steel Motor8.6 KW Specified Features - Tumbler mixer MaterialStainless steel 1.4301 (304) Zig-Zag tumbler mixercheck -agglomerator (1x) Continuous mixercheck Diameter550 mm Length/Depth1750 mm, Agglomerator Dia. 950 x 850 mm Inlet400 x 400mm Outlet600 x 320mm With motor7,5/8,6 KW, 660 Volt Speed mixer20 rpm With liquid injectioncheck With lump breakercheck With motor2,2/2,5 kW 220/480 Volt and 0,37/0,45kW 220/480 Volt With safety gatescheck Information Year of construction1989 Mounted on mild steel framecheck With switchgearcheck Floorspace4,1 x 1,4 m Total height2,1 m Weight3000 kgTumbler mixersDiscountNiro AtomizerMixers > Tumbler mixersDiscountBrand > Niro Atomizer What you ...

General SKU024B115 MakeServolift/Scholl TypeNG-1200 No.90117 Year of construction1990 LocationBarneveld Main Features MaterialStainless steel Volume800 Ltr. Specified Features - Tumbler mixer MaterialStainless steel 1.4301 (304) Tumbler mixerSystem Sandoz-Scholl (1x) Polished insidecheck Capacity1200 Ltr, Useful capacity 800 Ltr Diameter1400mm Length/Depth1900mm Inlet/manhole dia. 390mm Outletdia. 250mm With motor(hydraulic drive unit) 7,5 KW, 380/660 Volt Information With switchgearcheck Floorspace1,4 x 1,6 M (+ 1,4 x 0,7 M hydr. unit) Total height4,8 M Weight1500 + 370 KGTumbler mixersDiscountServoliftMixers > Tumbler mixersDiscountBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...

General SKU253M221 LocationBarneveld MakeBauermeister & Co. Norderstedt TypeUT-63 Main Features Motor185 KW Inlet diameter1200 mm Width400 mm Specified Features - Fine Impact Mill MaterialMild steel, Stainless steel 1.4462 (Duplex2205) Fine Impact Mills Turbo millcheck Rotor sizeDia. 1200x400mm Grinding room sizeDia. 1200x400mm With sieve cagecheck (Pore size ø 220 µm) With grinding trackcheck Housing dimensions 2000x0,55x1800 mm InletDia. 400 mm Motor185,0 KW, 415 Volt Information No.940785 Year of construction1989 Mounted on framecheck Floor space3,9x1,5 m Total height3,0 m Weight8500 kg Extra Specifications-- RECONDITIONED -- Fine Impact MillsReconditionedBauermeisterMills > Fine Impact MillsReconditionedBrand > Bauermeister What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to an ...

General SKU095T577 MakeZondervan Sneek No.S-2109-01 Year of construction1989 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket1 Bar Main Features MaterialStainless steel Volume100 Ltr. Motor1.5 KW Specified Features - Tumbler mixer Tumbler mixer(1x) Capacity100 Ltr Diameter660mm Cylindrical length420mm Inletdia. 270mm Outletdia. 50mm With jacketcheck Max. temperature200 Degr. C. With motor1,5 KW, 220/380 Volt Speed mixer± 27 Rpm MaterialStainless steel 1.4401 (316) Information With switchcheck Floorspace1,5 x 0,8 m Total height1,4 m Weight430 kg Extra SpecificationsThe double jacket on this machine can only be used for cooling or heating, before or after the  :turning process. Not during! The same applies to the vacuum Tumbler mixersTea, herbs & coffeeZondervanMixers > Tumbler mixersIndustries > Food & Feed > T ...

General SKU036S123 MakeGladiator TypeMY 7/4743 No.689 LocationBarneveld Material Jacket materialMild steel Main Features MaterialStainless steel Volume300 Ltr. Motor9.5 KW Specified Features - Tumbler mixer MaterialStainless steel 1.4401 (316) V-type tumbler mixercheck Capacity300 l. (total capacity) Diameterø 550 mm Length/Depth900/450 mm Inlet2x ø 550 mm Outletø 200mm With jacketcheck With motor5.5 kW 400 V 960 rpm With variable speed drivecheck Speed mixer6 rpm With lump breakercheck 1000 rpm With motor4 kW 400V 960 rpm Information Mounted on mild steel framecheck Floorspace3,0 x1,4 m Total height2,4 m Weight1600 kg Extra SpecificationsWITH INTENSIFIER BAR - OVERHAULED - Tumbler mixersDiscountGladiatorMixers > Tumbler mixersDiscountBrand > Gladiator What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to n ...

General SKUR0171 LocationBarneveld MakeEgli Butschwil (CH) TypeK.MI. Main Features MaterialStainless steel Volume2000 Ltr. Motor22 KW Specified Features - Tumbler mixer Double cone tumbler mixercheck Capacity2000 ltr Diameter1900mm Conical length950mm Inlet680x375mm Outletdia. 100mm With motor400/690 50 hz 22 kw 1470 rpm - 440/460 60 hz 25 kw 1765 rpm MaterialStainless steel 1.4401 (316) Information No.1-71 Year of construction1966 Floorspace3,1x2,2 M Total height2,7 M Weight2000 KgTumbler mixersSpicesTea, herbs & coffeeButschwilMixers > Tumbler mixersIndustries > Food & Feed > SpicesIndustries > Food & Feed > Tea, herbs & coffeeBrand > Butschwil What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nethe ...

Used Kosme Monocombi 2T Hot Melt Case Packing Monoblock This second hand Kosme casepacking monoblock is designed for reliable bottle grouping and carton closing within a compact industrial packaging footprint. Built to support demanding beverage production environments and other bottling applications, it handles bottle collation into 6-bottle cartons and applies hot melt closure in a single integrated unit. Its monoblock architecture reduces footprint, simplifies integration on a used bottling line, and streamlines operation and maintenance. Manufactured by Kosme, a recognized brand in bottling and packaging machinery, this model features an additional bottle centering device tailored for Authentique bottle handling, improving infeed stability and pack quality. Suited to both PET and glass bottles, it aligns well with beverage production requirements where consistent case presentation, s ...

Used Automatic Rotary Labeling Machine BRB GLOBUS 4200 bph The Used Automatic Rotary Labeling Machine BRB GLOBUS 4200 bph, model MEGA ADE 633 – CCW, applies self-adhesive labels to glass bottles with precision. Moreover, BRB GLOBUS manufactured this machine in 2009, ensuring it operates at 4200 bottles per hour (bph). It remains fully functional and ready for installation in a production line. Structural and Dimensional Features The Used Automatic Rotary Labeling Machine BRB GLOBUS 4200 bph measures 2550 mm in length, 1800 mm in width, and 2050 mm in height, with a net weight of 1800 kg. Additionally, its mechanical structure provides stability and precision during the labeling process. The machine rotates clockwise, which optimizes workflow in industrial production lines. Furthermore, the movement system operates using mechanical cams, allowing precise control over bottle movement  ...

This 5-axis Mazak INTEGREX i-200 S was manufactured in 2017. It features full 5-axis simultaneous machining, a maximum machining diameter of Ø658 mm, and a maximum machining length of 1519 mm. The machine includes a robust tool magazine capacity of 72 positions and is equipped with both main and second spindles for enhanced capabilities. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX i-200 S turn-mill centre. Contact us for further details.

This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II INFO was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II INFO vertical machining centre we have for sale. Contact us for further details.

Used CNC Swiss type lathe STAR SR32-JN New, year 2015 | control, make Fanuc, series 32i-B, | 7 axes (X/Z/Y/C1/X1/Z1/C2, | bar-Ø max. 32 mm, | turning length max. 80 mm, | main spindle, speed max. 7.000 rpm, C-axis 0,001 degree, | backspindle Ø max. 32 mm, | speed max. 7.000 rpm, C-axis, | tool holder for a total of 23 tools (linear tool holder, front attachment, rear machining), | parts conveyor belt, | Mayfran chip conveyor, | Service-Set Emulsionspackage | barloader magazine FMB turbo 3-36/3200 / A /accesories to support | turning without guide bush. | Use of coolant in the machine: emulsion | The machine can be inspected under power by appointment. | Changes and errors in the technical data and information and subject to prior sale!

Year of manufacture: 2011 | Machine operating hours: 56,000 hrs | Machine automatic cycle hours: 48,000 hrs | FANUC 31i CNC control – Model A, 7-axis | Technical data | - Number of axes: 7 | - Number of spindles: 2 | MAIN SPINDLE | - Max. bar diameter: 60 [mm] | - Spindle speed: 5000 [rpm] | - Spindle drive power: 7.5 [kW] | COUNTER SPINDLE (on the turret) | - Max. bar diameter: 42/ (60) [mm] | - Spindle speed: 5000 [rpm] | - Spindle drive power: 3.7 [kW] | Powered tools (turret): | Tool drive power: 3.7 kW | Max. speed: 6,000 rpm | Rear-end machining: | 4 fixed tool stations | Up to 14 tools / capacity possible | Bar loading magazine FMB Turbo 5-55 / 3200 / A | Year of manufacture: 2008 | Bar diameter: 5 - 55 [mm] | Bar length: 3,200 [mm] | Chip conveyor | The machine can be viewed by appointment. | Subject to changes and errors in the technical data and specifications, as well as pri ...

Year of manufacture: 1999 | Control system: FANUC Series 18-T (dual-channel control) | Technical specifications | Max. bar diameter: 51 mm | Max. turning length: approx. 125 mm | Travel ranges: X1 / X2: 150 mm / 115 mm | Z1 / Z2: 380 mm / 125 mm | Y-axis: +/- 40 mm (upper turret) | Spindles (main & counter spindle) | Speed range: 135 – 5,000 rpm (both spindles) | Drive power: 11 kW / 15 kW (main spindle) | C-axis: 0.001° on both spindles for full contour machining | Tool system (2 x turrets) | Turrets 1 (top): 12 stations (all driven, incl. Y-axis) | Turrets 2 (bottom): 12 stations (all driven) | Spindle speed: max. 3,200 rpm | Loading magazine: IEMCA BOSS 552-HD | Diameter range: 5 mm to 51 mm | Bar length: up to 3,200 mm | Chip conveyor | Batec fire suppression system | The machine can be viewed by appointment. | Subject to changes and errors in the technical data and specification ...

used MORI SEIKI NL 2500/1250 CNC lathe, manufactured in 2006, is for sale. It is equipped with a MORI SEIKI MSX 850III / MAPPS III control system and an IRCO SIMAG loading magazine for automatic bar feeding. | Technical specifications | Control system: MORI SEIKI MSX 850III / MAPPS III | Country of origin: Japan | Type: Slant-bed CNC lathe | Centre distance: 1,250 mm | Max. turning length: 1,298 mm | Max. turning diameter: 356 mm | Standard turning diameter: 275 mm | Swivel diameter over bed: 923 mm | X-axis: 260 mm | Z-axis: 1,345 mm | Spindle speed: up to 4,000 rpm | Spindle bore: approx. 80 mm | Turret: 12-station | Number of turrets: 1 | Chip conveyor | Powered tools | C-axis | Y-axis | Machine weight: 7,600 kg | Machine dimensions: 5,000 x 2,300 x 2,400 mm | The machine can be viewed in operation by appointment. | Subject to changes and errors in the technical data and specification ...

Year of manufacture: 2018 | Condition: Very good, ready for operation | Availability: Short notice | Brief description | A Citizen Miyano BNE-51MSY CNC short turning machine in MSY design with main and counter spindle and Y-axis is for sale. | Features/highlights | Y-axis | 2 tool turrets, each with 12 stations | Driven tools | Simultaneous machining possible | High rigidity and process reliability | Technical data | Max. bar capacity: Ø 51 mm | Max. turning diameter: approx. 165 mm | Max. turning length: approx. 380 mm | Main spindle speed: up to approx. 5,000 rpm | Counter spindle speed: up to approx. 5,000 rpm | Control: Mitsubishi MELDAS | Machine weight: approx. 8,000 kg | Machine fully functional, both electrically and mechanically | Complete technical documentation available | The machine can be viewed by appointment. | Subject to changes and errors in the technical data and spec ...

Year of manufacture: 2015 | Key Features: | Manufacturer: Mitutoyo Corporation | Model: PJ-A3000 | Projection Screen: Ø 315 mm | Magnification: 10× standard (optional 20×, 50×, 100×) | Measurement Accuracy: ±0.001 mm (XY resolution) | Table Travel: Various measuring ranges depending on model (up to 200×100 mm) | Illumination: Halogen lamp 24 V / 150 W | Functions: Digital XY readout, angle measurement, RS?232C interface | Max. Workpiece Height: approx. 92.5–123.5 mm | Special Features: Telecentric optical system for distortion-free projection, rotatable table, manual focusing | Condition: Used, tested, and fully functional. | Applications: Ideal for metal and plastic processing, training, laboratories, and precision measurements. | The machine can be inspected under power by appointment. | Technical specifications are subject to change, errors and prior sale reserved.

Year of manufacture: 2018 | Operating hours: 47548 | Machining time: 31241 | Status: October 2025 | Control: Fanuc 30i B | Maximum flexibility of the MULTISPRINT thanks to its modularity and Y-axes in every position | Use of driven tools on all spindle positions | Y-axis on all spindle positions as standard | SWISSTYPEkit for short and long turning up to 170 mm length | Chuck or bar machining: bars from 4 to ø 36 mm, chuck components up to ø 50 mm Double rear and off-center machining | Machine type: Multi-spindle automatic lathe | SWISSTYPE machining: up to 170 mm turning length | Control: FANUC Series 30i | Maximum flexibility thanks to modularity and Y-axes on all spindle positions | Use of driven tools on all spindle positions | Machining: Bars from Ø 4 – 36 mm, chuck parts up to Ø 50 mm | Double rear and off-center machining possible | Performance data | Feature Value | Max. wo ...

Year of manufacture: 2004 – major overhaul by manufacturer CHIRON in 2013 | The machine underwent a complete factory overhaul by CHIRON in 2013. | Operating hours: approx. 80,374 h | Spindle replacement: March 2021 – spindle hours: approx. 8,000 h | Last maintenance performed: January 2024 | Technical Specifications: | Control: Siemens 840D (PCU50, NCU572.4) | NC swivel head | High-speed package: Motor spindle up to 12,000 rpm, 140 Nm | Travels: X 6,000 mm / Y 630 mm / Z 550 mm | Rapid traverse in X / Y / Z: 60 m/min | Chip-to-chip time: 3.0 sec (3.3 sec DIN) vertical / 4.7 sec (5.0 sec DIN) horizontal | Production package: | Scraper belt conveyor, discharge height 1,050 mm | Preparation for internal coolant supply (IKZ) | Vacuum rotary filter KNOLL VRF250 (for steel, cast iron, aluminum, plastic, brass) | High pressure 70 bar with HP pump and variable valve | Automatic loading doors ...

6-colour format: 720 mm<br>TYP: 500, 6 INTAGLIO + 1 FLEXO, PAPIER & FOLIEN 50-150 GSM, ROLLS of 800 MM WIDTH: 750 MM;<br><br>Still in operation: Yes<br>Verf Gbar: immediately

6-colour format: 900 MM<br>ROTOPAK 1/S, 50-200 G, WEB WIDE: 820 MM, ROLLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6-colour format: 900 MM<br>ROTOPAK 1/S, 50-200 G, WEB WIDE: 820 MM, ROLLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

<br>DECOIL DURCHMESSER: 1000 MM, AUFWICKLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .