m 3063 used for sale

General2-axes universal turning center with fixed tools; Control: Control Fanuc 0i-F Plus with iHMI and Manual Guide i Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup modeAlternative Speed TurningTechnology cycle Alternate Spindle Speed (Turning) for the application of an alternate speed for vib ...

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Main drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWorking areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmZ travel730 mmX travel300 mmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm

Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmGeneral2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Main drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Drive power (100% DC)15 kWType of main driveAC Drive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmMax machining diameter460 mmSwing diameter over X linear guideways520 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWSpeed range-3500 rpmDrive power (40% DC)19,5 kWTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmTropical PackageTropenpaket für Maschine Option beinhaltet: - aktives Kühlaggregat für Schaltschrank - zusätzlicher Ventilator im Bedienpult Empfohlen ab 35°C bis max. 40°C Umgebungstemperatur.Signal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: interventi ...

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode

This 3-axis MORI SEIKI SL-403BMC/800 was manufactured in 2002. It features a maximum turning diameter of 650 mm and a maximum turning length of 863 mm. The machine offers an X-axis travel of 345 mm and a Z-axis travel of 995 mm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-403BMC/800 horizontal turning machine we have for sale. Contact us for further details.

This 3-axis DMG MORI CLX450 was manufactured in 2019. It features a 12-station tool turret and an integrated sub-spindle for enhanced productivity. The machine is equipped with a 3-jaw chuck on the main spindle. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX450 horizontal turning machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2018. This Mazak QUICK TURN 200MA L features a maximum workpiece diameter of Ø 360 mm and a maximum workpiece length of 535 mm. It is equipped with a spindle speed of 5,000 rpm and a turret with 12 VDI positions. If you are looking to get high-quality turning capabilities, consider the Mazak QUICK TURN 200MA L machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 1998. This DMG Mori Seiki CL-200B features an X-axis travel of 398 mm and Z-axis travel of 214 mm. It is equipped with a Renishaw tool setter and a workpiece catcher that has never been used. The machine has approximately 10,000 operating hours and has always been operated in a single-shift environment. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki CL-200B machine we have for sale. Contact us for further details.

This 5-axis Mazak INTEGREX J-200 S was manufactured in 2021. It features a maximum machining diameter of 500 mm, X-axis travel of 450 mm, Y-axis travel of 200 mm, and Z-axis travel of 960 mm. The machine is equipped with a 36-tool magazine and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX J-200 S machine we have for sale. Contact us for further details.

Bread slicer MHS Ideal L Stainless steel version Simple technology only DGUV V3 tested by us Connection 400V, 16A CEE plug Used machine cleaned & SAB tested with warranty + spare parts service

This 9-axis Muratec MT200 multi-spindle turning machine was manufactured in 2019. It features a maximum bar capacity of 65 mm and a chuck size of 210 mm. The machine includes an impressive maximum feed speed of 24 m/min on the X-axis and 36 m/min on the Z-axis. If you are looking to get high-quality turning capabilities, consider the Muratec MT200 machine we have for sale. Contact us for further details.

Lathe Mori Seiki SL25

This 4-axis MORI SEIKI RL2500 was manufactured in 2003. It features a maximum turning diameter of 400 mm and includes two turrets with 12 stations each, providing efficient machining capabilities. The machine is equipped with a Mori Seiki MAPPS MSX-501 control and has a spindle speed of 3500 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI RL2500 multi-spindle turning machine we have for sale. Contact us for further details.

This DMG MORI CLX 350 V3 was manufactured in 2023. A universal turning machine featuring driven tools and a C-axis. It includes a hydraulic 3-jaw chuck D210mm, a 12-slot servo tool turret holder VDI 30 with 12 driven tool stations, and a hollow clamping device with a max. bar capacity of D65mm. A great opportunity to buy this DMG MORI CLX 350 V3 universal turning machine. Contact us for further details regarding this machine.

This 3-axis DMG MORI CLX 450 V3 was manufactured in 2022. It features a maximum turning diameter of 400 mm and a Z-axis travel of 600 mm. The machine is equipped with a powerful spindle capable of 4000 rpm and includes 12 driven tool stations for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V3 horizontal turning machine we have for sale. Contact us for further details.

This 7-axis STAR MICRONICS SR-32JII-typeA was manufactured in 2017. It features a bar capacity of Ø32 mm and includes a main spindle and sub-spindle with C axis. The machine is equipped with a synchronized guide bushing and a gang tool plate with 6 positions. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SR-32JII-typeA swiss type turning machine we have for sale. Contact us for further details.

This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum workpiece diameter of 175 mm and a maximum bar diameter of 65 mm. The machine is equipped with two turrets, each with 12 driven tool positions, and offers a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details.

This 3-axis MURATA MURATEC MD 120 was manufactured in 2021. It features a maximum self-centering diameter of Ø 210 mm and a spindle speed of 4,500 rpm. The machine is equipped with a tool turret that has 2 x 10 positions and a motorized turret with 10 motorized positions. If you are looking to get high-quality turning capabilities, consider the MURATA MURATEC MD 120 horizontal turning machine we have for sale. Contact us for further details.

CNC Machining Center Hedelius T7 – 2600 1 R Magnum Control: Heidenhain TNC 7 Year of manufacture: 2023 Internal machine no. 56 Travels: X-axis F/H 2,600 / 2,030 mm Y-axis 750 mm Z-axis F/H 695 / 800 mm Pendulum operation: 760 / 1,300 mm Total clamping area 3,080 x 750 mm Table load: approx. 2,500 kg Integrated rotary table Ø 750 mm Interference circle diameter 1,100 mm Workpiece weight approx. 500 kg Mount: SK 40 Tool magazine: 50-fold Spindle speed: 50 - 14,000 rpm Power: 29kW Facilities - KinematicsOpt (incl. calibration ball) - Handheld control unit HR 510 FS - Compressed air nozzle on the spindle head - Inclined bed belt filter system 900l - Internal cooling (IKZ) 25 bar - Infrared Receiver M&H - 3D Infrared Probe M&H 25.50 - Touchsetter - Exhaust air filter - Partition wall - Blow-off guns - Rinsing guns

This 5-axis Okuma LB3000EX MYW was manufactured in 2008. It features a maximum turning diameter of 360 mm and a Z-axis travel of 1000 mm. The machine is equipped with a twin spindle configuration and a control system OSP-P200. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000EX MYW horizontal turning machine we have for sale. Contact us for further details.

This 9-axis Okuma MAC TURN 350-W was manufactured in 2011. It features a maximum turning diameter of 550 mm and a distance between centers of 1500 mm. The machine is equipped with a powerful main spindle and sub-spindle, both capable of 3800 rpm, and a milling spindle speed of 12,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MAC TURN 350-W turn-mill centre we have for sale. Contact us for further details.

This 4-axis MORI SEIKI SH633 was manufactured in 2001. It features an X-axis travel of 840 mm, Y-axis travel of 760 mm, and Z-axis travel of 840 mm. The machine is equipped with 2 pallets, each measuring 630 x 630 mm, and can handle a maximum workpiece weight of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SH633 horizontal machining centre we have for sale. Contact us for further details.

For sale here is a UPF Filter 50 exterior for the MWM 2020 V12 from our stock. Item number original: 12142719 Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how with them. Draw on over 25 years of professional exper ...

This 4-axis MIKRON VCE 750 was manufactured in 1998. It features impressive travels of 762 mm in the X-axis, 510 mm in the Y-axis, and 560 mm in the Z-axis. The machine includes a tool magazine with 20 positions and a maximum table load capacity of 1,360 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON VCE 750 vertical machining centre we have for sale. Contact us for further details.

This 5-axis DMG MORI CMX 50 U + PH150 was manufactured in 2019. It features an X-axis travel of 500 mm, Y-axis travel of 450 mm, and Z-axis travel of 400 mm. The machine is equipped with a powerful spindle capable of 12,000 RPM and a tool magazine for 60 tools. It includes a PH150 automationsystem. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 50 U + PH150 vertical machining centre we have for sale. Contact us for further details.

Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Module cutter: Hobbing cutter -Type: Mod.3.5 Ø 85 mm -Hole: Ø 32 mm -Dimensions: Ø 85 x 85 mm -Weight: 1.8 kg

This 5-axis DMG MORI DMU 80T was manufactured in 2004. It features impressive travels of approximately 980 mm in the X-axis and 630 mm in both Y and Z axes. The machine includes a 4-position tool changer and operates with TNC 5.0 control. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 80T vertical machining centre we have for sale. Contact us for further details.

This 5-axis Mazak VARIAXIS C 600 was manufactured in 2022. It features a table size of 730 x 450 mm and impressive travels of 650 mm in the X-axis, 550 mm in the Y-axis, and 530 mm in the Z-axis. The machine is equipped with a spindle speed of 18,000 rpm and a tool magazine that holds 60 tools. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS C 600 vertical machining centre we have for sale. Contact us for further details.

This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2013. It features impressive travels of approximately 560 mm in both X and Y axes, and 630 mm in the Z axis. The machine has a maximum speed of around 14,000 rpm and weighs approximately 10,000 kg with the rotary table. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining centre we have for sale. Contact us for further details.

This 3-axis DECKEL MAHO DMC 63V vertical machining centre was manufactured in 1997. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a tool magazine capacity of 24 tools and a maximum spindle speed of 8000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 63V machine we have for sale. Contact us for further details.

This 3-axis DECKEL MAHO DMF 220 Linear was manufactured in 2004. It features impressive travels of approximately 220 cm in the X-axis, 56 cm in the Y-axis, and 72 cm in the Z-axis. The machine has a maximum speed of around 18,000 rpm and includes a chip conveyor and coolant filter unit. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMF 220 Linear vertical machining centre we have for sale. Contact us for further details.

This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2012. It features impressive travels of approximately 560 mm in both X and Y axes, and 630 mm in the Z axis. The machine has a maximum speed of around 14,000 rpm and includes a rotary table, CONSEP chip conveyor, and KNOLL coolant filter unit. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining centre we have for sale. Contact us for further details.

This 3-axis DECKEL MAHO DMC 100 V was manufactured in 2001. It features impressive travels of approximately 1000 mm in the X-axis, 800 mm in the Y-axis, and 500 mm in the Z-axis. The machine boasts a maximum spindle speed of around 18,000 rpm and includes a KNOLL chip conveyor and coolant filter system. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 100 V vertical machining centre we have for sale. Contact us for further details.

This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2011. It features impressive travels of approximately 560 mm in both X and Y axes, and 630 mm in the Z axis. The machine has a maximum spindle speed of 14,000 rpm and a robust table size of 400 x 400 mm, with a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining centre we have for sale. Contact us for further details.

This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of approximately 7200 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine is equipped with a powerful 5.5 kW electrospindle and a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the MECAL MC 305 machine we have for sale. Contact us for further details.

This 3-axis MIKRON VF 3 vertical machining center was manufactured in 1998. It features a table size of 460 × 1,220 mm, with X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 653 mm. If you are looking to get high-quality milling capabilities, consider the MIKRON VF 3 machine we have for sale. Contact us for more information.

This 5-axis Matsuura MAM 72-63 V was manufactured in 2008. It features impressive travels with an X-axis of 760 mm, Y-axis of 845 mm, and Z-axis of 610 mm. The machine includes a maximum workpiece capacity of Ø800 mm × 450 mm height and a tool magazine with 150 positions. If you are looking to get high-quality machining capabilities, consider the Matsuura MAM 72-63 V vertical machining centre we have for sale. Contact us for further details.

This 5-axis Matec 30 HV vertical machining centre was manufactured in 2012. It features a generous X-axis travel of 3000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm (horizontal). The machine is equipped with a powerful motor spindle, capable of speeds up to 9000 rpm, and a maximum table load of approximately 2500 kg. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV machine we have for sale. Contact us for further details.

This 5-axis DMG DECKEL MAHO DMU 80P duoBLOCK was manufactured in 2009. It features impressive axis travels with X-axis at 800 mm, Y-axis at 1050 mm, and Z-axis at 850 mm. The machine includes a robust table size of Ø 900 × 700 mm and a maximum workpiece weight capacity of 1800 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 80P duoBLOCK vertical machining centre we have for sale. Contact us for further details.

This 3-axis Makino SNC 64-A15 was manufactured in 2001. It features a main spindle speed ranging from 300 to 30,000 rpm and a spindle motor power of 15 kW. The machine is equipped with a tool magazine holding 15 positions and offers a feed rate of up to 16,000 mm/min. If you are looking to get high-quality graphite and metal machining capabilities, consider the Makino SNC 64-A15 vertical machining centre we have for sale. Contact us for further details.

This 3-axis MAKA DC 3 was manufactured in 2016. It features a spindle speed range of 18,000 rpm and impressive axis travels of 1645 mm in the X-axis, 1760 mm in the Y-axis, and 600 mm in the Z-axis. The machine includes a table size of 1200 x 1400 mm and a tool magazine capacity of 24 tools. If you are looking to get high-quality machining capabilities, consider the MAKA DC 3 vertical machining centre we have for sale. Contact us for further details.

This 3-axis DECKEL MAHO DMC 635 V was manufactured in 2006. It features an X-axis travel of approximately 635 mm and operates on a supply voltage of 400 V, 3-phase. With a rated power of 35 kVA, this vertical machining centre is designed for efficient performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 635 V machine we have for sale. Contact us for further details.

This 3-axis DAH LIH MCV2600 was manufactured in 2006. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 870 mm, and Z-axis travel of 760 mm. The machine includes a robust table size of 2800 x 970 mm and a maximum speed of 6000 rpm. If you are looking to get high-quality machining capabilities, consider the DAH LIH MCV2600 vertical machining centre we have for sale. Contact us for further details.

This 4-axis Matec 30 HV CNC was manufactured in 1997. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 600 mm, and Z-axis travel of 800 mm. The machine is equipped with a powerful 10 kW drive and a tool changer with 36 magazine positions. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV CNC vertical machining centre we have for sale. Contact us for further details.

This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details.

This 4-axis BW MCX750 M2 was manufactured in 2011. It features a substantial X-axis travel of 1100 mm, Y-axis travel of 900 mm, and Z-axis travel of 1250 mm. The machine has a maximum pallet load of 1500 kg and a magazine capacity of 240 positions. The machine is linked to a BW MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) .gindumac.de/produkt/bw-mcx750-m2_DE-MIL-BWX-2011-00001 Contact us for further details.