loos international used for sale

Steam boiler UL-S 2000 Loos International Steam boiler can be used: Industrial and service establishments in the food, beverages, textile, building materials, chemicals, ceramics, and paper sectors, ... with heat and steam demand, for processing, production, and heating. Type: UL-S 2000 Boiler serial number: 103234 Safety valves: Capacity: 2000 kg/h Pressure: 10 bar Technical data: 400V, 5,5kW Boiler Equipment with safety function: • Safety valve – 1 • Safety pressure limiter – 1 • Water level limiter – 1 Piping parts: • Manostat tube – 1 Further equipment: • Steam extraction valve – 1 • Feed water shut-off valve – 1 • Feed water check valve – 1 • Water level probe for feed water control – 1 • Shut-off valve – 1 • Blow-down valve – 1 • Desalting control valve – 1 • Desalting shut-off valve – 1 • Conductivity measu ...

1 Gebr. Boiler --------------------------- Manufacturer : LOOS International Type : U-HD 500 Heating surface approx. : 9 m² Capacity : 500 kg/h Ab. Operating overpressure max. : 13,00 bar Increased test pressure : 24.05 bar Water capacity full approx. : 770 l Year of construction : 2007 CE mark : 0036 equipped with Weishaupt combination burner oil&gas Type RGL3/1-E, ZMD, 15-500 mbar, gas control system, Control cabinet with Siemens C7, feed water pump and the existing coarse and fine fittings

with gas burners Weishaupt new glass wool new stainless steel sheets New storage engine Power Max 465 kW the boiler is uberholte with gas burner Weishaupt with new glass wool new grid grate Engine re-stored Power Max 465 kW the boiler is overhauled

Used low-pressure flame pipe boiler from LOOS from Gunzenhausen in good condition. The plant was in operation until the demo days and was shut down due to general plant changeover. Manufacturer LOOS Gunzenhausen Type: UN-D 2600 53.0 m2 x 1 bar Built in 1999 Ab. Steam generation 3200 kg / h Ab. Pressure 1 bar Water content 2560 l Brenner Weisshaupt Type L7T Heating oil burner Power 320 - 1957 kW Used last TÜV exam 2018 Dimensions: 4000 x 1900 x 2400 mm Also visit our website. We have a wide range of products in stock for the industry. A visit is worthwhile. The information about our company and the link to our website can be found in the dealer list under Brand GmbH.

Steam capacity at 102 ºc of nutritious water --- 10000 kg / h Heat efficiency --- 6.5mW Permissible excess pressure --- 13 Bar Working pressure --- 12 Bar Water content --- 19 m³ Total water content --- 22.6 m³ Transport weight ---- 21,3 t Working weight --- 40.6 t Fuel --- Gas and diesel Manufacturer of water --- Weishaupt Type of water --- Weishaupt G 70 / 2A Water adjustment --- Modulated The heat is the voltage of the current volume --with full fire chamber --- 1.02 mW - without full fire chamber --- 1.21 mW Boiler efficiency - at 100% productivity --- 90% - at 50% productivity --- 90.5% Boilers are still running and video is available on request

diameter: 2000 mm width: 5000 mm filling amount: 8000 l degree: max. 110 grad temperature: 110 °C 0: 0,5 bar dimensions of the machine ca.: 2000x5000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Steam generation plant consisting of Double flame tube boiler with economiser, 2 x SAACKE burner Teminox for natural gas H, calorific value HS 11.4 kJ/Nm³, 14MW (2 x 7 MW), 17 to. Saturated steam at 20 bar ü (25 bar hp). Boiler: Manufacturer LOOS Deutschland GmbH Type ZFR 2300 Type of large-capacity water boiler with two flame tubes (three-speed) and a flue gas water preheater (Economizer) Permissible operating pressure (PS): 24-25 bar Permissible operating temperature: 224°C Permissible steam output: 23 to. Saturated steam Burner: 2 x SAACKE Type Teminox GS 75-22 Fuel: Natural gas There is a soundproofing hood for each burner Fireplace: 37 meters above ground Outlet area: 0.507 m² Stainless steel double fireplace Water treatment plant Manufacturer CHRIST consisting of softening system and downstream reverse osmosis system Complete installation from y ...

mobile heating system, central heating system, steam heating used STEAG / LOOS Boiler capacity: steam 3.2 t/h Boiler manufacturer: LOOS Boiler type: UHD 3200 Temp. max 190°C Pressure max 13 bar Boiler capacity 2650 l Burner WALKER D112/140-2 7.0 kW Heat and soundproofed container 9.2 x 3.6 x 3.6 m Transport weight: approx. 25t Operating weight approx. 30 t Electrical power requirement 25 kW Changes and errors in the technical data, information and prices as well as prior sale reserved.

Dampfkessel Baujahr: 1986 Neuer Kessel Baujahr 1991 Hersteller: Loos Typ UL SH 14000 Kesselleitung: 8.5 to Dampf/h 6`000kW Betriebsdruck: 16 bar Dichtekontrolle 70 mbar Gas min. 85 mbar Gas max. 170 mbar Neue Steuerung Baujahr 2002 Neue Steuerung Simatic WinCC V5.1 Steuerung HME = Steuerung Alfa / Speisewasser von Enthärtungsanlage Christ (Niveau 11.01 < min Alfa aktiviert Pumpe 11.7 und Ventil 11.71) Steam boiler Year of construction: 1986 New boiler Year of construction: 1991 Manufacturer: Loos Type UL SH 14000 Boiler capacity: 8.5 to steam/h 6`000kW Operating pressure: 16 bar Density control 70 mbar Gas min. 85 mbar Gas max. 170 mbar New control system year of construction 2002 New control Simatic WinCC V5.1 Control HME = control Alfa / feed water from Christ softener (level 11.01 < min Alfa activated) Pump 11.7 and valve 11.71) Die fast neue Wasseraufbereitungs ...

1 Gebr. High-speed steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 400 Capacity : 350 kg/h Nominal heat output : 233 kW Operating pressure max. : 31 bar Previously operated with : 11,8 / 13 bar Water content approx. : 39 l Year of manufacture : 2008 CE mark : 0036 equipped with Weishaupt gas burner type WG 30N / 1-C, ZM-LN version, gas control system, 15-500 mbar, Feed water pump, control cabinet, mounted on the boiler body and the existing coarse and fine fittings. Steam dryer LOOS Type SDM, capacity 6 l, operating pressure 31 bar, test pressure 56 bar, max. temp. 200 °C, year of construction 2008 LOOS feedwater module mounted on frame, capacity 500 l, with control cabinet, Dosing vessel, sample water sampling cooler, booster pump Dimensions: 1700 mm x 1000 mm x 1950 mm

Fully automated sand-lime brick factory. 50,000 tonnes/year. Modernised in 1986, 2000 & 2019. The current plant meets today's high safety standards and has been continuously modernised and modified. The residual steam is reused for heating company buildings. Packaging installation: fully automatic The entire installation is fully automated, with the exception of the manual opening and closing of the autoclave doors. 2x Atlas Krupp Polysius presses (1 with new Bosch Rexroth hydraulic system and controls) Forming boxes for different stone formats Conveyors and silos Primary crusher Gyradisc 36 Jg. 1980 Fine crusher SBM V8 machine nr.12041/2X Vibrating screen GFA sieve 0-3mm Mixer machine factory Gustav Eirich, type DE 22 Machine no. 23104, built in 1984, with vortex device capacity 1500 lt/ 2400 kg Eirich mixer, with agitator 1.5 m or 2.5 t 2 x reactors Namur mixer, with w ...

Used steam boiler made by Loos, capacity 1250 kg of steam per hour and pressure 10 bar. New 2000. Temperature 184 deg C.

Used steam boiler made by Loos, capacity 640 kg/h of steam per hour and pressure 10 bar. New 1993. Oil burner.

Used steam boiler made by Loos, capacity 3200 kg of steam per hour and pressure 10 bar. New 1999. Temperature 185 deg C

The boiler is unused and would have to be dismantled on its own, located on the 4th floor can be operated with oil or gas.

Steam boiler Loos with Weißhaupt gas burner Type: U-ND 500 capacity: 500 kg steam/h Max. operating overpressure: 1 bar Test overpressure: 2 bar Water capacity full approx.: 770 l year of construction: 2003/2004 CE-marking: 0036 incl. hot water tank with condensate pump

1 Gebr. High-speed steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 500 Capacity : 500 kg/h Thermal power : 334 kW Operating pressure max. : 18 bar Water content approx. : 43 l Year of manufacture : 1996 equipped with Weishaupt gas burner, gas control system, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

1 Gebr. High-speed steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 600 Capacity : 600 kg/h Thermal power : 400 kW Operating pressure max. : 13 bar Water content approx. : 43 l Year of manufacture : 2001 Year of manufacture heating coil : 2010 equipped with Weishaupt oil burner WL40 Z-A, Power 145-570 kW, oil flow rate 12-48 kg/h, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

2 Gebr. High-speed steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 1000 Capacity : 1,000 kg/h Ab. Operating pressure : 31 bar Test pressure : 56 bar Water content approx. : 110 l Heating surface : 21,9 m² Year of manufacture : 2007 CE mark : 0036 equipped with Weishaupt combi burner gas & oil, Type WM-GL 10/3-A, Ausf. ZM-T, 110-1,000 kW, Oil flow rate 20-84 kg/h, gas control system, feed water pump, Control cabinet, mounted on the boiler body and the existing coarse and fine fittings.

1 Gebr. High-speed steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 1000 Capacity : 1,000 kg/h Ab. Operating pressure : 13 bar Water content approx. : 110 l Heating surface : 21,9 m² Year of manufacture : 1992 equipped with Weishaupt gas burner, Gas control system, feed water pump, Control cabinet, mounted on the boiler body and the existing coarse and fine fittings.

1 Gebr. High-speed steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 300 Capacity : 300 kg/h Heat output : 200 kW Operating overpressure : 31 bar Previously operated with : 13 bar Test pressure : 56 bar Water content approx. : 39 l Year of construction : 2008 CE mark : 0036 equipped with Weishaupt gas burner WG30N / 1-C, ZM-LN, 40-350 kW, control cabinet, mounted on boiler body and the existing coarse and fine fittings.

1 Gebr. Low Pressure Steam Boiler -------------------------------------------- - mounted on frame - Manufacturer : LOOS, Gunzenhausen Type : U-ND 500 Power approx. : 500 kg/h Operating overpressure : 0.5 bar Test overpressure : 2 bar Water capacity full approx. : 770 l Year of construction : 2005 equipped with Weishaupt combi burner gas&oil, GL3/1-E, ZMD, 90-630 kW, 15-500 mbar, oil flow rate 16-53 kg/h, gas control system, Control cabinet with C7 control, feedwater pump and the existing coarse and fine fittings.

1 Gebr. Low Pressure Steam Boiler --------------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : U-ND Capacity : 800 kg/h Ab. Operating overpressure : 1 bar Increased test pressure : 2 bar Total. : 1.108 l Year of construction : 2004 CE mark : 0036 equipped with Weishaupt gas burner G5/1-D, ZMD-LN, 200-900 kW, 120°C, gas control system, Control cabinet with touch panel and the existing coarse and fine fittings. 1 Gebr. Feedwater module ------------------------------------ Manufacturer : Loos, Gunzenhausen Type : WSM Content approx. : 800 l with control cabinet, sample water sampling cooler, 2 dosing vessels

1 Gebr. Boiler ----------------------------- - mounted on frame - Manufacturer : LOOS, Gunzenhausen Type : U-HD Heating surface approx. : 14 m² Capacity : 800 kg/h Ab. Operating pressure : 10.0 bar Increased test pressure : 18.5 bar Water capacity at NW approx. : 748 l Water capacity full approx. : 1.108 l Year of construction : 2001 equipped with Weishaupt gas burner WMG10/3A, ZM, 100-1.000 kW, 15-500 mbar, Nox cl 2, year 2015, Gas control system, control cabinet, feed water pump and the existing coarse and fine fittings.

1 Gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD Heating surface approx. : 20 m² Power max. : 1,000 kg/h Operating overpressure : 13 bar Increased test overpressure : 23.4 bar Water content at NW approx. : 993 l Water capacity full approx. : 1.365 l Year of construction : 1994 1 tube blind law equipped with Weishaupt oil burner, control cabinet, feed water pump, and the existing coarse and fine fittings

1 Gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD Heating surface approx. : 20 m² Power max. : 1,000 kg/h Operating overpressure : 10 bar Increased test overpressure : 18.5 bar Water content at NW approx. : 993 l Water capacity full approx. : 1.365 l Year of construction : 1991 equipped with Weishaupt oil burner, control cabinet, feed water pump, and the existing coarse and fine fittings

1 Gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD Heating surface approx. : 20 m² Power max. : 1,000 kg/h Operating overpressure : 10 bar Increased test overpressure : 18.5 bar Water content at NW approx. : 993 l Water capacity full approx. : 1.365 l Year of construction : 1991 equipped with Weishaupt oil burner, control cabinet, feed water pump, and the existing coarse and fine fittings

1 Gebr. Boiler ------------------------------------ - mounted on frame - Manufacturer : LOOS, Gunzenhausen Type : UL - S Heating surface approx. : 80 m² Capacity : 4,000 kg/h Bish. Ab. Operating overpressure : 16 bar Increased test overpressure : 30.4 bar Water content at NW approx. : 5.930 l Water capacity full approx. : 8.020 l Year of construction : 2003 CE mark : CE 0036 equipped with Weishaupt gas burner G50 / 1 - B, Version ZM-NR 550 – 4,000 kW, NoxCl. 3 Built in 2009, separate control cabinet, feedwater pump, integrated economizer, type Eco1, 110 kW, 29 ltr., 31 bar, 238°C, Built in 2018 and the existing coarse and fine fittings.

1 Gebr. Boiler ------------------------------------ - mounted on frame - Manufacturer : LOOS, Gunzenhausen Type : UL - S Heating surface approx. : 80 m² Capacity : 4,000 kg/h Bish. Ab. Operating overpressure : 10 bar Increased test overpressure : 18 bar Water content at NW approx. : 5.930 l Water capacity full approx. : 8.020 l Year of construction : 1994 equipped with Weishaupt combi burner gas&oil type RGL 10 / 1 - D, ZMD version, separate control cabinet, feedwater pump and the existing coarse and fine fittings.

V195 1 electric steamboiler Loos/Germany EUR 1.500,- loaded year 1990, 6 bar, 164°C, capacity 115 kg/h, 81 kW, 380V/50 Hz, volume 85 ltr. EUR 1.500,- loaded ex works V196 1 electric steamboiler Roucka-Slatina/Czech. EUR 1.500,- loaded year 1993, 9,5 bar, 177°C, capacity 120 kg/h, 90 kW, 380V/50 Hz EUR 1.500,- loaded ex works

FEEDSTOCK TUBE   external diameter min.: 10 mm   external diameter max.: 105 mm   wall thickness min.: 0.8 mm   length min.: 20 mm PRESS FORCES   total force (nominal): 200 to

PDC International 75M-Shrinksealer Tamper Evident Neck Bander/Sleever Sealer Machine. S/N-134. Year 1991. [Electrical: 1ph/120v/60hz/15amps]. [More Info: One (1) Used 1991 PDC International 75m Shrink sealer rated from 50 to 400 per minute depending upon band/sleeve dimensions. Band diameter range is from 10 to 90mm. Band height/length range is from 15 to 225mm. Includes vertical perforation, static eliminator, timing screw drive, motorized unwind reel, safety interlocks, bottle and sleeve material sensors and verification, Totally enclosed upper and lower safety cabinets. All stainless steel and anodized aluminum construction. Tool-less Changeover. Stack light tower for warning and alarm. currently set up with 60mm tooling. Sensors include: Upstream Photo Eyes, Material Out Sensor, Low Material Sensor w/Beacon and Film Feed Jam Sensor.

1 AUTEFA loose stock/flock stampfing press type 6.62 for stamping lose flock into materila carriers for dyeing / bleaching machines, with 2 stampfing arms with motorized rotational carrier support . complete with electrical panel

1 Loos steam boiler Type AW1-1 No. 53658/1 Capacity 10 to steam with 20 bar Up to 235 °C, 385 kW Year of construction 1991 With Weißhaupt burner machine with EL heating oil and gas firing Type RGL 70/1 A, Catergorie J Fabr. No. 3626804 Year of construction 1991 1 Loos steam boiler Type AW1-1 No. 53658/1 Power 10 to steam with 20 bar Up to 235°C, 385 kW Year of construction 1991 With white head burner machine with EL heating oil and gas firing Type RGL 70/1 A, category J No. 3626804 Year of construction 1991

Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported ove ...

Weight: 0,3 tons Length mm: 2900 Width mm: 1000 Height mm: 3350 Transport size L x W x H: 2,9 x 1,0 x 2,35 Min.-max glass size: 2900 x 2400 Condition machine : Good Missing parts: None - For more information, please mail us: salestecfort.nl

used nail box for pallet making machine; Tilting function for loose nails for separation into the nailing machine (feed) to the nail guns; pallet production; Functional, functional. Dimensions: 580x810mm Total width: 760mm Total height: 710 mm Shipping by freight forwarder possible

Container mounted on single-axle chassis, e.g. for loose bulk materials, Capacity approx. 2m3, payload approx. 2,000 kg, outlet height approx. 1,000 mm, Filling dome lid

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

Technical data: 1-drive unit / 1-loose unit 2012 overtaken max. load: 10 to Container diameter: 1000-5000 mm Roll diameter: 540 mm Roll width: 600 mm

Which cups can be closed? plastic or cardboard cups (up to approx. 95 mm) are sealed with an aluminium board, plastic board or paper board. What is the working swell of the hand sealer? Pre-filled cups are inserted by hand into the cell board and covered with a board. By moving the board, the cup to be sealed comes under the seal head. When the seal is triggered, the loose board is now hot-sealed on the cup. In the meantime, the next cup can be placed in the other cell and provided with a board. Setting the seal: The desired seal temperature can be set via a text display. In addition, the duration of the sealing process can be determined individually. This makes it possible to seal different cup or board materials with different parameters. Format change: A format change of e.g. 75mm on e.g. 95mm can be done easily and quickly. Power: approx. 400 sealing processes/hr Pow ...

1-impulse unity 125to ./1 Loose unity 125to.

Cardridge filter single, 1 x with TI Max. Operating pressure: 10 bar Max. Operating temperature:-25 / + 150 ° C Content: 9.3 L Price/piece Negotiable

Fully automatic conveyor belt made of stainless steel including water supply and height adjustment function Manufacturer: Solia Material: 1.4301 (V2A) Dimensions: Length: 3.80 m Width: 1.20 m Frame height: 80 cm Height with funnel: 1.20 m The conveyor belt was originally mounted on a potato peeling machine. It has several tracks to sort the potatoes. However, it is suitable for almost all types of bulk materials. Furthermore it has a funnel through which enters the bulk material on the band. However you can easily disassemble the frame where the funnel and the tracks are welded on.You can easily loose the frame with the help of the star head screw. The conveyor belt was hardly used and is very high quality! Therefore in a very good condition!

Etikettierer (semiautomaton) to application of round etiquettes 230 V of connection / air pressure inevitably an easy service / quick arrangement this Etikettierer is suitable especially for smaller production loose dimensions. further information on inquiry

FOR SALE SULZER ASV 25/30 ENGINE NEW GENUINE SPARE PARTS AT TURKEY HAVE A GOOD DAY SIR. WE HAVE MANY NEW GENUINE SPARE PARTS OF SULZER ASV 25/30 ENGINE AT OUR STOCK. WE VE 200 ITEMS AT OUR STOCK. PLS FIND 100 ITEMS WITH PARTS NUMBER ON BELOW. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US.. NO. ONE - SULZER 12 ASV 25/30 PART NO. 1 NEW CYLINDER LINER 5001001 1 PCS 2 NEW PISTON 3404001 4 PCS 3 NEW CAM SHAFT SECTION 10107001 3 PCS 4 NEW COMPLETE LUBRICATION PUMP 30004 K 1 PCS 5 RECON CONNECTING ROD 1 PC 6 NEW LOWER CRANK BEARING D = 225 MM 02103 B 7 PAIRS 7 NEW UPER CRANK BEARING D = 225 M 02103A 7 PAIRS 8 NEW BEARING SHELL HELPED D = 195MM 03004A 12 PAIRS 9 NEW THRUST BEARING HELPED 2103001 2 PAIRS 10 NEW BOLT WITH OVERSIZE 701007/0VERSIZE 12 PCS 11 NEW BEARING SHELL HELPED D = 195MM 03004A 12 PAIRS 12 NEW BEARING SHELL HELPED D = 194.5MM 03004B 511200- ...

The following completely reconditioned and ready compact system of SEPARATORS & SERVICE T.D. is for sale. This selfcleaning separator WSPX 303TGP-71 is clean mainly used water-based coolant, for the concentration of washing liquids like lye also waste water or rain water cleaning. The maximum hydraulic throughput capacity is 1500 l / h. The engine is a two-pole motor with 50 Hz 2.2 kW. The drum has a speed of 9516 RPM 69 DB (A). Control water consumption is 0.5 l / emissions per output. Sediment volume ca: 0.63 liters. Output of min 0.8 liters, max 0.9 litres. The separation is carried out in the separator drum which is driven by the electric motor via a flat belt. The separator can be used as a concentrator with a large heavy phase (E.g. water) and a small stage (E.g., oil), as well as the light phase. The separator can be used as well as cleaning separator (Klarifikator) with o ...

QUASAR 50 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le|L0, strain LC|LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-configured "chec ...

Etikettierer (semiautomaton) to application of etiquettes on all angular bundles and especially for the Nachlabeln of tubes suitably 230 V of connection / air pressure inevitably an easy service / quick arrangement this Etikettierer is suitable especially for smaller production loose dimensions. further information on inquiry

The quasar 100 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le ·) L0, strain LC | LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-confi ...