loader used for sale

Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping slee ...

Loader,stainless steel,GEA/Scanio type K16,for lift and unloading of max 1.000 kg. vats.

Loader,stainless steel,GEA/CFS type 1200D,for lift and unloading of max 1200 kg vats.

Mobile loader,stainless steel,Meattec,For lift/tipping of Vemag bins.

Mobile loader,stainless steel,SFK-Danfotech CH 300,for lift/dump of Vemag bins.

Loader,stainless steel,Beritech type berilift for lifting/emptying of Vemag wagons.

Backhoe loader, multifunction device with engine damage otherwise good substance, new tyres at the rear

loading magazine for Tornos SAS16, like new -unique offer- This loading magazine CUCCHI GIOVANNI Mod. DBM 17/36 is built for use on a Tornos SAS16, but only used ½ year. The year of manufacture of the loader will be 2022/23. Secure this unique offer at top conditions! bar length 3,30 m incl. remote maintenance; control voltage 24V Standard paint RAL7035 Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: loading magazine for Schütte AG20 Manufacturer: Pietro Cucchi Type: surface loader year of construction: 2000 for bar length 3000mm Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

JCB - Wheel Loader with Hydraulic - Quick Coupler Bucket with undercarriage knife 0.8 m³ + pallet fork, All-wheel drive, wide tyres Trelleborg 400 Agro Year of construction 2018, operating hours: approx. 380 Power: 37 kW (50 HP)

refurbished bucket for wheel loader CAT980G, Width 3,600 mm, capacity 5.1 m³, Cut new,

Loader caterpillar manufacturer Liebherr, type LR634, year of construction 2007 Drive 80%, with pressurized cabin, operating hours: 6700 Ready for action...

Wheel loader LIUGONG 856 H, year of construction 2021, Operating hours: 170 with hydraulic quick coupler and 3.2 cbm shovel -Price on request-

Wheel Loader Komatsu 103 KW Engine type S6D102E Tire 20,5-25 4 x Good Central lubrication system Hydraulic quick coupler Shovel knife as good as new Width 2.54 m Capacity 2,1 m³ Length 7.06 m Width 2.45 m Height 3.25 m

DEMO MACHINE We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: Polar Transomat Loader TRE RSL 160-7S - Application area: min. 450x500mm; max. 1.640x1.220mm - Layer height: max. 165mm - Lifting height: min. 170mm; max. 1,650mm - Load capacity: max. 300kg - Voltage: 400V/50Hz/3~ On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote

The wheel loader has a low mileage for its age and is started regularly to avoid standing problems. Included in the price is a fork, the folding recess would also be available as an option.

Vorstapeleinrichtung - Pre Loader ALBO System AB S-517 Serial-No. S-517 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

SECOND-HAND THROUGHFEED LOADER FRIULMAC MOD. FN3 - min/max working length 250/1300 mm - max working width 160 mm - min/max working thickness 10/80 mm - production capacity : 0-50 psc / min - diam. Blades 400 mm - sn 1656

SECOND-HAND THROUGHFEED LOADER FRIULMAC MOD. FN3 - CE RULES - 3 rollers - min/max working length 250/1300 mm - max working width 160 mm - min/max working thickness 10/80 mm - production capacity : 0-50 psc / min - diam. Blades 400 mm - year 1996

Description: Working area: X-axis (cross slide): 250 mm Z-axis (longitudinal slide): 350 mm Rotation diameter over cross slide: 204 mm Three-jaw chuck Outer diameter: 140 mm Turning diameter: 120 mm Working spindle: Spindle head: DIN55021 A5 Bar passage with hydraulic clamping: diameter 42 mm Feed drives: Feed force X-axis: 2600 N Z-axis: 3200 N Rapid traverse speed: 10 m/min Main drive, direct current Power: from 2350 rpm: 12.5 kW Speed range: 100 - 6000 rpm Tool carrier: Disk turret: 12 stations Turret: Manufacturer: SAUTER Type: 0.5.901.016 Turret can accommodate driven tools With bar loader Max. Bar length: approx. 1000 mm With spare parts machine Manufacturer: EBOSA Type: 143 (see pictures) With technical documentation as shown in the pictures Important note: Bar feeder is delivered without bar material. The bar material shown in the pictures is not included in the scope of delivery ...

Used, functional crawler loader. Fiat Allis FL 5 In need of repair. Seat, 2 windows broken.

wheel loader, manufacturer: KRAMER, type: 5065, year of manufacture: 2022, fuel: diesel, KW: 34.3, total weight (kg): 4,500, read operating hours (h): 210, vehicle identification no.: 349040715, 1 grab bucket KRAMER 10000275259, serial number: IXS10_26_22_003, width: approx. 165 cm, weight: 464 kg, 1 pallet fork WACKER NEUSON, Damage: all around Traces of use

wheel loader, manufacturer: KRAMER, type: 5065, year of manufacture: 2020, fuel: diesel, total weight (kg): 4,500, reading operating hours (h): 862, vehicle identification no.: 349011833, 1 grab bucket KRAMER 10000275259, serial number: 071433 0320 0804, year of manufacture: 2020, width: approx. 165 cm, weight: 440 kg, 1 pallet fork WACKER NEUSON , Damage: all around Signs of use

From a current recycling we offer you Puma yard loader HL ECO 34 c. Year of construction 2022 Hours: 64.1 Condition:- Original price: - Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 89281 Altenstadt The sale is without warranty Subject to prior sale

Description: Electric wheel loader, double engine, 4x4 traction, equipped with bucket, forks and battery charger. Approx. Onsite Dimension. (l x w x h): 2,700 x 900 x 1,600 mm, weight approx.: 1,000 kg

Description: Electric wheel loader, double engine, 4x4 traction, equipped with bucket, forks and battery charger. Approx. Onsite Dimension. (l x w x h): 2,700 x 900 x 1,600 mm, weight approx.: 1,000 kg

We offer you a Giant G2200 HD wheel loader from a current recycling. Year of construction 2022 Condition: Original price: Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 31633 Leese The sale is without warranty Subject to prior sale

diameter:15,20,25,30,35,40,45,50 mm Bar pusher diameter:16, 20,25,30,35,40,45,50 mm Channel diameter:17,22,27,32,37,42,47,52 mm bar length:3000 mm Center of spindle height above floor:1110 - 1230 mm dimensions of the machine ca.:5x012x1,8 m weight of the machine ca.:2,5 t Bar feeder magazine which can change channels automatically for 8 different diameters: 50 / 45 / 40 / 35 / 30 / 25 / 20 / 15 mm Turret system. Smallest diameter is 10 mm Bar loader was installedat a Biglia B 445 3T 3Y

Automatic bar loading magazine for single spindle automatic lathe / short lathe, new TEST the new DB-EVO bar loader 4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request) very high speeds even with profile material Manufacturer: Giovanni Cucchi Machine type: Automatic bar loading magazine for single-spindle / short turning Type: DB-EVO Design: Surface loading magazine or bundle loading magazine diameter range: 20-110mm DB-EVO at a glance: Scope of delivery and optionally orderable functions: - oriented loading of the bar material possible (e.g. edge upwards) - optional feeding of saw cuts and short parts possible - optional - Monitoring and fault diagnosis (touch screen) - Surface magazine - Bundles and other variants possible - automatic loading of short bars - Trays for tools - low power consumption (start/stop function) - Available in versions for 1.5, 1.8, 2.5, 3.3, 4.2 and 6. ...

Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: DBM/DBMF Design: Surface loading magazine or bundle loading magazine diameter range: 6-67mm DB-EVO at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the machine. Bar loaders DBM/DBMF are mounted on rails, so that they can be easily separated from the machine at any time by unlocking them on the machine for changing feed grippers and cleaning work. These magazines do not require bar tubes on the machine and are bolted directly to the machine (see pictures). It is possible to work in automatic mode as well as in manual mode. In the event of any malfunctions, the magazine can be used as a conventional bar guide tube. This eliminates machine downtime if service technicians are requ ...

There are one loader and one unloader Krones ROBOT 3 available, z-travel machine 1/ 2: 2700/ 2100mm, max. payload: 400kg, format: 20/ 24 beer crates, control: Siemens S7-300, with linear lifting axis, swivel unit, hook head, central lubrication, servo control B&R CP260, servo controller Siemens Simodrive 611, safety controller Pilz PNOZ M0P, visualization Krones CTS 10 loading table/grouping station, pack infeed conveyor, safety light barriers for the pallet outfeed, door/acknowledgement switch for safety doors, air conditioning unit for the control cabinet (retrofitted in 2017), circuit diagrams, operating instructions, maintenance instructions in printed and digital form.

Description: KOMATSU WA500-1 ,Loader no.  , ,11204 10.809 hours according to counter Approx. Onsite Dimension. (l x w x h): 8,810 x 3,300 x 3,630 mm, weight approx.: 27,500 kg

Description: KOMATSU WA470-5H Loader no.  , ,5329397 68.355 Km according to counter Approx. Onsite Dimension. (l x w x h): 8,882 x 2,903 x 3,460 mm, weight approx.: 23,200 kg

EMCO - Loading arm 4 inches - used - as spare part carrier

Technical data: Loads Load: 70 kg Additional load: 20 kg Workspace: Max range: 1720 mm More info and versions: Number of axes: 4 Repeat accuracy: +/-0.1 mm Weight: 1050 kg to 1200 kg

Specifications load Bearing load: 80 kg Further data and types Number of axes: 3 Repeatability: +/-0.1 mm Weight: 1200 kg

Rotary vane vacuum pump /// oel circulation lubricated Manufacturer: Busch Type: RC 0100B End pressure: approx. 20mbar suction power: approx. 100m3/h Status:Generalueberholt If you have any questions about this information or general questions about vacuum generation, we are happy to provide you with your services;

Pallet fork (fork length 1000 mm) with carriage / ballast weight three-point hitch

blower power: 19 kW motor: . bucket: Diesel . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

for material Ã?: 6-80 mm for rod lengths: 100-915 mm Recording size: 945 x 800 mm Working height: 1400 mm height adjustment: +/-200 mm Electr. Connection: 220 V Space requirements: 3420 x 1150 x 1500 mm Weight: 300 kg

was connected to Gildemeister GMC 20

new all stainless steel discharging height ± 1.770 – 2.250 mm mobile

YEAR: 1989 CNC: FANUC 0T TORNIBILE: 300 mm TURNBACK LENGTH: 300 mm MANDRINO: MANDRINO ATTACK: 6 ASA BARRA CAPACITY: 56 mm ROTATION SPEED: 3240 rpm POWER: 26 Kw AXIS C: 360 degrees I TORRETTA: PORTASSTATION STATIONS: 12 Nr. MOTORS: 6 Nr. MANDRINO: MANDRINO ATTACK: 6 ASA ROTATION SPEED: 3240 rpm. POWER: 26 Kw AXIS C: 360 degrees The TORRET: PORTASSTATION STATIONS: 12 Nr. RELATED: 6 nr

NEW ! all stainless steel suitable for eurobins of 200L discharging height : ± 700-900 mm 1,5 kW mobile ± 300 kg dimensions (l x w x h) : ± 1.800 x 1.100 x 1.300 mm

Capacity: 4.000 crates / h (at palletizer / depalletizer) Presently equipped for: Bottles: 0,50l GdB Kropfhals 0,70l Zwiebelhalsflasche 0,75l Heilwasserflasche 1,00l GdB Leichtglasflasche 1,25l GdB Leichtglasflasche Crates: GdB crates with 12 bottles, short side leading GdB crates with 20 bottles, short side leading Pallet: EURO pallet 1200 x 800 mm consisting of: 1 Depalletizer make: Kettner type: Pressant Duplex 2NT 1136 year: 2000 1 Palletizer make: Kettner type: Pressant Duplex 2NT 1176 year: 2000 1 Pallet Pressure Control make: Kettner year: 2000 1 Empty Pallet Magazine make: Kettner type: ST year: 2000 1 Empty Pallet Magazine make: Kettner type: ST/EST EURO year: 2000 1 Pallet Destrapper make: Born type: PAE year: 1986 Crate Conveying System make: Krones type: Multico ...

Spindle circle 165 mm Interface Gildemeister GM 16 AC

Rod diameter 8 - 80 mm Rod length 1,000 - 2,100 mm Connection power 5 kVA Machine weight 950 kg