british flag
Resale Logo

lns quick load used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information dealer of used and reconditioned air compressors all makes  DUP Compressors Trading GmbH  http://www.dupcompressors.com 
banner logo
start page > keywords lns quick load > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
123801072 1502

CLARK C500Y100PD for sale


Diesel forklift Clark C500Y100 Built in 1990 Trip lex mast with full free lifting height 2200 mm Lifting height 4000mm Load capacity 5000kg Read operating hours approximately 2100 Perkins diesel No sal ...

 
Diesel forklift Clark C500Y100
Built in 1990

Trip lex mast with full free lifting height 2200 mm

Lifting height 4000mm

Load capacity 5000kg

Read operating hours approximately 2100

Perkins diesel

No sales to private

The sale is carried out only to entrepreneurs in the sense of § 14 BGB
 
Price  
    request
123798347 2449

HAULOTTE HA16X Diesel, 4x4 drive, 15.5m Working Height. for sale


; Gross weight [kg]: 6500; Rear tyres remaining: 60; Front tyres remaining: 60; Accessories: Manufacturer: Haulotte, Typ: HA16X, Building year: 2005, Fuel: Diesel, Serial number: AD111185, Working hours: 2.587 h, Loading ...
used machine
 
; Gross weight [kg]: 6500; Rear tyres remaining: 60; Front tyres remaining: 60; Accessories: Manufacturer: Haulotte, Typ: HA16X, Building year: 2005, Fuel: Diesel, Serial number: AD111185, Working hours: 2.587 h, Loading / lifting capacity: 230, Working height: 15.5 m, , CE (Declaration of Conformity), , Horizontal outreach: 8, 45 m, Up and ; Maximum lift capacity [kg]: 230
2005
11,900 €  
  NL   request
123785029 802

SHINOHARA 520 P for sale


- Twocolours size 36x52 cms. with perfecting 1 1 or 2/0 - Year 1995, Alcohol film dampening with refrigeration system, Fujitronics - Semi Automatic plate changing system - Only 15 mil. copies, Quick clamps, powder s ...
used machine
 
- Twocolours size 36x52 cms. with perfecting 1 1 or 2/0
- Year 1995, Alcohol film dampening with refrigeration system, Fujitronics
- Semi Automatic plate changing system
- Only 15 mil. copies, Quick clamps, powder spray
- Automatic plate registers, totally cleaned and checked
- Only one owner, excellent conditions
- All books, diagrams and tools, available immediately
1995
10,000 €  
  IT   request
123798384 2465

HAULOTTE HA16RTJ Unused, 4x4 Drive, 16m Working Height. for sale


; Gross weight [kg]: 6200; Rear tyres remaining: 100; Front tyres remaining: 100; Maximum lift capacity [kg]: 230
used machine
 
; Gross weight [kg]: 6200; Rear tyres remaining: 100; Front tyres remaining: 100; Maximum lift capacity [kg]: 230
2018
38,500 €  
  NL   request
123785009 101

HITACHI SEIKI for sale


YEAR 2010 FLOW TABLE KG.750 TABLE 4 CAVE AT FROM 18 MM. DISTANCE PLAN TABLE NOSE CHUCK 150/600 MM. CORSE X, Y, Z: 1000x510x450 RAPID X, Y 40 MT. / MIN. - Z 24 mt./min. QUICK WORK IN 15 MT. / MIN. CHUCK 12,000 RPM  ...
used machine
 
YEAR 2010
FLOW TABLE KG.750
TABLE 4 CAVE AT FROM 18 MM.
DISTANCE PLAN TABLE NOSE CHUCK 150/600 MM.
CORSE X, Y, Z: 1000x510x450
RAPID X, Y 40 MT. / MIN. - Z 24 mt./min.
QUICK WORK IN 15 MT. / MIN.
CHUCK 12,000 RPM
EXTERNAL REFRIGERATION
FLANGE FOR SUPPLY OF COMPLETE TOOL IN HIGH PRESSURE
CHIP CONVEYOR
C / 30 POSITIONS WITH TOOLS OF EXCHANGE BRACCETTO
ATTACK CHUCK BT40
SPINDLE 11 / 18.5 KW
CNC Seikos / FANUC 18i
MACHINE COMPLETELY REBUILT
LINE NEW CHUCK
NEW TOOL CHANGE
SCREWS X, Y, Z NEW
SHOES AXES X, Y, Z NEW
GRINDING SPINDLE CONE
2010
Price  
  IT   request
123797991 904

GENIE S125 Diesel, 4x4x4 Drive, Jib, 40.1m Working Heigh for sale


; Gross weight [kg]: 21006; Rear tyres remaining: 40; Front tyres remaining: 40; Accessories: Manufacturer: Genie, Typ: S125/4WD, Building year: 2008, Fuel: Diesel, Serial number: S12508-2211, Working hours: 1.403 h, Loa ...
used machine
 
; Gross weight [kg]: 21006; Rear tyres remaining: 40; Front tyres remaining: 40; Accessories: Manufacturer: Genie, Typ: S125/4WD, Building year: 2008, Fuel: Diesel, Serial number: S12508-2211, Working hours: 1.403 h, Loading / lifting capacity: 230 kg, Working height: 40.1 m, Horizontal reach: 24.4 m, Boom sections: 4, Drive speed: 4.8 km/H, Numbe; Maximum lift capacity [kg]: 230
2008
67,500 €  
  NL   request
123774109 101

UNION WMW BFT 90-3/1 for sale


Machine type Tischbohrwerk make UNION WMW type BFT 90-3/1 year 1987 control type conventionally country of origin Germany delivery immediately cargo base site free load technical details Spindle diameter 90 mm x way 100 ...

 
Machine type Tischbohrwerk make UNION WMW type BFT 90-3/1 year 1987 control type conventionally country of origin Germany delivery immediately cargo base site free load technical details
Spindle diameter 90 mm x way 1000 mm y-way 1000 mm Z-axis 1600 mm w-axis: 750 mm

Top 1000 x 1120 mm table can be rotated 360 ° table over floor 1000 mm spindle retainer for SK 40 maximum tool height 1400 mm spindle stroke 710 mm table burden 2.5 t total power consumption approx. 23 kW machine weight 10.3 tons of space approximately L: 5, 4xB: 3, 3xH: 3.0 m
 
4,700 €  
    request
123795930 1010

GIANT SK 201 D for sale


2015
Price  
  DE   request
123774103 102

ARAD Elite 800/3000 for sale


Guidance and lathe ARAD SNA - elite 800/3000 manufacturer: ARAD type: SNA - elite 800/3000 year: 1972 second-hand machine technical data: Center and lathe make: ARAD type SNA - elite 800/3000 year: BJ 1972 Mana g: conven ...

 
Guidance and lathe ARAD SNA - elite 800/3000 manufacturer: ARAD type: SNA - elite 800/3000 year: 1972 second-hand machine technical data: Center and lathe make: ARAD type SNA - elite 800/3000 year: BJ 1972 Mana g: conventional origin: Romania of cargo base: from stock turning diameter over bed 800 mm turning diameter over support 560 mm turning length 3000 mm spindle head DIN 55022 / Gr. 11 turning diameter in the offset 1060 mm spindle speeds 8-1250 RPM S "pindeldurchlass bed width 82 mm 555 mm overall power demand 18.5 kW machine weight approx. 5.7 t space approx. 5.3 x 1.5 x 1.6 m electrical 380 Volt coolant system faceplate 560 mm diameter coolant system quick change Toolpost" Multifix C "bezel fixed 4 - jaw Chuck 400 mm support / rapid traverse longitudinal + chip protection, transverse"
 
1,700 €  
    request
123795082 1900

MILWAUKEE M18BLDD-202X for sale


Weight approx.: 25 kgDimensions (l x w x h) approx.: 200x300x150 mmDescription: Available at 46414 Rhede, Germany 5 pieces Milwaukee cordless drill / driver M18BLDD-202X Battery voltage: 18 volts Battery capacity: 2.0 ...
used machine
 
Weight approx.: 25 kg
Dimensions (l x w x h) approx.: 200x300x150 mm
Description: Available at 46414 Rhede, Germany 5 pieces Milwaukee cordless drill / driver M18BLDD-202X Battery voltage: 18 volts Battery capacity: 2.0Ah Idling speed (1st / 2nd gear): 0 - 450 / 1,800 rpm Chuck clamping range: 1.5 - 13 millimeters Max. Drilling diameter (steel / wood): 13/38 mm Wood screws up to: 8 mm Max. Torque: 50 Nm Weight incl. Battery: 1.7 kg Product Information: Extremely handy: only 174 mm in length Brushless motor for up to 50% longer engine life REDLINK ? Electronics - Overload protection for long life of battery, motor and gearbox Electronics with stepless speed control 18-step torque adjustment Forward / reverse operation 13 mm FIXTEC metal keyless chuck with spindle lock Robust metal gear housing for a long service life Handle with soft grip pad LED lighting of the work area Battery charge gauge. Delivery: Cordless drill screwdriver M18 BLDD 2x 18V battery (2.0Ah) Charger: M12-18C belt clip Bit holder
2017
used machinery auction RESALE 890 €  
  DE   request
123768922 112

PFAUTER TYP RS2 rs2 for sale


Gear Hobber PFAUTER type RS2 Fabr. No. xxxxxxx Built 1952 Module size maximum Chapter 10 Gear diameter with thrust bearing Max 500 mm Gear diameter without bearing Max 1000 mm Tooth width of 375 mm Gear teeth numb ...

 
Gear Hobber PFAUTER type RS2
Fabr. No. xxxxxxx
Built 1952
Module size maximum Chapter 10
Gear diameter with thrust bearing Max 500 mm
Gear diameter without bearing Max 1000 mm
Tooth width of 375 mm
Gear teeth number 6 min
Axis distance workpiece tool 50-570 mm
Diameter of the clamping table 700 mm
Distance from the table to the top of the counter bearing 780 mm
Milling spindle mount Mt 5
Cutter dimensions Ã? 160 x 170 mm
Milling cutter speeds 35-180 RPM
Milling spindle adjustment 125 mm
Power 5,5 kW
Power supply 380 v, 50 Hz
-Bearing connected to the stand
-Constant velocity trimmer
-Transverse feed device
-Part Setup by hand
-1 piece tangential head
-Milling slide swivel through 180 ° for helical gears
-Cooling lubricant pump for circulating oil lubrication
-Change gears and differential change gear set in the adjoining storage cupboard
-15 piece hobbing cutter module 2 to module 8.5
-Post dollies
-multiple shots of workpiece
-Cabinet with electrical renewed a few years ago
-Manual
Dimensions L x W x H 2400 x 1400 x 2300 mm
Machine weight ton approx. 4.8.
good condition
TRUCK free loading
Board book with technical file
 
3,500 €  
    request
123795084 1900

MILWAUKEE M18BLDD-202X for sale


Weight approx.: 25 kgDimensions (l x w x h) approx.: 200x300x150 mmDescription: Available at 46414 Rhede, Germany 5 pieces Milwaukee cordless drill / driver M18BLDD-202X Battery voltage: 18 volts Battery capacity: 2.0 ...
used machine
 
Weight approx.: 25 kg
Dimensions (l x w x h) approx.: 200x300x150 mm
Description: Available at 46414 Rhede, Germany 5 pieces Milwaukee cordless drill / driver M18BLDD-202X Battery voltage: 18 volts Battery capacity: 2.0Ah Idling speed (1st / 2nd gear): 0 - 450 / 1,800 rpm Chuck clamping range: 1.5 - 13 millimeters Max. Drilling diameter (steel / wood): 13/38 mm Wood screws up to: 8 mm Max. Torque: 50 Nm Weight incl. Battery: 1.7 kg Product Information: Extremely handy: only 174 mm in length Brushless motor for up to 50% longer engine life REDLINK ? Electronics - Overload protection for long life of battery, motor and gearbox Electronics with stepless speed control 18-step torque adjustment Forward / reverse operation 13 mm FIXTEC metal keyless chuck with spindle lock Robust metal gear housing for a long service life Handle with soft grip pad LED lighting of the work area Battery charge gauge. Delivery: Cordless drill screwdriver M18 BLDD 2x 18V battery (2.0Ah) Charger: M12-18C belt clip Bit holder
2017
used machinery auction RESALE 890 €  
  DE   request
123764720 109

ORT RP 90 for sale
Gewinderollmaschinen


TYPE: Hydraulic T: 90 ROLLERS NUMBER: 2 RACK LENGTH: 300 mm. Capacity: Ø 10 ÷ 160 x 16 mm. Power: 60 kW Weight: 10000 Kg. YEAR built: 1992 Notes: Spindle diameter 100 mm. -Roller diameter 190 ÷ 310 mm. -Main  ...
used machine
 
TYPE: Hydraulic
T: 90
ROLLERS NUMBER: 2
RACK LENGTH: 300 mm.
Capacity: Ø 10 ÷ 160 x 16 mm.
Power: 60 kW
Weight: 10000 Kg.
YEAR built: 1992
Notes:
Spindle diameter 100 mm. -Roller diameter 190 ÷ 310 mm. -Main motor power 55 kW
Accessories:
Loading device-tilting rollers holder chucks ± 10°
1992
Price  
  IT   request
123795086 1900

MILWAUKEE M18BLDD-202X for sale


Weight approx.: 25 kgDimensions (l x w x h) approx.: 200x300x150 mmDescription: Available at 46414 Rhede, Germany 5 pieces Milwaukee cordless drill / driver M18BLDD-202X Battery voltage: 18 volts Battery capacity: 2. ...
used machine
 
Weight approx.: 25 kg
Dimensions (l x w x h) approx.: 200x300x150 mm
Description: Available at 46414 Rhede, Germany 5 pieces Milwaukee cordless drill / driver M18BLDD-202X Battery voltage: 18 volts Battery capacity: 2.0Ah Idling speed (1st / 2nd gear): 0 - 450 / 1,800 rpm Chuck clamping range: 1.5 - 13 millimeters Max. Drilling diameter (steel / wood): 13/38 mm Wood screws up to: 8 mm Max. Torque: 50 Nm Weight incl. Battery: 1.7 kg Product Information: Extremely handy: only 174 mm in length Brushless motor for up to 50% longer engine life REDLINK ? Electronics - Overload protection for long life of battery, motor and gearbox Electronics with stepless speed control 18-step torque adjustment Forward / reverse operation 13 mm FIXTEC metal keyless chuck with spindle lock Robust metal gear housing for a long service life Handle with soft grip pad LED lighting of the work area Battery charge gauge. Delivery: Cordless drill screwdriver M18 BLDD 2x 18V battery (2.0Ah) Charger: M12-18C belt clip Bit holder
2017
Price  
  DE   request
123764716 1403

HAUSHAHN VIASPEED / VIALOG for sale


AKL come for sale 5 x with each 72 m length (changeable) 8300 / storage size 600x400mm height / max load capacity 20 kg The system can be operated with Commission trucks also classic. Removing from KW08 / 2018 system  ...
used machine
 
AKL come for sale 5 x with each 72 m length (changeable)
8300 / storage size 600x400mm height / max load capacity 20 kg
The system can be operated with Commission trucks also classic.
Removing from KW08 / 2018 system can be visited by appointment
Price is for the construction of steel 72 meters left and right / shelves from location North Rhine-Westphalia finished disassembled, packed and shipped. Price ex. VAT
1997
20,000 €  
    request
123791143 702

WACHTE Etagenbackofen, Winkler, 18 qm for sale


type INFRA EE 520/180, model 09/1998\r\n5 decks, 1800 x 2000 mm\r\ncondition as it is, dismantled and loaded \r\n

 
type INFRA EE 520/180, model 09/1998\r\n5 decks, 1800 x 2000 mm\r\ncondition as it is, dismantled and loaded \r\n
 
Price  
    request
123764711 1403

KARDEX Kardex Shuttle 500 for sale


Kardex Shuttle in good conditions come 4 x for sale. All facilities have been maintained regularly. Plants are currently still active. Removing from KW09 / 2018 Visit possible. Disassembly by specialist companies. Mount ...
used machine
 
Kardex Shuttle in good conditions come 4 x for sale. All facilities have been maintained regularly. Plants are currently still active. Removing from KW09 / 2018
Visit possible. Disassembly by specialist companies. Mounting extra charge. Shuttle type year of construction 1997 / payload 2 x 10000 kg, 500-1300 x 863 / specialist floor load 250 kg under equally distributed load.
Location North Rhine-Westphalia. Price per piece NET ready disassembled, packed and loaded
1997
15,000 €  
    request
123790641 702

WINKLER/WACHTEL Stikkenofen, Winkler/Wachtel, Type Compakt for sale


computer control, baking-chamber for 1 rack\r\nrotating rack, for plates 580 x 780 mm, \r\ncomplete assembled loaded\r\n

 
computer control, baking-chamber for 1 rack\r\nrotating rack, for plates 580 x 780 mm, \r\ncomplete assembled loaded\r\n
 
Price  
    request
123764708 104

LIDKOPING for sale
Spitzenlosschleifmaschinen


Type: feeder for centerless Notes: Loading and unloading bench for Centerless length 6500 mm. -Cargo Warehouse

 
Type: feeder for centerless
Notes:
Loading and unloading bench for Centerless length 6500 mm. -Cargo Warehouse
 
Price  
  IT   request
123790681 702

WINKLER/WACHTEL Stikkenofen, Winkler/Wachtel, Type Compakt for sale


computer control, baking-chamber for 1 rack\r\nrotating rack, for plates 580 x 980 mm\r\ncomplete assembled loaded\r\n

 
computer control, baking-chamber for 1 rack\r\nrotating rack, for plates 580 x 980 mm\r\ncomplete assembled loaded\r\n
 
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter