liptovske strojarne used for sale

weight of the machine ca.: 16 t sheet width: 3150 mm sheet thickness - max.: 16 mm sheet width - min.: 1,6 mm voltage: 400 V range - high tensile: 3950x2475x2520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine in good technical condition, possibility of testing after agreement. Max. length of cut sheet: 3150mm Max. thickness of cut sheet: 6.3 mm Weight: 8500kg.

sheet width: 2050 mm plate thickness: 2,5 mm thickness at Niro-steel: 2,0 mm no. of strokes: 75 Hub/min cutting angle: 2°30 ° engine output: 3,0 kW table height: 810 mm weight of the machine ca.: 2400 kg. range L-W-H: 2600 x 1385 x 1600 mm Furnishing: - electrical backgauge, with analog display - Stop can be folded up - for longer sheet metal strips - welded monoblock steel construction - Special steel knives that can be used on both sides, hardened - Control panel and mechanical stroke counter - manual cutting gap adjustment - 3x support arms - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine in working condition

Cutting length 3,050 mm. Max. thickness 6.3 mm St 235 There is a set of spare knives for the scissors The scissors are fully operational and are in use.

Hmotnost stroje: 4400 kg Celkový příkon stroje:: 10,5 kW Upínací plocha stolu: 400 x 1500 mm Max. délka broušení: 1500 mm Max. šířka broušení: 470 mm Otáčky brousícího vřetena: 1470 , 1720 ot/min Max. hmotnost obrobku: 500 kg

The Strojane Piesok LODD 200 press brake was produced in 1982 by the Czechoslovak company Strojarne Piesok. The machine works with a force of 200 tons of pressure and allows bending sheet metal with a length of 4000 mm. The press is equipped with a table (L x W) 4000 x 200 mm, and its power is 22 kW. The total weight of the machine is 22,660 kg. Specifications of Strojane Piesok LODD 200 press - press force: 200 t - maximum bending length: 4000 mm - table dimensions (L x W): 4000 x 200 mm - upper tool maximum stroke: 100 mm - distance between table and slider: 200 mm - distance between body walls: 3300 mm - maximum number of clutch engagements: 14/min - main motor power: 22 kW - main motor speed: 1460 rpm - air pressure: 0,4-0,6 MPa - maximum air requirement: 25 m3/h - power supply: 380 V; 50 Hz - dimensions (L x W x H): 4420 x 2060 x 3800 mm - weight of the LODD 200 pre ...

Hydraulic Bending Machine Fabr. STROJARNE - PIESOK Type XONM 2000 / 2A - 2Machine -No: 237-516-1978, built in 1978Working length: 2050 mmMax. Sheet thickness: 2.0 mmbend to: 135 °Bending time: 3.5 sec.Stroke of the upper beam: 250 mmStroke of the lower cheek: 100 mmStroke of bending beam: 100 mmDrive power: 2.2 kWWeight approx: 2800 kgExternal dimensions approx: 3000 x 800 x 1600 mmWith- Separate hydraulic system- adjustable bending angleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic folding machine make STROJARNE - PIESOK type XONM 2000/2Technical specifications:Working length: 2050mmMax. sheet thickness: 2.0 mmbend up to:135°Bending time: 3.5 sec.Stroke of the upper beam: 250 mmStroke of the lower beam: 100 mmStroke of the bending beam: 100 mmDrive power: 2.2 kWWeight approx.: 2800 kgExternal dimensions approx.: 3000 x 800 x 1600 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine in good technical condition. Machine weight: 5300 kg Max. circling length: 2000 mm Max. sheet thickness: 12 mm Diameter of the upper cylinder: 220 mm Diameter of the lower cylinder: 200 mm Encircling speed: 6.2 mm/min

Machine parameters: Max. cutting length: 3150 mm Max. sheet thickness: 6 mm Machine weight: 6800 kg The machine is in perfect condition after GO, the following was done: grinding of blunt knives, resealing of working cylinders and their flanges, resealing of holders and sections, replacement of polyurethanes, replenishment of nitrogen, electrical repair. (Current invoice proving the scope of work of course)

Hydraulic guillotine for cutting sheet metal by ESPE Strojarne Piesok, type CNTA, 3150 mm x 6.3 mm (ST40). The machine has a variable knife gap and a hydraulically variable knife angle of 1 -2.5 degrees, set from the desktop. 11 kW motor. Machine weight 7 tons. Bumper departure 950 mm. Electrically adjustable cutting length in the range of 10-3150 mm. 2 supports to hold sheets of metal at the front of the machine, plus a ruler for cutting at a 90-degree angle. Light line enabling line cutting. Original O&M documentation and occupational health and safety manual in Polish. The machine is designed for continuous operation - 3 shifts.

The machine is in good technical condition, after agreement the possibility to test. Table clamping area: 200x630 mm Maximum grinding length: 630 mm Grinding wheel - diameter: 250 mm Grinding spindle speed: 2660 rpm. Maximum workpiece weight with chuck: 130 kg Total power input: 5.5 kW Weight: approx. 2200 kg Machine dimensions: (LxWxH): 2710x1495x1670 mm.

Type: CTO 250A / 4000 Parameters: 250 t, 4000 mm Manufacturer: Strojárne Piesok Year of production / SO / GO: 1987 / - / 2001 Location: Czech Republic Description: The machine is in good technical condition. Forming force: 250t Max. sheet length: 4000mm Table width: 250mm Working height: 800mm Unloading in stands: 315mm Max. stroke: 250mm Passage between stands: 3420mm Free lift speed: 65 mm / sec Power hl. electric motor: 15kW Press dimensions LxWxH: 4040x1850x2950mm

Type: XZMP 3150/16 Parameters: 3150 mm, 16 mm Manufacturer: Strojárne Piesok Year of production: 1984 Location: Czech Republic Description: Max. bending length 3150 mm Max. plate thickness 16 mm Min. inner diameter of rounded tube 550 mm Rolling speed 7 mm / min Roller adjustment speed 2x22 mm / min Machine dimensions LxWxH 7900x1930x2500 mm Machine weight 46800 kg

-Bending machine with 3 rollers, round roller, sheet metal bending machine, used tube bending machine; -Max. sheet width 1000 mm; -Max. sheet thickness (mild steel) 2 mm; -Geared motor VEM.

Type: CTO 80/2500 Parameters: 80 t, 2500 mm Manufacturer: Strojárně Piesok Year of production / SO / GO: - / - / - Description: The machine is in good technical condition. Nominal forming force: 80t Working table length: 2500mm Maximum stroke: 150mm Maximum distance of the table from the ram: 360mm Working height: 800mm Dimensions LxWxH: 3700 x 1250 x 2385mm Machine weight: 6550kg Upon agreement, the possibility of a tour in progress.

Inv. Num. : 5696 Type: LE 160 Producer: Východoslovenské Strojárne Košice Created: 1977 Parameters: Compressive force: 160 t Maximum stroke rate per minute: 45 1/min Stroke: 20-120 mm Plunger adjustment: 100 mm Machine weight: 8700 kg

The BRH 20.05 grinder is in good technical condition. Can be seen in operation by appointment. Machine weight: 1950 kg Clamping surface of the table: 230x630 mm Max. grinding length: 630 mm Max. grinding width: 230 mm Max. workpiece weight: 130 kg Machine dimensions lxwxh: 1288 x 2710 mm

STROJARNE PIESOK XZMP 3150/6.3C 3-roll plate rolling machine built in Czechoslovakia in 1983 is designed for pre-bending and rolling sheet metal into cylindrical or conical covers and segments. The machine is distinguished by a fully welded structure with increased rigidity and three high-quality 300 mm diameter rollers with longitudinal grooves for easy alignment of the sheet. The bottom rollers, driven by a high-performance motor with two stages of rotation, allow for vertical repositioning during pre-bending and coiling, and also allow for an offset to an inclined position when the claw couplings are opened. As a result, each of the four lower roll bearings can be freely adjusted in the pitch range. The XZMP plate rolling machine has a control panel with a function to monitor the position of the lower rollers directly on the numerical indicators. The total weight of the STROJARNE  ...