We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,786 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
used
1 LAFER carbon brush emerising/peaching machine type ULTRASOFT TWIN TOUCH, year 2018, table width 2200 mm, 2 brushing rollers, entry and exit in the same side, plaiter exit, dust suction and filters
used
Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer gearbox: SITI, type MI 60 FP VM/D6 -Speeds: approx. 30 rpm i= 45:1 -Manufacturer engine: Lafert type MS 63/4 -Power: 0.25 kW / 1370 rpm -Protection class: IP54 -Hollow shaft: Ø 25 x 120 mm -Dimensions: 400/125/H180 mm -Weight: 11.7 kg
used
Three-phase motor, electric motor -Manufacturer: Lafert, electric motor type MS63/4 -Power: 0.25kw -Speed: 1370 rpm -Shaft: Ø 14 x 40 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 240/123/H155 mm -Weight: 6 kg
used
-Horizontal Packing Machine -Manufacturer: Lafer Packaging SRL -Model: Cosmic -400 volts -Year of construction: 2013
used
Three-phase motor, electric motor -Manufacturer: Lafert, electric motor type AFS 63/4 -Power: 0.22 kW -Speed: 1307 rpm -Shaft: Ø 14 x 40 mm -Design: B14 -Protection class: IP 54 -Dimensions: 235/116/H160 mm -Weight: 5.4 kg
used
General SKU304M425 LocationBarneveld MakeLAFONTAINE TypeTwee wegklep asymmetrisch 95.116 No.65303 Year of construction1993 Main Features MaterialStainless steel Inlet diameter300 mm Specified Features - Diverter valve MaterialStainless steel Information Floorspace1,2x0,8 M Total height1,1 M Weight220 KG Extra SpecificationsPassage dia. 300mm Inlet dia. 300mm Outlet dia. (2x) 300mm Pneumatic operation Diverter valvesLafontaineRotary valves > Diverter valvesBrand > Lafontaine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1435 rpm -Shaft: Ø 28 x 57 mm -Construction: B5 -Protection class: IP 55 -Price: per piece -Number: 1 Stück -Dimensions: 365/273/H250 mm -Weight: 20 kg/piece
used
Gear motor, electric motor -Speed: 150 rpm -Power: 0.06 kW -Construction: B3 angle -Diameter hollow shaft: Ø 14 mm -Protection class: IP 54 -Dimensions: 285/120/H165 mm -Weight: 4.1 kg
used
Gear motor, electric motor -Speed: 138 rpm -Power: 0.06 kW -Construction: B3 angle -Diameter hollow shaft: Ø 14 mm -Protection class: IP 54 -Dimensions: 265/110/H165 mm -Weight: 3.7 kg
used
Fume cupboard function display DANTEC LAFA econ article number: 8080K0022 Supply voltage: 230 V AC 50 / 60 Hz used, tested ! Dimensions: 170 x 85 x 65 mm
used
This rotary valve was used, was only used for spare parts storage for a foreign project and was therefore never in use. The rotary conveyor thus has no operating hours and is in a new condition. The rotary valve, with square inlet, is suitable for the controlled supply and dosing of powdered and granulated bulk materials from silos, funnels, pneumatic conveyor systems, filter systems and cyclones. Name: Rotary valve Manufacturer: Sunds MDF Type: LAF-200 Year of construction: 2010 Material: Normal steel Drive motor: 11 kW Dimensions: L 3400 x W 2200 x H 2370 mm Empty weight: approx. 4500 kg Speed: 1475 / 22 Condition: Used Tech. Documentation: No Note: Inlet L: 1980 mm x W: 1180 mm, Outlet L: 2180 mm X W: 1000 mm, 7 chambers. The rotary valve has no operating hours and is in a new condition. Price: On request
used
I sell a manual cross-cut saw MAGGI BEST 960S, year of construction 2009 3-axis saw blade swivel: Vertical +-90° Horizontal radial +-90° Horizontal axial +-45° Motor power 3,0kW LAFERT Saw blade diameter fi.565x30mm (standard 500x30mm) Cutting length up to 960mm Cutting height up to 195mm (with saw blade 565mm) Cutting height at 45° to 115mm Machine weight 310 kg Machine size: L2400 x W1740 x H1680mm Very good condition. Available the same. CE equipment.
used
wheel alignment scissor lift 5t, galvanized, Specifications: Stroke underfloor 1,800mm, stroke above-ground 2,160 mm Overall length 5,200 mm, overall width 2,300 mm, ramp height 360 mm, platform length 5,200 mm, Platform width 729 mm, motor power 3 kW, electrical connection 230/400V, 50 Hz, compressed air connection 6-8 bar, Lifting time 45 sec., lowering time 45 sec. Characteristics: Electro-hydraulic drive,2 maintenance-free hydraulic cylinders, No mechanical connections between the rails,Maintenance-free roller lafers, HD unit integrated in the control panel, operation via push buttons with integrated storage option, Integrated hand pump and emergency lowering in case of power failure, Hydraulic synchronization system with automatic level compensation (master-slave system)Pneumatic set-down device with automatic pressure system. Unlocking, non-contact inductive proximity swit ...
used
Centrifugal pump, stainless steel pump, water pump, LAFERT 112 / 2 motor: 3.3 kW 220 / 380 V Dimensions: 510 x 300 x 240 mm
used
Vacuum pump, rotary vane vacuum pump BUSCH R5 RA 0100 F 503 ( R5RA0100F503 ) Pabs.: 0,1 hPa ( 0,1 mbar ) Vmax.: 120 m3/h n: max. 1800 rpm Connections: 1 1/4 ( inches ) Engine: LAFERT AMPH 100L/ A4-002 2,7 kW 1465 rpm 190 - 200 / 380 - 400 V 3AC 50 Hz IP55 60 Hz - operation is possible ! used, tested ! Dimensions: 690 x 410 x 470 mm
used
4. Mobile SAW Tractor unit OERLIKON Source STAMIC 1303 DC - cabel array with sealed multipin connector on tractor for better handling and shipping of unconnected machine - Controlbox SUBARC 3 - Tracor MEGATRAC 6 with Laser and Flux Reusing unit by nozzle controll unit for real welding speed externally - machine comes with OEM manual and literature You find further listed equipment for welding in additional auctions (doens not belong to this auction): 1. 1 SAW Tandem Welding Boom - Oerlikon UP Tandem Column And Boom fitted for 2 times 3,2mm wire Welding Column for Submerged Arc Welding SAW Tandem submerged arc welding Manufacturer: Welding System: Oerlikon / AirLiquide MFT 70X60 SO, built 2011 used until 2014 Column: Uniweld DIMENSIONS: high 8m; reach 6 m; dolly 3,7 m x 3,6 m Tandem Submerged Arc Welding - Starmatic 1303 DC - Starmatic 1003 AC/DC - Contro ...
used
Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer gearbox: Bonfiglioli type MVF 63/P -Speed speeds: approx. 29 rpm i= 45 -Manufacturer engine: Lafert type AFS 63/4 -Power: 0.22 kW / 1307 rpm -Design: B14 angle -Shaft: Ø 25 x 80 mm -Protection rating: IP 54 -Dimensions: 390/265/H195 mm -Weight: 13 kg
used
- Fully automatic water bottling line, from blowing to shrink/unit pack formation, and palletizing. (Bottle preform in - at the end the finished pallet is foiled out - this is how it works simplified) Currently: 2 liter PET, carbonated and still mineral water. (Possible upgrade to 0.5, 1.5 liter etc.) In the case of a 2-liter product: nominal capacity 8,500 bottles/hour (Productivity is proportionally higher in the case of a smaller volume) The power of the machine line can be further increased (the machine with the lowest power determines the maximum power of the line) - nominal capacity 8,500 b/h / 2L (b/h = bottle/hour) - compressor: Kaeser G1400 40 Bar - blower: Siedel SB016 No109: 17,500 b/h - air conveyor: Laffranchi - conveyor and buffer track - filling machine: Sarcmi RG8 202 1510/84 Selenia 70/8 02.076: 12,000 b/h - labeller: Sacmi Opera Ser.no: 10116262: 22,000 ...