Capacity: 2800 Watt volume: 100 L filter: HEPA : 230 mbar material: INOX Edelstahl Behälter : 5000 mm hose diam.: 32 mm : 5000 mm noise: 82 dB dimensions: LxBxH 50 x 50 x 135 cm weight: 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

sheet width - max.: 0340 mm coil weight: 1,00 t coil internal dia.: 265 - 565 mm total power requirement: kW weight of the machine ca.: 0,25 t dimensions of the machine ca.: 1,40 x 1,20 x 1,80 m construction: support segment – system no. - support segments 3 length – suppert segments 400 mm working direction left-right / right-left counter ring – Ø 1.600 mm shaft – Ø 70 mm height floor - middle of shaft 840 mm accessories: construction - pedestal construction - rectangular tube positioned under decoiler construction, to proceed the relocation by forklift or similar expanding process manually by bevel gear wheel brake system disc brake brake caliper pneumatically, manufacturer TWIFL ...

Code: 0141 Brand: MIHOMA - GERMANY Model: PSS Manual pendulum saw Blade diameter mm 400 Motor Hp 5,5 Roller conveyor length mm 4000 Overall dimensions mm 4000 x 1000 x 1700 h Weight kg 700  ...

• more information

USED KRONES GLASS BOTTLE FILLING LINE Item #: Usm-185 Category PET Filling Lines We Sell Glass bottle Line KRONES monoblock 1-KRONES monoblock - vacuum filler 4000 LPH, capping machine Al cap MCA 28, exclusively for still drinks (juices, syrups, alcohol) -relatively few hours of operation, control unit replaced -accessible accessories for glass bottle 200ml, 700ml & 1000ml 2-KRONES Binetta labeling machine, one label (possible and neck), 0,2 – 1 l volume. -accessible accessories 3-RINSER for glass bottles 4-Some conveyor belts. 5-Sleeve Machine, Sleeve Machine with electric tunnel Condition: Very good condition. All caracteristics you can see on pictures

A line for the production of water packed into PET bottles in the following formats: 0.5 L, 1.5 L and 2.0 L. Line capacity: approx. 15,000 bph The line consists of the machines sent in the previous messages: 1) KHS filling triblock filling machine 45-80-10 1998 (approx. 20,000 bph), control: SIEMENS S7-200 - washing KHS, Innoclean FR-EM 45 bottles - KHS filler, Innofill EV 80 - capping machine ALCOA KUPI 10/540 (max. 25.000 bph) 2) labelling machine KRONES Contiroll 745 - 2000 (16.000 bph), control: S7-300  3) PET BOTTLE BLOWING MACHINE - SIDEL SBO 16 - 1998 (16.000 bph) 4) packing machine with a tunnel - ZVT PSP 032 S, year 1998 5) device for controlling the l ...

Can filling line 30.000 cans/h for 0,5l - Depalletizer Transpak yera 2006 - Can rinser Trntech Hysek year 1998 - Flash Pasteurizer Arsopi year 2006, 150 hl - Buffer Tank Arsopi year 2006 - Monoblok Krones year 1997 - Can lid magazine - Seamer Ferrum year 1997 - Filling level inspector Krones 2 pcs. year 1997 - Can rotator 2 pcs. - Heater Krones year 1998 - Can dryer 2pcs. year 2013 - Trayer SMI LSK30T year 2005 - Multipack Kisters year 1993 - Code printer Videojet - Divider - Palletizer H&K-KHS year 1991 - Pallet magazine Kettner year 1981 - Pallet wrapper Haloila year 2006 - Pallet label aplicator Interex year 2017 - Conveyors

Ultra Clean Filling Line Krones 22000 bph for CSD in PET bottles - 2010 Complete ultra clean filling line for carbonated soft drinks, cider, water made by Krones and GEA in 2010. The line has been always serviced by Krones service and thus in excellent condition. Blow moulding, rinssing, filling and capping compartment of the line is ultra clean. All these machines are connected to each other’s and they are forming a closed ultra clean compartment where bottles are transferred without conveyors from machine to machine. Filling valves are sterilized with steam and the rest with Preracetic Acid C2H4O3 solution. Process department is made by GEA and it can produce various aseptic products ...

Wet Aseptic Filling Line Krones PET 18000 bph Excellent condition Krones Dry Aseptic PET line for non-carbonated demanding products like smoothies, juices and dairy products without CO2. The line was commissioned in year 2018 by Krones and having only less than 12000 total operating hours. This line was purchased by current owner for contract filling so called Innocent Smoothies in 250ml, 360ml and 750 ml PET bottles with D38ml neck format. It has large GEA made aseptic processing plant for product treatment before filling. Blow moulder is Krones Contiform 310 PRO with 10 cavities, Contipure D preform disinfection system and for energy savings there is an infrared linear oven with cerami ...

Cardboard packer with 3 heads  ...

• more information

Bottling Line | KRONES Year: 2003 – 2018 Speed: 14.000 BPH Direction: Clockwise Blower KRONES C310 10 cavities Preforms tilter and hopper Stamp: 0.50L – 0.90L – 1L – 1.5L – 1.5L – 2L Isobaric filling monoblock BC 70.70.10 Rinser 70 clamps Filler 70 valves Capper 10 heads – Cap Alaska (3P) and BPF 28mm Labeller KRONES 18 heads – Roll fed Air conveyors ZECCHETTI Ozonator Caps elevator Saturator CIP system Dryer bottles Bottle inspector (label - cap - level) Laser marker Accumulation table SYMPAK shrinkwrapper Devider (da 1 o 2 file) Palletizer SYMPAK Pallet wrapper Compressor BOGE low pressure Booster SIAD