krom schröder used for sale

R25187/17 PASQUINI & KROMER label machine model: Pakromat 250 S/2 age: 1999 about 1500 working hours available: immediately dimension: length: 3,5 m, height :2,10 m, depth ca. 1,7 m permanently maintained Available: sofort

Kromel screw conveyor is used in various industries for moving variety of materials. It operates by using a rotating helical screw blade within a tube or trough to move products to a given height or distance. Equipped with continuous feed product shredder which allows for the continual feeding of meat into the machine without stopping, saving processing time. Continuous feed shredders are more efficient compared to batch shredders, where the machine needs to be stopped to remove the product​. Whole construction made of stainless steel, which guarantees the highest hygiene and ease of maintenance. Loading height: 1300mm / 1000mm without product shredder Unloading height (regulated): 2250mm or 1850mm Distance between loading and unloading section: 3700mm Total length: 4200mm Tube diameter: 200mm

1 piece Wampfler 12.5 - 20 kg 9 pieces Kromer (Hahn & Kolb) 12.5 - 20 kg

Heated surfacefinishing machine for Zink-magnesium coating Tank capacity : 150 l Heating power: 20 kW Weight: 1230 kg

Kroma Fish gutting machine Gutmaster 1200 Serial: 19090 2007, stainless, up to 65 fish per min, electrically controlled touch screen controls, with flighted elevator conveyor outfeed 3Ph

Kroma Fish gutting machine Model: Gutmaster 1200W Serial: 200031 2012, stainless up to 65 fish per min, electrically controlled touch screen controls, with flighted elevator conveyor outfeed, 3Ph

Footprint: 1950x400x760 mm Power: 1.5 kW Weight: 436 kg Dimensions: 1950 x 900 x 1700 mm

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Gas solenoid valve -Connection: 220/240 V 50/60 Hz -Pe.: 1800 mbar -Weight: 1.7 kg

BATCH TYPE PASTEURIZATION TANK SUITABLE FOR HEATING AND COOLING TYPE: Jacketed and insulated tank CAPACITY: 1.000 l/h milk INCLUDING: Paddle mixer with motor and reductor, thermomter and manhole. Batch pasteurizer tank for milk, juice, dairy productsetc They are heated by steam, pressure max. 2 BAR. ( they are jackated and insulated ) Outer dimensions are as below; Diameter: 130 cm Height: 160 cm The motor power of the mixer is 0,75 kW. There is a thermometer mounted on the top to see the product temperature. There is a CIP ball mounted on top inside in order to clean the tank. There are side plates to prevent vortex inside. 2 PCS AVAILABLE

Signal towers, signal lights, signal lamp, indicator light -LED lights: 7 pieces, accessories kromschröder DL, DG ovp -Type: 230V red/green Order No. 74923275 -Price: complete -Dimensions each: 110/15/5 mm -Weight: 0.01 kg/pc.

Pressure switch, pressure switch, pressure limiter, gas pressure switch, gas pressure switch, gas pressure switch -Manufacturer: Kromschröder, gas pressure switch orig -Type: DG500U-6T2 84447564 -Control range: 100-500 mbar -Pmax.: 600 mbar -Dimensions cardboard: 120/100/H85 mm -Weight: 0.4 kg

Pressure monitor, pressure switch, pressure limiter, gas pressure switch, gas pressure switch, gas pressure switch -Manufacturer: Kromschröder, gas pressure switch orig -Type: DG50UG-6K2 84447379 -Control range: 2.5 - 50 mbar -Pmax.: 500 mbar -Dimensions cardboard: 120/100/H85 mm -Weight: 0.4 kg

Line regulating valve, shut-off valve, pressure relief valve, shut-off valve, safety shut-off valve, safety relief valve, pressure monitor, pressure switch, pressure regulator, gas pressure regulator, gas pressure regulator, flow meter, flow meter, gas meter, quantometer -Manufacturer: Kromschroeder, flow meter -Type: DM 65Z50-40 -Qmax: 100 m³/h -Pmax: 4 bar -Dimension box: 300/220/H155 mm -Weight: 2,7 kg

Line regulating valve, shut-off valve, pressure relief valve, shut-off valve, safety shut-off valve, safety relief valve, pressure monitor, pressure switch, pressure regulator, gas pressure regulator, gas pressure regulator -Manufacturer: Kromschroeder, gas pressure regulator unused in original packaging -Type: VGBF 15R40-1 -PN: 4 bar -Dimension: Ø132 x 175 mm -Weight: 1.1kg

High-frequency ignition device, heating, gas and oil burner, automatic burner control, gas relay, control box, burner control, burner management, UV flame simulator, ignition transformer -Manufacturer: Kromschroder, ignition transformer -Type: E 4718/54 -Number: 3x ignition transformer available -Price: per piece -Dimensions: 65/85/H35 mm -Weight: 0.3 kg/piece

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG6UG-3 -Control range: 0.4-6 mbar -Pmax.: 600 mbar -Dimensions: 75/75/70 mm -Weight: 0.3 kg

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG50UG-6Z MIN -Control range: 2.5-50 mbar -Pmax.: 600 mbar -Dimensions: 115/75/70 mm -Weight: 0.3 kg

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch unused OVP -Type: DG10U-6T -Control range: 1-10 mbar -Pmax.: 600 mbar -Dimensions box: 75/75/70 mm -Weight: 0.4 kg

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG500U-6T -Control range: 100-500 mbar -Pmax.: 600 mbar -Dimensions: 75/75/70 mm -Weight: 0.3 kg

Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, gas solenoid valve -Manufacturer: Kromschroder, gas solenoid valve -Type: MK 5 R3 B2891 -Pmax.: 130 mbar -Voltage: 220/240 V -Dimensions: 375/115/130 mm -Weight: 7 kg

heating, gas and oil burner, automatic burner control, gas relay, control box, burner control, burner management, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: Kromschroder, gas pressure regulator unused OVP -Type: GDJ15R04-0 -p max.: 400 mbar -Dimension box: 110/130/H100 mm -Weight: 0.6 kg

Switchgear, control system, flame sensor, flame monitor, UV flame sensor, UV sensor, control unit -Manufacturer: Kromschroder, flame monitor unused in original packaging -Type: IFW 50W/R -Dimension box: 90/90/H100 mm -Weight: 0.5 kg

Vacuum pump, rotary vane pump -Drive: 1.6 kW -Flow rate: m³/h -Max. Pressure: mbar -Speed: 2850 rpm -Inlet: Ø 43 mm -Output: Ø 43 mm -Price: per piece -Number: 1x available -Dimensions: 360/220/H215 mm -Weight: 20 kg

Automatic burner control, Burner Control -Manufacturer: Kromschroder -Type: TC 410-10T -Number: 1x machine available -Price: per piece -Dimensions: 115/100/H120 mm -Weight: 0.4 kg

Gas filter KROMSCHRÖDER GRP 20R40-4 81936100 installation length: 92 mm connection internal thread: 3/4 ( inch ) Pmax.: 4 bar T: -15 °C - +80 °C Material ( housing ): Aluminum alloy ( ALSi ) used, tested ! Dimensions: 91 x 88 x 90 mm

Pressure switch KROM SCHRÖDER DL5K pmax 300 mbar 0.5 to 5 mbar Dimensions: 95 x 90 x 50 mm

We are selling our 1958 Probat G45. This machine is always been serviced by Schuilenburg (Probat dealer in Belgium) also updated in the early nineties. Machine is still operational. Probes are fitted on the machine and connected to Cropster at the moment. Gas regulation is upgraded to Krom Schroder, fully automatic ignition. Possibility to reconnect the water spraying in the machine as well (to reduce the lost of weight) I disconected it. There is a Probat smoke burner as well, but the engine(Weishaupt) needs replacement.

Schroeder-Combinator / scraped surface heat exchanger technical details: capacity/ flow rate: 20-100 ltr/h against 12 bar engine power: 3,5 KW dimensions: length x with x higth : 170 x 43 x 85 cm weight ca.: 150 kg with this device you can go with: hight viscosity and lumpy food for heating, cooling, mixing and pumping

Ladies and gentlemen, Below you will submit a non-binding offer for a foundry plant: 1 piece br. Endogas production plant, make LOI natural gas-heated, with modern measuring/control and control system and modern KROMSCHRÖDER torches, solid top fittings, compressors with separate mounted shaft and separate motor, 100 Nm3/h in 3-stage version, power min. 35 Nm3/h The power can be reduced to 40 Nm3/h. The operation of the system can also be carried out in a 1-stage manner, so that the power can be reduced accordingly. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...

Type: Jumbo KODUKO 16-500 / DF510 / SKM103-03 Capacity: 2500 kg / h Cooking time: 120 min Type: Schroder DF510 Hopper diameter: 600 mm Hopper lenght: 520 mm Power: 0.12 kW Type: Schroder SKM103 Dimension: 2500 x 3375 x 2510

Sheet thickness: 4,00 mm Folding length: 3200 mm Depth rear gauge: 0 mm CNC Brand: Delem CNC Model: DA 65 MACH-id   5164 MAKE        Fasti Schroder Germany TYPE          215 - 32- 4 YOP            1998 SPECIFICATIONS Control     Delem DA 65 Pressbrake / Folding / Mech. / Hydr.     Folding machine Hydraulic     Hydraulic / Mechanical      Hydraulic Bending length    3200 mm Stroke      350 mm Die height       80 mm Power      7 .5 Kw DIMENSIONS Length       4000 mm Width         3000 mm Height        2000 mm

Dough knitting machine - Make: SCHNÖDER - Model: FORTUNA Automat Gr. 3 - With new working plate - Condition: Used, restored - Warranty: 6 months

Dough dividing and moulding machine Make: SCHRÃ?DER Model: FORTUNA A-3 slot 30-piece set With 3 new casting plates -top obsolete -with warranty -Delivery: free house within Germany

SCHROEDER Plate shears Product number 821741 Manufacturer SCHRODER Model / type unknown Year of manufacture 1998

The gas flare was intended for a research project that could not be carried out. It is brand new and in its original packaging. The torch is supplied as a complete "package unit" with an on-site control cabinet made of CrNi steel. The torch can be installed both indoors and outdoors, but the torch should be visible to the operator of the control cabinet. 1.1 Pilot burner / biogas support burner with fittings The equipment of the pilot biogas burner unit consists of the following components: - Shut-off ball valve DN25, approved for biogas - Biogas filter DN25 - Pressure regulator DN25 - Pressure gauge with "push-button shutdown", 0-100 mbar, approved for biogas - Gas solenoid valve DN 25, make: Kromschröder, type VAS 125R/LW - Flame arrester DN25, make: Protego, FA-G1" IIA1-P2,2 - Biogas burner nozzle (4 pcs.) 1.2 Process gas burners with fittings The equipment of the p ...

Type: UTK 18 200-2a-2e Power: 2 X 11 kW + 1 X 7.5 of kW, 380 V, 50 Hz Perslucht: max 20-25 bar Weight: 4,000 kg YOM 1985 Scraped surface heat exchanger for heating, temperature holding and cooling of liquid, vegetable, high viscous and crystalline products. Previous used for heating, holding (volume ± 85 ltr) and with steam cooling of food products (sauces) and ammonia (NH3, 125 ltr., 17 bar,-20 ° C / 45 ° C). 2 independent ammonia system. Constant quality of the product, continuous running and inline cleaning system (CIP).

Schröder MAK 3 3000mm bending length 2 upper beam tools. 1 edge rail 3000mm 1 goat foot rail 125mm high segmented 3000mm 2 lower cheek tools for different material thicknesses. Up to Max 4mm S235 POS 2000 control CNC control Depth stop up to Max 1000mm

Capacity: 3200 x 3mm Renewed control panel from Schroder (original) New encoders and recently spindles High and sharp upper blade Hydraulic automatic top clamping

Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm

Pickle injector / steaker, make Schröder, type NT 350, year 2001, with plastic link belt, width 600 mm

Type: SCHRÖDER N 82 Number of needles: 82 Diameter of needles: 3 mm Product width: 420 mm Transportation type: walking beam Product passage height: 180 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 110,0 Width with filter for brine: 200,0 Length: 210,0 Height: 200,0 Compressed air: 6bar Power: 9,0 kW, 15А Voltage: 380 V, 50 Hz

SCHRÖDER DM-500 ID.NO. 2117 Schröder DM-500 brine mixer with mixer and pusher that goes up and down. Dimensions 135 x 135 cm H 180 cm. Available 4x in stock.

Scraped surface heat exchanger, 2 Cylinders, Top cylinder: diameter: 25cm, rotor: 22,8 cm Length: 120 cm surface: 0,94 m2 Bottom cylinder diameter 33.5 cm, rotor diameter 31.5 cm, length 140 cm surface: 1.47 m2. 2 x electric drive motor: Top: 11 kW, 23A - 50 Hz, bottom: 18.5 kW, 36A - 50 Hz

Working width: 2500mm, bending capacity: 3mm, connected load: 5kVA, weight: 3.5t.

Type: SCHRODER N 120 Number of needles: 120 Diameter of needles: 3 mm Product width: 620 mm Transportation type: walking beam Product passage height: 180 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 120,0 Width with filter for brine: 200,0 Length: 220,0 Height: 225,0 Compressed air: 6,0 bar Power: 14,0 kW Voltage: 380 V, 50 Hz

Type: : Schröder N 138 Number of needles: 138 Diameter of needles: 4,0 mm Product width: 620 mm Transportation type: walking beam Product passage height: 200 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 110,0 Length: 220,0 Height: 230,0 Power: 10,0 kW Voltage: 380 V, 50 Hz

Opening height: 120mm, motor power: 0.75kW, length: 1600mm, width: 1000mm, height: 1700mm, weight: 350kg.

Compressed air supply: 4bar, power: 8.5kW.

Type: MAX 500 Max. product weight: 500 кg. Drum diameter: 1000 mm Machine dimensions in mm: Width: 1600,0 Lenght: 3100,0 (incl. loading trolley) Height : 2300,0 Unloading height: 750,0 mm. Vacuum pump: 40 m3/h Power: 4,0 kW Voltage: 3х400 V, 50 Hz, 8,0 A Weight: 760 кg.