Krauss Maffei hose pouring machine type: KM 650-4350 BM, with Robo control: MC 3 construction year: In 1993 Schliesseinheit Schliesskraft t: 650 opening ways mm: In 1750 cross-beam measure mm: 1000 x 900 installation heights min / max. mm: 600 record size: 1430 x 1350 hose unity snail diameter mm: 85 hose weights gr: In 1965 hose volumes cm?: 2195 hose pressure cash: In 1993 mass and weights dimensions LxBxH m: 12.5 x 2.50 x 2, 3 machine weights kg: 35.000/12.000 other Neureder robot

Krauss Maffei injection moulding machine Type: KM 1300-8000 MC-2, with Kuka robot Control: MC4 Built: 2003 Locking unit Locking power t: 1300 Opening path mm: 2250 Holm Measure mm: 1500x1250 installation height min/max mm: 800/1400 Plate size: 2140x1960 Spray unit Snail diameter mm: 115 spray weight gr: 4962 Spray volume cc: 5453 spray pressure to be: 1482 Dimensions and weights Dimensions LxBxH m: 12.16 x 3.49 x 2.58 Machine Weight kg: 60,000/37,000 Other Kuka robot Conyvor Band Cascades: 16 Core Trains: 7 (fixed side), 6 (moving side) and one pneumatic per side hot channel paths: 64

Krauss Maffei LRX-S 150-0956 X-axis dimension 900 mm Y-axis dimensions 1400 mm Z axis dimension 2500 mm Lift capacity 15 kg C-steering axles Servo drive ...

• more information

Krauss Maffei LRX150-0604 X-axis dimension 900 mm Y-axis dimensions 1800 mm Z axis dimension 3000 mm C-steering axles Servo drive ...

• more information

Krauss Maffei LRX150S-0469 X-axis dimension 900 mm Y-axis dimensions 1400 mm Z axis dimension 2500 mm Load capacity 20 kg C-steering axles Servo drive ...

• more information

Krauss KM 1000-5700 M Injection Moulding Machine The machine is not in used after the maintenance was done 3-4 years ago.Plastic parts (some gaskets and O-rings) will need to be overhauled due to waiting time. Last service history: It was stated that there was a problem with the injection ratio. It has been reported that there is no electricity to the proportional valve. The electronic card has been sent to the service. In the service check, we were told that the card was working without any problems. To sum up, it needs some maintenance

Description: working hours: approx. 41041 hrs. 3axis robot serial number: 2112257 IMM type: Thermoset IMM serial number: 51019359 clamping force: 160 tons production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 115 cm3 max. spec. injection pressure: 1488 max. stroke opening: 950 mm max. mould thickness: 950 mm min. mould thickness: 300 mm tie bars distance horizontal: 520 mm tie bars distance vertical: 520 mm locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 75 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW  , please also have a look at the video of this machine Approx. Onsit ...

Description: Travel paths , X 900 mm, Y 1800 mm, Z ,2500 mm, C 0 to 90° pneumatic Including enclosure 1400 x 2400 x 2100 mm Conveyor belt 590 x 2540 mm, height-adjustable Approx. Onsite Dimension. (l x w x h): 4,500 x 1,500 x 3,000 mm, weight approx.: 550 kg ...

• more information

Description: closing force: ,1200 kN auger diameter: ,35 mm ejection stroke: ,160 mm batch volume: ,61,09 cm3 injection speed: ,288,6 cm3/s injection pressure: ,2429 bar Approx. Onsite Dimension. (l x w x h): 6,000 x 1,700 x 2,000 mm, weight approx.: 9,700 kg ...

• more information

Type of machine: KM 200-1400 C2 Year of construction: 2000 Shipping time: Immediately Cargo base: From site Control type: MC4 Screen text: German Hours of operation: 57000 h Price: On request Technical details Clamping unit Clamping force: 2000 kN Tool opening force, Max: 101 kN Driving force open movable plate: 50 kN Driving force close moving plate: 42 kN Mounting plate (h x v): 915 mm x 915 mm Clear width (h x v): 560 mm x 560 mm Tool unclamping stroke: 700 mm Min. mould installation height: 350 mm Opening width: 1050 mm Ejector stroke: 200 mm Ejector force forward/back: 58/28 kN Injection unit Screw diameter: 55 mm Ls/D ratio: 23 Injection pressure: 2380 bar Displacement: 570 cc : Shot w ...