Krauss Maffei hose pouring machine type: KM 110-700 C1 control: MC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 110 cross-beam measures mm: 470 installation height min / max. mm: min 300 record sizes: 745 x 770 hose unity snail diameter mm: 50 hose weights gr: 343 hose volumes cm?: 377 hose pressure cash: In 1892 mass and weights dimensions LxBxH m: 4.6 x 1.4 x 2.1 machine weights kg: 7000 other 2 x nuclear train, accumulator, new hydraulic tubes, Hydromotor anew. Heisskanal 4 zones

KRAUSS MAFFEI KM 110-520 C1 warehouse no.: 503020 manufacturer: KRAUSS MAFFEI type: KM 110-520 C1 controller: MC4 year of construction: 2003 technical data clamping unit clamping force: 1100 kN distance between tie bars h:: 470 mm distance between tie bars v:: 470 mm size of mould plates h: 745 mm size of mould plates v: 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1485 kg technical data injection unit screw diameter: 40 mm swept volume: 217 ccm injection pressure: 2377 bar scr ...

Manufacturer: Krauss Maffei Type: KM 110 - 520 C2 Year of construction: 2003 Control: MC 4 Closing force: 1100 kN Closing type: Hydraulish Tie bar spacing: 470 mm x 470 mm Plate size: 745 mm x 770 mm Tool height: min 300 mm Opening distance: 600 mm Plate spacing max.: 900 mm Screw: 40 mm Lifting volume: 217 ccm Injection weight PS: 198 gram HP Injection pressure: 2377 bar general Engine: 18.5 kW Heating: 13 kW Dimensions: 4.5 m x 1.5 m x 2.2 m Weight: 6000 kg Screen text: German / English Additional equipment Robot interface Core train: x1 Accu

Clamping force: 1100kN, tie bar distance: 470x470mmm, opening stroke: 1000mm, screw diameter: 40mm, max. stroke volume: 201cm³, controls: MC5, length: 4600mm, width: 2650mm, height: 2250mm, weight: 7.9t, operational hours counter: 65,200h, with Krauss Maffei LR100, 6x hoist channel control points, 4x core pull, blow-out unit, pressure accumulator, separating flap, energy saving circuit, ALS interface, 20mA interface and colour metering unit interface.

KRAUSS MAFFEI KM 110-520 C1 injection moulding machine was built in Germany in 2003. The machine used in production plants produces top-quality plastic products using the injection moulding method, which involves feeding a plastic material of sufficient plasticity into an injection mould, which is then clamped with a high force of 110 tonnes. To ensure the highest possible operating efficiency and productivity, the machine uses reliable components, such as a powerful screw with a diameter of 45 mm and an ejector with a force of 22 kN. The KRAUSS MAFFEI KM 110/520 C1 injection moulding machine weights 6000 kg. Technical data of the KRAUSS MAFFEI KM 110-520 C1 injection moulding machine - ...

Clamping force: 110 tons Closure system: hydraulic Plate dimensions (H x V): 745x770 mm Dimensions between guide bars (H x V): 470x470 mm Mold min. thickness: 300 mm Screw diameter: 50 mm Injection volume: 393 cm3 Injection weight in PS: 358 g Pressure on material: 1892 bar Length x Width x Height: 5,0 x 1,6 x 2,0 m Weight: 7800 kg Year: 2007 Equipment: Hydraulic ejector Ejector stroke: 150 mm Ejector force: 22,6/9,9 kN Cooling circuits: 8 Pneumatic valves: 1

Clamping unit Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] min 300 Injection Unit Screw diameter [mm] 50 Injection volume [cm3]: 393 Injection weight [g] 358 Injection pressure [bar] 1892 Dimensions & Weight Net weight with control cabinet [t] 7,8 Dimensions (L x W x H) [m] 5.0 x 1.6 x 2.0

Closing unit Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 300 Maximum opening width [mm] 900 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Electrical and hydraulic equipment Rated power of the pump motor [kW] 18.5 Heater power [kW] 13 Dimensions and weight Net weight with control cabinet [t] 6 Dimensions (length x width x height) [m] 4.48 x 1.51 x 2.19 Additional equipment: Single-phase plastic feeder Picker

-KM 110-380 CX PVC - Mold clamping force: 1100 kN - Mold opening force: 70 kN - Mounting plate dimensions (H x W): 745 x 770 mm - Clearance between columns (H x W): 470 x 470 mm - Mold opening stroke: 600 mm - Minimum mold height: 300 mm - Opening width: 900 mm - Ejector stroke: mm 150 - Ejector force forward / backward: 22.6 / 9.8 kN Injection unit - Screw diameter: 35 mm - Ls / D ratio: - 22.9 - Injection pressure: 2429 bar - Injection volume: cm3 154 - Injection weight 1): 140 g - Injection capacity: cm3 / s - Screw rotation speed, standard speed 390 - Plasticizing capacity 1): - with standard screw speed: g / s 22.1 Electrical and hydraulic equipment - Pump motor rate ...

Krauss Maffei KM 110-520 C1 injection molding machine Year of production - 2004 Fully hydraulic locking system. MC4 control system with color monitor, integrated control panel and built-in disk drive Plasticizing system 1 complete plasticizing system for thermoplastics, abrasive version, 45 mm screw diameter, with backlatch and open nozzle TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Closing unit: - Mold closing force: 1100 kN - Mold opening force: 70 kN - Movement force of the movable plate clamping the mold - - - opening: 35 kN - closing: kN 28 - Mounting plate dimensions (h x v): mm 745 x 770 - Clearance between columns (h x v): mm 470 x 470 - Way of opening the mold: ...