kobran used for sale

350 Ton Crawler Crane KOBELCO”, Model CKE4000C Mastertech (2007) Max. Lifting Capacity - 350 t /6.0 m Boom Length - 18 m to 78 m Main & Aux. winch Max . Line speed: 130 m/min (5th layer) Wire Rope: 28 mm Brake Type: Spring set hydraulically release brake Working speed Swing Speed: 1.3 min-1 {rpm} Travel Speed: 1.0/0.4 km/h Power Plant HINO”, Model K13C-UV Engine Output: 295 kW/2,000 min-1 {rpm} Fuel Tank Capacity: 600 liters Hydraulic System Main Pumps: 6 variable displacement pump Max. Pressure: 31.9 MPa {325 kgf/ cm2 } Self-Erection Device Weights Operation Weight: Approx. 346 t Counterweight: Std. 120 t (Upper) + 41 t (Lower) Transport Weight: 60.0 t (Main machine) Ground Pressure: 150 kPa {1.52 kgf/cm2 } Make KOBELCO Year 2007 Capacity 350

Kobelco Twin Screw Roller Head Extruder (horizontal type), Model TSR-330 Roller die assembly (TSR-33H005H) 38in wide x 16in dia Roller die moves away from the extruder/mixer section via hydraulic ram. driven by 102kW DC variable speed motor through Hansen reduction gearbox (on flexible coupling so roller die can move forwards/back). Twin screw dump extruder 330mm screw dia driven by 90kW DC variable speed motor through Hanson reduction gearbox. In very good condition. Previously running underneath an F270 Banbury. Complete with all controls, manuals and documentation etc.

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Kobelco SK500LC-9, 271 kW, 50500kg

Qty. 1 Second-hand complete 12-Hi reversing cold rolling mill incl. sand blast line Mfc.: Kobelco Type: 12-Hi reversing Built: 1986 Strip width: 900 – 1250 mm Thickness: Entry: 3.2 mm Exit: 0.4 mm Rolling speed: 120/300 m/min.

Qty. 1 Second-hand extrusion press Mfc.: Kobe Steel Built: 1985 Force: 1500 MT Type: Horizontal 4 cylinders, indirect press, independent Control Billet dimensions: dia. 175 mm x 400 – 800 mm Length Application: Extruded?Copper?Alloys

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer gearbox: ZAE geared motor with brake -Gear: Type M 50 B i = 40 : 1 -Speed: 7/70 rpm -Motor: Kobold type PO619-3-16/2MB -Power: 0,04/0.55 kW / 280 /2800 rpm -Shaft: Ø 20 x 25 mm / 23 x 48 mm -Protection class: IP44 -Brake: 8 Nm -fan motor -Dimensions: 610/195/H183 mm -Weight: 26 kg

Gauge block box, gauge blocks, gauge block holder -Manufacturer: Koba, gauge block holder with quick adjustment -Type: 100-200 -Dimension: 105/70/H325 mm -Weight: 1.3 kg

Three-phase motor, electric motor, brake motor -Manufacturer: Kobold, electric motor brake motor type KOD 467 ma -Power: 0.12 kw -Speed: 920 rpm -Shaft: Ø 11 x 20 mm -Construction: B14 -Protection class: P 33 -Brake: 0.37 kp/m -Dimensions: 245/160/H115 mm -Weight: 6.0 kg

Three-phase motor, electric motor -Manufacturer: Kobold, electric motor type KOD 566 -Power: 0.18kw -Speed: 920 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Dimensions: 205/175/H130 mm -Weight: 5.5kg

Make: Kobelco Model: SK2200D Serial number: YZ05-04003 Height Reach: 42 metres Capacity: 200 tons Working hours: Only 35,617 Condition: Very good. Contact us at infoheeyas.co.uk #kobelc0 #crane #demolition #construction #heavyequipment #loading #japan #cranes #buildingcrane

Description: Parallel gauge block '100' from Kolb & Baumann (KOBA), product information: Dimensions 100x 30 x 9 mm, including transport box, quantity = 1 piece Approx. Onsite Dimension. (l x w x h): 140 x 65 x 45 mm, weight approx.: 1 kg

Mini excavator, Manufacturer: KOBELCO, Type: SK 55 SRX-6, Year of manufacture: 2019, Fuel: Diesel, Total weight (kg): 5,850, Read operating hours (h): 2,172, Vehicle identification no.: R05734, 1 bucket package, consisting of: 1 ditch cleaning bucket approx. 140cm, 2 backhoe buckets approx. 45/50cm, radio, advertising foiling, damage: all around Traces of use

Mini excavator, Manufacturer: KOBELCO, Type: SK19, Year of manufacture: 2021, Fuel: Diesel, Total weight (kg): 2,300, Operating hours read (h): 579, Vehicle identification no.: 21703525, Chassis adjustable in width, 1 bucket package, consisting of: 1 ditch cleaning bucket approx. 100 cm, 2 backhoe buckets approx. 40/60 cm, Advertising foiling, Damage: all around Traces of use

Mini excavator, Manufacturer: KOBELCO, Type: SK 28SR-6E, Year of manufacture: 2021, Fuel: Diesel, Total weight (kg): 4,580, Read operating hours (h): 940, Vehicle identification no.: R01066, 1 bucket package, consisting of: 1 ditch cleaning bucket approx. 120 cm, 2 backhoe buckets approx. 35 cm, 1x with teeth/1x without teeth, advertising foiling, damage: all around Traces of use

Drums: 3 pieces, top and bottom 2 pieces, with felt covering, center steel roller heated. Roller width: 3150mm, fabric width: 2890mm, heating: steam-heated, accessories: 2 spare rollers not overhauled.

Gear motor, electric motor -Speed: 61 rpm -Power: 0.37 kW -Construction: B14 angle -Diameter shaft: Ø 24 mm -Brake: 24 V -Protection class: tropicalized -Weight: 15 kg

Gear motor, electric motor -Speed: 61 rpm -Power: 0.37 kW -Construction: B14 angle -Diameter shaft: Ø 24 mm -Brake: 24 V -Protection class: tropicalized -Weight: 15 kg

Gear motor, electric motor -Speed: 56.6 rpm -Power: 0.6 kW -Construction: B5 -Diameter shaft: Ø 28 mm -Brake: 24 V -Protection class: tropicalized -Weight: 23 kg

Measuring device for air conditioning units, air conditioning systems, cooling units -Type: -with: various hoses -Foot: pressure pump -Number: 1x measuring devices with suitcases available -Price: per piece -Dimensions: 340/130/H260 mm -Weight: 5.3 kg

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 2850 rpm -Shaft: Ø 20 x 75 mm -Construction: B14 -Protection class: IP 44 -Dimensions: 255/127/H176 mm -Weight: 6 kg

Three-phase motor, electric motor -Power: 1.8 kW -Speed: 1700 rpm -Shaft: Ø 18 x 40 mm -Construction: B3 -Dimensions: 290/270/H190 mm -Weight: 14.2 kg

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 920 rpm -Shaft: Ø 14 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 230/177/H138 mm -Weight: 7 kg

Gear motor, electric motor, electric gear motor -Speed: 110 rpm -Power: 0.25 kW -Diameter: Ø 15 mm -Construction: B3 angle -Protection class: IP 33 -Number: 1x motors available -Price: per piece -Dimensions: 290/160/H175 mm -Weight: 7.5 kg

Gear motor, electric motor, electric gear motor -Speed: 42 rpm -Power: 0.25 kW -Construction: B3 angle -Diameter shaft: 20 mm -Protection class: IP 33 -Brake: 220 volts -Number: 1x motors available -Price: per piece -Dimensions: 165/160/H315 mm -Weight: 8.8 kg

Gear motor, electric motor, three-phase motor -Speed: 24/210 rpm -Power: 0.04/0.55 kW -Construction: B3 -Diameter shaft: 24 mm -Protection class: IP 44 -Brake: 220 V -Fan motor: 380 V -Dimensions: 675/200/H210 mm -Weight: 31 kg

Gear motor, electric motor, electric gear motor -Motor power: 0.25 kW -Speed range: 3.25 rpm -Construction: B3 angle -Drive shaft: gear -Number: 1 piece motors available -Dimensions: 450/200/H360 mm -Weight: 40kg

Gear motor, electric motor -Speed: 34 rpm -Power: 0.25 kW -Construction: B3 angle -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Dimensions: 145/200/H280 mm -Weight: 8 kg

Description: Capacity: 1200 kg Platform size: 570x600 mm Approx. Onsite Dimension. (l x w x h): 1,100 x 2,050 x 520 mm, weight approx.: 75 kg

Two-roll corrugating machine - crimper, for the production of polyester staple fibers, manufactured by KELLER (USA) by order of KOBE STEEL (Japan). The width of the work rolls is 150 mm. It is equipped with a clamping pneumatic cylinder and a drive gearbox manufactured by SEISA REDUCTION GEARS with a capacity of 150 kW. Productivity is up to 50 tons / hour. Made of AISI 304 stainless steel. 4 pieces are available. The equipment was practically not used - an operating time of about 60 hours.

Rego Bread Slicer Type: Goblin Built: 2010

Seigert Köberlein N0650 Bunker belt 400 x 800 mm Conveyor belt with front hopper These so-called bunker belts form a unit of bunker and conveyor belt. The bunker belt serves as a sorting part store. It transports a compact amount of sorting parts to the hopper of the step conveyor and is driven by a three-phase geared motor. Through the integration of sensor technology, it is also possible to monitor the fill levels. A sensor in the hopper of the step conveyor or in the hopper of the hopper conveyor signals to the hopper belt whether it needs to convey further sorting parts. Specifications Manufacturer: Seigert Köberlein Application: Bunker belt Type: N0650 K&S Storage Bunker Forbo conveyor belt 400 x 800 mm Bauer Geared Motor BS04-71V/D04LA4 Mädler Roller Chain with Chain Guard Engine data Manufacturer: Bauer Application: Drive Type: BS04-71V/D04LA4 Power ...

Vibration control, control electronics KÖBERLEIN RMA-POWER-BOX 107/24/4Q ( RMA-POWER-BOX107/24/4Q ) Input: 24 V DC Output: 10...24 V DC Ersatzteil für Köberlein S 160 700 Dimensions: 140 x 180 x 70 mm

Hydraulic Horizontal Straightening Press, used Horizontal multi purpose press, used type: HHP160 max. pressing force/ max. tonnage: 160 t Year built/ year of make: 1965 Manufacturer/ make: Pellissier Hanau max. pressing force/ max. tonnage: 160 t Piston stroke/ stroke of plunger: 400 mm Piston diameter / diam. of piston: 300/ 185 mm Extension / depth of throat: 225 mm Table size/ table size: 1150 x 350 mm Pressing speed/ speed of pressing: 16 ... 6 mm / sec Advance/ advance: 75 mm / sec Return/ rapid return: 208 mm / sec Installation width between Kobendruckstück and traverse pressure pieces/ distance between plunger with ram and locators: 320 mm Distance of the pressure pieces on pistons or table / distance between locators of piston and table: 50 ... 888 mm Total power / connected power: 14 kW; 380 V We ...

K+G Wetter Angle-Grinder E 130mm, 130mm, all stainless steel, 2 speeds, sorting device, in very good condition. The machine is immediatley available and can be inspected in our facility in Koblenz, Germany.

Handtmann VF 200 Filling portioning linking MC control Loading device The machine is immediatley available and can be inspected in our facility in Koblenz, Germany.

Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping station Mfc.: REXTON – BOSCH Line parameter control panel Cases with electronic control system of the line-2 pcs. Station of preparation, drying, pressing the graphite sleeve of the crystallizer. C ...

Treif Derby III includes 4 sets of frames. The machine is immediatley available and can be inspected in our facility in Koblenz, Germany.

Treif Felix CE-100, Dicer, capacity 0, 8 t / h, 1, 0kw, very good condition. The machine is immediatley available and can be inspected in our facility in Koblenz, Germany.

Rühle PR 15 pickling injector, 15 needles, with stainless steel conveyor belt, refurbished. The machine is immediately available, and can be tested in our facility in Koblenz, Germany.

Used double-walled agitator 47 litres with agitator 0.12 KW Double-walled stainless steel container, approx. 47 litres container volume, externally heated up to 70°C with temperature control unit / water bath Haake DC 10 and circulation pump. With aluminium traverse made of profiles 45 45 mm and slow running agitator. Agitator with geared motor: Geared motor Georgii Kobold, 230 volts, 0.12 kW, n1 = 2800 rpm, n2 = approx. 20 rpm. Shaft: precision stainless steel shaft D20, length 300 mm, diameter 20 mm, Material stainless steel. Rigid clutch, bare, material stainless steel Stirring organ: Two-winged slanted blade stirrer, diameter 244mm, material stainless steel. Wings adjustable at angle Electric distribution box with 3 sockets 230V, circuit breaker and FI.

Seydelmann K 90 DC-8, 90 liters bowl cutter, all stainless steel, variable knife speed, 2 bowl speeds, variable mixing speeds forwards and reverse, knife shaft brake electrically operated, noise reduction cover, loading device, unloader, in very good condition. The machine is immediatley available and can be tested in our facility in Koblenz, Germany.

Maja SA 400, ice machine, capacity: 400 kg in 24 hours, refurbished. The machine is immediately available, and can be tested in Koblenz, Germany.

Seydelmann AU 200-B, 200 mm automatic grinder, all stainless steel, hopper capacity approx. 400 litres, 2 working worm speeds, 3 feeding worm Speeds, refurbished. The machine is immediately available, and can be tested in our facility in Koblenz, Germany.

Handtmann VF 80 vacuum filling machine, filling, portioning, linking. The machine is currently in the refurbishing and will be available soon. It can be tested in Koblenz, Germany.

Qty. 1 Second-hand steel strip production plant Mfc.: NKK, SMS, Bricmont, Siemens, Woo Jin Inc., Kum Soo Ind., Yong Woon Heavy Ind., Affival, Chun Yang, Sumitomo Heavy Ind., Primetals, Toshiba, Sungmyung Eng., Kiheung, Hyundai Steel, Dosan, Kobe, Yaskaawa, IMS, ABB Built: 1995 – 2018 Production plant weight: approx. 50,000 T Slab dimensions: 55 mm x 900~1,560 mm x 20,000~43,000 mm - T x W x L Strip dimensions: 1.4~16 mm x 900~1,560 mm – Coil weight: 28 ton Scope of supply: EAF A EAF B Ladle Furnace Continuous Caster Soaking Pit Descaler Hot Rolling Mill Cooling Unit Coiler Skin Pass Mill Equalizer EAF A Built: 1995 – 2005 Stopped in 2011 EAF B Built: 1995 – 2005 Stopped in 2020 Caster & Rolling Mill Built: 1995 -2005 Stopped in 2020 Capacity (slab) 1.8 MT /annum (A & B combined) Slab dimensions: 55 x 900-1,560 x 20,000-43,000 mm T x W x L  ...

Ruhle Tumbler MKR 130, with vacuum, scraping arm, container size 130 liters, LED control, direct cooling by strong cooling unit, mixing and kneading, all stainless steel. The machine is currently in the refurbishing and will be available soon. It can be tested in Koblenz, Germany.

Maja Skinny, derinder, with in feed belt, cutting width 434 mm, manual and automatic operation. The machine is immediately available and can be tested in Koblenz, Germany.

Handtmann VF 50 vacuum filling machine for filling, portioning, linking, MC-control, filling capacity up to 2,600 kg/h, pressure up to 55 bar, 420 port./min, portioning from 5-100.000 g., with linking device. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Poly Clip SCD 7095 pneumatically operated single-clipper for all artificial and natural casings, bags and nets. The machine is immediately available and can be tested in Koblenz, Germany.