Albe to continuously clean/ filter the oil in your fryer. ...

• more information

Kosme Used Complete Bottling Line for Juice and Milk 2006 If you are looking for a complete bottling line for your dairy or juice products look no further than the Kosme Used Complete Bottling Line for Milk 2006 This high quality bottling line was previously used by Kosme to bottle milk in 2006 and features state of the art equipment from leading manufacturers like Kosme Krones and Mariani It can also be used to bottle edible oil in PET with neck 38 this is because the filling system is by weight and therefore allows you to have this possibility At the filler output there is a weight control system which guarantees the correctness of the filling The Kosme Used Complete Bottling Line for Milk ...

General SKU258N223 LocationBarneveld MakeKoenig AG TypeKW14 No.3560 Year of construction2007 Material Shell materialStainless steel Tube materialStainless steel Pressure Working pressure shell20 Bar Working pressure tubes0.1 Bar Main Features Shell (Material)Mild steel Tube (Material)Mild steel Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Tube capacity2024 Ltr Max. temperature300 Degr.C, air Shell capacity2360 Ltr Max. temperature220 gr.C. water Information Floorspace2,2x1,7 M Total height2,2 M Weight4500 KGShell and tube heat exchangersKoenigHeat exchangers > Shell and tube heat exchangersBrand > Koenig What you can expect ...

General SKU249P361 LocationBarneveld MakeKooiman Groep No.70.608 Year of construction1990 Pressure Working pressure shell4 Bar Working pressure tubes5 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface179 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 (316L) Heat exchangercheck Horizontalcheck Notified bodycheck Heating surface179 m2 Tube capacity1280 Ltr Number of tubes:1188 Tube diameterdia.18mm Tube length2730mm Wall thickness tubes1.2mm Max. temperature100 degr.C. Shell capacity1370 Ltr Shell diameter912mm Shell length+/- 3400mm Wall thickness shell6mm Max. temperature100 degr.C. Sh ...

General SKU408S978 LocationBarneveld MakeKoruma Maschinenbau GmbH (D) TypeDisho In-Line 0/100 No.5389 Year of construction1995 Main Features MaterialStainless steel Motor5.5 KW Inlet diameter32 mm Rotor100 mm Specified Features - Inline mixer Continuous reactorIn Line Dispersing and Homogenising Rotor sizesdia. 100 InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Rotor speed2885 rpm With vesselcheck Capacity40 ltr. Vessel sizesdia. 390x400mm with stirrer 0,55 kW 230/400 Volt 309-1539 rpm Inline high shear mixers InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Speed2885 rpm With propellor stirrercheck Motor0,55 kW 230/400 V ...

New drill motor 230V - Part No. TB02752  ...

• more information

Korean made trapeze line 3 form sliding cassette system ( 27/200-30/151-18/838 ) cassette change in 5 minutes 3 types of cases are available 27/200 - 38/151 - 18/838 change takes only 5 minutes the cassette roller is all chrome 15 ton hydraulic uncoiler rollformer line flying shear Stacking unit is a fully automatic machine

Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump, oil in-line pump -Manufacturer: Kopa, OIL central lubrication pump oil inlet pump from lathe DMT CD320 -Type: 010 Single Line Delta -Container contents: l -Flow rate: l/min / bar -Dimensions: 210/135/H275 mm -Weight: 6 kg

Cat.-Nr. 11-3315 in a very good condition for Cosmetic and Food Stuff Pressure Tanks with Agitator: Total Capacity: 13.320 Litres – capacity for use: 10.000 Litres Manufacturer: Schwarz Year of Construction: 1999 Material: dished bottom and jacket: 1.4539 flange for agitator, spout and cup sleeve for temperature sensor: 1.4539 other Stutzen: 1.4571 insulating jacket and pipe legs: 1.4301 (V2A) Attachments: 1.4404/1.4571 Seals: Viton Operating Instructions available For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Ch ...

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!