OEC Medical System Compact 7600 with: Tube Nagel & Goller EP-F-190 0.6/1.5 Image amplifier 23 cm LIH (Last Image Hold) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not ...

Galaxy R Gamma Camera  ...

• more information

Dr. Junghans Medical hot water bottles 7,300 pieces, each with a volume of 0.6 litres, with or without cover - new in original packaging - are offered as follows: 1) 1,600 hot water bottles 0.6 litres, without cover, REF 10128, LOT 43946 2) 2,900 hot water bottles 0.6 litres, with cover red, REF 12128, LOT 43946 3) 2,800 hot water bottles 0.6 litres, with cover blue, REF 13128, LOT 43946 The hot water bottles come from an overstock at our customer. Single item sales from 1000 pieces would be possible by arrangement. The hot water bottles are still in our customer's factory near Leipzig (Saxony). The sale is carried out ex works EXW (loading possibility available). If the sh ...

St. Jude Medical Kidney Ablation, EnligHTN, RF ABLATION Generator ENL-GEN2 You will receive a VAT invoice.  ...

• more information

Technical details material.: OPS, APET, PP, HIPS, ABS Forming area (VxH): 520 x 400 mms Depth of draw: 120 mms of material thickness (max.): 1.50 mms of technical details heating, moulding and cutting. This machine has the BFS system which allows to cut in place in the forming station Forming area: 520 x 400 mms of Max sheet width: 590 mms No of cycles are very much depending on the product. However we have been producing more different products with up 50 cycles by minute, but they were no deeper than 40 mms. All movements are 140 mms with a recommended max. depth/hight of 120 mms We have been producing OPS, APET, PP, HIPS and ABS on the machine. The read few years mainly HIPS and APET The  ...

Thermoforming Machine Brand: Kiefel, model: 76/225F. It shapes and cuts by vacuum pieces from rolls of PPE that are previously heated in the oven. Everything goes online, fully automatic and includes all empty aurxiliars, refrigeration, mold change trolleys, etc. Forming area: 760x2250 mm max, workpiece height: 220 mm pos. max, 30 mm neg. max, upper cutting force: 30 KN, lower cutting force: 30 KN, sheet line: 1575 mm, vacuum: 500 m 3/h, cycle time: ca. 20 sec (material dependence), glue type: butyl or hot melt glue, glue application speed: mx. 400 mm/sec (depending on the contour and type of glue), applicator head control: amount of glue depending on speed, tool change time: less 5 min, m ...

Drive power: 110kW, with reversing Film Take-Off Kirion T 1300, Monoblow Head Kirion 120/300-1, further accessories and documentation. ...

• more information

Connected load: 104kVA, operational hours counter: 18,775h, the chain of the chain rail system was replaced in 2018. ...

• more information

DESCRIPTION KIEFEL Model: KL 1 SH 52 BFS + KVH 83 Preheating Model type Nr.34.322-08.35, Identity.Nr. 100-035, Tp-No. 157/93 Year of construction - 1993 Forming Area: 540x420mm Film Width: 570mm Foil thickness: min 0.2mm - max.3mm Depth of draw positive / negative : 140mm / 140mm Materials: PET, PVC, PP, PS, HIPS Condition - in use, in production Location: Bucharest, Romania, 050192 Other details: - Number of stations : 5 - Preheating, Forming, cutting in mold, punching, stocking. Preheating for PP foil, model KVH 83, 2050/2200 / 2550mm, Length 2950mm, Width 1400mm, Weight 700Kg, max 150 Celsius degrees - the documentation  ...

Automatic Roll-Fed Kiefel KMV 50D machine Year: 2002 Maximum forming area: 500 x 350 mm Minimum forming area: 300 x 100 mm Max tool dimensions: 516 x 366 mm Forming height above - below Material: 120/40 mm Suitable materials: PS, OPS, EPS, PP, PE, PVC, APET, CPET, RPET Maximum sheet width: 545 mm A / B stacker Pressures Max. Max. 2.5 bar Cycles / min: 35 Approx. Length: 10,300mm Approx width: 2100 mm Approx.Height: 2200mm Weight: 6700 kg Machine in production