Hydr. Hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Masch. No. 115 106 1212 / 72783 Year of construction 1986 Saw area - round 250 mm Saw area - square 225 x 225 mm Saw area - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mm Motor power 1.4 and 1.8 kW pole switchable Mains connection 380 Volt, 50 Hz - only for 90 cuts, no miter adjustment- Saw motor with 2 speeds and 3 V-belt steps - Hydraulic saw bracket feeding - Hydraulic cutting pressure adjustment via throttle valve - Rapid traverse for saw bracket lower - manually via handwheel height-adjustable material support table with mm scale - manual material tension - Coolant device  ...

Cutting range at 90° round: 250 mm Cutting range at 90° flat: 260 x 100 mm Saw blade dimensions: length 400 mm Lifting speeds: 6 electr. Power supply: 380 V, 1.4/1.6 kW Dimensions: 1470 x 700 x 1720 mm Weight: 610 kg  ...

• more information

Machine type: hydr. Hacksaw Make: KASTO Germany Type: WBS 150 / 170 Machine No. No. 116 004 1203 /54407 Saw blade length: 300 x 32 x 2.0 mm Stroke cut pressure: hydr. selectable via adjustable wheel Cutting range at 90 Round: 150 mm Cutting area max. 150 x170 mm Cutting speed: approx. 12-24 m /min Cutting range at 90 flat: 170 x 150 mm Miter cut: adjustable up to 45 Cutting range at 45 Round: 100 mm Cutting area at 45 Flat: 100 mm Cutting range at 60 round: Cutting area at 60 flat: Vice clamping: 155 mm Working height: 700 mm Power transmission: stable gear ratio Saw motor: Bauknecht 380 Volt 50 Hz 0.55/0.75 KW 1390/2780 rpm Total power requirement: 1, KW  ...

Hydraulic. Parallel cut hacksaw machine make KASTO type WBS 150/170Machine -No: 122 041 120369320 Year 1985Technical specifications:Cutting area round: 150 mmsquare: 150 x 150 mmrectangle: 150 x 170 mmin miter at 45 °: 100 mmSaw blade dimensions: 300 x 30 x 1.5 mm (bore 8.5)Working height: 695 mm2 stroke rates: 75/80 H / minDrive motor: 380 V, 0.75 kWDimensions: 800 x 800 x 1350 mmWeight approx. 170 kgColor: blue / whiteWith- Coolant device- Material vertical stress- Stepless oil-hydraulic cutting pressure control with lifting in idle stroke- Depth of cut can be determined by depth limit switch- rotating machine headused, in good conditionPrice on request.Delivery: ex warehouse or location  ...

There are three metal band saws available, connected load: 1.1kW, weight: 170kg. ...

• more information

Connected load: 0.9kW, weight: 170kg, including instruction manual, three saw blades for V2A and five saw blades for steel, the lowering hydraulics should be overhauled. ...

• more information

Overhauled: 2018 Year of construction: 1985-2017 Saw band 275-315 mm Engine power 11.0 KW Cutting speed 225-1200 m / min Square maximum working range: 15-80 mm Round maximum working range: 15-90 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 5500mm x 1400mm x 1600mm The machine is suitable facilities and construction for mass editing of non-ferrous metals and is the predecessor of KASTOwa M9 KASTOspeed M9. The saw line is currently in preliminary line status and can be visited only in original condi ...

Overhauled: 2018 Year of construction: 1991-20167 Band saw blade 250-285 mm Motor output 5.5 KW Cutting speed 35-160 m / min Square maximum working range: 15-60 mm Round maximum working range: 15-70 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max. 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 7500mm x 1400mm x 1600mm The machine is suitable due to their facilities and construction for mass editing of steel and is the predecessor of KASTOwa C7 or C9 KASTOspeed. The plant will be located after overhaul (retrofit) in like new condition, which is  ...

Technical data: -Cutting capacity 90 ° round 420 mm square 420 x 420 mm -Band saw blade dimensions 6300 x 41 x 1,3 mm -Cutting speed infinitely adjustable 0 x 130 m / min -hydr. Lifting - lowering of the column-guided saw frame - cut pressure infinitely adjustable 0-10 m / min -Hydr. movable work piece vise -biggest opening of Vice 480 mm -maximum passage height under the blade 480 mm -Material height approx. 700 mm -Total power 400 V / 8 kW -Hydr. Bundle clamping device -Coolant system -MOT. Spaeneraumbuerste -MOT. Chip conveyor - MOT feed roller 2000 mm -Space requirement approx. B 2200 x H 2500 / 2800 X 3200 mm -Weight approx. 3200 kg

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 400 mm Square: 400 x 400 mm Execution: Horizontal hydraulic Cut length: min.: 6 mm max: 750 mm Max. automatic forward feed length: 750 mm Cutting speed: stepless from: 20 m/min up to: 110 m/min Band length: 5090 mm Band width: 34 mm Sheet thickness: 1.1 mm Vice pressure max.: 20 - 60 bar Voltage 50 Hz 3x: 400 Volt Power: 8 kW Machine´s weight about: 2150 kg Overall dimensions machine: Length: 2420 mm Width: 2240 mm Height: 1915 mm Various accessories: Automatic forward feed Coolant system: 100 ...