We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Control: KASTO Max.cutting range: 530 x 630 mm Cutting speed: 12 ? 120 m/min Saw band dimension: 7675 x 54 x 1.3 mm Automated bar shift: No Coolant tank:185l Chip conveyor: YES Made in Germany ...
This KASTO tec A3 Sawing machine was manufactured in the year 2000 in Germany. It is a fully automatic band saw machine. It is equipped with a feed roller conveyor (non-driven) which has 3 side feed rollers. ...
Technical data: -Cutting capacity 90 ° round 420 mm square 420 x 420 mm -Band saw blade dimensions 6300 x 41 x 1,3 mm -Cutting speed infinitely adjustable 0 x 130 m / min -hydr. Lifting - lowering of the column-guided saw frame - cut pressure infinitely adjustable 0-10 m / min -Hydr. movable work piece vise -biggest opening of Vice 480 mm -maximum passage height under the blade 480 mm -Material height approx. 700 mm -Total power 400 V / 8 kW -Hydr. Bundle clamping device -Coolant system -MOT. Spaeneraumbuerste -MOT. Chip conveyor - MOT feed roller 2000 mm -Space requirement approx. B 2200 x H 2500 / 2800 X 3200 mm -Weight approx. 3200 kg
cutting diameter: 320 mm saw band length: 4670 mm cutting width: 580 mm total power requirement: 7,4 kW weight of the machine ca.: 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features: Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. ...
full automatic with chipconveyor cap round: 420 mm cap square: 420 x 420 mm cap rectangle: 420 x 420 mm Depth of throat: 420 mm Max height of workpiece: 420 mm Table travel : Manual (1) -- hydraulic (2): hydraulic (600 mm) Sawspeed: 17 > 120 m/min Length of band saw: 6300 x 41 x 1,3 mm Power needed: 8 kW Length : 2450 mm Depth : 3050 mm Height: 2230 mm Weight: 3400 kg
The column saw is designed to cut metals from aluminum and its castings, through non-ferrous metals, to high-quality metals such as stainless steel. The saw has a stable structure and reliable technology for automatic material feeding and cutting, which only takes place at an angle of 90°. The saw is also equipped with a cooling system, which is responsible for cooling, lubrication and protection against corrosion of tools and cut elements. The main materials cut on a frame saw are profiles, shafts, pipes, rods, angles, C-sections, T-sections and other shapes. Producer: KASTO Model HBA-420 Cutting area approximately 420 mm Square cutting surface 420x420 mm Material feeding with aut ...
With documentation, without accessories or documentation, has been regularly serviced, an on-site inspection is possible, video is available. ...
Cutting dimensions: 400x260mm, connected load: 2.2kW, length: 2500mm, width: 1000mm, height: 1500mm, weight: 1.8t, including set-up tools and documentation, on-site inspection is possible. ...
Fully hydraulic high-performance band saw in the heaviest design, with horizontal parallel movable saw blade, for cutting profiles, tubes and solid material in all Qualities, including material that is extremely difficult to machine (e.g. Titan, Inconel, Hastelloy) Guidance of the sawing unit via two vertical square columns with hardened and ground guide rails. Hydraulic band saw clamping and hydraulically pre-tensioned Carbide band saw guides. The material is clamped by two hydraulic clamping vices. The feed length can be adjusted by means of a counter with a resolution of 0.1 mm. The material is fed via a hydraulic cylinder and ensures maximum cutting accuracy. The machine is ...
cutting diameter: 420 mm saw band length: 6300 mm table height: 700 mm 0: 5,5 kW cutting speed: 20-130 m/min min. cut-off length: 6 mm min. dia.: 10 mm weight of the machine ca.: 2,9 t dimensions of the machine ca.: 2,4x3,3x2,4 m Fully automatic band saw, saw band tension hydraulic, cutting feed continuously variable, material feed hydraulic, automatic feed with horizontal vice. Clamping force: approx. 400-2000 daN Coolant supply via three coolant nozzles, approx. 135 l, approx. 30 l/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.