workpiece length: 6300 mm swing dia.: 800 mm clamping length: 6300 mm grinding diameter: 800 mm grinding length: 1660-6300 mm grinding wheel dia. x width: 1500 x 150 x 650 mm grinding spindle speed: 250 - 500 U/min work piece spindle speed: 0,1-10 / 1 - 15 U/min table - swivable +/-: ° table speeds: m/min max. workpiece weight between centres: 5000 kg grinding motor: 18,5 / 22 kW control: FANUC 31i A5 clamping diameter: 200 - 600 mm diameter of main spindle: 280 mm tailstock quill diameter: 240 mm tailstock adjustment: 90 mm feed in x - axis: 0,01 - 10000 mm/min feed range Z-direction: 1 - 6000 mm/min z-axis: 7750 mm x-axis: 650 mm bed width: 2300 mm bed track: 4 total power requirement: kW ...

grinding diameter: 1400 mm grinding length: 11030 mm swing diameter: mm grinding diameter - min.: mm grinding spindle speed: 300 - 1000 U/min drive motor: 30/37 kW feed: x-axis: 0.01 - 1000 mm/min z-axis: 1 - 4400 mm Control: FANUC 31i x-axis: 510 mm z-axis: 11250 mm diameter / bore of grinding wheel: 760x100 / 915x100 mm workpiece weight: 45 t workpiece turning speeds: 2 - 40 U/min centre distance: 15000 mm total power requirement: 150 kVA weight of the machine ca.: 85 t dimensions of the machine ca.: 19 x 5,3 m CNC roll grinding machine - CNC control FANUC 31i-A - crowning - magnetic separator - Coolant - Grinding wheels/flange - 2 steady rests - Tailstock The data for this ad was creat ...

GEAR HOBBING MACHINE MAKE: KARATS MODEL: GH-20H YEAR: 1984 Specification : Table dia. : 2000mm (Bore dia.: 300mm) Max. dia. : 3000/4300mm (HOB/SINGLE) Max.Module: M30/35 (HOB/SINGLE) Max.dia of hob: 380mm Max.Length of hob: 510mm Machine size: 7000 x 4100 x 4300 (L x W x H) Weight: Approx 45Ton

KARATS DH-30 CNC Deep Hole Borer Manufactured year 2017 Main specification ● Height from Bed sliding to center of Chuck 2,900 mm ● Swing over bed 5,800 mm ● Drilling capacity 56~650 mm dia ● Distance between center 25,500 mm ● Max. working length 24,000 mm ● Max. workpiece load capacity (with 2 Steady rest ) 380 tons ● Max. workpiece clamping dia 3,400 mm Bed ● Total length of Bed 53,850 mm ● Width of Bed 2,500 mm ● Height of Bed 700 mm Headstock ● Spindle shaft dia 800 mm ● Spindle rotating speed 160 rpm ● Chuck size 2,500 mm ● The clamping dia on Chuck 600 ~1,600 mm ( Design 480~1,680 mm ) Boring head ( A-axis) ...

Te Koop: Stainless steel butterfly valve Handbediend. 6 "las las karambir zonder."  ...

• more information

oven 650 Injection Mould Mold furnace temperature range 10 - 650 Celsius 1x1x1m (various possible) Kammertrockenöfen Kammertrockn er Öfen Ölofen Pulverbeschichtungstrockner Pulvereinbrennöfen Schachtöfen Schlichtetrockner Sinteröfen Sonderofen Sondertrockner Temperöfen Tro ckenöfen Trockn er Trockneranlagen Vorwärmofen Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen temperaturi te polaganim hlanenjem. Na ovoj povišenoj temperaturi u materijalu nastaju plastične deformacije te se unutarnja naprezanja izjednačuju. Nitriranje je postupak sličan je cemetiranju, gdje se površina dovodi u kontakt sa strujom dušika koji se veže sa ...

Coextrusion Blow film line 3 layers CMG 55/75/55LHE – SW 2200 TA Year of production 2018 1. Extruder A – Single screw extruder 5530/LHE - Screw diameter 55 mm - L/D ratio 30/1 - Extruder drive – 66 kW AC - Nominal output in LDPE MFI 1.0 130 kg/h - Lever type screen changer 2. Extruder B – Single screw extruder 7530/LHE - Screw diameter 75 mm - L/D ratio 30/1 - Extruder drive – 118 kW AC - Nominal output in LDPE MFI 1.0 275 kg/h - Lever type screen changer 3. Extruder C – Single screw extruder 5530/LHE - Screw diameter 55 mm - L/D ratio 30/1 - Extruder drive – 66 kW AC - Nominal output in LDPE MFI 1.0 130 kg/h - Lever type screen changer 4. 3-Layer Bl ...

Diamond core drilling machine -Drill stand -Vacuum pump -Water pump tank -Core drill: Ø 15/20/3x 25/3x 28/32/40 mm ...

• more information