130,790 used machines on RESALE, but how to find them? Machine Search
Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 390 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 330 , Generator Hz: 50 , Generator Volts: 230/400 , Generator Amps: 476 , Generator Tank Capacity: 600 Liter(s), Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/olympian-geh330-generator-330- kva-used/635, , = More information =, , Empty weight: 6.285 kg, Type number: GEH330 GENERATOR 330 KVA
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 342 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 1330 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 850 , Generator Hz: 60 , Generator Volts: 600 , Generator Amps: 117 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/caterpillar-3512-24z-8n-5806-g enerator-850-kva-used/304, , = More information =, , Empty weight: 10.800 kg, Type number: 3512 24Z 8N-5806 Generator 850 K
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: White , Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 46 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 42.5 , Generator Hz: 50 , Generator Volts: 400/230 , Generator Amps: 61 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/caterpillar-3054na-generator-4 25-kva-used/687, , = More information =, , Empty weight: 1.350 kg, Dimensions (LxW): 150 x 100 cm, Type number: 3054NA GENERATOR 42.5 KVA
Engine Brand: KUBOTA, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 12 Volt , Rated Power: 35 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/kubota-v2403-t-new/42309, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 220 kg, Type number: V2403-T
We offer you the following machine. - Manufacturer: Kubota - Type: ST A-35 - Power: 26 kW - Weight: 2030 kg - Year of construction: 2003 - Mileage: approx. 3880 bH - PTO shaft front and rear - Service, oil change New - Accessories: Sliding blade can be purchased separately
Laservall 3,5 KW KUBO 100 EVO KE100E0109 Bouwjaar: 2009 Mitsubishi Control Microscoop voor het repareren/lassen van kleine onderdelen
Key data: 4350 mm, 1250 mm, 1200 mm
FIDIA K 211 – 5-axle CNC machining center for complex shapes in tool and mold making. Equipped with a simultaneous 5-axis twist milling head (A-Y-C) The FIDIA C20 CNC control system ensures fast data processing, precise path guidance and reliable process control. With a spindle speed of up to 24,000 rpm, the machine is optimally designed for high-speed milling and fine surface quality.
Key data: 2650 mm, 1250 mm, 1200 mm
FIDIA K 211 – 5-axle CNC machining center for complex shapes in tool and mold making. Equipped with a simultaneous 5-axis twist milling head (A-Y-C) The FIDIA C20 CNC control system ensures fast data processing, precise path guidance and reliable process control. With a spindle speed of up to 24,000 rpm, the machine is optimally designed for high-speed milling and fine surface quality.
Inv. Num. : 3901 Type: COMBI-U7 Producer: KIHEUNG Created: 2016 Parameters: Control system: HEIDENHAIN TNC 620 Switch-on hours: 2590 h Hours: 2389 h Work table length: 1800 mm Work table width: 700 mm Maximum table load (uniform): 3000 kg Number of axes: 3 pieces Tool magazine: 24 pieces Maximum vertical spindle speed: 4000 1/min X-axis travel: 1600 mm Y-axis travel: 750 mm Z-axis travel: 900 mm Cone: ISO 50 Motor power: 20/30 kW Working feed: 10000 mm/s Number of T-slots in the table: 5 pieces Machine weight: 13 t Equipment: Swivel head (90°) Swivel head cycles through the program 90 degrees horizontally or vertically to the left or right
Used bread roll line KÖNIG, type: G2000 with Mini Rex Futura -In bakery condition- Compact bread roll line - Mini Rex Futura-S head machine - Can also be rotated to look only round and take off directly - Proofing time approx. 6 minutes at maximum output - With side discharge belt single-row - With tools for emperors - Condition: good, everything checked - Machine is still being cleaned The roll line is in good condition and is ready for immediate use. Viewing and test run are possible at any time by arrangement.
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 851; Engine: Caterpillar C3.3; Accessories: Tanker, Battery, Control Panel, Stahldach, Caterpillar DE33GC Generator Set specifically designed for stand-by duty.; Water Tank Volume [l]: 50
- Noise Rating: 67.2 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / EU Tier IV final; Power [PS]: 337; Gross weight [kg]: 4784; Engine: Cat C9.3B; Accessories: Tanker, Battery, Control Panel, Stahldach, - Built-in switch 50/60 Hz, - Sockets: 2x16A, 2x 32A, 1x 63A, 1x125A; Water Tank Volume [l]: 667
- Noise Rating: 65 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Power [PS]: 22; Gross weight [kg]: 815; Engine: Cat C2.2; Accessories: Tanker, Battery, Control Panel, Stahldach, - Sockets: 2x16A, 2x 32A, , - Option for 24H tank as in 2nd picture.; Water Tank Volume [l]: 56
- Noise Rating: 64.6 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Power [PS]: 218; Gross weight [kg]: 4487; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, - Built-in switch 50/60 Hz, - Sockets: 2x16A, 2x 32A, 1x 63A, 1x 125A; Water Tank Volume [l]: 822
- Noise Rating: 65.9 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Power [PS]: 125; Gross weight [kg]: 2527; Engine: Cat 4.4; Accessories: Tanker, Battery, Control Panel, Stahldach, - Built-in switch 50/60 Hz, - Sockets: 2x16A, 2x 32A, 1x 63A; Water Tank Volume [l]: 518
grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Photo of machine already delivered in similar scope: -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5 Micro-adjustment for the standard workhead Dressing device ...
grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.The machine will be delivered overhauled. Mechanical overhaul: • Overhaul of the entire machine according to Kellenberger measuring protocol • A new service-friendly cabin • Repainting Electrical overhaul: • New, modern CNC cylindrical grinding machine control system • New built up control cabinet • New drive technology • Exchange of all electric lines, Berus pressure switch, etc. • New absolute glas scales in X- and Z- axis • New absolute rotary encoder (for B-axis) Please remark ...
screw ø:: 70 mm screw length:: 22D screw speedl:: -- U/min Condition: used Specification: rubber extruder line – used COLMEC Extruder, Hot Air Channel, Cooling Bath Consisting of: Extruder COLMEC 70 x 22D - Screw diameter: 70 mm - Screw length approx.: 22D - Extruder motor power: 37 kW - Cooling unit for extruder Hot air oven: - Hot air oven power: 80 kW - Fan power: 2x 0.36 kW, 2x 1.5 kW - Stainless steel cooling bath The system is in good condition and was still in operation until approx. 6 months ago - Sold as seen. The buyer is responsible for safety regulations. Without CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ID3681 MTU 685 KVA Electric generator year/Year of construction 1989 500 hours only! 5.3 t 685 KVA Electric generator, very good condition 685 KVA Power Generator, Very Good Condition
KSB Submersible Motor Pump UPA 150S-12 Pump, 1.5 kW KSB Submersible Motor Pump UPA 150S-12 Pump, 1.5 kW the pump is apparently new. But has traces of storage. The cable was probably eaten by mice (see pictures) The second picture belongs to a pump in its original packaging, which I offer in another offer. More items - new and used - can be found in our shop! International shipping costs on request!
used weigher Kemper Imperator, overhauled, with 1 chamber, with lubrication, for small and large weights, hopper for approx. 200 kg dough, hourly output up to 1,500 pieces / h, weight range 200 to 2,300 g
max. wheel diameter: 300 mm max. module: 8 min. module: 0,7 Control: SINUMERIK 840 D min/max. pitch cone angle: - 90 / + 90 ° workpiece spindle - bore: 127 mm grinding wheel diameter: 50 - 230 mm spindle speeds (infinitely variable): 7.500 U/min work piece spindle speed: 700 U/min total power requirement: 146 kW weight of the machine ca.: 21 t dimensions of the machine ca.: 9,5 x 3,6 x 3,1 m Measuring probefor tooth gap(integrated on the grinding head) External grinding spindle cooling system ELBARON oil mist extraction (integrated in the machine) Hoffmann coolant filter system Was used for the serial production of spiral-toothed ring gears No clamping devices No grinding wheels / grinding wheel flanges No dressing wheels The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 210 mm band length: 400 mm capacity 90 degrees: square: 190 mm capacity 90 degrees: flat: 240 x 190 mm cutting speed: 16/32 m/min total power requirement: 1,1 kW weight of the machine ca.: 180 Kg dimensions: 1,2 x 0,8 x 80,8 m Hydraulic hacksaw with: - Coolant device - good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of Make: 2004 Clamping force: 60to (588kN) Working hours: 48,930 h Accumulation head - BFKS 6.3 Climbing Unit Max Opening: 1,450 mm Column passage: 900x1200 mm
Kettle vat for Kemper ECO125AE spiral mixer - Vat boiler for Kemper spiral mixer - Type: ECO125AE - Boiler made entirely of stainless steel - Shell diameter inside approx.: 92cm - Kettle height inside approx.: 52.5cm - 4 pieces of boilers available in stock
A self-built powder welding machine with a power source Kennametal and an MTA cooler for applying Stellite to valves is available. 1) Cooler MTA TAE EVO 10M, year of construction: 2013, cooling capacity: approx. 3kW, refrigerant: R407, filling quantity: 0.8kg, max. operating pressure: 28bar, flow rate: approx. 0.59m³/h. Machine dimensions X/Y/Z: approx. 600mm/600mm/800mm, weight: approx. 100kg. 2) Power source Kennametal Stellite PTA Junior Star, year of construction: 2013, open circuit voltage: 75V, welding current range: 10A/10V-250A/38V, protection class I. Documentation available. An on-site inspection is possible.
A total of three Ferromatik injection molding machines are available. 1) Ferromatik K155, clamping force: 1550kN, max. platen distance: approx. 950mm, min. mold height: 300mm, max. opening stroke: 650mm, tie bar distance: 500mm/500mm, platen dimensions X/Y: 750mm/750mm, weight: approx. 8000kg. The machine has a leakage in the area of the hydraulic cylinders for the aggregate movement. 2) Ferromatik K200, clamping force: 2000kN, platen dimensions X/Y: 830mm/830mm, tie bar distance: 560mm/560mm, opening stroke: 650mm, daylight: 1000mm, min. mold height: 350mm. Machine dimensions X/Y/Z: approx. 7300mm/1800mm/2300mm, weight: approx. 10000kg. 3) Ferromatik K275, clamping force: 2750kN, min. mold height: 350mm, tie bar distance: 630mm/630mm. Machine dimensions X/Y: 8000mm/2300mm, weight: 13600kg. The machines are sold without handling. Documentation vorhanden. An on-site inspection is possible ...
A mint-condition 2-axis precision lathe Knuth is available. Turning diameter over bed/support/without bridge: 800mm/570mm/1035mm, max. workpiece length: 1500mm, bed width: 400mm, travel X/Y: 420mm/230mm, top slide swivel range: 70°, speed: 1600rpm, spindle bore: 105mm, rapid traverse X/Z: 2m/4m/min, quill diameter: 90mm, quill stroke: 235mm. Machine dimensions X/Y/Z: approx. 3250mm/1150mm/1950mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible.
Offered is a rubber injection moulding machine of the company Klöckner DESMA, stroke volume 1600cm³, clamping force 2500kN, injection pressure 2078bar, machine weight approx. 11000kg. A visit on site is possible by arrangement.
Center height: 230mm, center width: 1500mm, swing diameter over bed/cross slide: 475mm/260mm, max. workpiece weight: approx. 500kg, spindle diameter: 1000mm, spindle bore: 62.5mm, max. chuck diameter: 250mm, travel X/Z: 1330mm/280mm, rapid traverse X/Z: 8m/4m/min, speed: 3150rpm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1600mm, weight: approx. 3300kg, control: Bosch CC 200T. Documentation vorhanden. An inspection on site is possible.
A case unscrewer/case uncorker Rink is available. Unscrewing heads: 4, uncorking heads: 2, container configuration: 20x0.5l NRW. Machine dimensions X/Y/Z: approx. 2900mm/1300mm/2000mm, control system: Siemens Simatic S7. Documentation available. An on-site inspection is possible.
An external cylindrical grinding machine Kellenberger is available. Distance between centers: 1000mm, center height: 175mm, max. workpiece diameter: 250mm, travel X/Z: 1000mm/220mm, grinding wheel diameter: 500mm, speed: 1530rpm. Machine dimensions X/Y/Z: approx. 3000mm/1850mm/1750mm, weight: approx. 3150kg. A viewing on site is possible.
The brand manufacturer COBRA-SOR ceased its activities in 2019 We have products for the following brands: VW, Mercedes, Ford, Nissan, Madzda, Mitsubishi, Opel, Renault, Fiat, Skoda, Toyota, Hyundai, Chevrolet, Citroen, Honda, Isuzu, Jeep, Kia, Audi, Peugeot, Seat Under abc s : / / thor-automotive . en/ you will find all the articles that our sister company has posted. We are currently making another precise, up-to-date inventory. List price for all together was € 1.3+ million net. The export price at that time was about € 650,000 We imagine € 250,000 FCA 21614 Buxtehude (thus approx. 19% of the retail list price) We would charge an additional €33,000 net for the 269 shelf crates/foldable tire pallets in which the goods are currently stored. You can receive a ready-to-use merchandise management system based on "Odoo V16 Enterprise" from us free of charge. All p ...
Central oil and grease lubrication system, MFE5-BW30 + KFG1-5W2 Vogel, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Central oil and grease lubrication system consists of: 1) Central lubrication (oil) MFE5-BW30-S7+299, Vogel 30L, 0.5L/min., max. 27bar 2) 2 piston pump units (grease lubrication) KFG1-5W2-M+924, 24V DC, Used! The part was purchased from a certified company's spare parts warehouse, is in good condition and fully functional. We have tested the system's pumps: Oil pump test: it delivers immediately. Test of the 2 grease lubrication piston pumps: The agitator starts immediately and grease delivery begins. If you are interested, we would be happy to show you the test on video. The system can be viewed, tested and collected from us at any time. The level sensor on the oil tank may be faulty, which has been tak ...
A Kjellberg plasma cutting system is available. Plasma source: Kjellberg HiFocus 160i, max. material thickness: 40mm, track width: approx. 3100mm, gantry dimensions X/Y: 2000mm/2000mm, runway height: 500mm, working dimensions X/Y: 2000mm/12000mm. The machine was expanded with inkjet in the year 2015. Including suction and filter. The control was renewed in the year 2021. Documentation available. An inspection on site is possible.
Central oil and grease lubrication system, MFE5-BW30 + KFG1-5W2 Vogel, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Central oil and grease lubrication system consists of: 1) Central lubrication (oil) MFE5-BW30-SZ, Vogel 30L, 0.5L/min., max. 20bar 2) 2 piston pump units (grease lubrication) KFG1-5W2-M+924, 24V DC, Used! The part was purchased from a certified company's spare parts warehouse, is in good condition and fully functional. We have tested the system's pumps: Oil pump test: it delivers immediately. Test of the 2 grease lubrication piston pumps: The agitator starts immediately and grease delivery begins. If you are interested, we would be happy to show you the test on video. The system can be viewed, tested and collected from us at any time. The level sensor on the oil tank may be faulty, which has been taken i ...
A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible.
An eccentric press / punching press year approx. 1992 is offered. Viewing is possible by arrangement.
Offered is an incomplete returnable glass filling and packaging line consisting of the following machines and units: Unloader: Kettner, crate washer: Bohrer, insert screens, 1x zone, 2 inverters, unpacker: Kettner Blitzpac A35 T1 year 2002, unscrewer: Adelski, cleaning machine: Krones Einend KESK year 1994, approx. 19.303h, EBI inspection machine: Heuft Spectrum Inline IR year approx. 2015, filler: Cobert, 60 filling stations, approx. 15,000 bottles/h at 1.0l, 1 pc. SV 10-digit, 2 pcs. KK 10-digit, twist-off capper: SWC year 2008, cooler: NIKO 091 26-110-100 year 2015, temperature control: approx. 85°C - 30°C, labelling machine: Krones Prontomatic K090-A43, body, front and back labelling, dating: Markem Image, loader: Kettner Bojok, Born Binder. Processable containers/formats: bottles 0.2l/30-case, 0.25l (RW), 0.5l/24-case, 0.7l juice bottle, 0.75l (EW), 1l VdF/6-case/12-case, crates/f ...
Offered is a Kocher + Beck rotary die cutter/rotary die cutting technology. SKK: scale front stop 5, scale on cylinder 9, 10bar, Mini B (pressure downward): scale front stop 11, scale on cylinder 5, 20bar, Memobox carton: scale front stop 3, scale on cylinder 11, 40bar, Memobox insert: scale front stop 5, scale on cylinder 5 & 2mm, 10bar. Inspection by appointment possible.
Brüel & Kjaer Integrated Sound Level Meter Type 2239 A Item Condition: Used Last calibration: 07/2020 More interfaces - new and used - can be found in our shop! International shipping costs on request!
Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Rectangle: 200 x 80 or 150 x 70 mm mitred at 45° rectangular/flat: 150 x 70 mm Portrait: 100 x 60 mm 2 cutting speeds by pole-switchable motor: 19 and 28 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Drive motor: 380 V, 1.7/2.6 kW Weight: approx. 850 kg Space requirement: 1200 x 1100 x 1620 mm
MSB Division Cable Trolley 6-speed Holder for 20 rolls Net weight 600 kg Platform 180 x 130 cm Height 155 cm Roll diameter approx. 63 cm Bj 2011 Shipping via forwarding agent possible, please contact us. More items - new and used - can be found in our shop! International shipping costs on request!
Key data: 150 KW, 188 kVA, 240 V
Kohler Marine Generator sets. Model: 150EF0ZD Spec: GM55364-GA36 Condition: New Qty: 8 Power: 150 kW / 188 kVA Speed: 1500 RPM Voltage: 240/416 Frequency: 50 Hz Fuel: Diesel
A CNC gantry plasma and flame cutting machine is available. Working dimensions X/Y: 6500mm/2500mm, power source: Kjellberg, max. number of torches: 3, control: Heidenhain TNC 355. An on-site inspection is possible.
grinding length: 1000 mm centre height: 180 mm length: 3600 mm width: 1650 mm height: 1800 mm weight of the machine ca.: 3,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 1500 mm centre height: 180 mm weight of the machine ca.: 3,9 t dimensions of the machine ca.: L: 4900 x 1650x 1800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new motherboard with Part Number 503-00286A or Visible Number 637-00173A-A
maximum number of results exceeded
please refine your search
