jointer used for sale

jointer planer, dresser, flat planer, planer, jointer -Manufacturer: SCM surface planer type F4L -Working width: 400 mm -Number of knives: 4 pieces -Chip removal: 0 - 10 mm -Motor: 3 kW -Planer knife speed: 5500 rpm -Table: 2605 x 400 mm -Dimensions: 870/2605/H980 mm -Weight: 695kg

Surface Planing Machine Make SAC Type FS 430 HP 4Machine -No: 102g.05.84 Year 1984Dressing width: 430 mmKnife of the four-knife shaft: 430 x 35 x 3.0 mmMax. Rebate depth: 20 mmTable length: 2900 mmBag table length: 1550 mmDelivery table length: 1310 mmTable width: 430 mmDiameter of the knife shaft: 120 mmSpeed of the knife shaft: 4500 rpm.Table height: 800 mmDressing stop: 1300 x 160 mmStop angle: 0 - 45 °Drive power: 4.0 hpWeight approx: 745 kgOutside dimensions approx: 2900 x 700 x 960 mmlittle usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Max working width: 400 mm

Dowel wreaths for dowel cut-out and chamfing machine solver type AA 220 available for the following dowel diameters: Ø 5mm = 3 pieces Ø 6mm = 6 pieces Ø 8mm = 6 pieces Ø 10mm = 6 pieces Ø 11mm = 3 pieces Ø 12mm = 4 pieces Total 28 pieces. Especially for the wreaths for 6 and 8 mm dowels, special designs are included, for dowels 6x20 or 8x25.

Surface planing machine make ALDINGER type HA 63Machine no .: KS 18/43117 built in 1960Planing width: 630 mmTable size: 2500 x 630 mmOutside dimensions: 2500 x 1200 x 900 mmused, from an operational resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Surface planer make SCHMIDTechnical specifications:Planing width: 260 mmTable size: 830 x 260 mmPower connection: 380 V / 50 HzDimensions approx: 850 x 450 x 900 mmWeight approx: 100 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Planer for round bars solver with magazine Type: VF 120 Year of construction: 1987 max. workpiece thickness 120 mm with 2 planer heads and 2 knives each (4 knives in total) in the machine and 2 spare planer heads and 2 knives each (4 knives in total) for round bars in 8 mm Feed speed 5-25 m/min. incl. slide-in magazine solver suitable for the production of dowel rods, round and profile rods

WEINIG Hydromat H23 LINE, S/N 89533 Package chain conveyor with 5 chains approx. 2,700 x 4,800 mm WEINIG infeed transverse transport HighMech E-1, with 7 flat chains approx. 2000 x 4200 mm WEINIG Hydraulic Roller Accelerator 814 Short infeed table with heavy 4-roller feeder WEINIG Outlet HighMech A-5 Pull-out hinge approx. 2,000 mm x 250 mm Transverse transport with 7-fold cam chain 4,200 mm Transfer to 7-fold flat belt transport Scissor lift with driven chain support Automatic planer with reinforced KASCHWIG soundproof booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed infinitely variable 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 15.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle top 15.0 KW • 5th spindle bottom 11.0 KW • 6th spindle t ...

WEINIG Hydromat H23 LINE, S/N 89533 Package chain conveyor with 5 chains approx. 2,700 x 4,800 mm WEINIG infeed transverse transport HighMech E-1, with 7 flat chains approx. 2000 x 4200 mm WEINIG Hydraulic Roller Accelerator 814 Short infeed table with heavy 4-roller feeder WEINIG Outlet HighMech A-5 Pull-out hinge approx. 2,000 mm x 250 mm Transverse transport with 7-fold cam chain 4,200 mm Transfer to 7-fold flat belt transport Scissor lift with driven chain support Automatic planer with reinforced KASCHWIG soundproof booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed infinitely variable 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 15.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle top 15.0 KW • 5th spindle bottom 11.0 KW • 6th spindle t ...

Planing and molding machine Weinig Hydromat 30 N for four-sided planing and profiling of large (wet) wood and Beams with high feed and including planing heads for the horizontal spindles., spindles: 4, spindle 1: Bottom / 10 kW / counter bearing / jointer, spindle 2: Right / 10 kW, spindle 3: Left / 10 kW, spindle 4: Top / 10 kW / counter bearing / jointer, working width: 300 mm, working height: 200 mm, table: Solid chrome plated and air cushion, Control: ATS system

Weinig Unimat 30 EL four-sided planer - German production - year of production 2001 - for wet wood - pneumatic cushion - counter reading 4808 h - DTR TECHNICAL PARAMETERS: - planing width 300 mm - planing height 200 mm - spindle diameter 50 mm 1 lower spindle 11 kW 2 right spindle 11 kW 3 left spindle 11 kW 4 upper spindle 11 kW cutter adjustable at an angle of 0.75 kW 5 lower spindle 15 kW 6 upper spindle 11 kW - jointer 7 lower spindle 7.5 kW - jointer - spindles with brakes - feed motor 7.5 kW - feed speed smoothly adjustable 6-36 m/min - four pull rollers in the tabletop - six upper steel pulling rollers - three upper rubber pulling rollers - feed on cardan shafts - pneumatic pressure - air cushion in the countertop - automatic central lubrication - minimum element length 700 mm - diameter of connectors 5 x 160 mm, 2 x 140 mm, 1 x 80 mm Machine di ...

Heavy Hochleistungshobelmaschione type Waco 6,000 with 8 spindles. Feed speed 75 m/min up to 600 m / min. Spindles: U/O/RE/LI/U/O/O/U Working height: 17 mm to 120 mm. Max-width 50 mm up to 350 mm. All spindles with Jointer. Machine with feeder table (accelerator) and cross conveyor. Complete switchgear including FU's. Including soundproof cabin! RONDAMAT and washing machine for planing heads. 1 set of tools.

- Hobelbreite 50 - 400 mm - Hobelhöhe 10 - 300 mm - stufenloser Vorschub 5-25 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - 6 Spindeln - untere Welle min. / max. Werkzeug FI 160 /180 mm - rechte Welle min. / max. Werkzeug FI 160 /230 mm - linke Welle min. / max. Werkzeug FI 160 /230 mm - obere Welle min. / max. Werkzeug FI 160 /230 mm - 2. obere Welle min. / max. Werkzeug FI 160 /230 mm - untere Welle min. / max. Werkzeug FI 160 /230 mm -max. Sägeblattdurchmesser 2. obere Welle 300 mm Motorleistung: 1. unten 15,0 kW 2. rechte 11,0 kW 3. linke 11,0 kW 4. oben 15,0 kW 5. oben 15,0 kW 6. unten 15,0 kW - Motor Vorschub 11,0 kW - Motor Höhenverstellung 1,5 kW - Gesamtanschluss 94,5 kW - Jointer obere Wellen und unter Welle - horizontale Wellen mit Gegenlager / Hydrospannung - obere Welle elektrisch verstellbar mit Vorschubsystem mit Digitaler Anzeige - linke Welle elektrisch verstellb ...

BOTTENE – PASMEC moulding line for beads and planks, composed as follows: Automatic loader PASMEC, year 2005 : - PLC for work cycle programming - arm with suction cup system and vacuum pump - 1600mm useful stroke, brushless motor and prismatic guides - side aligners + pneumatic introducer pusher BOTTENE TARGET 606 moulder with 6 shafts, year 2017: – useful working measures 230x150mm – gimbal towing and differentiated pneumatic pressure – variable feed speed 6 – 60 mt/min with inverter – feed motor KW 7,5 – HP 10 – top feed wheel before the 1st shaft – group of tandem feed wheels in front of the 2nd shaft – overlapping feed wheels (top + bottom in the plane): at machine entrance, before the 1st shaft between the 4th and 5th tree at machine output, after the 6th shaft – short 1200mm entry plane – lubrication pump – protection cabin � ...

Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package

Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package

High-performance planing and molding machine Weinig Hydromat 23 for four-sided planing and profiling Including tool set and EM 11 loading magazine., working width: 230 mm, working height: 160 mm, spindles: 6, spindle 1: Below (11 kW / 6,000 rpm), spindle 2: Right (7.5 kW / 8,000 rpm), spindle 3: Left (7.5 kW / 8,000 rpm), spindle 4: Above ( 11 kW / 6,000 rpm), spindle 5: Below (7.5 kW / 6,000 rpm), spindle 6: Above (7.5 kW / 6,000 rpm), feed: 60 m / min, control: ATS system, table rollers: 3 powered, Jointer at spindle: 1/4/5/6, Counter bearing at spindle: 5 / 6, delivery time: On demand, Available from: December 2023

Manufacturer: Weinig , Type: Unimat 30 EL, Year: 1999, Control: Siemens, Planing widht mm: 300, Planing hight mm: 120, Number of spindles: 6, Elektronische Achsverstellung: no, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 120, Saw unit kW: no, Table rollers: no, Rotations of spindles max. rpm: 6000, Spindle arrangement: U/R/L/R/O/U, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 5,5, Feeding speed min-max m/min: 5-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, Jointer Stück: no, 1.Bottom spindle kW: 7,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4th spindle on right kW: 5,5, 5.Top spindle kW: 7,5, 5th spindle at bottom kW: 7,5, Noise enclosure: Kabine, FREE TEXT: inkl.3 Hebebühnen und und eine Apstapelanlage/, Year :1999

Hydraulic fine planing machine Weinig Uniplan 23 for two-sided surface finishing, as an alternative to grinding (e.g. in window construction) with high-performance spindles. • Very good original condition., spindle: 2, working width: 230 mm, working height: 120 mm, spindle 1: Below / 7.5 kW, spindle 2: Above / 7.5 kW, feed: 3 kW // max. 36 m/min, Spindle speed: 7,200 rpm, jointer: Yes, Counter bearing: Yes, short parts package: Yes

Key data: 5 , 300 mm, 200 mm

Spindle arrangement: scoring saw at the bottom - planing shaft at the bottom - top - right - left Diameter of spindles: 40-X-X-50-50 Spindle Speed: 5400 Counter bearings: 2-3 Jointer: 2-3 Engine powers: 15-45-55-22-18,5 Adjustment of the working width: digital Adjustment of the working height: digital Feed speed : 50 - 200 Feed motor: 45 KW Feed: Cardan Horizontal tool head D205 Vertical tool head D160xH100 Z12 Table height constant approx. 1000mm Diameter of suction nozzles 200-250-160-160-120 Weight 13000 kg

Capacity: 230 x 130 mm. Spindles: 7 Bottom 7,5 kW, right 7,5 kW, left 11 kW, right 7,5 kW, top 11 kW, bottom 11 kW, universal 11kW spindles 2, 3, 4 and 5 are 8000 tr/min straight jointer on 2nd bottom spindle Cardan shaft drive Pneumatic pressures Intermediate driven feedroller for short pieces 0,8 m infeed straightening table manual bed lubrication Spindle diameter: 50 mm. 5 driven rollers in table Feed: 6 - 36 m/min, motor 7,5 kW motor height adjustment

Manufacturer: Weinig , Type: Unimat 3000 Brilliant, Year: 2002, Control: Weinig LogoCom, Planing widht mm: 20-230, Planing hight mm: 10-160, Number of spindles: 9, Elektronische Achsverstellung: yes, Wellendrehzahl: 4000-12000 regelbar, Fast exchange device: HSK 63, Setting up program shafts: yes, Saw unit kW: no, Table rollers: yes, Tool exchange places: no, Elektronische Anzeige : yes, Rotations of spindles max. rpm: 12000, Spindle arrangement: unten/rechts/links/rechts/oben/unten/oben/unten, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 7,5, Feeding speed min-max m/min: 10-36, Feeding speed continous adjustable: yes, Table length: kurz, Pneumatical top pressure: yes, Adjustment - electonically: yes, Jointer Stück: yes, 1.Bottom spindle kW: 7,5 KW/12000 U/min, 2nd spindle on right kW: 7,5/12000 U/min, 3.Left spindle kW: 11/<CRLF>4000-12000mi ...

Weinig Hydromat H22N four-side planer - German production -DTR - year of production 1992 - two rollers in the tabletop, milled before the first head - for wet wood TECHNICAL PARAMETERS: - planing width 220 mm - planing height 140 mm - Spindle diameter 50 mm 1 lower head 7.5 kW 2 legal head 7.5 kW 3 left head 11 kW 4 upper head 7.5 kW 5 lower head 11 kW hydraulic feed pump motor power 15 kW feed speed smoothly adjustable up to 60 m/min Feed on cardan shafts electric height adjustment pneumatic pressure five pulling rollers in the countertop eight steel upper pulling rollers One Upper Rubber Pulling Roller rests on horizontal spindles jointer on the lower spindles Transport dimensions 500x200x160 cm weight 4 tons

– German production –DTR – for wet wood – hydrohebel TECHNICAL PARAMETERS: planing width 230 mm planing height 160 mm rollers in the countertop pulling spindle diameter 1-4 - 40 mm spindle diameter 5-6 - 50 mm 1 bottom spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 7.5 kW 5 bottom spindle 7.5 kW 6 upper spindle 7.5 kW feed motor power 4 kW feed adjustable smoothly on the inverter 5-26 m/min jointers on the last two heads five upper steel pulling rollers four top rollers rubber pulling four rollers in the countertop pulling pneumatic pressure feed on cardan shafts electric brakes electric height adjustment length of the pre-worktop 1950 mm connection diameter 140 mm dimensions of the machine (L/W/H) 685 / 230 / 230 cm weight 4000 kg

CATALOG NO. 6946 TECHNICAL SPECIFICATIONS - max width of the workpiece 210mm - max thickness of the workpiece 120mm - number of spindles 2 pcs - spindle diameter 50mm in advance: - 3 insertion, pulling, rubber, smooth shafts including 2 double - 2 leading, rubber, pulling shafts including 1 double - heads on supports - head adjustment up / down - electric height adjustment of the upper head - electrical setting of planing thickness - spindles equipped with a brake - main motor 2×5,5kW - smooth regulation of feed speed - feed motor 3kW - feed on cardan shafts - diameter of extraction connection 2x160mm - dimensions length / width / height 2350x1780x1950mm - weight 1882kg – German production – jointers – for sharpening knives on the head – 2 Hydro heads included – unpainted – very good condition, used planer Net price: 33900 PLN Net price: 7533 ...