jet shaft used for sale

complete system from 4Jet to the edge deletion of thin film Solarzellengehoert originally, to the 2 sputtering equipment offered by us by Lakkoju H3200Randentschichtung • non-contact procedure without damage to the substrate, no micro-cracks • dry process with no grit, no chemicals, wenigerEntsorgungsvolumen, eco-friendly • effective decoating of TCO, semiconductors undRueckkontakten - 1000V-Test > 10 GOhm • no additional cleaning necessary • reproducible results • optional laser cleaning of the cut edges! • discharge layering zones can be flexible - Glastoleranzangepasst • all metal front or rear contacts (MO , Al, AG) • all major semiconductor (a-Si single junction/tandem junction, CIS, CIGS, CdTe) • all TCO layers (ITO, ZnO, SnO2) MEX molybdenum  ...

X-travel: 1200mm, y-travel: 800mm, z-travel: 700mm, max. load: 1.5t, rotational speed: 1-14,000/min, operational hours counter controls/ machine/ spindle: 41,351/ 133,865/ 60,163h.

Solid spiral drum with 4-way HM reversible plates no adjustment during tool changes necessary Planing width 310 mm Dual fold of the dressing tables Grated dressing table made of grey cast iron Engine power: 230/400V 4.7 PS 3.5 kW Clearance height: 3-225 mm Weight: 240 kg Special price net 2250,-

JPT-260 Planer - Thicknesser Planing width: 256 mm Drum: 3 - Strip cutter Engine power: 230V/400V 2650 W Thickness forward: 3-225 mm Feed speed: 5,5 m / min. Weight 170 kg G & JET-10000289T

The CE10 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE10-200 50Hz 200 bar 21 l/min. CE10-200 60Hz 200 bar 25 l/min. General Specifications: ----- Power of the drive motor: 7.5 kW (50Hz) / 9 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

The CE15 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-170 50Hz 170 bar 40 l/min. CE15-200 50Hz 200 bar 36 l/min. CE15-200 60Hz 200 bar 30 l/min. CE15-300 50Hz 300 bar 18 l/min. CE15-300 60Hz 300 bar 22 l/min. General Specifications: ----- Drive motor power: 11.2 kW (50Hz) / 13 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Includes standard accessories.

The CE20 belongs to the series of our electrically operated high-pressure machines with a pressure of 200 to 500 bar and a volume flow of 16 to 45 l/min. The standard version has hard rubber tyres with a parking brake at the rear and swivel castors at the front. The "Slim version" has a narrower design and also has narrower rear wheels with a parking brake. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The standard model has a dimension of 1060 x 760 mm. The "Slim" version has a very compact dimension of 1060 x 500 mm. Both versions are 850 mm high. The standard and slim versions are identical in all other specifications. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- CE20-200 50Hz 200 bar 38 l/min. CE20-200 60Hz 170 bar 45 l/min.  ...

The CE40 belongs to the series of our high-pressure machines with an electric drive for a pressure of 100 to 2000 bar and a volume flow of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal moldings and circumferential stainless steel side frames. The front wheel and the two large rear wheels including a parking brake ensure easy manoeuvring and stable stationing. A lifting eyelet facilitates transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 CE40-1380-12 CE40-2000-9 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 30 kW (50Hz) / 33 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 57A (50Hz) - 57A ...

The CE100 series is an electrically driven high-pressure machine for a pressure of 300 to 2000 bar and a volume flow of 21 to 135 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE100-300-135 CE100-500-80 CE100-1000-42 CE100-1400-28 CE100-2050-21 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 75 kW (50Hz) / 90 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 1800 mm x 1050 mm x 1400 mm Weight: 2000 kg Includes standard accessories.

The CE125 series is an electrically driven high-pressure machine for a pressure of 200 to 2500 bar and a volume flow of 21 to 240 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE125-200-240 CE125-1500-35 CE125-2500-21 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 90 kW (50Hz) / 90 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 2150 mm x 1385 mm x 1750 mm Weight: 2000 kg Includes standard accessories.

The CE150 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 60 Hz and others see data sheet and on request. General Specifications: ----- Drive motor power: 90 kW (50Hz) / 110 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.

The CE200 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 25 to 350 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others on request. General Specifications: ----- Power of the drive motor: 150 kW (50Hz) / 150 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.

The CP22 belongs to the series of gasoline-powered high-pressure machines with a pressure of 170 to 500 bar and a volume flow of 16 to 46 l/min. The machine has pneumatic tyres with a parking brake on the rear axle and swivel castors on the front axle. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The machine measures 1060 x 760 mm and is 850 mm high. The Honda engine is equipped with electric starter. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CP22-170 170 bar 46 Lpm CP22-220 220 bar 36 Lpm CP22-280 280 bar 27 Lpm CP22-350 350 bar 23 Lpm CP22-500 500 bar 16 Lpm General Specifications: ----- Drive motor: 2 Cylinder 4 Stroke Petrol Engine, Electric Start Power of the drive motor: 16.4 kW Spee ...

The machines of the CD25 series are compact high-pressure cleaners from 170 to 500 bar and a volume flow of 17 to 42 l/min. The pump is powered by a 3-cylinder, water-cooled Kubota diesel engine. The sturdy frame is made of stainless steel for long durability and corrosion resistance. The powder coating ensures the very beautiful appearance. The machine has very compact dimensions of 1200mm x 800mm. This corresponds to the same size as the well-known EURO pallet. The frame is fixed on 4 large rubber feet. The high-pressure machine is also equipped with forklift pockets and a central lifting eyelet. This allows for very easy transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD25-170 170 bar 42 Lpm CD25-250 250 bar 32 Lpm CD25-350 350 bar 23 Lpm CD25-400 400 bar 21 Lpm CD25-500 500  ...

The CD50 series of our high-pressure machines covers a pressure of 230 to 2000 bar and a volume flow of 7 to 74 l/min. The pump is powered by a water-cooled 4-cylinder Toyota diesel engine. The fully enclosed frame is made of hot-dip galvanized steel to ensure a long service life and corrosion resistance. The frame is primed and then painted. The machine only requires a footprint of 1550 x 920 mm. Under the frame 4 rubber feet are mounted. In addition, the machine has forklift pockets and lifting eyelets attached to all four corners. For the protection and storage of, for example, high-pressure hoses, a galvanized roof plate provides. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 100 ...

The CD100 series of water and water jet machines ranges from 250 to 2050 bar with pump flows from 21 to 167 l/min. The pump is powered by a water-cooled 4-cylinder turbo SISU diesel engine. The frame surrounding all frames is made of hot-dip galvanized steel to ensure long service life and corrosion resistance. It is primed and painted. The footprint of the machine is 2100 x 950 mm. The frames are equipped with rubber feet under all four corners and the machine has forklift pockets as well as hanging eyelets at all four corners. The machines have galvanized roof panels with side railings for the protection and storage of, for example, high-pressure hoses. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD100-250 250 bar 167 Lpm CD100-300 300 bar 135 Lpm CD100-500 500 bar 80 Lpm CD100-1000 1 ...

The CD160 series of our high-pressure machines covers a pressure of 200 to 2500bar and a volume flow of 25 to 300 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine with turbocharging and charge air cooling. The entire frame is made of hot-dip galvanized steel, which ensures long durability and corrosion resistance. For the beautiful look, the frame is primed and then painted. The dimensions of the machine are 2250 x 950 mm. The frame is equipped with rubber feet, forklift pockets and, at all four corners, with lifting eyelets. The machine has a galvanized roof plate with a side bracket for the protection and storage of, for example, high-pressure hoses. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD160-200 200 bar 300 Lpm CD160-250 250 bar 250 Lpm CD160-1000 1000 ...

Dry ice cleaner with only 108 operating hours and flexible use of all types of dry ice ColdJet SDI 60 Select ice blasting machine from 2013 With blasting hose, blasting gun (applicator in industrial design with lighting), grounding cable, round nozzle 11mm and flat nozzle 45mm with integrated 3-stage scambler Power supply: 230Volt maximum dry ice capacity of the container approx. 27kg Dry ice consumption adjustable from approx. 0 to 160kg per hour Jet pressure range from approx. 1.4 bar to 17 bar Compressed air requirement depends on the nozzle used The gun with integrated light and the ability to switch between only air and air + ice is very practical The device can be used with 3mm dry ice pellets, or alternatively with ice blocks, discs and nuggets, in which case the required ice is scraped off. So you can flexibly use any available dry ice. Instruction manual in English ...

The CE08 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-200 50Hz 200 bar 16 l/min. CE08-200 60Hz 200 bar 16 l/min. General Specifications: ----- Power of the drive motor: 6.0 kW Volts: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Micronizing Jetmill with K-tron screw feeder Model MC 50 machine is in good condition

This Jeti 5000 Vinyl Printing Machine was manufactured in the year 2009 in Canada. The machine has a psi of 100-150 min-max.

This Jeti 3300 Industrial Printer was manufactured in the year 2007 in Canada. The machine has a psi of 100-150 min-max.

originates from lasercutting machine

Jet JMS-8 Cross-cut saw Demonstration machine D210mm x 2,8 x D16mm 220V 1200 Watt P1 Saw blade speed of 4500 rpm. Saw blade diameter 210/16mm Swivel range of 46°/46° Index possibilities every 5° and 22.5° Saw blade swivel 0-45° Cutting depth 90°/45° 60/25mm Cutting length 90°/45° 120/80mm Weight of 9.5 kg G&JET-10000818M Special price: net 99,-€

COLD JET DRY ICE BLASTING MACHINE COLD JET MODEL 2000 DRY ICE BLASTER GOOD CONDITION EXWORKS HAMBURG GERMANY VOLTS 230 AMPS 4 PHASE 1 FREQUENCY 50/60 FULL LOAD AMPS 4 MOTOR AMPS 2.5 HP 1 SHORT CIRCUIT INTERUPTING CAPACITY 300A MAX OPERATING PRESSURE 300 PSI / 20.7 BAR SHIPPING WEIGHT 315 LB / 143 KGS

roll diameter: 375 mm; cutting width: 359 mm; cutting depht: 356 mm; table tilting: ja -5 bis + 45°; table size: 546mm x 406mm; band speed: 750 m/min; motor Power: 400V 1,5 kW; motor brake: ja / automatisch; suction connection: 100mm; machine width: 750 mm; machine length: 812 mm; machine height: 1880 mm; weight: 174 kg;

temperature: 80/130 °C 0: 100 kg filling capacity: 750 l basket dimensions: 670x480 mm number: 25 total power requirement: 43 kW weight of the machine ca.: 890 kg dimensions of the machine ca.: 185x190x150 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Jet, Type: JSS-3-6-44-800, Control: yes, Year: 2007, Filter system - negative pressure: yes, Volume flow rate m³/h: 99.900, Filter surface in m²: 800, Cleaning of scavenging air: yes, Electronic control board: yes, FREE TEXT: Breite 2950 mm Höhe 9720 mm, Year :2007

Hot runner controller - JETmulti 32 Year of construction: 2016 Location: Lodz, Poland 32 hot zones with cabling All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

Stainless steel transport container type SBP A500: Volume: 460 litres Type: Upright on pallet Design: Single-walled, mid. 2 mm wall thickness Material: 1.4301 stainless steel Container diameter: 1080 mm Total height: 740 mm Pallet: 1150 x 1200 mm Equipment: DN50 DIN11851 ball valve as outlet fitting, stainless steel dust cover with two plastic handles, galvanised transport pallet NORD compartment gear motor With frequency Power: 3kW Operating speed: 134/min Voltage: 400 V Frequency: 50 Hz

Tank Agitator, IBC Mixer, Liquid Filtration, Inotec, Visco Jet, Used Machine Manufacturer: Inotec, Visco Jet Type: VJ350.030ex Year: 2003 Dimensions: 1100 x 900 mm Material: Stainless steel Tank Mixer: For IBC tanks with a 150 mm opening Special VISCO JET® "Tornado" mixing element with an effective diameter of 650 mm Stainless steel crossbar with lifting brackets or aluminum crossbar Available with a 1.5 kW power drive Individual speed control for every mixing task VISCO JET® mixing element for low, medium, and high viscosity media

JPT-410 Dressing thickness planer 410mm Planer width:410mm Planer Shaft:3-Strip Knife Shaft Motor power: 400V 4 KW Passage height: 3-225mm G&JET-10000295T

Power: 1.35kW; Speed range: 230 â€" 3100 rpm; RPMs: 9; Spindle mount: MK-2; Drilling stroke: 85 mm; Spindle projection: 140 - 540 mm; Table size: Table size: 500 x 740 mm / 250 kg loadable; Head tilt: 90 left / 45 right; Column diameter: 80 mm; Quick-release chucks: 1 - 16 mm; Weight: 240 kg; Jet Radial drilling machine JRD 387 A-T - 400 V stable radial drilling machine from the Profi-Line with integrated base cabinet and height-adjustable, swivelling and sliding drill head for the trade radial drilling machine Jet JRD 387 A-T - Profi-Line with machine base and adjustable drill head ProMAC drilling machines with 13 mm to 40 mm drilling capacity ensure steady and precise drilling work with precise positioning and depth control All machines are designed for a long service life and are equipped with a wide range of equipment - for commercial use and maintenance work 5 ...

Working width: 407 mm; Planer shaft: strip knife; Number of knives: 3; dressing table length: 1660 mm; Hollow and pointed joint adjustment: no; Dressing stop angle adjustable: yes; folding up the dressing tables: manually; maximum clearance thickness planer: 225 mm; Height adjustment thickness table: handwheel; Planer thickness indicator: Scala; Feed speed: 7 m/min; Feed roller: steel; Pull-out roller: steel; Pressure bar: continuous; Table rollers: no; Motor power: 3.7 kW; Engine braking: yes, automatic; Suction port: 100mm; Machine length: 1660 mm; Machine width: 870 mm; Weight: 315; Dual unfolding of the table for splitting in seconds Change from dressing to thickness planers, the stop does not have to be removed Planed dressing tables made of grey cast iron guarantee optimum gliding properties of the workpieces Eccentric adjustment on both sides for quick ad ...

Description: Serial number 8060539, the machine is equipped with a 3-jaw chuck with a diameter of approx. 160 mm, a 3-axis digital readout, a tailstock and a Multifix base holder Drehlänge: 750 mm, turning diameter over bed: 360 mm, turning diameter over slide: 200 mm, spindle bore: 40 mm, weight approx.: 700 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 800 x 1,600 mm

Description: Serial number: 0503004E Capacity: 22 GAx48' Max. sheet width: approx. 1220 mm (manual folding machine) weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 500 x 1,200 mm

-Knife shaft Z4 -in chrome-plated finish -D 200 mm -for machine K133 Condition good, used

Tool steel, round material, shaft section shaft, steel block, shaft sawn Material section 400 mm x length 165 mm Net weight: approx. 160 kg Material number: 1.2842 Material abbreviation: 90MnCrV8 Cold work tool steel with high hardness acceptance and good dimensional stability during hardening Application in toolmaking for cutting, punching and embossing tools. Rollers and profile rolls, measuring tools, guide strips, paper cutting knives. Delivery condition: Annealed to max. 229 HB Tensile strength as delivered: 770 N/mm2 Hardness: 790?820 C Tempering: 220?260 C Working hardness: 58-62 HRC Soft annealing: 680-720C - Medium alloy cold work steel - Oil hardener 4 pieces available, price per piece; used

- Delivers instantly dry prints on high speed flexible film and cartoning lines - Print on a wide variety of rigid and flexible substrates - Network control and image design software with CoLOS Create,Control and Enterprise - It can replace consumables without the interruption of production - Print speeds up to 208 meters/min (680 ft/min) - Easy startup / shutdown - Print height up to 25.4mm. - Message length up to 35.6 cm - Store up to 50 messages up to 8 lines of text - Barcodes: Interleaved 2 of 5, code 39, code 128, EAN 13 and UPC A. - Carton package sensors, proximity switch or pigtail cable (standard) - Backlit LCD graphics display standard Without documents

; in stock

Waterjet 2x3m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Used pumps either Knam/H2O 40HP alternative KMT/Ingersollrand SL4 30hp completely overhauled. New surcharge KMT SL5 classic 50PS/37KW 90.000,00 Construction training & service directly from the manufacturer, including

Waterjet 1x2m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Knam/H2O pump 22 HP. 65.000,00 Construction training & service directly from the manufacturer, including

; ready to use

Manufacturer: Expert Systemtechnik GmbH Make: cutEXPERT Type: Variojet Year of manufacture: 2009 Features: single table with the dimensions: length = 6500mm; Width = 3300 mm; Height = 1850mmGewicht: 1500kg Power consumption: 7,0 kW Cutting head number 2 manufacturer: AllfiType: V high SpeedHochdruckpumpe : Manufacturer: UhdeTyp: HP19/37-SBaujahr: 2009 Capacity 3, 8 l / min Design pressure: 4000 bar Motor power: 37kW Weight: 1450kg Single table, work room (cutting edge) dimensions: Length = 2200 mm; Width = 1300 mm; Height = 200 mm Special features: · Programmatically, motorized adjustment of the head distance. No tedious, manual adjustment necessary. Minimization of set-up time and avoid errors · Machine designed for high workpieces (up to 200 mm). Ideal for the cutting of foam materials. · Ergonomic software: simple and very fast creating of cutting programs, tak ...

Leading Jet mixer Manufacturer: Ystral Type: Y 11,000 L / TFW - 4 D Year of construction: 2003 Technical data: Power: 11 kW / 15 HP Revolutions: 1,465 U/min Voltage: 230 / 400 V Frequency: 50 Hz Weight: 150 kg In very good condition!

Brand Myers Model C48D50B86 ID TR87 Status Active Price 200 € + VAT Location Oradea, Romania durable construction provides long product life smooth, balanced performance and efficiency adjustable on/off pressure settings. double ball bearing design and voltage choice device Maximum capacity: 27.5 GPM (model HJ1000 in Shallow Well Setup) Voltage: 230v / 115v AC, 60 Hz Engine: Dual Compartment, 115v/230v Double Ball Bearing Motor w/ Voltage Selector Switch Download offer in PDF

Oil- steam jet pump similar to oil diffusion pump Manufacturer: Leybold - Heraeus Type: OB 8000B Condition: used, removed from running plant!

Produkbezeichnung, industrial ink-jet printers Manufacturer: Metronic Model: Alpha Jet Year of construction: 1998 Additional information: see also bite photo Information without guarantee

Technische Daten: - 4 Spaene-Tonnen mit Klemmbuegel - Reststaubgehalt 0,1 mg/m3 - Ein- / Ausschalter - Volumenstromueberwachung - Druckdifferenzanzeige - Leistungsaufnahme 5,5 kW - Netzspannung 400 V / 50 Hz /3 Ph ~ - Stromaufnahme 32 A - Filterflaeche 23,5 m2 - 60 Stück Filterschläuche - Filterregeneration automatisch, pneumatisch JET-System - Volumen-Staubtonnen 4 x 70 l ges. 280 Liter - Ansaugstutzen 250 mm - Volumenstrom Nominal 5400 m3/h - Volumenstrom Minimum 3500 m3/h - Unterdruck 2800 Pa - max. Schalldruckpegel 72 dB (A) - Transport Abmessungen L= 3480 mm, B= 1.100 mm, H= 2.500 mm - Gewicht: 900 kg

Technische Daten: - 6 Spaene-Tonnen mit Klemmbuegel - Reststaubgehalt 0,1 mg/m3 - Ein- / Ausschalter - Volumenstromueberwachung - Druckdifferenzanzeige - Leistungsaufnahme 7,5 kW - Netzspannung 400 V / 50 Hz /3 Ph ~ - Stromaufnahme 32 A - Filterflaeche 35,32 m2 - 90 Stück Filterschläuche - Filterregeneration automatisch, pneumatisch JET-System - Volumen-Staubtonnen 6 x 70 l ges. 420 Liter - Ansaugstutzen 300 mm (rechts) - Volumenstrom Nominal 6000 m3/h - Volumenstrom Minimum 5100 m3/h - Unterdruck 3.400 Pa - max. Schalldruckpegel 72 dB (A) - Transport Abmessungen L= 4350 mm, B= 1.100 mm, H= 2.500 mm - Gewicht: 1000 kg