jesmaq used for sale

Center height: 180 mm Center distance: 750 mm Spindle bore: 42 mm JESSEY - STUDTURN 1440 Universal lathe Ø 360 x 750 mm MACH - ID 6364 Make: JESSEY Type: STUDTURN 1440 YOP: 2004 Swing over bed Ø    360 mm Swing over cross slide Ø      215 mm Swing in the gap Ø      560 mm DBC Turning Length   750 mm Gap length      150 mm Spindle bore   42 mm Spindle power       3,75 kW Bed width      250 mm Tailstock spindle Ø       50 Ø Stroke pinole    120 mm Spindle taper     3 Mk Speeds / ranges      2000 Rpm Length    1.830 mm Width        915 mm Height     1.524 mm Weight     1.000  ...

System: dosing pump Manufacturer: Jesco Prod.-No.: 37142 Type: CC 10/40 Year: 05/2003 IP: 55 KW: 0.05 Rpm: 1440 Hz.: 50

Jesco Jaguar Ø 840 x 4100 mm CNC Swing over bed: 840 mm Swing over cross-slide: 560 mm Distance centre tot centre: 4100 mm Dia of spindle bore: 105 mm Command: Fagor 8060FL Length: 6500 mm Width: 2100 mm Height: 2000 mm Toolchanger: yes Number of tools: 8 positions

HAMMERMILL JESMA OPTI-700 – 60 Cv – 1,500 RPM The machine is located in Spain.

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 30 i Supply voltage 1 x 230 volts Setting range 10 – 30 amps Duty cycle 35 % ED at 30 amps 60% ED at 25 amps 100% ED at 21 amps Current adjustment infinitely variable separation cut 10 mm quality cut 8 mm Cooling inverter by built-in fan Cooling burner compressed air-cooled, 50 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 480 x 165 x 290 mm Weight with burner 11 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 30 H, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 45 i Supply voltage 3 x 400 volts Adjustment range 10 – 45 amperes Duty cycle 80 % ED at 45 amps 100% ED at 40 amps Current adjustment infinitely variable separation cut 25 mm quality cut 12 mm Cooling inverter by built-in fan Cooling burner compressed air cooled at 90 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 470 x 180 x 230 mm Weight with burner 13 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 45 TT, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List price dire ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 100 i Supply voltage 3 x 400 volts Adjustment range 30 – 100 amperes Duty cycle 50 % ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable separation cut 50 mm quality cut 35 mm Cooling inverter by built-in fan Cooling burner compressed air cooled Portable assembly system version Fuse 32 Ampere Dimensions L x W x H 560 x 265 x 400 mm Weight with burner 24 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 105 RTX, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece instruction manual Warranty 24 months from date of delivery List price directly ex works 3.020,00 € + VAT Price kpl. with above accessories 2.5 ...

Jessey Jaguar 2080 Ø 510 x 2000 mm CNC Swing over bed: 510 mm Swing over cross-slide: 340 mm Distance centre tot centre: 2000 mm Spindle cone: A2-8 Dia of spindle bore: 80 mm Power on the spindle: 11 kW Number of speeds: 12 > 1800 rpm Command: Fagor Length: 4060 mm Width: 1420 mm Height: 1600 mm Weight: 4 ton

Hydr. Re-entry press, pressure line max. 50 t, table 600 x 550 mm >>

The saw is in good technical condition. Machine weight 780 kg By prior arrangement, the possibility of a tour in progress.

Flow rate: 25l/min, pressure: 12bar, with suction protection for inlays, pump suspension bracket, wall bracket for storage, a suitable control unit is available, was used for producing ice cream, was maintained regularly.

Flow rate: 50l/min, pressure: 6bar, with suction protection for inlays, pump suspension bracket, double-sided carrying handle, wall bracket for storage, on/off switch in supply line, a corresponding control unit is available, was used for producing ice cream, was maintained regularly.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 45 mm : 2,25/3,25 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 45 mm : 3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm : 240 mm : 1250 mm : 190 mm : 57 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm : 240 mm : 1000 mm : 190 mm : 57 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extraction system / briquetting press Extraction system 11 KW Briquetting press 7 KW

: 0390 mm : 240 mm : 1250 mm : 190 mm : 57 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 360 mm, 4400 mm, 430 mm

suitable for mitre cuts on one side Cutting range at 90°: approx. 360 mm; flat 430 x 360 mm Cutting range at 45°: approx. 305 mm; Cutting range at 30°: approx. 215 mm Cutting speed 12 - 115 m/min infinitely variable Infinitely variable control of the cutting speed Hydraulic material clamping Hydraulic cutting pressure regulation Chip brush Saw blade 4400 x 32 x 1.1 mm Upper dead center of the saw bar can be selected via adjustable limit switch Connected load approx. 3 kW Incl. coolant device, minimum quantity lubrication, 2 x roller conveyor each approx. 3 m, material stop, Manual, CE Conformity

: 0390 mm : 240 mm : 1250 mm : 190 mm : 57 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0560 mm : 390 mm : 1500 mm : 280 mm : 82 mm : 9,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0560 mm : 390 mm : 2000 mm : 280 mm : 82 mm : 9,5 kW spindle turning speed - stepless: 18-1800 U/min spindle taper: DIN 55029/D1-11 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0560 mm : 390 mm : 2000 mm : 280 mm : 82 mm : 9,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition. Possibility of cutting at an angle of 0 - 60° Cutting a circular cross-section max. 305 mm Cutting a rectangular cross-section max. 360x305 mm The saw is sold including a 3x2m roller track (possibility of screwing together up to a length of 6m). By prior arrangement, the possibility of a tour in progress.

Description: Band saw fully functional, possibility of testing. The saw has a new gearbox to drive the saw band, sealed hydraulics. Accessories: roller track folded 3x2m, i.e. a track with a length of max. 6 m Cutting range 430 x 360 mm. Saw band 4400 x 34 x 1.1 mm. 3 kW motor. Belt speed 12-155 m/min. Weight 1650 kg. Dimensions 2170 x 2290 x 1820 mm.

Band saw fully functional, possibility of testing. Cutting range 430 x 360 mm. Saw band 4400 x 34 x 1.1 mm. 3 kW motor. Belt speed 12-155 m/min. Weight 1650 kg. Dimensions 2,170 × 2,290 × 1,820 mm. Saw control by hand or by microcontroller. Accessories: 18 saw bands of different tooth sizes.

Stroke: 300, table 450x370, 1300kg

cutting diameter: 260 mm saw band length: . mm cutting width: . mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU074A364 LocationBarneveld MakeNiemann TypeKDV-1000 95 No.93 1885 Year of construction1993 Material Pan materialStainless steel 1.4301 (304) Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume1000 Ltr. Motor70 KW Specified Features - Dissolver Dissolver(1x) With covercheck With scraper(motor 1,5 KW Ex) Motor70,0 KW, 380/660 Volt (Ex) With variable speed drivecheck Speed mixing shaft± 270-800 Rpm With pans(2x) Capacity1000 Ltr Pan sizesdia. 1200x950mm Outletdia. 95mm With jacket(1 pan with and 1 pan without jacket) With hydraulic lifting(± 1025mm) MaterialStainless steel Information Mounted on wheelscheck With switchgear(Dim. 1,2x0,8x2,3 M) Floorspace3,0x2,0 M Total height3,1 M Weight4300 KG ATEX compatiblecheck Extra Specifications- Dissolver disc is missing - Extra information Disolwer Niema ...

General SKU295N378 LocationBarneveld MakeHenschel Industrietechnik GmbH TypeKM1750 No.4729 Year of construction2003 Pressure Working pressure0.8 Bar Main Features MaterialStainless steel Volume1750 Ltr. Motor15 KW Specified Features - Hot mixer Capacity1750 Ltr With jacket100 Ltr With motorcheck Pneumatic operated outletcheck Outletdia.200mm Cold mixercheck With lump breakercheck Motor15 KW, 400 Volt MaterialStainless steel Information Mounted on framecheck Floorspace1,5 x 1,4 M Total height1,8 M Weight2000 KG Extra information Używany mieszalnik Thyssen Henschel ()KM 1750 umożliwia mieszanie tworzyw sztucznych – zarówno na gorąco, jak i na zimno. Urządzenie jest uniwersalne, znajduje szereg zastosowań. Mieszalnik gorąco-zimny można wykorzystać do procesu powlekania, barwienia, suszenia, zwilżania, hartowania czy homogenizacji. Urządzenie przezn ...

Band saw Jespa 340/630 HAP column guided Band saw Jespa Semi-automatic Type 340/630 HAP Column-guided Built in 2009 Saw blade length 5.150mm

Automatyczna maszyna do zamykania butelek w zakresie pojemności od 250 ml do 6000 ml dla każdego rodzaju nakrętek wykonanych z aluminium lub tworzywa sztucznego. W chwili obecnej maszyna jest przystosowana do zakręcania butelek PET z popularną nakrętką 38 mm, a po dopasowaniu gwiazd do konkretnego pojemnika, maszyna może zakręcać dowolne butelki z gwintem 38 mm (popularne soki, napoje lub produkty mleczne). Po zmianie głowic zakręcających może być używana przy zakręcaniu nakrętek w dowolnych butelkach z dowolnym rodzajem gwintu. Wydajność dla mniejszych formatów wynosi: od 1000 do 9.000 but/h Maszyna posiada płynną bezstopniową regulację szybkości i wydajności. Min./max. średnica butelki: fi 30 mm / fi 150 mm Min./max. wysokość butelki: 100 mm / 360 mm Ilość głowic magnetycznych: 6 szt Rok produkcji: 2010 Moc całkowita: 3,37 kW Wymiary masz ...

Powder sieve,stainless steel,Jesma,rotating Ø 200 x L 650 mm.

Powder sieve,stainless steel,Jesma,rotating Ø 200 x L 650 mm.

Powder sieve,stainless steel,Jesma,rotating Ø 200 x L 650 mm.

Powder sieve,stainless steel,Jesma,rotating Ø 200 mm

Liquid sieve,stainless steel,Jesma type VS 20/65,standing in tiltable rack

Væskesigte,rustfrit stål,Jesma type VS 20/65 stående i kip stativ,Ø 200 x 650 mm

Pulversigte,rustfrit stål,Jesma,roterende Ø 200 x L 650 mm.

Pulversigte,rustfrit stål,Jesma,roterende Ø 200 x L 650 mm.

Pulversigte,rustfrit stål,Jesma,roterende Ø 200 x L 650 mm.

Pulversigte,rustfrit stål,Jesma,roterende Ø 200 x L 650 mm.

Oferujemy zestaw prądotwórczy w kontenerze z silnikiem DEUTZ (MWM) - TBG 616 V12K. Silnik jest całkowicie remontowane. Moc elektryczna - 450 kW Rok budowy - 2001 Godziny pracy silnika - około 63000 Bh Sterowanie - nowe ComAp Kompletny CHP może być przygotowany i dostarczony w terminie około 30 dni. Bez certyfikatu urządzenia!

Scope WTE 35 hot runner control unit – multiple unit with 5 plug-in controllers And plug-in connection cables (optional) – see pictures Tested and cleaned under control conditions (hotrunner use) – all controllers OK – as of 18.7.23 Price (without cable) € 1550.-- & VAT .- exWorks Price (with cable) € 1750,-- & VAT .- exWorks Disclaimer: Sale only to commercial customers. The device described here is a used device. A function check has currently been carried out / tested and cleaned under control conditions (hotrunner use) - all controllers OK - as of 18.7.23! The sale is made to the exclusion of any warranty, guarantee, UVV, TÜV, etc. The seller excludes any liability for material defects. Inspection of the used device is possible by appointment - please send appointment requests by e-mail to: infohausmann-gbr.de A return of the purchased device i ...

Drum pump, lever pump, hand pump JESSBERGER GmbH JP-04 Flow rate: approx. 0,0,3 l / stroke, pmax: 1 bar immersion tube length: 500 - 900 mm immersion tube diameter: max. 34 mm hose connection: 3/4 hose length: approx. 0.9 m thread adapter: G 2 New ! Dimensions: 850 x 300 x 110 mm