jenbacher type 2 used for sale

Hydr. Press brake, die bending machine HAMBURGER JONESCHEIT type HYPM 70-2600Fabr. No. 4004 Year of construction 1987Printing capacity 70 ton. Working length 2600 mmStand width 2770 mmPlunger stroke 60 mmDistance table - ram max. 390 mmTable size 2750 x 200 mmMotor power 7.5 kWWet connection 380 volts, 50 Hz.- Crimping depth via mechanical fixed stop with electric adjustment and mechanical depth indicator- Lower tool consisting of 2 segments, each 835 mm, with 2 different prisms (15 and 24 mm)- Upper tool,

L + Z Lathe WEWAG Model 250 / 1500Fabr. No. 20953 Year of construction approx. 1975Center width 1500 mmNominal turning diameter over bed 500 mmTurning diameter over bed max. 510 mmCenter height over bed 255 mmTurning diameter over support 300 mmCenter height over support 150 mmSpindle bore 56 mmSpindle speed 18 - 1800 rpm. 24 stepsRotary chuck mount short taper DIN 55022Tailstock inner taper MK 5Drive power 4 kW and 6.7 kW pole-switchable- 3-jaw lathe chuck BISON, 250 mm-

Reciprocating compressor KAESER type EPC 630-250Fabr. No. 1802334 year of construction 1992Volume flow at 6 bar 440 litres/min. Capacity max. 630 litres/min. Pressure capacity 10 barBoiler capacity 250 litersEngine power 3 kWNerg connection 400 Volt, 50 Hz (with 16 Amp. Plug)- 2 cylinders oil-lubricated- Pressure switch set to 10 bar- Runtime from 0 bar to 10 bar Shut-off pressure = 5 minSpace required L x W x H 750 x 700 x 1750 mmWeight approx. 150 kgGood condition; used

Swing-cut guillotine shears KÖLLSCHEN type BSK 2000/2Fabr. No. 69 1307 Year of construction 1969Cutting length 2000 mmCutting thickness 2 mmStand projection 90 mmWorking height 920 mmMains connection 380 volts, 50 HzEngine power 4 kW- Drive via geared motor with brake and crankshaft- mechanical sheet metal hold-down- manual back gauge 500 mm- stop adjustment via 2 handwheels, rear on the backgauge guide with measuring scale- front side stop left 720 mm- electric foot switch- manual

Tig welding machine DALEX type GL/W 201TIG welding machineMachine no.: 201 0447 Year of construction approx. 1995Power 200 Amp. 35% ED 160 Amp. 60% ED 120 Amp. 100% EDEinfinitely variable adjustment rangeType DC - DCmains connection 400 Volt, 50 Hz, 5.9 kVA, 32 Amp. Plug- 2-stroke and 4-stroke welding device- TIG hose package 8 meters- HF ignition- Shielded gas pressure reducer- Electrowelding for rod electrodes- Fan cooling- Connection socket for foot switch (without foot switch)Space requirement L x W x H 850

MIG MAG welding machine, arc welding machine EWM type MIG 230Fabr. No.: L/0340 Year of construction 1994Power 230 Amp. = 35 % ED 120 Amp. = 100 % EDEsetting range 8 stepsMains connection 400 volts, 50 Hz, 16 Amp. Plug- 2-stroke and 4-stroke welding device- Spot welding device- 2-roll wire feeder- 3 meter hose package with central connection- Welding gas pressure reducerSpace requirement L x W x H 1000 x 450 x 700 mmWeight 70 kgGood condition; used

Hydr. Hacksaw, hacksaw, lifting saw KASTO type PSB WBS 210 / 230Masch. No. 115 106 1212 / 72783 Year of construction 1986Sawing area - Round 250 mmSawing area - Square 225 x 225 mmSawing area - Rectangle 260 x 100 mmCutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mmMotor power 1.4 and 1.8 kW pole-switchableMains connection 380 volts, 50 Hz- only for 90 cuts, no mitre adjustment- Saw motor with 2 speeds and 3 V-belt steps- Hydraulic saw bar feed- hydraulic

Electric forklift JUNGHEINRICH type EFG 216Serial No. FN413671 year of construction 2011Load capacity 1600 kgLifting height 4800 mmFork length 1220 mmFork carriage width 980 mmOverall height 2120 mmOperating voltage 48 volt- Triplex mast with full free lift 1550 mm- Hydraulic sideshifter- 2 travel speeds- Battery from year of construction 2015, Type 06 EPZS C750 SC (48 Volt, 750 Ah)- Automatic charger, 48 Volt- 3-wheel solid rubber - Front tires 18 x 7-8, rear 140/55-9- according to the operating hour meter 14725 operating hours read-

Straightening and welding plate cast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmwidth 1000 mmthickness 160 mmworking height 850 mmplate thickness approx. 35 mm throughout- 3 pieces height-adjustable feetWeight with feet 680 kggood condition; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening platelength: 2000 mmwidth: 1000 mmthickness: 260 mmworking height: approx. 850 mmplate thickness: approx. 40 mm throughout- 5 pieces, height-adjustable feetWeight with feet: 1250 kggood condition; used

Brush deburring machine, tube deburring machine ERINI type 250Year of construction approx. 1995Brush diameter 250 mmBrush width 25 - 60 mmSpeed 1500 / 3000 rpm. Power 2.2 / 2.8 kWNetz connection 380 Volt, 50 Hz- Material support- new deburring brush- Suction connection 100 mmSpace requirement L x W x H 620 x 500 x 1150 mmWeight 100 kgGood condition; used

Folding machine FASTI type 2095-25-2,5Fabr. No. 94 295 004 Year of construction 1994Useful length 2540 mmmax. Sheet thickness 2.5 mmStroke of the upper beam 380 mmMotor power bending beam 2.2 kWWetz connection 400 Volt, 50 Hz- NC control FASTImatic FM100- one-piece pointed rail 135- controlled back gauge- continuous stop rail- controlled bending angle via control- electric foot switchesWeight 3000 kggood condition; used

Straightening and welded plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 2000 mmWidth 1500 mmThickness 125 mmBoard thickness approx. 40 mm continuousTable height 880 mm- Table base made of steel (self-made)Weight 1700 kgGood condition; used

Hydr. Notching machine with angle adjustment SIMASV type AV 220-6PAFabr. No. C1524 Year of construction 1996Knife length 220 mmMaterial thickness for steel 6 mmMaterial thickness for stainless steel 4 mmTable dimensions 950 x 790 mmTable height 940 mmMotor power 3 kWNet connection 400 volts, 50 Hz- Operation via tactile switch or foot switch- Adjustable notching angle from 30 to 140- Angle adjustment via 2 hand cranks for right and left- Hydraulic clamping for the adjustment blade- Electric foot switch- 2 pieces

TIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC)TIG Welding MachineFabr. No. 0507214 Year of construction 2007Power TIG 225 Amp. = 40% ED 180 Amp. = 60% ED 140 Amp. = 100% EDLight electrode 180 Amp. = 50% EDNew connection 400 Volt, 50 Hz. 16 Amp. Plug- DC welding machine- stepless power adjustment- 2 stroke and 4 stroke operation- HF ignition- Pulse welding mode- Rod electrode operating mode- Water cooled- 8 meter TIG hose package with hand torch-

Clamping plate, machine table with T-slots made of steelClamping tableClamping plate, clamping table, machine table SELF-MADEcan also be used as a straightening plate or welded plateTable surface: 2150 x 1040 mmOverall height: 200 mm- Top and bottom machined in parallel, planed surfaces- Table top L x W x H = 2150 x 1040 x 65 mm- Table top with some symmetrical holes Table top with M16 and M24 threaded holes, M16, M24, M16, M24 etc. Bore spacing in length: approx. 250 mm Bore spacing in width: approx. 255 / 165 /

Electric walking forklift, pedestrian stacker JUNGHEINRICH type EJC 14G-115-290ZTSerien. No. 80582366 year of construction 1997Nominal load capacity 1400 kgNominal lifting height 2900 mmFork length 1150 mmTotal length 2000 mmTotal width 850 mmOverall height 1900 mmOperating voltage 24 volt- Duplex mast without free lift- 5721 operating hours read- Battery from year of construction 2014, type 24 V 3PzS 345 (24Volt / 345 Ah)- Automatic charger- New TÜV test UVV (surcharge 150,-- EUR net)Weight 1050 kggood condition; used

Electric walking forklifts, pedestrian stackers JUNGHEINRICH type EJC 214 series. No. 90334640 year of construction 2009Nominal load capacity 1400 kgNominal lifting height 3200 mmFork length 1150 mmTotal length 2000 mmTotal width 810 mmOverall height 2050 mmOperating voltage 24 volt- Duplex mast with 1600 mm free stroke- 4356 operating hours read- Battery from year of construction 2009, type 3PZS 375 (24Volt/ 375 Ah)- Automatic charger Jungheinrich 24 Volt, 40 Ampere- TÜV test UVV until 11.2025Weight 1200 kggood condition; used

Electric walking forklift, low-floor pallet truck, ant, pedestrian stacker JUNGHEINRICH type EJE 22G-20-235-56 (L)Masch. No.: 80405795 year of construction 1996Nominal load capacity: 2200 kgLifting height: 200 mmFork length: 2350 mmOperating voltage: 24 VoltTotal length: 3050 mmTotal width: 690 mmHeight with drawbar: 1350 mm- Battery from year of construction 2007, Type 2 EPZS 230 (24 Volt, 230 AH)- Battery automatic charger- 8890 operating hours read. Weight approx. 560 kggood condition; used

E-chain hoist, electric chain hoist, crane KITO type WLL 240 ManuliftManufacturer: KITO Yamanashi JapanCode No. EDC 24SD Series No. 035884 Year of construction 2018Load capacity 240 kgHook travel 2 metersDistance suspension to load hook 850 mmLifting speed 3 to 12.9 m/min. mains connection 230 volts, 50 Hz- cylinder handle control with potentiometer for speed adjustment- safety- stroke limit switch- emergency stopweight 18 kgvery good condition; used

Key data: 4000 kN, 80 mm

Machine + Viper Robot 12

Mitsubishi MAF 210/150A Year: 1977 Table Size: 3000 × 3000 mm | Load Capacity: 60,000 kg Axis Travel: X: 14,000 mm | Y: 4500 mm | Z: 900 mm Spindle: Ø164 mm | 4–3460 rpm | 37/45 kW DC motor Control: ISO/EIA compatible | 5-axis interpolation | M-NUX115 DRO Accuracy: ±0.015 mm/m (X/Y), Repeatability ±0.01 mm Included Accessories: • Tool locking (5 pull studs) • Digital readout system • NC controller with startup components • Setup/leveling blocks • Maintenance toolkit • Protective covers Optional Add-ons (upon request): • Chip conveyor and coolant system • Rotary/angled fixturing • Pendant control • Bellows or floor plate systems • Special tooling packages Utilities & Installation: • Power: AC 220V (standard) • Air: 2–7 kg/cm² at 100 L/min • Installation space & foundation info on request

Bosch (Syntegon) GKF 2600 intermittent capsule filling and closing machine for the filling of powder, filling station at station no. 5 for micro-dosing (DPI or pure API), capsule body scan at station no. 3, pneumatic and contactless capsule top scan at station no. 4, integrated gravimetric random sampling inspection for statistical gross fill weight control (position 3), additional integrated gravimetric random sampling for statistical net weight control of the filled capsule (gross – tare = net), 100% net weight determination by means of NWDS (Net Weight Detection System), powder hopper with a volume of 17 litres, empty capsule hopper with a volume of 15 litres, includes format parts for capsule size 3, with the correct format parts suitable for capsule sizes 00-5, capacity up to 156,600 capsules per hour, automatic trouble shooting (ASB) with In-Process Control (IPC), electronic reco ...

a KM-200-1000 machine with removal robot built in 2006 for sale. The machine is in neat condition and serviced by Krauss Maffei.

Max. saw blade diameter: 520 mm Cutting height: 200 mm at 90°, 140 mm at 45° Cutting length: 420 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Pneumatic material tensioners Minimum quantity spraying device Powerful 5 KW motor

Brand & Model: SANDRETTO Serie NS - 230 T Reference: NS 860/2300 Condition: Very good Technical Specifications: Clamping force: 230 T / 2300 KN Tie bar spacing: 585 x 585 mm Platen dimensions: 860 x 860 mm Mold thickness (Min/Max): 210 - 630 mm Opening stroke: 580 mm Injection volume: 475 cm³ Injection pressure: 1876 bar Screw diameter: 50 mm L/D ratio: 20 Dimensions & Weight: Weight: 10 500 kg

A complete Rösler mass finishing machine is available. 1) Central mass finishing machine (centrifugal system) Rösler RotoMatic R 280/24 SE, year of construction: 2008, connected load: 18kW, weight: approx. 7500kg. 2) Rotary dryer Rösler RT 550 EURO-So., year of construction: 2008, connected load: 8.9kW, weight: approx. 1050kg. 3) Rösler R 290/4500 FB/T conveyor belt, year of manufacture: 2008, belt width: 290mm, belt length: 4900mm, connected load: 0.55kW, weight: approx. 430kg. 4) Buffer chute Rösler R 16/6/4 PR, year of construction: 2008, connected load: 4kW, weight: approx. 570kg. 5) Feeding unit Rösler BE 200 K-So., year of manufacture: 2008, connected load: 1.1kW, weight: approx. 200kg. Documentation available. On-site inspection is possible.

A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible.

turning diameter: 500 mm turning length: 1000 mm control: Mazatrol Smooth G number of spindle speeds: 5000 U/min spindle motor: 11/7,5 kW axis stroke (X,Y,Z): 450, 200, 960 mm travel -w axis: 950 mm b-axis: -30 / +210 ° c-axis: 360, 0,0001 ° bar material dia.: 65 mm milling spindle: spindle bore: 76 mm spindle turning speed range: 12000 U/min spindle motor: 7,5 / 5,5 kW tool taper: HSK A 63 rapid travel x/y/z: 40000 mm/min weight of the machine ca.: 9.5 t dimensions of the machine ca.: 3900 x 2600 x 2400 mm equipped with: - CNC control Mazak Smooth G - Main and counter spindle - milling spindle - Y-axis - Tool holder: HSK A 63 - Tool magazine: 72 places - Tool Eye - Mazak monitoring system B (RMP 60) - Coolant and compressed air (1.5 MPA) - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A right-sided Hebrock edge banding machine is available. Workpiece thickness range: 10mm-50mm, min. workpiece width: 70mm, min. workpiece length: 250mm, edge thickness (roll material): 0.5mm-5mm, max. edge height: 55mm, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 3000mm/1500mm/1300mm, weight: approx. 700kg. On-site inspection is possible.

turning length: 2500 mm control: Sinumerik 840 D spindle head: A 11 tool numbers: 48 swing diameter over bed slide: 750 mm swing over bed: 780 mm c-axis: 0,1-30 1/min diameter of quill: 160 mm taper bore: MK 5 tool length - max.: 500 mm weight of tools max.: 15 kg weight of the machine ca.: 27 t dimensions of the machine ca.: 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm) The data for this ad was crea ...

Radial drill Manufacturer: Valmer Type: TR 80/2500 SP Year of Make: 2006 Table dimensions: 1,000 x 800 x 560 mm Drilling diameter max.: 80 mm Max. tap diameter: 42 mm Max. spindle axle/column distance: 2,500 mm Max. distance between spindle axle and column: 500 mm Head movement horizontally: 2,000 mm Max. distance between spindle nose and working surface: 2,000 mm Distance between spindle nose and working surface min.: 550 mm Spindle stroke: 450 mm Morse taper: MT 6 Power: 7.5 kW Machine dimensions: 3,730 x 1,400 x 3,825 mm Weight: 11,000 kg

SANDRETTO serie 8 790/240 Clamping force : 200 T Distance between tie bar : 570 x 570 mm Platen dimensions : 860 x 860 mm Mould thickness min / max : 210 - 730 mm Opening strocke : 630 mm Injectable volume : 546 cm3 Pressure on material : 1450 bars Screw diameter : 55 mm Weight : 11 500 kg Dimensions : 7,68 x 2,35 x 1,78 m

Pressing Force max.: 2000 Kn, Withdrawal force max.: 1500 Kn, Supporting force in pressing position max.: 1200 Kn, Die return force max.: 50 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 90 mm, Withdrawal travel max.: 90 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 60 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 26,0 Kw, Width aprox.: 2350 mm, Depth aprox.: 3500 mm, Height aprox.: 5900 mm, Weight of the press aprox.: 19.900 Kg, Press housing: 260 l (gear oil), Workplace-related sound: 78 dB (A)

Reference Num.: 4206 Brand: Kodak Type: NexPress 2500 Construction year: 2017 Impressions: 22 mio Available: directly Status: Not in production Location: Deutschland

Three heating units Kleindienst are available. 1) Kleindienst 3-294, year of manufacture: 1994, heating: D, max. operating temperature: 206°C, operating pressure: 8bar–17bar, connected load: 4.9kW. 2) Kleindienst 3-174, year of manufacture: 1992, heating: D, max. operating temperature: 206°C, operating pressure: 8bar–17bar. 3) Kleindienst 3-1194, year of manufacture: 1994, connected load: 0.1kW. An on-site inspection is possible.

Transnorm belt conveyor GF 25000-1000-900 RA2416 Technical data: Conveyor length (NL): 25000 mm frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 25000 Nominal / outside width in mm: 1000 Belt width in mm: 900 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 2,2 Conveyor speed m / s: 0,2 scope of d ...

An AFS printing, laminating and coating system (corona pre-treatment) is available. Roller width: 2700mm, electrode width: 2500mm, max. mechanical speed: 250m/min, max. generator output: 6kW, operating mode: 1- and 5-core operation, electrode material: ceramic, discharge roller: ceramic, cooling type: water-cooled, pressure rollers: both sides. Documentation available. On-site inspection is possible.

Inv. Num. : 8552 Type: TMM-250 M1 Producer: Takisawa Created: 2005 Parameters: Control system: FANUC 180i Max. turning diameter: 350 mm Maximum spindle speed: 4000 1/min Bar diameter: 50.8/76.2 mm Length: 4745 mm Width: 2932 mm Height: 2250 mm Weight: 8500 kg Equipment: 2 spindles and 2 heads with driven tools

Travel X/Y/Z: 1300mm/900mm/1000mm, table dimensions X/Y: 2000mm/750mm, max. table load: 5000kg, rapid traverse: 6m/min. Machine dimensions X/Y/Z: approx. 3650mm/2700mm/2700mm, weight: approx. 9000kg, control: Heidenhain TNC 150. Documentation available. An on-site inspection is possible.