james burn used for sale

james burn ex610 - 2:1 square 2:1 round 3:1 square 3:1 hanger punch 4:1 ellipse and separator bracket patterns available james burn epx700 james burn bb43h - 1/4_5/16_3/8_7/16_1/2_9/16_5/8_3/4_7/8_1_ 1/4 hanger 3/8 hanger they have jaws james burn cd610 - 1/4 It can be worn normally and with suspension up to 60 cm.

1 JAMES HEAL Elmatear tear tester for accurately testing textiles, nonwovens, and a wide variety of similar materials, including paper, board, and plastic

Demo machine Semi-automatic Equipped with 5 tools : - 2:1 1" - 3:1 3/8" New Style - 3:1 1/2" New Style - 5/16" - 2/1 3/4" Binding length : 3:1 : max 60 – min 4 2:1 : max 41 - min 4 Book thickness : 3 mm to 22 mm Output : 600/1200 per hour

serial no.: 1800 Dimensions (L/W/H): 70x70x120 cm Wire-O-System (closer only) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Model: Value, Automatic Punching Machine, Standard Tools, Belt Delivery

Machine is in good working condition. Punch has been expertly maintained. Rod ends, belts, bearing replaced as necessary to keep machine running tight. Auto Feeder, Punching Unit, vibro table Delivery, 3:1 & 2:1 Punch Max size 380x380 mm 3:1 square 4x4mm perforating tool 2:1 round 6mm perforating tool

Cutting cutter Kjellberg-Eberle - used Type: SII20 Machine No.: 1331 - 220 V, 50 Hz, 2.5 kVA, IP 31 - on 04.02.1990 a new control system (NS 3003) was installed by Etek - Built in 1974 - 4 burners - Table dimensions: 6m x 2.50m - Total area: 6m x 5.5m x 2.4m In good condition!

; ready for operation

PORO cutting machine with BURNY 2.5 control (with 50 standard macros)+ photo scope (template can be saved), 2 stueck Harris cutting torch cutting range up to 300mm, numerous dues available template table 1250x3000mm, firing table 1500x4500mm. controls shows sporadic

Deck baking oven MIWE, type: ideal 1500/4 DS-ZK - 2 thermal circuits - 2 piece gas burner - replacement steam pipes available - maintenance burner 2 x a year - maintenance oven 1 x annually by MIWE - State: good, ready lighting system: gas Baking surface: 18 m² Oven width: 1.80 m Oven depth: 2.00 m External dimensions: 2.55 B x H 2.35 m El. Supply: 400 V, 3N, 50 Hz, 6.5 kW Nominal thermal power: 121 kW Working pressure: 8-50 mbar Sales by closure. Inspection and testing according to arrangement. Costs of disassembly and transport on request. Like to disassemble and reassembly we the oven for you.

Knife Corta K 1500 / 2000 Photooptic cutting machine working area 1500mm x 3000mm cutting with propane or aceethylene under current.; ready to use

Used burn-in tunnel kiln for drying or burning products made of glass, ceramics or similar things. A total of up to 8 ovens are for sale. The belt furnaces were installed in a system for the glass foam (foam shading) production and were in use until the demo days of the complete plant. We also continue to have components of the plant, such as mills, mixers, silos, and conveyor technology. Manufacturer: MUT GmbH Jena Type: BDO 100-150 Built: 2003 Max Temp. 1100°C Connection value: 315 kW Control SIEMENS S7 -300 Length approx. 14 m Internal dimensions: approx. 300 x 1000 mm The ovens can also be used for tempering, glazing, sintering, blowing, drying and cooling of powdery or chunky goods.

Further information on request

Item Combined duo burners, gas and oil operated Fabr.: Steinmüller, type 1: G-18-K 1120/800, type 2: DAG-18-K 1120/800, y.o.m.: 1996, Burner data natural gas burner: heat output GT operation 43.6 MW, calorific value 40.09 MJ/kg, fuel mass flow 1.089 kg/s, control range 1:8, pmax.: approx. 1,500 Pa, exhaust temperature 424 degrees, (8 units), Burner data Duo oil burner: calorific value 42MJ/kg, heating oil throughput 4,600 kg/h, max. pressure before burner 13 bar, burner working area 1:5, max. Oil pressure on the takeover 18 bar, temperature before burner 240 degrees, (8 pieces), Remark: Burners must be dismantled by the customer. The burners can also be purchased individually.

The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Burner

Heating burner, bitumen burner, flame device -complete with hose and regulator

Switchgear, control, UV light -Type: Honeywell EC7830 A 1066 -Dimensions: 130/130/H115 mm -Weight: 900 g

Weishaupt Dual Fuel Burner -mu Type WM-GL20/4-A with digital combustion manager WFM Version ZM-R-3LN (SuperLowNox) Power range (N-gas) 300 - 2450 kW Power range (EL) 350 - 2450 kW Fully automatic on the oil side and gas side in a sliding step or modulating depending on the type of power control. Control range on the gas side up to 1:8 possible. Control range on the oil side up to 1:5 possible. for the combustion of heating oil EL according to DIN 51603 and natural gas according to DIN DVGW worksheet with the following components: Burner housing Blower with three-phase motor Integrated speed module for controlling Frequency converter (included) Combustion air control with drive Fuel system best. made of high-pressure gear pump with Pressure regulating valve, electrosolenoid valves as Quick-closing device nozzle stock and nozzle Magnetic coupling for shutting off the oil ...

plate thickness: mm sheet width: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m

Abicor Binzel torch neck for robot 962.0300 Robo-WH-241 straight M6 New Stock Net amount plus 19% VAT

There are two identical burners available, power: 350-2800kW, connection pressure: 15-500mbar, connected load: 9.23kW.

Fuel: natural gas, power: 300-2000kW, connection pressure: 15-500mbar, electric power: 4.32kW, operational hours counter: 38,723h, with documentation, without control cabinet.

Power: 300-2000kW, with gas pressure regulator FRS 520 Dungs and solenoid valve Dungs.

Power: 300-2000kW, with gas pressure regulator FRS 520 Dungs and solenoid valve Dungs.

Nozzle cleaning machine, torch cleaning station Gas nozzle cleaning device for MIG MAG robot welding systems BINZEL type BRS Ident. No.: 8310260 Device No.: 4212 Year of construction: 1998 Welding nozzles Dirt cutter for robots with arc welding machine Operating voltage: 24 volts DC/DC Cutter diameter inside: 8 mm Cutter diameter outside: 12 mm Stroke movement: 50 mm Pneumatics Compressed air connection: 6 to 8 bar - Milling drive via air motor ( Desoutter) - pneumatic cutter infeed movement (lifting movement) - replaceable cleaning cutter - gas nozzle fixation via pneumatic prism clamp Space requirements: L x W x H 240 x 230 x 380 mm Net weight: 8 kg good condition The milling machine for single-wire welding torches comes from a robot welding cell and worked without any problems until dismantling.; used

Fuel: Natural gas Manafacture: Remko Type: VRS170 Heating power: 198 kW Air mass flow: 12,000 m³/h Mains gas pressure: 2.6 bar

Fuel: Natural gas Manafacture: Remko Type: VRS170 Heating power: 198 kW Air mass flow: 12,000 m³/h Mains gas pressure: 2.6 bar

dreizler® dual-fuel burner in DUObloc version Operation infinitely variable modulating (gas and oil) CE certified and compliant with EN 676 gas burner with blower and EN 267 oil burner and the EU directives EU/2016/426 Gas Appliance Regulation and 2006/42/EC Machinery Directive Dual-fuel burner according to EN 676: • DUObloc version: fan separately on base frame with vibration damper, electric motor and fan wheel in sheet steel housing, with protective grille and compensator on the discharge port • Burner housing with gas/oil/air mixing device for the combustion of natural gas and liquefied petroleum gas and EL fuel oil, other liquid or gaseous fuels on request • Two-pole ignition transformer device for direct ignition of gas and oil flame • Flame monitoring via optical flame detector • Gas deficiency protection and air deficiency protection on the burner � ...

Brennerhals BINZEL, ABICOR WH241 ROBO WH241 M6 45 DEG. BENT 962.0302 New ! Dimensions: 270 x 70 x 50 mm

Joint burning machine Make Zechni Model Cimatic Year 1970? Width 490 mm Thickness up to 80 mm thickness Details Adjustable temp, pneumatic Available direct

Oil burner pump, feed pump with motor SUNTEC, ELECTRIC MOTOR PLANT BRIENZ pump: AE77C 7270 21 Pressure: 10 - 28 bar Flow rate: 80 - 115 l/h max. speed: 3600 rpm Engine: RP63M2 0,0,18 kW ( 0,25 PS ) 2800 rpm 220 / 380 V 3AC used, tested ! Dimensions: 345 x 165 x 125 mm

Safety device, flashback arrester, non-return valve, for burner gas WITT 85-30 DIN EN ISO 5175-1 EN730-1 Acetylene: ( A ) 1,,5 bar methane, natural gas: ( M ) 5.0 bar propane, liquefied petroleum gases: ( P ) 3.5 bar hydrogen: ( H ) 4.0 bar input: 1 LH MG Output: 1 LH AGS Material: Brass New ! Dimensions: 190 x 84 x 84 mm

Safety device, flashback arrester, non-return valve, for burner gas WITT 85-30 DIN EN ISO 5175-1 EN730-1 acetylene: ( A ) 1,5 bar city, long-distance and natural gas: ( CM ) 5.0 bar propane, liquefied petroleum gases: ( P ) 3.5 bar hydrogen: ( H ) 4.0 bar input: 3/4 LH MG Output: 3/4 LH AGS Material: Brass used, tested ! Dimensions: 180 x 84 x 84 mm

Grip MWW, MECHANICAL WORKSHOPS WURZEN Burner 90 W Gas connection: G 3/8 L Oxygen connection: G 1/4 R with union nut and hose connections New ! Dimensions: 250 x 50 x 55 mm

Steam boiler Loos with Weißhaupt gas burner Type: U-ND 500 capacity: 500 kg steam/h Max. operating overpressure: 1 bar Test overpressure: 2 bar Water capacity full approx.: 770 l year of construction: 2003/2004 CE-marking: 0036 incl. hot water tank with condensate pump

Masch-Nr. 159128 AB: 410 mm Book thickness: up to 80 mm, Power: up to 1200/hour electric, 380 volts

Heating, burner, gas burner -Gas type: natural gas liquid -Gas connection: 20 mbar to 1000 mbar -Nominal heat output: 3590 kW -Blower motor: 5.5 kW -Weight: 160 kg

High-frequency ignition device, heating, gas and oil burner, automatic gas burner, gas relay, Control box, burner control -Manufacturer: Siemens, automatic gas burner -Type: LFL1.333 -Dimensions: 120/105/H105 mm -Weight: 1.2 kg

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, Control box, burner control -Manufacturer: Landis & Staefa, automatic burner control unit -Type: LMG22.130A27 -Dimensions: 90/60/H60 mm -Weight: 0.2 kg

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, control box -Manufacturer: Satronic, gas burner control unused OVP -Type: DMG 973 Mod.01 -Number: 2x control units available -Price: per piece -Dimension box: 100/80/H65 mm -Weight: 0.2 kg/piece

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, control box -Manufacturer: Satronic, gas burner control unused OVP -Type: DMG 972 Mod.01 -Number: 2x control units available -Price: per piece -Dimension box: 100/80/H65 mm -Weight: 0.2 kg/piece

Flame cutting system, torch, oxy-fuel cutting system, cutting torch, welding torch, hand cutting torch, welding set -Zinser: burner set set in sheet metal box -Accessories: see pictures -Dimensions case: 480/230/H90 mm -Weight: 6 kg

High-frequency ignition device, heater, gas and oil burners -Landis & Gyr Type: LGK16.322A27 -Voltage: 220-240 V -Frequency: 50-60 Hz -Dimensions: 100/100/H125 mm -Weight: 1.2 kg

High-frequency ignition device, heater, gas and oil burners -Landis & Gyr Type: LFL1.622 -Voltage: 220-240V -Frequency: 50-60 Hz -Price: per piece -Number: 2 pieces -Dimensions: 100/100/H125 mm -Weight: 1.2 kg

High-frequency ignition device, heater, gas and oil burners -Landis & Gyr Type: LGK16.335A27 -Voltage: 220-240 V -Frequency: 50-60 Hz -Dimensions: 100/100/H125 mm -Weight: 1.1 kg

Fives Pillard Gas Burner GRC-G3 Burner from 2015. 19.75 MW x 21,000 m3/h. Manufacturer: Fives Pillard Model No.: GRC-G3 Type: Gas Burner Serial Number: 205991C3 / 205991C3 Heat output [MW]: 2.82 – 19.75 Air flow rate [m3/h]: 3,600 – 21,000 Year of construction: 2015 Hours:– Weight [kg]: 610

Cryolipolysis Machine (cryolipolysis slimming machine) This is a "fat burning machine". 1 Fat Freezing Handle: Since triglyceride in fats is converted into solid, especially low temperatures, it uses advanced cooling technology to Selectively target fat bulges and eliminate fat cells through a gradual process that does not damage the surrounding tissues, reduces unwanted fat, When fat cells are subjected to precise cooling, they trigger a process of natural removal that gradually reduces the thickness of the fat layer. And the fat cells in the treated area are gently eliminated by the body's normal metabolic process to eliminate unwanted fat. 2. 40K cavitation handle: Strong sound wave explosion fat head with collective strong sound wave head, strong sound wave of 40kHz can be emitted to the human body to violently affect fat cells and cause frictional movement between fat c ...