imt used for sale

Sell 5 pcs functioning MT Marathon CD/DVD/Bluray Inkjet Printer. Printing costs as low as 0.02 Euro per disc, between 6 and 12 times cheaper than competing inkjet printers. Equipped with four 120ml ink tanks, the Marathon Printer is capable of printing on over 2,500 discs (full-size). Based on the IMT RCD/ DVD Printer 2, the Marathon Printer integrates proven robotics technology and holds 260 discs. The Epson print engine is designed around a standard motor, ensuring flawless detail (up to 5760 dpi). The Marathon printer is an environmentally friendly printer as the refill reservoir system eliminates the need to purchase replacement ink cartridges. In addition, the system allows you to visually check the ink level.

For sale is a laminating resin system from IMT SpraySystems. The plant is in very good condition, it has been properly shut down by personnel of the machine manufacturer and filled with mesamol for protection. New price of the system is 85000.-€. The system was cleaned and visually prepared. Circuit diagram, operating instructions and maintenance overview are available. The systems were regularly inspected by the manufacturer as part of a maintenance plan. Applications: Wind power (offshore and onshore) Shipbuilding Lightweight construction Automobile industry Railways (e.g. for the sealing of track beds) Aircraft construction (especially for the construction of the individual components) Corrosion protection Concrete renovation Chemical Resistant Equipment Wastewater (especially in the sewerage system) On request, at an additional cost, the machine can undergo factor ...

Workpieces are fed in bulk, checked, bad parts are sorted out and good parts are placed in containers as bulk goods. Workpiece: Bolt, Ø 6 - 12 mm Workpiece length: 33 - 56 mm Cycle time: 1.8 s Camera inspection (dimensions and surface defects) - high-resolution matrix camera (21 Mp), dimensions - Line scan camera (4K), surface inspection Parts bunker SKAKO, 71 l volume HSMA07903 up to 125 kg in stock Original price: € 230.000,-

Vertical working stroke 435 mm Horizontal X working stroke 520 mm Recirculating ball screws diameter 40 mm Ball screw pitch 8 mm Axis movement motors 12 Newtons On-axis reading system with optional ballscrews optical scales CNC Fanuc Maximum lathe diameter 250 mm Max. put diameter 250 mm Spindle Asa 6 Max. electro spindle power 22 kW Maximum speed 6000 Rpm Maximum torque 119 nm

Maximum turnerable diameter 1200 mm Maximum permissible diameter 1250 mm Spindle engine power (S1/S6) 55 / 66 Kw Spindle maximum laps 1200 rpm ASA 15" Spindle Attachment Fast speeds 12 m/min X-axis stroke 750 mm Z-axis stroke 750 mm Rated engine torque 20 (X)-20 (Z) Nm Peak engine torque 80(X)-80(Z) Nm Nominal thrust force 1200(X) -120 (Z) N Screw pitch 10 (X) -10 (Z) mm Tools 24 Crown HIRT tool attachment Maximum weight per cell 15 kg Tool change cycle time 10 seconds Maximum weight on tool change ~ 250 Average tool weight ~ 10 Maximum milling tool diameter 150 mm Maximum tool length 350 mm Siemens Sinumerik Control

Hydraulic pump with motor, T-rotor pump, gear pump, trochoid pump NIPPON GEROTOR CO. LTD. TOP-IMT200 Pump: TOP 13MA VB Q: 6,6,6,7 l/min p: 0.5 MPa ( 5 bar ) n: max. 1500 rpm motor: 1K 0.2 kW 1410 rpm 200 V 3AC spare part for machining center MAZAK AJV25/405 ! used, tested ! Dimensions: 295 x 160 x 120 mm

SPECIFICATIONS: Max. cutter diameter mm: 55 Voltage: 380 V

Te Koop: Ultra Filtratie in 40 foot container: Type: HWUF 10060 UF/MB/10 Cap. ongeveer 45 M3 / uur. Membranes 10 pieces (2 x 5). Type IMT 10060/UF / MB capillary seven bore.

x-travel: 8000 mm y-travel: 1500 mm z-travel: 2500 mm Control: Heidenhain Itnc 530 total power requirement: 96 kW weight of the machine ca.: 55 t dimensions of the machine ca.: m Brand: CORREA/ANAYAK Typ: HVM 80 Build in : 2014 travel X/Y/Z 8,000 x 1,500 x 2,500 mm, Spindel : max. 6000 Rpm Spindelpower 28 Kw as extra :high frequency spindle, type HFS IMT Mold, max. 26,000 rpm, max. 11 kW, table dim. (floorplates)8,000 x 2,500 x 300 mm, T-slots 22 H12, distance T- slots 250 mm, table load max. 15,000 kg/m², distance spindle - column max. 1,675 mm, feeds X/Y/Z max. 30,000 mm/min, Total power 96 Kw machine weight 55,000 kg, column 12,000 kg, platen 16,000 kg, 2x CNC screen control, make Heidenhain, type CNC I 530, autom. tool changer, chain type, max. 60 tools, tool holder SK50, tool weight max. 25 kg, tool L max. 400 mm, radio manual control panel, make Heidenhain, type HR-550, telediagn ...

Pressure transmitter IMT 3296.074.001 0 - 6 bar 10 - 30 V DC Dimensions: 90 x 60 x 45 mm

Pressure transmitter IMT, INDUSTRIE-MESSTECHNIK GmbH 3396.126.616 Pressure range: 0 - 350 bar Supply voltage: 14 - 30 V DC Signal voltage: 1 - 6 V DC Connection: 1/4 ( inch ) New ! Dimensions: 90 x 60 x 45 mm

Pressure transmitter IMT, INDUSTRIE-MESSTECHNIK GmbH 3396.083.616 Pressure range: 0 - 200 bar Supply voltage: 13 - 30 V DC Signal voltage: 1 - 6 V DC Connection: 1/4 ( inch ) New ! Dimensions: 90 x 60 x 45 mm

Duct probe for measuring relative humidity and temperature IMTECH LCN-FTK140VV 0000001045109 Temperature measuring range: -20 - +80 °C measuring range relative humidity: 0 - 100 % Duct installation depth: 140 mm sensor diameter: Ø 20 mm IP65 New ! Dimensions: 185 x 85 x 50 mm