imeco used for sale

Manufacturer: Imes-Icore Type description: iCUTwater ECO Year construction: 2017 Working range: 620 x 1000 mm cutting plugs: 1 2D / 2 1/2 D or 3D: 2D Operating hours: 20 Installation mass: Dimensions 2150 x 16 15 x 1964 Power: 7.5 kW Connection power: Bar: 1500 bar fuse in amper: 32 Aoperating hours: 20 pump integrated direct driven built-in pump Tilo Klett with 1500 bar/ 2 l/min and cutting head Allfi Type X, Sand wheel feeder type Jetcut, integrated sand stockpile 25kg. Designed for focusing tube 0.90 mm and Duese 0.30 mm. Incl. control software and post processor on the machines Notebook. ; ready to use

Preliminary operating machine for year QIV/2013, 100 operating hours Basic 1530 Basic Waterjet Processing Centre 1530 Working area: X-axis 3050 mm Y-axis 1550 mm Z-axis 150 mm The abrasive water jet cutting requires the addition of a supplied abrasive cutting head. This reduces the distance between cutting head and factory tool. drives: drive side, reverse play-free linear drives in X and Y are used with stoeration-free CAN-BUS communication as well as guide well-known manufacturer. This This means maintenance and wear-free operation of the system and the long -term Drive unit X-axis is mounted on granite. Individual linear units are protected by folding beam and covers in addition to the ingress of dust and water. Accuracy: 0.05 mm / Working area Max.Speed: 15,000 mm/min Z axis German-speaking operator software for machine control Abrassiv de-sludge plant ...

Manufacturer: Imes-iCORE Type designation: iCUTwater ECO Year of constr.: 2017 Work area: 620 x 1000 mm Die heads: 1 2 1/2 D, 2D or 3D: 2D Hours of operation: 20 Dimensions: Dimensions of 2150 x 1615 x 1964 Power: 7,5 kW Power supply: Bar: 1500 bar Hedging in Amper: 32A Hours of operation: 20 Integrated pump directly driven built-in pump "Tilo Klett" with 1500 bar / 2 l / min and cutting head Allfi X-type, sand Raddosierer type Jetcut,. integrated reservoir sand 25 kg. Designed for Fokusierrohr 0,90 mm and nozzle 0.30 mm. Incl. control software and post processor on the machines notebook.

Store number: 3418 BANDS�GEAUTOMAT Manufacturer: IMET, Type: X-TECH 410 Machinen NR.: 033476001, Built: 2003 Specifications: Size sawing capacity dia. 410 mm Total output 5.5 kW Hydraulic. CNC control. Saw male 6150 x 41 x 1.3 Length: 2000 mm, Høhe: 2200 mm, Width: 3500 mm, Weight: 3450 kg

Capacity round maximum diameter: 130 mm Angle degrees maximum: 90 Feeding length automatic feeder: 0 mm Diameter sawing blade: 370 mm MACH-id    5176 MAKE        IMET Italia TYPE          SIRIO 370 SH-E / ESC YOP            2016 SPECIFICATIONS Bandsaw / Circelblade / Automat       Disc Saw Angle L / R Degrees      - 45 / 90 / + 30 Cutting capacity 90 ˚ Ø    130 mm Cuttting capacity 90 ˚ Flatt       180 x 100 mm blade dimensions     370 mm roller conveyor / push up / measuring     6000 Cutting speed M/min    70 M/min DIMENSIONS Length       14.000 mm Width          2.000 mm Height        2.000 mm

Imeca - 8 m? Pressure filtring unit - Rotary trays - Trays of 8 m2

saw blade diameter: 350 mm cutting diameter: 110 mm capacity 90 degrees: flat: 180 x 85 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: flat: 130 x 85 mm capacity 60 degrees: round: 105 mm capacity 60 degrees: flat: 90 x 85 mm turning speeds: 9-18-36-74 U/min vice: max. 180 mm Control: IMET CNC total power requirement: 1,5 / 2,2 kW weight: 710 kg range L-W-H: 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. ...

Imet Record 315/350 - Cold Saw - Suitable for cutting metal profiles and solid materials up to 70 kg/mm² - Mitre cuts from 0 degrees to 45 degrees left and right - Quick-release double vise - HSS saw blade - Pedestal with storage cabinet Specification: Cutting Capacity - 0°round: 125 mm - Square: 110 mm - Rectangular: 160 x 90 mm Cutting capacity 45° left: - Round: 105 mm - Square: 90 mm - Rectangular: 80 x 100 mm Cutting capacity 45° right: - Round: 70 mm - Square: 65 mm - Rectangular: 60 x 70 mm Machine data: - Saw blade size: 350 / 32 mm - Saw blade speed: 30 / 60 rpm - Motor power: 1.8 / 2.5 kW - Coolant tank: 40 l - Machine dimensions WxHxD: 770 x 1900 x 1200 mm - Weight: approx. 210 kg

Conveyor belt, belt conveyor, conveyor belt, belt conveyor, steep conveyor, steep conveyor -Manufacturer: IMEC, conveyor belt conveyor housing VA with adjustable guide rails -Type: ST 340 X 2000 -Speed: drive shaft 290 rpm -Conveyor rollers: Ø21 x 340 mm -Conveyor belt length: 2000 mm -Drive: ABB 0.37 kW -Total dimensions: 2010/500/H980 mm -Weight: 85 kg

IMESA Type 545-400 LR/PLC/CE Built in 2009, in good condition Hydraulically automatic electric slitter rewinder with the following equipment: - Automatic sharpening of the circular knife - fixed knife device - Multi-changeable cutting systems - smooth round knife D400x4 made of HSS steel - Also intended for saw knives - Separate control cabinet - Automatic lubrication of the circular knife - with display - Adjustable rotation speed of the circular knife - Adjustable rotation speed of the roller - Adjustable cutting speed - Adjustable speed of longitudinal movement and much more Videos explaining the features can be sent. The machine is still in production and can be viewed under power

; in stock

Vacuum pump -Drive: 4 kW -Speed: 2800 rpm -Silencer -comes: from a dust extractor

SPECIFICATIONS: Number of filter bags: 150 - Ø mm 123 04 Ker crushing plates Height mm: 3000 Fan Power Hp: 30 Star valve Ø mm 320 Tank with 15 solenoid valves Triboelectric probe Spark detection system Output screw conveyor Switch box with inverter Complete with ladders, fencing and piping

Capacity: 240 x 280mm Double sided miter Semi-automatic Mist lubrication system

Capacity 350 x 270 mm Material probe Two sided miter

Semi-automatic Double-sided miter inpsection possible video available

Capacity 300 x 180 mm / ø 255 mm / square 230 x 230 mm Semi-automatic Double-sided miter 0-60 left / 0-45 right

Table dimensions: 1400x4000mm, feed rate: 2-16m/min, length: 4500mm, width: 10,500mm, with documentation.

Year of construction: 2010 Control: NC control PC base Touch control panel Networking Spindle: HSC SK30 Tool changer: 5 fold 5 axes Isel linear guide Parts unit: Harmonic Drive A-axis Omron Engines Blank clamping via A-axis such as lathe with tailstock Machine frame kpl. Aluminium Plexiglas window on all sides Two large sliding doors Large recess for suction under A-axis - Technical errors and prior sale reserved. -

Year of construction: 1968/ 69, sheets are processed by means of sanding belts, the entire electrical system and extraction system have been renewed, another machine of identical construction is available.

: neu : 2023 : 6246 : September 2023, Zwischenv : Italien : 3449 € : 300 x (2)2,5 x 32 mm : 33/66 U/Min : 45 ° : 45 ° : rund 102 mm, Quadratprofi : rund 90 mm, Quadratprofil : rund 80 mm, Quadratprofil : 1,5/2 kW : 500 mm : 1050 mm : 990 mm : 135 kg vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equipment saw blade protection material gauge pedestal 1 saw blade operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 980 mm y-travel: 1080 mm z-travel: 280 mm Control: table-size: 1.125 x 1.700 mm table height: 800 mm diameter: 435 mm spindle pitch: 16 x 5 mm total power requirement: kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,08 x 1,98 x 2,0 m Accessories: - Tool changing station - TS20 probe - Clamping system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2022 : 6225 : prompt, Zwischenverkauf v : Italien : 4400 € : 1 : 350 mm : 1800 / 3600 U/Min : 45 ° : 45 ° : rund 120 mm, Quadratprofi : rund 115 mm, Quadratprofi : rund 115 mm, Quadratprofi : rund 65 mm, Quadratprofil : 1,5/1,8 kW : 610 mm : 880 mm : 990 mm : 163 kg DEMO MACHINE - MINT CONDITION manual circular saw for aluminium stops at0°, 15°, 30°, 45°left and right hand-wheel to lock the head on all angles, graduation engraved on the worktable pair of front vices with quick clamping, free to move alongside the worktable aluminium removable jaws sawing blade protection material stop coolant equiptment head return by springs pedestal 1 saw blade users manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2022 : 6232 : prompt, Zwischenverkauf v : Italien : 4400 € : 1 : 350 mm : 350 x (2)2,5 x 32 mm : 30/60 U/Min : 45 ° : 45 ° : rund 125 mm, Quadratprofi : rund 105 mm, Quadratprofi : rund 70 mm, Quadratprofil : 1,8/2,5 kW : 600 mm : 1220 mm : 1060 mm : 206 kg DEMO MACHINE - MINT CONDITION very robust construction suited to cut metal profiles and solids (steel with resistance up to 70 kg/mm²) vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equiptment sawing blade protection material stop thermic and magnetic motor protection 90° longitudinal cuts are possible thanks to the rotating vice pedestal 1 saw blade users manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 13 - 73 U/min total power requirement: 3,0 kW weight of the machine ca.: 0,95 t dimensions of the machine ca.: 1,9 x 1,45 x 2,1 m High-performance vertical circle saw, fully automatic hydropneumatic. · Miter left. 60° + right. 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Gear ratio, integrated into a stable cast housing Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts. Also included Quick lateral movement when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip clearin ...

capacity 90 degrees: round: 230 mm capacity 90 degrees: square: 230 mm : 280 x 150 band speed: 35/70 m/min saw band length: 2770 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,37 kg Dimensions (LxWxH): 1,5 x 1,2 x 1,3 0 Band saw including micro spray device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Cylinder-controlled lowering system Hydraulic clamps weight approx.: 600 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,300 x 2,000 mm

Description: serial number: IT46011685 Approx. Onsite Dimension. (l x w x h): 2,300 x 900 x 2,000 mm, weight approx.: 1,300 kg

Description: Double miter band saw with new engine and gearbox Completely overhauled! - Semi-automatic - Miter 45° / 60° Cutting range at 90 degrees: around 230 mm Cutting area at 90 degrees: square 230 mm Cutting area at 90 degrees: rectangle 280 x 150 Belt speed 35/70 m/min Saw band length 2770 x 27 x 0.9 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.37 t Dimensions LxWxH 1.5 x 1.2 x 1.3m weight approx.: 370 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,200 x 1,300 mm

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Werner & Pfleiderer Type: Double Z Kneader UK11 with hand tilting imensions pot: 400x400x330mm (lxbxh) Utilizable contents: ca. 40 l Gesamt / 30kg Teig imensions: 1700x1300x1650mm (l/w/h) Weight: ca. 530 kg different: - hand tilting - standard steel construction We offer this machine in 'as is' condition, without warranty, ex warehouse (Incoterms EXW and without packaging. ex Warehouse Hess. Lichtenau, (EXW)unpacked

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but no workday & fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Whale 36/210 | 36l/min. at 210bar | Engine: Honda GX630 14.7kW Whale 43/180 | 43l/min. at 180bar | Engine: Honda GX630 14.7kW Whale 55/160 | 55l/min. at 160bar | Engine: Honda GX690 17.7kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 650x1.000x1.030 mm Empty weight without water tank: approx. 250 kg Dimensions and unladen weight with 300 l water tank: approx. 1,160x1,000x1,030 mm and approx. 280 kg Dimensions and unladen weight with 500 l water tank: approx. 1,260x1,000x1,030 mm and appr ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Salmon 60/200 and 75/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Salmon 60/200 | 60l/min. at 200bar | Engine: Vanguard 35 HP 26kW Salmon 75/150 | 75l/min. at 150bar | Engine: Vanguard 35 HP 26kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 700x1.250x1.200 mm Dimensions with 400l water tank LxWxH: approx. 1.300x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 2,000x1.250x1.200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400l water tank: approx. 320 kg Empty weight with 800l water tank: approx. 350 kg HIGH-PRESSURE PUM ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW TIER III Moses 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW TIER III Moses 30/300 | 30l/min. at 300bar | Engine: Kohler KDW 1404 26kW TIER III Moses XL 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 50/30 ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frame with forklift load suitable for installation in company vehicles. PTC Dolphin 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Dolphin 75/210 | 75l/min. at 210bar Dolphin 84/190 | 84l/min. at 190bar Dolphin 102/150 | 102l/min. at 150bar DIMENSIONS / WEIGHT: Dimensions and weight without water tank LxWxH: approx. 1,240 x 1,300 x 1,300 mm, approx. 650 kg Dimensions and weight with 500 l water tank: approx. 1,850 x 1,300 x 1,300 mm, approx. 580 kg Dimensions and weight with 800 l water tank: approx. 1,950 x 1,300 x 1,300 mm, approx. 620 kg Dimensions and weight with 1000 l water tank: approx. 2,020 x 1,300 x 1,300 mm, approx. 640 kg  ...

High-pressure cleaning device, high-pressure rinsing, high-pressure washer on hot-dip galvanized and painted high-quality steel frames with forklift slacks. PTC Tornado 60/200, 75/150, 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Tornado 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW Tornado 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW Tornado 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW Tornado 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW Tornado 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW DIMENSIONS / WEIGHT: Dimensions and weight with 680l water tank LxWxH: approx. 2.300x1.310x1.310 mm, approx. 640 kg Dimensions and weight with 1000l water tank LxWxH: approx. 2.300x1.310x1.630 mm, approx.  ...

High-pressure cleaning device, high-pressure rinsing, high-pressure washer with suction device on hot-dip galvanized and painted high-quality steel frame with forklift tabs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction capacity - Petrol engines: for sucking Honda GX390 8.8kW and for cleaning - Honda GX690 17.9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction capacity - Diesel engines: for sucking Yanmar L100 8.0kW and for cleaning Kohler KDW 1003 18.9kW HIGH PRESSURE PUMP 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium Cxr8gqdby HIGH-PRESSURE HOSE REELS: Type: manual hose reel Material: Stainless steel • Capacite: max. 50 m 1/2" high-pressure hose Hose: 50 m 1/2" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: Stai ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 75/150 | 75l/min. at 150bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 30/300 | 30l/min. at 300bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses XL 75/210 | 75l/min. at 210bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 84/190 | 84l/min. at 190bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 102/150 | 102l/min. at 150bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 50/300 | 50 ...

Sw BA35 Mobile Mating Work Center Reconditioned :::TECHNICAL SPECIFICATIONS::: CNC Model: Siemens CNC version: 840D Tool attachment: iso 40 Spindle power: 22.5Kw Spindle Rpm: 10000 Number of tools: 36 X-Axis Stroke: 2650mm Y-Axis Stroke: 500mm Z-Axis Stroke: 500mm X Y Z Linear Axe Rapid Feeds: 40m/min Table size: 3600x500 ( 2x1800)mm Guides: roller CNC divider: yes Brand and partition model: Fibroplan Flange diameter: 340mm Rotation: continuous Chip evacuator: carpeted Machine equipment: 20 cones :::D IMENSION AND WEIGHT::: Length: 6300mm Width: 3200mm Height: 3200mm Weight: 12000Kg

HYUNDAI SPT V550D VERTICAL MACHINE CENTER :::TECHNICAL SPECIFICATIONS::: CNC Model: Siemens Tool attachment: iso 40 Spindle power: 18.5Kw Spindle Rpm: 10000 Number of tools: 24 X-Axis Stroke: 570mm Y-Axis Stroke: 410mm Z-Axis Stroke: 580mm Fast forward linear axes X Y Z: 36m/min Guides: roller Pallet change: yes Pallet size: 2x 650 x 410mm Rotopallet: yes :::D IMENSION AND WEIGHT::: Weight: 6000Kg

:::TECHNICAL SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 0i-TC Main spindle nose: ASA 6 Main spindle self-centering diameter: 250mm Main spindle bar passage: 65mm Turning diameter: 280mm Turning length: 550mm Number of turns main spindle: 4000 Number of Tool Towers: 1 Number of tool places first turret: 12 Number of motorized first turret: 12 First turret tool attachment type: VDI 30 X axis travel first turret: 245mm Z axis stroke first turret: 600mm Rapid advances linear axes X Y Z: 36m/min Tailstock: yes Barrel stroke: 190mm Chip evacuator: carpet Number of motorized tool holders supplied: 2 Number of fixed tool holders supplied: 10 :::D IMENSIONS AND WEIGHT::: Length: 3415mm Width: 1786mm Height: 1780mm Weight: 3900Kg

:::TECHNICAL SPECIFICATIONS::: CNC Model: Siemens CNC Version: 840D Main spindle nose: ASA 8 Inverted lathe: yes X axis spindle travel: 850mm Z axis spindle travel: 250mm Stoker or spare parts warehouse: yes Main spindle power: 43Kw Main spindle self-centering diameter: 315mm Turning diameter: 250mm Turning length: 125mm Number of turns main spindle: 4300 Number of Tool Towers: 1 Number of tool places first turret: 12 Number of motorized first turret: 12 First turret tool attachment type: VDI 50 Rapid linear axis feeds X Y Z: 45m/min Chip evacuator: carpet Number of motorized tool holders supplied: 1 Number of fixed tool holders supplied: 10 :::D IMENSIONS AND WEIGHT::: Length: 3380mm Width: 1300mm Height: 2900mm Weight: 7000Kg

CNC Model: Fanuc CNC version: 18i-T Main spindle nose: ASA 6 Main spindle power: 22Kw Main spindle self-centering diameter: 210mm Main spindle bar passage: 65mm Turning diameter: 250mm Turning length: 500mm Number of turns main spindle: 4000 Number of Tool Towers: 1 Number of tool places first turret: 12 Number of motorized first turret: 12 X axis travel first turret: 215mm Z axis travel first turret: 510mm Rapid linear axis feeds X Y Z: 24m/min Counter-spindle: yes Spindle nose: ASA 5 Number of spins: 4000 Power against spindle: 3,7Kw Bar passage: 43mm Z stroke counterspindle : 515mm Bar loader model and brand: Iemca Master 880 Chip evacuator: carpet operated Presetting: yes Number of motorized tool holders supplied: 4 :::D IMENSIONS AND WEIGHT::: Length: 4000mm Width: 1900mm Height: 1800mm Weight:  ...

Vertical machining center DMU 60 :::TECHNICAL SPECIFICATIONS::: CNC Model: Heidenhain CNC version: iTNC 530 Tool connection: HSK 63 Spindle power: 12Kw Number of Spindle Revolutions: 12000 Number of tools: 24 ( 12 x 2 ) X Axis Travel: 630mm Y Axis Travel: 560mm Z Axis Travel: 560mm Rapid linear axis feeds X Y Z: 20m/min Table dimensions: 1000 x 600mm Table capacity: 500Kg Guides: roller High refrigerant pressure: yes Chip evacuator: carpet operated :::D IMENSIONS AND WEIGHT::: Length: 3500mm Width: 2700mm Height: 2210mm Weight: 6500Kg

FIXED BENCH MILLING MACHINE :::TECHNICAL SPECIFICATIONS::: CNC Model: Selca CNC Version: S3045 Head Type: Manual Brew head Tool connection: iso 50 Spindle power: 15Kw Number of spindle revolutions: 3000 X Axis Travel: 2500mm Y Axis Stroke: 815mm Z Axis Travel: 1037mm Rapid linear axis feeds X Y Z: 10m/min Table dimensions: 2700 x 730mm Table capacity: 4000Kg Guides: flat Cutter type: fixed bench :::D IMENSIONS AND WEIGHT::: Length: 6600mm Width: 3300mm Height: 2925mm Weight: 9700Kg

:::SPECIFICATIONS::: CNC Model: Fanuc - CNC version: 31i - MODEL B - Tool connection: BT 40 - Spindle power: 25Kw - Number of spindle revolutions: 12000 - Number of tools: 60 - X Axis Stroke: 710mm - Y Axis Stroke: 680mm - Z Axis Stroke: 680mm Rapid feeds linear axes X Y Z: 50m/min Guides: roller Pallet size: 500x500mm Pallet type: continuous Maximum load allowed: 500 x 2Kg High cooling pressure: yes System with external tank with filter: yes Chip evacuator: carpet Other technical data: Normal chip evacuation system and dust scraping :::D IMENSIONS AND WEIGHT::: Length: 4600mm Width: 4500mm Height: 3100mm Weight: 16000Kg

:::SPECIFICATIONS::: CNC Model: Okuma OSP CNC version: U100 - L Spindle nose: ASA 6 Spindle power: 22Kw Main spindle revolutions: 5000 Turning diameter: 630mm Bar clearance: 51mm Turning length: 1170mm Number of tools: 44 Tool connection: HSK 63 Spindle power: 7,7Kw Number of spindle revolutions: 6000 X Axis Stroke: 475mm Y axis stroke: + - 80mm Z Axis Stroke: 1155mm Swivel B-axis travel: 0.001degree Rapid feeds linear axes X Y Z: 40m/min High cooling pressure: yes Pressure value: 120bar System with external tank with filter: yes Number of Tool Turrets: 1 Number of tool places before turret: 12 First turret tool attachment type: VDI Counter-spindle: yes Number of counter-spindle revolutions: 6000 Counterspindle power: 22Kw Bar clearance: 32mm Z stroke counterspindle : 1180mm Model and brand bar magazin ...

Makino A55e Horizontal Machining Center ::SPECIFICATIONS::: CNC Model: Makino CNC version: Professional 3 (Fanuc 16iM) Tool connection: HSK 63 Spindle power: 20Kw Number of spindle revolutions: 14000 Number of tools: 133 X Axis Stroke: 560mm Y-axis stroke: 560mm Z Axis Stroke: 600mm Rapid feeds linear axes X Y Z: 90m/min Guides: roller Pallet size: 400x400mm Pallet type: indexed Maximum load allowed: 500Kg High cooling pressure: yes Pressure value: 70bar System with external tank with filter: yes Chip evacuator: carpet Machine equipment: Marposs probe :::D IMENSIONS AND WEIGHT::: Length: 4800mm Width: 2200mm Height: 3000mm Weight: 9000Kg

Horizontal machining center Kafo HVC 500 :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 18i MB Tool connection: BT 50 Spindle power: 25Kw Number of spindle revolutions: 10000 Number of tools: 60 X Shaft Stroke: 720mm Y Axis Stroke: 650mm Z Axis Stroke: 650mm Rapid feeds linear axes X Y Z: 48m/min Pallet size: 500x500mm Pallet type: indexed Pallet degrees: 0.001 Maximum load allowed: 800Kg High cooling pressure: yes Pressure value: 20bar System with external tank with filter: yes Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 4035mm Width: 5170mm Height: 3000mm Weight: 13000Kg

ARBURG 200 TON WITH ROBOT WORKING HOURS ARE PRESENT ON THE PHOTOS YEAR : 1999 TECHNICAL DATA: EUROMAP SIZE: 2000-675 CLAMPING FORCE: 2000KN SCREW 50mm closing force: 90 kn OPENING STROKE MAX 650mm I EXCELENT WORKING CONDITION, MACHINE IS WORKING DAILY PRODUCTION MACHINE IS AWAILIBLE IMEDIATELY WE ORGANIZE DISMANTLING LOADING AND TRANSPORT TO THE CUSTOMER

:::SPECIFICATIONS::: CNC Model: Mitsubishi CNC version: Meldas 60S series Main spindle nose: ASA 5 Main spindle power: 7,5Kw Main spindle bar clearance: 52mm Turning length: 290mm Main spindle revolutions: 4000 Number of tool turrets: 2 Number of tool places before turret: 8 Number of fixed tool spaces before turret: 8 X axis travel before turret: 120mm Z axis travel before turret: 200mm Number of tool spaces second turret: 5 Number of fixed tool places second turret: 5 X axis stroke second turret: 240mm Second turret Z Axis Stroke: 290mm Rapid feeds linear axes X Y Z: 16m/min Model and brand bar magazine: Iemca Boss 551 - E Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 2130mm Width: 1800mm Height: 1800mm Weight: 2400Kg