illig k used for sale

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K (refurbished in 2003) Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder & Blower

ILLIG STAL80 Trim Press, age 1988:- Technical data ILLIG STAL 80 :  Punching table area max. 1000 x 510 mm  Material width max. 800 mm  Infeed length 20 - 400 mm  Stroke height 200 mm  Mold height 272 mm Part height (positive and negative) max. 100 mm  Number of strokes (infinitely variable) 25 - 130 /min Trimmed Parts are stacked through the Punch Tool The Skeletal Waste is fed directly into the Grinder ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, age 1995

THERMO FORMING MACHINE ILLIG RDM K 50 WITH INLINE EXTRUDER (COMPLETE LINE) M. No.: 322 Counter: 80188 hours // Power: 800-1000 kg/h Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Kuhne Extruder KF70E & Co. Extruders K45-24D -Colotronic dosing unit CSK30 with 4 components -Kuhne smooth and cooling rolls (calendering) / GA4/900; puller: BA2-1/900 -Thermoforming machine ILLIG RDM K 50 -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -Illig mill RS75B // Age: 1999 Fully existing infrastructure; control cabinets, pumps, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp

Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.

Illig RDM 37/10 Thermoforming Line - Made in Germany - Year of construction: 1986 - Under & Top Heating - DIV - Moulding area: 475 x 250 mm max. - Film width: 495mm min / 150mm max. - Refurbished: new bearings, new bolts, new bushings & electronics, etc. - Fully functional - with many accessories - several different forming tools Produce cups, bowls and similar products with the ILLIG RDM37/10 pneumatic forming machine. The thermoformer with forming/stamping technology works reliably with precision mechanical drives and delivers high molded part quality and performance.

Illig RDM75K age 1998, refurbished in 2019, with Siemens S5 PLC Controls, used only for ca. 50,000 hrs ELAU B1 Display with Touchpad controls Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 750 mm Max. Indexing length 480 mm Top & Lower heaters, total connected load top & bottom heaters 111.3 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 700 x 450 mm Hydraulic Cylinder Plug Assist with Bosch Rexroth Hydraulic Power Pack, completely Overhauled in 2019 Max. Part height 150 mm Max. Mold closing force 25,000 daN Auto Lubrication system Siemens S5 PLC Controls New original ILLIG/ RITTAL Control Cabinet Cooling System added in May-2023.

ILLIG PLS75B Inline Counter/ Stacker, with Hole Punch Station, age 2006 used Inline with ILLIG RDM75K ! Max. Stacking Area: 750 x 350 mm Min Height of formed product: 25 mm Max. height of Formed Product: 150 mm Min. dia. of product : Ø 40 mm Max. dia. of Product: Ø 150 mm Max. length of Product Stack: 730 mm Output rate of Product Stacks: 1200 Stacks/ hr Rotating Head to neatly remove Products from the Thermoformer Mold Inline Hole Punch Station Inline Counter Stacker Station Compressed Air: 0.2 L at 6 bar, approximately Total Drive Rating: 19 kW Electrical specifications: 400 V, 3 phase, 50Hz (N/ PE) Cross delivery conveyor for counted cups. All Motors are Indramat Servo Motors Siemens SIMATIC TOUCH LED Operator Control Panel with Touch Pad Controls Siemens S7 PLC Controls Delivers Counted Cups/ Containers at Right Angles to machine direction New (Feb- ...

Illig SB 53- C from a workshop for the disabled with few operating hours Serinenr. 233-2484 Siemens Simatic control system Dimensions in mm approx. 2000x1600x1000 for transport reasons, the cylinder was removed (see photo) Also for sale: Illig SK 74-C from 2006

Illig deep drawing machine Type: UA 150, 14.500 h Runhour! Built: 1986 Closing unit Plate size: 1000 x 1500 Other max. plate size: 1000 x 1500 max. moulding area: 950 x 1450 max. Drawing depth: 600 UA 150 has upper heating small spotlight with 4 position circuit with separate control cabinet underheating has total field control, flat-fitting chip frame autom. Upper stamping system Normal construction with 2 downhill control film throughhang control Protective grille by hand 4 compartment cooling fan + 4 compartment spray nozzle cooling pre-blowers + automatic deforming, reduction frame - quick change device electron. Schleicher control in the separate control cabinet 1 clamping frame for max. mold ingescent

Due to a clearance sale this Machine is on Sale at a CLEARANCE Price Inline ILLIG RDM 63/ 15d Thermoformer with: Auto unwind stand Auto Start System Servomotor Indexing Double heating, Sheet Sag Control Auto Rail Spreading for PP Plug assist Max. form area 750 x 305 mm Max. film width 770 mm Max. index 360 mm Max. depth of draw 150 mm Encoder on the Main Drive Shaft SCHLEICHER P-SK 2/ 126F Modern PLC Controller for Control of Form Air, Blow- off etc. Pneumatic Cylinders for automatically raising the Transport Rails after Forming Cycle. aids in removal of difficult Products from the Mold Separate Control Cabinet Machine is ready for PP

PS, K-Resin Lid Mold for the ILLIG RDM 58/ 3, dia. 120 mm, 8 Cavity, together with associated stacker Parts

This ILLIG SB 74E-9 vacuum forming and punching machine for plastics was made in the year 2007 in Germany. The machine has a working area of 505 x 775 mm.

Skinpack machine, packaging machine, thermoforming machine, vacuum forming machine -Manufacturer: Illig, skin pack machine type SK 74c -Foil width: 540 mm -Roller conveyors: each 1000 x 560 mm -Work table: dimensions see photos -total Motor output: 1.9 kW -total Heating power: 8.9 kW -Dimension: 3070/1710/H2520 mm 838 kg -Accessories: incl. 8 foil rolls Ø290 x 540 mm 276 kg -Transport dimension: 1710/1070/H2520 mm / 1200/800/H700 mm -Total weight: 1114 kg

ILLIG SB74 C 9 Thermoforming and punching machine Vacuum forming and punching machine for plastics. Workbench maximum 505x775 We have shutters to change the dimensions, 770x455, 400x770, 340x770 The maximum height of the die (mold) 100mm Film thickness 0d 0.15 -2.0mm Year of production 1985 - in 2019 it underwent a comprehensive modernization of automation (diagrams in the pictures) Visible in the photos. (control cabinet, controller, touch panel.) 400V power supply Input power:11.2 kW completely new drivers and diagrams. modernization completed in August 2019 since then machine worked approximately 6000 hours panel has English and Polish languages

Illig RV 53 thermoforming machine Year: 1988 Model: RV 53 Forming area (VxH): 500 × 350 Drawing depth: 100 mm Material thickness (min): 0.10 mm Material thickness (max): 1.40 mm Feeding systems: roll fed Fixed mobile table Machine in production The machine cycle is: heating, thermoforming, cutting.

Illig RV 53 thermoforming machine Year: 1990 Model: RV 53 Molding area (VxH): 500 × 350 Molding depth: 100 mm Material thickness (min): 0.10 mm Material thickness (max.): 1.40 mm Feed systems: roll fed Lower mobile table stacker Machine in production The stacker is incomplete, the top and bottom table components are missing. Cutting station fully operational, regeneration was 2 years ago, heating of the cutting station fully operational, upper and lower table in good condition, heating 100% efficient. Capacity approx. 25 cycles per minute. Cutting station regeneration, pump regeneration, chain regeneration, The drive for transporting the film has been replaced with a servo motor with an inverter

M. No.: 322 // Counter: 80188 hours Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -ILLIG mill RS75B // Age: 1999 Control cabinets, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp

Illig SK 74-C from a workshop for the disabled Year of construction 2006 Serial No.426-0172 JM80Q2 +2 pallets with approx. 38 rolls of film Dimensions in mm approx. 2200x1600x1600

Description: The forming machine is equipped with automatic sheet feeding unit. The sheet feeding unit also have a top preheater by the design of Illig. It is fully equipped with pneumatic cylinders and ceramic heating elements. Approx. Onsite Dimension. (l x w x h): 7,000 x 5,000 x 4,000 mm, weight approx.: 12,000 kg

Machine was overhauled, including moulds and tools.

Heating output: 22.15kW, motor power: 2.5kW, max. compressed air supply: 10bar, including spare parts.

Material : PS – PS/PE – PE/PS/PE– PVC – PET – ABS // Forming Area (Vxh): 700x500

Work table maximum 505x775 mm Maximum height of the matrix (mould) 100 mm Foil thicknesses from 0.15 - 2.0 mm Year of production 1983 length - 4500mm. width -1900mm. height - 2800mm. weight approx. 2000 kg. 400V power supply Max power consumption - 11.2 kW

Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

ILLIG RDM 70K PP/ PS Cup Mold, manufactured by Marbach, 77 mm cut dia., 14-Cavity Inclusive of stacker Parts

With Siemens touch display control

manufacturer : Beetz Type : UMK 1000 double Z Kneader electrical : D-Motor 380 V, 17,5 kW, 50 Hz Space required : 2350 x 1900 x 2100 mm high Bottom outlet : 310 x 285 mm, outlet height : 700mm YOM : 1975 contents : 1000 l different: - double trough-shaped steel container width 1030 x depth 1100 x high 900 mm - Overall height 1800mm to cover - double walled for steam heating - with hinged cover and grid protection - with 4 double Z kneading arms / mixing arms working in opposite directions We offer this machine in 'as is' condition, without warranty EXW Netherland, without dismantling

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Werner & Pfleiderer Type: Double Z Kneader UK11 with hand tilting imensions pot: 400x400x330mm (lxbxh) Utilizable contents: ca. 40 l Gesamt / 30kg Teig imensions: 1700x1300x1650mm (l/w/h) Weight: ca. 530 kg different: - hand tilting - standard steel construction We offer this machine in 'as is' condition, without warranty, ex warehouse (Incoterms EXW and without packaging. ex Warehouse Hess. Lichtenau, (EXW)unpacked

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Werner & Pfleiderer Type: UK 14 ½ Doppel-Z – Kneter Utilizable contents: approx. 350 l Weight: approx. 2.800 kg different: - machine need New painting, mechanical and electrical contoling before work - product touching parts in stainless steel - double jacked for heating - motorized tilting about the front axle with tilt motor - Working hours approx 2947 (read from counter) We offer this machine in 'as is' condition, without warranty, ex warehouse (Incoterms EXW and without packaging. EXW - ex Warehouse Hess. Lichtenau, unpacked

5 sets of knives for the three-knife trimmer Muller Martini Zenith 3672 Tungsten Carbide Quatro

BERGEN BRM GASKET KIT, CYLINDER HEAD MAINTENANCE KIT, O-RING KIT AVAILABLE IN OUR STOCK. BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

General SKUR1300 LocationBarneveld MakeL.A. Wolf Spezialmaschinen GmbH (D) TypeMK 2/100 Year of construction1989 Main Features MaterialStainless steel Volume100 Ltr. Motor7.5 KW Inlet diameter250 mm Specified Features - Kneader Paddle mixercheck Double shaftcheck Useful capacity100 ltr Trough sizes700x600x500mm With covercheck Inletdia. 250mm Outletdia 150mm With jacketcheck With adjustable packing glandscheck Motor7,5 kW 380 Volt Kneaders Jacketcheck Inletdia. 250mm Bottom outletdia. 150mm Capacity100 ltr. Double shaft kneadercheck Trough sizes700x600x500mm With adjustable packing glandscheck With covercheck Motor7,5 kW 380 Volt MaterialStainless steel Information With switchcheck Floorspace1,5x1,4 M Floor space1,5x1,4 M Total height1,7 M Weight1500 KgKneadersL.A. Wolf SpezialmaschinenKneaders > KneadersBrand > L.A. Wolf Spezialmaschinen What you c ...

Jaust 60 KEG / h, 3 cleaning heads 1 filling head / 1 cleaning tank, 1 mixing tank, 1 hot water tank

Only robots, as in the photos.

2 head installation 1 cleaning head + 1 filling head

Cold circular saw, metal circular saw, metal chop saw -Max. Saw blade: Ø 315 mm -with coolant device: -Saw blade speed: 33/66 rpm -Cutting area: 90° flat 135 x 80 mm -Cutting area: 45° flat 100 x 80 mm -swivel: -Dimensions: 450/800/H1700 mm -Weight: 278 kg

Brand: KUKA Model: 00216801 TEACH PENDANT SMARTPAD Condition: USED Shipping: NOT included to price Payment: 100% payment prior to collection If you need other models and more robots, please contact us. We always have many robots in Bulgaria and Turkey locations.

Kemper Long Knitter - L analog control with flour spreader Spreader adjustable Speed treadmill adjustable Height of the bands adjustable with CE plug for linking to bread system No separate power connection required on rolls Metrics: Height: 170cm Width: 200cm Depth: 90cm

Manufacturer: KNOLL Machine type: KTS-40-60-T-G Overall size: 550 x 600 x 1800 mm Output:18,5 kW RPM: 2930 Loading capacity is reliant on viscosityn

Mobile; equipped with welding torches and pipes; equipped with earthing clamp; without gas cylinder;

We sell a Sinmag spiral kneading machine incl. 3 tank cars (suitable for max. 120kg dough). The machine is in good bakery condition.

Overview The semi-automatic KEG filler was built in 2017 by the German company m+f KEG-Technik and fills 50-60 KEGs/ h into various containers. It is still in operation and can be inspected.  Technical data Capacity: 50-60 KEG/h Formats: 20l, 30l  Containers: KeyKeg, Dolium-KEG, PETainer, KEG  Filling head made of stainless steel  Pressure control by pressure switch (controls hot water and steam pressures for flushing the filling head) Sight glass for product feed line Dimensions (LxWxH): 1.150mm x 800mm x 2.150mm ±50 Control: Siemens S7  More pictures, videos and technical documentation available on request

Robot KUKA KR10 R1100 sixx KRC4 Year of construction: 2014 Number of axles: 6 Max. load capacity: 6 kg Max. working area: approx. 1100 mm Scope of delivery : Robot,Controller,Cable,Teach-Panel 2 weeks start-up guarantee.No further warranty In addition, spare parts are always available from stock. Robot is fully functional and can be viewed Auction amount is ex works Free loading The indicated retail price is exclusive of the statutory VAT of 19%. Shipping costs abroad on request. Please enter your country, city and postal code.

Kalmeijer Pastry Moulding Roller KGM 1380.912 Bra Maker : KalmeijerType : KGM 250NEWPorb number : 1380.912 BDedetails see picturePLUS POINTSThe figure roller heats up, does not sprinkle flour and thus better bakingChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer 1383.901 B KGM Pastry Moulding Roller Manufacturer : KalmeijerType : KGM 250NEWorder number : 1383.901 BDedetails see picturePLUS POINTSThe figure roller heats up, do not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer 1383.910 B KGM Pastry Forming RollerManufacturer : KalmeijerType : KGM 250NEWPorchion number : 1383.910 BDedetails see picturePLUS POINTSThe figure roller, do not sprinkle flour and thus better baking styleChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kuka industrial robot with cable panel and control cabinet