ife aufbereitungstechnik used for sale

Technical data IFE cascade screens (vibrating waste screens): Manufacturer IFE Aufbereitungstechnik GmbH, Austria Type SM 2400 x 5000 F - UW30 Year of construction 2009 Drive motor 22 kW Rated current 43 A Screen dimensions overall 5,000 x 2,400 mm (l x w) Dimensions of individual sieve segment 950 x 800 x 130 mm (l x w x d) Screen hole grid 150 x 125 mm Length of screen fingers (steel tubes in front of the screen segments) 400 mm Swing width max. 18.5 mm Weight approx. 6,600 kg Possible applications: The waste screen is suitable for use in plants for sorting household waste, commercial and industrial waste, paper and cardboard, scrap metal and electrical waste. Blockage-free screening with the most difficult feed materials, with high throughput capacity, no pigtail formation with oversize particles, loosened oversize particle discharge over the entire screen width and no downtimes for s ...

Split sieve coverings for an IFE dewatering screening machine 1 pcs L 500 mm x W 800 mm gap 0.3mm 1 pcs L 1000 mm x W 800mm gap 0.3 mm 2 pcs L1000mm x W 800 mm gap 0.3 mm 3 pcs L1000mm x W 800 mm gap 0.3 mm 5 pcs L1000mm x W 800 mm gap 0.3 mm The pads are unused or only in use for a short time

Screen machine IFE 20/60-2 Brand: IFE Screen area : 6000 x 2000 mm – 2 deckers Screen opening upper deck: [] 80 mm Screen opening lower deck: [] 60 mm Drive: Electric motor 22 kW.

IFE Electric Magnetic Strap Brand: IFE Length frame A.A.= 2300 mm Belt width : 800 mm This magnet has 2 magnetic blocks; nr1= main magnetic block, type electro Block : L= 950 x W=900 x H=650 mm Power requirement : 3,5 kW nr2= auxiliary magnet block , type permanent Block : L= 550 x W=620 x H=190 mm Drive: 2 kW slip-on gearbox Included rectifiers.

Magnet L x W x H: 1.075 x 1.710 x 353mm. - Belt: 1.800mm. (new) - AA.: Ca. 1.850mm. - Weight: 3.280 kg.

Slicer IFE 2 x 5 m 1 Deck Version Screen lining, wire cross-tensioned Very good condition, few operating hours from a pilot plant

IFE Circular Vibrating Screening Machine Screen width 2 m Screen length 5 m 2 Decks Plastic exchange system WS 85 or similar Machine ran in limestone little wear and few hours With sieve funnel and stand-up feet

Industrial filter, electrostatic, extraction and filter system IFS INDUSTRIEFILTER - SERVICE GmbH IFEC 750 Air flow: up to 750 m3/h capacity: 0,0,85 kW supply voltage: 400 V 3AC 50/60 Hz current: 2.0 A connection: DN200 used, tested, thoroughly cleaned ! Dimensions ( space requirement ): 1320 x 650 x 620 mm

Overview of the equipment of a sorting plant, year of construction 2009, extension 2015, with a sorting capacity of 25,000 t/year For sale is a complete sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components: 1 piece feeding / dosing bunker with hydraulic moving floor and dosing drum, manufacturer Hartner, type Storage HAT 1 piece 3-deck ballistic separator, manufacturer Hartner, type Paper Sort 2 pieces overband magnetic separators, manufacturer IFE, type MEQL 1401 S-PS 2 pieces cascade screens (vibrating screens), manufacturer IFE, type SM 2400 x 5000 F - UW30 2 pieces TiTech Autosort, manufacturer TOMRA Sorting GmbH, type TITECH AutoSort 4 (NIR1-VIS) (S-2800) (X-L), incl. accelerating belts 1 piece sorting cabin with filter system, air-conditioned (heated), with 3 sorting belts and 10 sorting stations 1 piece ventil ...

cascade separator, vibrating chute, vibrating conveyor, vibrating chute, vibrating chute used Manufacturer: KARL MERZ AUFBEREITUNGSTECHNIK Type: ULA 570/50-650 built: 1987 Gutter approx. 500 x 1000 mm 2 vibrators each 0.84 kW Overall dimensions approx. 1300 x 1300 x 1400 mm e.g. For the separation of granules with shape defects, e.g. angel hair, double granules This cleaner was used for plastic granules. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Electronic Module, Input Module ALLEN - BRADLEY Analog Input Module 1771 - IFE C ( 1771-IFEC ) 96188672 A01 Dimensions: 260 x 145 x 30 mm

Year of construction: 2011 Control Siemens 840 Dsl Rotation diam. [mm] 250 Spindle: Motor spindle technology Speed 6,000 rpm Power (max.) 39 kW Torque (max.) 460 Nm Clamping cylinders Full clamping cylinders Workpiece clamping 3-jaw chuck, SMW autoblock, KNCS-NB-260-72 Tool carrier I: Technology turret with 12 stations Tool holder VDI 40 Tool drive 6,000 rpm, 7.5 kW, 24 Nm Tool carrier II: Technology:Drilling station with IK feed Tool holder Capto C8 General: Travel in X/Z 1,180/525 mm Rapid traverse in X/Z 60/30 m/min Equipment/accessories: Displacement measuring system directly in X/Z (glass scale) Chip Management Chip Conveyor Coolant management IKZ system with paper belt filter and high pressure Tool breakage monitoring ARTIS CTM Automation of circulating workpiece storage, L-type Oil mist extraction Electrostatic separator, IFS IFE2000

Case erector and case packer For product dimensions: 140 x 290 x h180mm It can be adjusted up to 240 x 500 x h300mm max. For box dimensions: 300 x 330 x h350mm, with the possibility of modifying its maximum dimensions by modifying the formats. Box closer with hot melt glue injector NORDSON 3100 Series with two nozzles, iferior and superior.