130,790 used machines on RESALE, but how to find them? Machine Search
Transnorm Rising falling Incline belt conveyor GF 7750-600-500 RA2054 Technical data: Conveyor length (NL): 7750 mm (4150 mm + 3600 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R32DT71D4BMG Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7750 Nominal / outs ...
Milkshake ice cream maker complete Auction-ID: A1-40377-11
General description Mixed lot of industrial control electronics including PCB modules, relay boards, and power electronics. Suitable for spare parts recovery, maintenance of legacy machines, or electronics refurbishment. Technical details Type: Industrial control electronics (PCB modules) Configuration: Mixed circuit boards and modules Components observed: - Relay control boards (Finder relays) - Power electronics modules with heat sinks (transistor/thyristor stages) - I/O interface boards with terminal connectors - Backplane / rack-style cards Technology: Through-hole industrial electronics (approx. 1980s–2000s) Application: Machine control systems (likely die-casting or industrial automation) Compatibility: Machine-specific control hardware Storage: Cardboard boxes with separators Equipment - Assorted PCB modules - Relay boards - Power electronic units - Indust ...
General description Industrial tumblast shot blasting machine manufactured by OMSG (Officine Meccaniche San Giorgio), designed for batch processing of small to medium metal parts. Suitable for cleaning, deburring, descaling, and surface preparation in foundry and metalworking environments. Technical details Manufacturer: OMSG (Italy) Year: 1993 Type: Tumblast / tumble belt shot blasting machine Operation: Electric with automated blasting cycle Configuration: Rotating perforated drum/belt system for bulk processing Blasting system: Internal chamber designed for steel shot blasting (turbine-based typical configuration) Loading: Pneumatic front door with actuator Control: Electrical control cabinet with contactors, relays, and frequency inverter (ELDI/DF) Dust extraction: Integrated filtration/separation unit with vertical filter and ducting Application: Batch treatment of sm ...
FAG measuring instruments: PG-20/E-F, No. 15863 No.256 If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Key data: 22 kN
Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing mac ...
GEA Intercooler 34/17/6+9/4+6-VSv-S79-16xxx Spare part from 2011, Manufacturer: GEA Model No.: 34/17/6+9/4+6-VSv-S79-16xxx Type: Intercooler Serial Number: 20012129/20 Ab. Overpressure [bar]: 2 / 2.4 Ab. Temperature 10-90 / 0-165 Year of Make: 2011
Key data: 750 kN, 40 mm
Engel - Injection Molding Machine e - Max - 310/75 ( No.:1 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 40 – diameter - Actual shot value: 40,069,660 pcs. - Operating hours: 105,347 h – In automatic: 63,211 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:2 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 34,527,644 pcs. - Operating hours: 98,349 h – In automatic: 54612 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:3 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 41,658,321 pcs. - Operating hours: 103,302 h – In automatic: 65,611 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
PERO – Industrial Parts Washer (Conveyor Type) General data: Manufacturer: Pero (KG Masch.- u. Apparate-Bau Ing. P. Erbel / Pero GmbH, Germany) Year of manufacture: 1992 Machine type: Industrial parts washer (continuous conveyor system) Condition: Used Weight: approx. 2500 kg Dimensions (L x W x H): approx. 4000 x 1800 x 2000 mm Technical details: Power: approx. 12 – 18 kW Voltage: 380 V Frequency: 50 Hz Nominal current: approx. 18.9 A Heating capacity: approx. 12 – 18 kW Working conveyor width: approx. 300 – 400 mm Process: Multi-stage cleaning system: - Washing (chemical cleaning) - Rinsing - Drying (with pneumatic system) Equipment: Roller conveyor feed system Filtration tank Pump unit Enclosed cleaning chamber PLC-based control panel (older generation) Description: Industrial conveyor-type parts washer designed for continuous cleaning and ...
Key data: 750 kN, 35 mm
Engel - Injection moulding machine e - Max - 310/75 ( No.:4 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 42,349,940 pcs. - Operating hours: 100,778 h – In automatic: 67,929 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany
Electrical coil connecto General description Mixed industrial spare parts lot including electrical, hydraulic, mechanical components, and consumables. Suitable for maintenance, repair operations (MRO), or parts recovery. Technical details Type: Industrial spare parts (mixed lot) Configuration: Assorted components stored in bins Electrical components: - Circuit breakers and protection modules (ETI) - Control relays and timers - Terminal blocks and connectors Cables and sensors: - Industrial wiring harnesses - Metal-sheathed cables (likely temperature probes / sensors) Hydraulic / pneumatic components: - Valve blocks and fittings (KBP / similar) - Brass valves and connectors - Actuator housings Mechanical parts: - Gears, bushings, couplings - Bearings and sleeves Consumables: - Bulbs (Philips) - Lubricants and chemical tubes Application: Maintenance and spare parts ...
Equipped with 2 HBM weighing sensors Auction-ID: A1-45845-33
Machine Type: Pulse Arc Inverter Welding Machine Make MERKLE Type HighPULSE 452 DW Plant No.: 93.828 Connection voltage 3 x 400 volts Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive DV 26 Fuse 32 Amps Dimensions L x W x H 1,100 x 490 x 1,000 mm Weight 140 kg Age 10 years Condition workshop tested very good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer with 2 pressure gauges 1 piece spare parts box complete Equipped 18 months w ...
Product number: 3014 Belt width: 400 mm Infeed height: 770 mm Outfeed height: 1320 mm Pitch: 400 mm Dividers: 80 mm Power: 3 x 400V, 50Hz, 0.3kW Dimensions: 2000 x 600 x 1600 mm
Equipped with 4 weighing sensors Auction-ID: A1-45845-32
General description Precision bench drilling machine IXION with integrated multi-spindle fixture, designed for small-part machining and series production. Suitable for precision drilling and tapping operations in workshop or production environments. Technical details Manufacturer: IXION (Germany) Type: Bench drilling machine Configuration: Single spindle unit with custom multi-spindle fixture Drive: Electric motor Spindle speeds: Approx. 380 – 2800 rpm (multi-stage) Operation: Manual fine feed lever with precision spindle Control: External electronic control unit (Dieter Kühne, Reutlingen) Application: Small-part series production, drilling, reaming, light tapping Mounting: Bench/workstation-mounted unit Construction: Compact column design with cast components Equipment - Precision drilling head - Multi-spindle / jig fixture - External control unit - Fine feed me ...
General description Mixed CNC tooling set compatible with BT30 / ISO30 spindle systems, including tool holders, collets, and cutting tools. Suitable as a complete starter package or spare tooling inventory for CNC machining operations. Technical details Type: CNC tooling set (mixed lot) Compatibility: BT30 / ISO30 (consistent with Brother TC-R2A class machines) Tool holders: Approx. 30–45 pcs (rack + loose units) Types include: - ER collet chucks - End mill holders - Face mill arbor - Drill chucks Collets: Approx. 15–25 pcs (partial ER sets) Cutting tools: Approx. 50–100 pcs (end mills, drills, taps – mixed condition) Storage: Metal transport cage with racks and boxes Equipment - CNC tool holders (BT30/ISO30) - ER collets (partial sets) - Assorted cutting tools - Storage rack and transport cage Condition and remarks Used lot. Tool holders show normal in ...
General description Industrial storage rack system with multiple bins containing assorted fasteners, fittings, and workshop components. Suitable for maintenance departments, workshops, or resale as a bulk hardware lot. Technical details Type: Industrial storage system with contents Configuration: Multi-level steel rack with integrated storage bins Contents include: - Bolts, screws, and threaded fasteners (various sizes, including labeled M24, M16, etc.) - Nuts, washers, and spacers - Industrial connectors (CEE plugs and sockets visible) - Small machined parts and metal components - Mixed workshop hardware and accessories Organization: Partially labeled bins (alphanumeric system visible) Quantity: Large volume across multiple compartments Application: Maintenance, repair, and industrial assembly environments Equipment - Steel shelving system - Metal storage bins (mult ...
maximum number of results exceeded
please refine your search
2.500 € 
