häcker used for sale

used, kpl. 1 year warranty, plate size 400 x 400 mm, 25 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 75 liters, filter area 6m2, dimensions 3500 x 800 x 1600 mm, weight 1300 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, built-up Häcker piston pump with kpl. VA - Piping

used, kpl. 1 year warranty, built in 1999, plate size 1200 x 1200 mm, 70 plates with 50mm cake thickness (3500 liters capacity + 160 m2 filter area) or 90 plates with 30 mm cake thickness (2700 liters capacity + 205 m2 filter area), open outlet, pressure max. 15 bar, dimensions 9000 x 2000 x 2400 m m, weight approx. 18 to, PP - drip plate (motorized)

used, kpl. 1 year warranty, plate size 400 x 400 mm, 20 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 60 liters, filter area 5m2, dimensions 2500 x 700 x 1500 mm, weight 1000 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, Piston pump with cpl. Piping with built-up

used, kpl. 1 year warranty, plate size 400 x 400 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 90 liters, filter area 8m2, dimensions 2500 x 800 x 1400 mm, weight 800 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

Drum chipper MATEC economy THS 600-2/6 -Catchment level / nominal height 200 mm, hacker feeder height Max 300 -Catchment width 600 mm -Rotor diameter 600 mm -Number of rotor blade 2 -Number counter Blade 2 -Screen of change of perforation 50/50 -Steak size nominal TMP quality 25/25 mm -Feed rollers top 2 -Feed rollers down 2 -Geared motor indent above 2.2 kW -Geared motor indent below 2.2 kW -Weight approx. 2000 kg -Hacker main motor 45 kW/3 x 380 V -Feeding speed nominal approx. 24 m / min. New machine, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

The ECOSTAR 8 slices hacker with diesel drive 35 HP, 3 cyl., with an increased swivel discharge for horticulture, wine fruit, forestry, agriculture, etc. at a cheap price. With 2 blades, disk diameter 605 mm, disc speed 1200 rpm, JD diesel engine 3100, 3 cyl, 35 HP, water-cooled, feed height 200 mm, max wood diameter 200 mm, Einzugbreit 225 mm, hopper opening 600/600 mm, output per hour 5-8 cubic metres. The machine is ready for use within 1 minute. The chips can easily be abandoned on the bridge of the towing vehicle. The tedious tying of the branches fall away. Take the chips only 1 time in the hands. Watch the video movie in matnews91 on YouTube: ECOSTAR diesel JD3100 8. Price does not include trailer euro 9' 390.00 Expressly subject to technical changes, prior sale and error! Shipping costs CH / DE trucked approximately euro 280.00 MATEC systems + technology GmbH K ...

1 new funnel hacker DH 800 - 30 KW Rotor width 800 mm Rotor diameter 400 mm Number of knives 46 / concave sanded / quadruple rotatable Engine power 30 kW Electrics 400 V , 50 Hz Control control cabinet, blower cooled, with SIEMENS PLC Funnel opening 800 x 1300 mm (option: 1300 x 1750 mm) Funnel volume approx. 1.16 m3 (with hopper extension approx. 1.7 m3) Sieve as desired, 10 - 50mm Hydraulic 60 litre tank, external gear pump, oil cooler optional Dimensions ( LxWxH ) 2620 x 1738 x 1830 mm Weight approx. 3400 Kg (with hopper extension approx. 3550 Kg) Throughput capacity approx. 3 - 5 m3 per hour, depending on material and sieve Suction nozzle 200 mm, can be used on both sides Suction capacity at least 28m/sec. on suction nozzles

Wood chopper f. tractor PTO wood chipper ECOSTAR 8 as a kit for the self-Assembly (image mounted with other rotating device) - feeder height width 20/20 cm - upper feed roller with belt drive - disk hacker with 2 knives and 1 counter knife - rated about 5 cubic metres chip length nominal 15 mm - CE compliant - PTO - rotating ejector - delivered in metal crates -Warranty: 2 years on all non - consumable - options for an additional fee: - machine Assembly by supplier - pulverizing integrated to avoid excess - special execution for the manufacture of Pelletschnitzeln with 6 mm length - professional Rotary chute which together does not rust and freezes at Sub-zero temperatures, with lever - built diesel drive 35 HP - electric motor 15 kW model changes built up which are not exactly the figurative representation are reserved! Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfe ...

Accessories for Hacker Schuko ZM900-K, Y.O.M. 2014 Almost new replacement sieve with 15mm hole diameter 19 unused spare knives 34 x 34mm 2 side cuttings 20 fastening screws Built probably 2014 Please refer to the PDF file with our terms and conditions and order form. The machine can be presented on site by appointment. We only offer machines that are ready for use in our warehouse, see "further offers from this supplier".

Funnel hacker - Shredder DHB DH 600 Rotor width: 600 mm Rotor diameter: 220 mm Number of knives: 28, concave sanded, quadruple rotatable Engine power: 18.5 kW Electrics: 400V, 50 Hz Control: Control cabinet, blower cooled, Siemens PLC Opening: 600 x 785 mm Funnel volume: approx. 0.60 m3 Screen: 20/25 mm mounted (screen size 10-80 mm possible) Hydraulics: 40 litre tank, external gear pump Dimensions: 1750 x 1280 x 1650 mm Weight: 1820 kg Throughput: 1-3 m3/h, depending on material and screen size Suction nozzle: 160 mm Suction capacity: min. 28 m/s extended funnel

Shredding Machine Hacker Shredder Manufacturer: WEIMA-Maschinenbau Type: WL.4. Drive:18.5Kw. Feed opening:600x1050.mm. Rotor width:600.mm. double knife row (28.pcs.) Sieve size: still selectable

Complete AKE band sawmill consisting of: Main machine list Log manipulation RR 700 Feeding for debarking Debarking - Cambio (sold) Reducers Feeding saw line First band saw - make: AKE (vertical) Second band saw - make: AKE (horizontal) Hacker Cross-cut saw Two cutting saws - make: JONSERED Lamellar saw make: WACO Model 130 Special Hydraulic equipment Pneumatic equipment Suction Control system Spare parts inventory Round wood L = 1800 - 4500 Diameter = 100 - 1000mm Board thickness = 16 - 100mm Capacity approx. 40,000 m3 of round timber / year in 2-shift operation with an average round timber diameter of 30 cm The system was installed after a fire damage in 1998 and produced until 2004/2005. Until 2008 only limited use. In 2013, the system was professionally dismantled with extensive documentation to ensure easy installation at the new location. Technicians f ...

Hacker TH 250/650 with metal detector, sieve..

Weima WL 6 Hacker Hopper size / feed opening (mm): 800 x 1200 Rotor diameter (mm): 368 Rotor length (mm): 800 Rotor speed (rpm): 60 - 100 Drive power (kW): 22 / 30 / 37 Number of knives (pcs.): 23 / 42 2 row of knives Weight (Kg approx.): 2000 Suction nozzle diameter (mm): 200 Screen perforation (mm): 10 - 40 G&WE-WL6/18,5

Hacker RUDNICK & ENNERS Type: RE-TH 130/400/3 Year of construction: 1998 Connected loads: 400 V, with feeder vibrating chute with control box Drive power: 22 kW

Holtrop Jansma extraction system: dust filter, 4 fans, control cabinet, airlock, return air blower Type: ABFS Filter Filter surface: 230 m2 Filter capacity: 27,000 m3/hour Year of construction 1997 Ventilators: 2EMDø250‐5.5 KW RMDø400‐11 KW ETDø450 15 KW ETDø300‐5,5 KW Additional extraction for the chipper with 5.5 KW Set up/installed in a 20" container. Filter system is complete with all accessories including air recirculation. Hacker details: Gross GAZ 62 Year of construction: 1995 Motor power: 18.5kW 30 knives 30x30x15/ EC 80 Sieve perforation 10/12mm All knives, as well as the sieve, were renewed 10/2023

Hacker RUDNICK & ENNERS Type: RE-TH 130/400/3 Year of construction: 1998 Power ratings: 400 V with feeder vibrating chute with control box Y3vjq9lk Drive power: 22 kW Detect with metal sensor Vibro-gutter 2 x table : length c.a 7 m Knife tester

Complete sawmill plant (capacity approx. 80 000 m²) consists of: Round timber feeder 5 strands with separation Debarking Nicholson A2 approx. 90cm Reducer TC Remote-controlled EWD clamping carriage with cab, Swing frame gate EWD GDZ-GE 600, Splitting wedge, Conveyor systems with L/R discharge, Cross conveyor for resawing saw EWD FR 12, EWD Twin Shaft Recut Circular Saw FR12 Heavy sawmill machine with fixed hook-up. Both saw shafts are hydraulically height-adjustable. Technical data FR12 Cutting height max. 300 mm Clamping length max. 500 mm Passage width max. 900 mm Feed rate max. 50 m/min Weight approx. 15 tons Cross conveyor to sergeant, EWD OPTIMES BKO TL2 (3 movable flanges, new OPTIDRIVE BKO control) Price separator, Assortment of boards, Hacker RUDNICK&ENNERS RE-TH 250/700 75 kW with disposal

Weima WL 4 Hackers Weima Single-shaft Shredder NEW Funnel opening with logspacer 600x1050mm Funnel content 0.6m/3 Working width of the rotor 600mm Diameter of rotor 252mm Drive power 18.5 kW Rotor speed 80-120 rpm Knife number 28 pieces Type & size of knives concave / 40 x 40 mm Sieblochung 10 - 100 mm Painting WEIMA Standard RAL 2002 / 7016 Connection value 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg 2nd knife row

Towed chopper TP 760 P, wood chopper with feeder approx. 160x260 mm, combination with Reiser SCH 230 container tipper. Container loading capacity 3.5 m3, high emptying to approx. 224 cm, additional loading flap in the rear. Tyres 10.0x75-15", parking brake, Total weight 2,800 kg. Machine in non-operational condition. More bush hackers and wood chippers in stock!

Plummer block housings, plummer block housings, bearing blocks for shredders, shredders, water mills, hackers, cutting mills, granulators, cutting granulators -Quantity: 1 piece plummer block housing made of steel for heavy use -Type: bearing block inner diameter: 320 mm -Axis / center of housing: 190 mm -with: shaft sealing washers -Number: 1x bearing block available -suitable for: stock code 22236/22330/23064/23138/23236, not included in delivery -suitable for: bearing code 22236K / 22330K / 23064K / 23138K / 23236K, not included in deliver -Dimensions: 560/190 / H395 mm -Weight: 228 kg

Hackeranlage Rudnick Enners 650/200 Motor 37kw vibrorinen Metaldetector kratzforder Containerbefillen