We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,047 used machines on RESALE, but how to find them? Machine Search
used
Hypoid gearbox, I=175, TPK+050S-MF3-175-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 4,565 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: TPK+050S-MF3-175-0E1-1S11, I=175, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Free additional flange, see photos - Motor side: Centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: Centring D140mm, pitch circle D168mm x z12, - Additional flan ...
used
Hypoid gearbox, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 3,430 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: SPK+100S-MF3-500-0E1-1S11, I=500, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Motor side: centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: centring D90mm, shaft D32mm, Attention: We have the complete winding drive, rewind drive D75mm an ...
used
Max. disk diameter: 275mm, connected load: 100kVA, weight: 10t, was maintained regularly, with cooling system, an on-site inspection is possible.
used
Weight: 10t, was maintained regularly, without cooling system, an on-site inspection is possible.
used
Weight: 10t, was maintained regularly, without cooling system, an on-site inspection is possible.
used
cone distance (outside): 645 mm max. gear pitch diameter: 650 mm number of teeth: 999 total power requirement: 99 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 3 x 3 x 4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Winding drive, rewind drive D75mm and D150mm, Spanntec, new -40% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: Winding drive, rewind drive D75mm and D150mm consisting of: 1) SIMOTICS S synchronous motor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, 2) Hypoid gear, I=175, TPK+050S-MF3-175-0E1-1S11, Wittenstein, 3) Winding spigot for reel support, series 3233, D75mm, Spanntec, 4) Attachment adapter for reel support, series 5230, D150mm, Spanntec, 5) Attention: Optionally, we also have the matching motor module SINAMICS S120 6) You are wel ...
used
max. wheel diameter: 400 mm gear width: 0 mm module: pinion diameter - max.: 254 mm axial cross angle: 90 ° total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m This machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and the pinion spindle is horizontal. The pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting position whereby the gear is loaded with a preset torque. The axial pinion position can be adjusted until the quietest meshing position of the traction flank is found. Likewise, the thrust flank can be tested during the return run. Marking compound is sprayed on both sides of the teeth so the flank contact pattern can be seen. Working cycles, as well as the positioning in the tooth gap, are automat ...
used
Winder spigot for roll reception, series 3233, D75mm, A202008199/01 Spanntec, new -40% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Winder spigot to take up rolls, series 3233, D75 x 370mm, Spanntec - Mechanical-centric expansion of the clamping bars according to the principle of the inclined plane - Incl. intermediate piece to Wittenstein gear - Connection gear: centring D50mm, pitch circle D80mm x z12 - Connection winder spigot centring D50mm, pitch circle 110mm x z12 Attention: We have the complete winding drive, rewind dri ...
used
Attachment adapter for castor mounting, series 5230, D150mm, A202008199/02, Spanntec, new -40% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Attachment adapter for roll holder, Series 5230, D150mm x 330mm, Spanntec, - Attachment adapter for winding spigot D75, Series 3233, - Easy to place and fix on the carrier head - Mechanical actuation when carrier head is activated Attention: We have the complete winding drive, rewind drive D75mm and D150mm with servo motor, hypoid gear, additional flange, winding spigot and attachment adapte ...
used
SIMOTICS S Synchronmotor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, new -40% Special price The current new price of a similar product is € 1.761 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - SIMOTICS S synchronous motor, 0.82KW, 1FK7042-2AF71-1CH1, Siemens - rpm 3000 - n max. 9000, - With encoder AM24DQI and brake 24VDC - Smooth shaft D19mm - Incl. connection cable and patch cable 16 or 12m - Connection dimensions: Centring D81mm, pitch circle D100mm x z4, Attention: We have the complete winding drive, rewind drive D75mm and D150mm ...
used
Complete winding drive, rewind drive, D350mm - D650mm, IBD, mint condition -60% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: Complete winding drive, rewind drive D350mm to D650mm consists of: 1) Total 120 x 86 x 120cm high, 350kg 2) Heavy frame with bearing and shaft, IBD 3) Manually adjustable drum support D350 to D650mm x 430mm long 4) SIMOTICS S synchronous motor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, 5) Hypoid gear, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, 6) Metal bellows coupling BC2-00300AA032-000-032.000 Wittenstein ...
used
Klingelnberg S-35 10-Axis CNC Gear Cutting Machine 10-AXIS CNC CONTROL SUITED FOR MEDIUM & LARGE SPIRAL BEVEL & HYPOID GEARS 23.6" MAXIMUM WORKPIECE DIAMETER DESIGNED HIGH DEPENDABILITY & PRECISION CONTINUOUS & SINGLE INDEXING OPERATIONS SPECIFICATIONS: MAXIMUM WORKPIECE DIAMETER 23.6" (600mm) SMALLEST NORMAL MODULE 0.137" LARGEST NORMAL MODULE 0.393" MAX TOOTH WIDTH 3.93" SMALLEST TRANSMISSION RATIO 1:1 LARGEST TRANSMISSION RATIO 1:10 SPIRAL ANGLE (DEGREES) 0-60 CUTTER HEAD SPINDLE: OERLIKON SHORT TAPER 1:4 0-5.118" SPINDLE SPEEDS (INF. VAR.) 30-350 MIN-1 SPINDLE TILT (DEGREES) 0-35 ECCENTRICITY 0-10.82" CUTTER HEAD RADIUS 3.46"-7.12" WORKPIECE SPINDLE OERLIKON OUTSIDE TAPER 1:4 0-8.85" INSIDE TAPER NO. 39, 1:19,692 6" MAX SPINDLE SPEED 0-160 MIN-1 BORE 0-6.29" AXIAL OFFSET +/-2.36" SWIVEL RANGE (DEGREES) -7 UP TO 90 FEEDS: GENERATING FEED ( ...
used
Wheel diameter - max. 320 mm Wheel width 50 mm Module - max. 7.5 Module - min. 2.1 Total power requirement 13 kW Machine weight approx. 7 t Space requirement approx. 1.7 x 1.9 x 2.7 m Tooth width max. 50 mm Adjustment range for hypoid wheels (offset) +/- 60 mm. Through-hole spindle pieces 78 mm. Dive max 20 mm. Cut feeds, infinitely variable 0.04 - 25 mm/min. Distance between taper tip/workpiece spindle... 100 - 345 mm. Distance between the centre of the cone and the cutter head axis 25 - 150 mm. Distance between the center of the taper and the milling head spindle... 80 - 220 mm. Max. ring wheel Ø at medium spiral angle... 320 mm. Max. gear ratio 1 : 9.5 Module 2.1 - 7.5 Outer cone spacing approx. 170 mm. Rapid traverse 1.5 m/min. Roll feeds in minutes of angle... 0,3 - 20 Spindle nose with short taper, inside 140 mm. Spindle nose with short taper, external 85 m ...