hydraulic bending machine used for sale

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 boring of olive 1=yes, 0=no: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,6 mm pressure: 450 MPa : 150 x 150 x 90° table surface area: 650 x 500 mm : 875 mm cutting angle - upper blade: 4 ° weight of the machine ca.: 75 kg • manual notching machine with lower frame • sheet thickness (steel 450MPa) to 1.6 mm, aluminium to 2.25 mm, plastic to 3.0 mm, • machine for demonstration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1/4 - 2 -Dimensions: 510/360/H240 mm -Weight: 64 kg

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 80 - 4000 U/min transmission ratio: 18 feed range: 0,1 - 2000 mm/min rapid traverse: x = 4 / y = 3 / z = 5 m/min table load capacity: 250 kp voltage: 380 V / 50 Hz spindle drive: 5,5 kW total power requirement: 16 kVA weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,8 x 4,3 x 2,0 m • CNC-control system 432 E • Operating hours: 37719 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gate Sharper Manufacturer Vollmer for Inclined and straight ground

Bore diameter: , mm Number of heads horizontal: , St. Number of heads vertical: , St. SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung ---------------------------------------------------------------- komplett wie folgt : - Fahrbare Ausführung - Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert. - 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung - Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet - pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen für nur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm. Dübellänge : min. 25 mm. – max. 60 mm. Tiefeinsetzen = 30 mm. Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung für elektronische Dosierung in Verbindung ist, gespritzt . - Flexibler Arm mit  ...

Replacement blades for cutting machines -Knife size: 127x25.4x1.1mm -Urschel: 46097 -Number: 33x available -Price: per piece -Weight: 25 g/piece

Belt Strapping Machine Strap Strapping Device Manufacturer Mosca Verpackungstechnik Maschinenfabrik Gerd Mosca GmbH 69429 Waldbrunn Type RO-TR500-4 Year of construction 2001 Current connection 3 AC 400 Volt Current consumption 1.5kW 50Hz 2.5A PLC Siemens Simatic OP7 The machine can work both manually and automatically. The conveyor belt brings the packaged goods to the right place and the machine then strapping. Operating states Machine An automatic Open a frame Cut off tape

Replacement blades for cutting machines -Manufacturer: Stumabo -Blade size: 127x25.4x1.5 2GØ10.4 (90°) -Quantity: 25x available -Price: per piece -Minimum order quantity: 3 pieces -Weight: 25 g

Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 370 mm bore stroke: 200 mm spindle taper MT: 4 MK table:: 580 x 460 mm column diameter: 160 mm turning speeds: 75 - 2020 U/min feeds: 0,1 - 0,2 - 0,3 - 0,4 mm/U total power requirement: 1,5 kW weight of the machine ca.: 700 kg. range L-W-H: 1,1 x 0,6 x 2,35 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 16 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK2 spindle turning speed range: 50 - 2250 U/min : 320 mm : 145 mm table surface area: 500 x 140 mm connected load frequency: 230 V total power requirement: 0,5 kW weight of the machine ca.: 90 Kg dimensions of the machine ca.: 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Replacement blades for cutting machines -Knife size: 205x125x1.47 -Type: 676 FB99262 -Number: 18x available -Price: per piece

Replacement blades for cutting machines -Knife size: 205x63x1.47 -Type: 675 FB99261 -Number: 5x available -Price: per piece

Replacement blades for cutting machines -Brand: Stumabo -Blade size: 190x50x5 mm -Type: 2114662 -Number: 162x available -Price: per piece -Minimum order: 3 pieces -Dimensions: 190/50/H5 mm -Weight: 0.27 kg

x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding range: 2 - 20 mm sharp cornered angle min./max.: 90 - 135 Grad connected load: 230 V weight of the machine ca.: 8,6 Kg dimensions of the machine ca.: 0,35 x 0,2 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Counting and banding machine ATS US 2000 FSB-DBN-T; State as is; should be installed by ATS Customer Service; suitable for processing banknotes; Rontech MF-360 RAV counting feeder; 1x Banderolier ATS US 2000 AD bandwidth 40mm and frame 260x260mm; 1x Banderolier ATS US 2000 AD Bandwidth 30mmund Frame 260x120mm; Turning unit installed. Count and banding machine ATS US 2000 FSB-DBN-T; condition as is; should be installed by the support of ATS; used for banknotes; count feeder Rontech MF-360 RAV; 1x banding machine ATS US 2000 AD with band width 40mm and frame 260x260mm; 1x banding machine ATS US 2000 AD with band width 30mm and frame 260x120mm; turning station.

x-travel: 4700 mm y-travel: 1000 mm z-travel: 1000 mm control: HEIDENHAIN TNC355 table-size: 5000x1000 mm T-slots: 7x mm turning speed range: 2800 U/min feed: 6-5000 mm/min rapid traverse: 15000 mm/min spindle motor: 30,00 kW spindle taper: SK 50 Table load: 10.000 kg Main drive: 40 PS weight of the machine ca.: 27,00 t dimensions of the machine ca.: m With HEIDENHAIN TNC 355 control. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Notching machine, sheet metal notcher, notching shear, corner notching machine, corner shear, corner shear -Max. cutting capacity: approx. 2 mm -Blade length: 102 mm -Dimensions: 620/590/H1790 mm -Weight: 150 kg

grinding diameter: 1520 mm grinding length: 6000 mm grinding wheel size: 660 mm steady: 800 mm steady: 800 mm total power requirement: 15/25 HP weight of the machine ca.: . t dimensions of the machine ca.: . m 2 Steadies Coolant System The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Button machine, toggle press, crimping machine -pneumatically operated -The machine is also suitable for processing snap fasteners, canvas eyelets... -Tool -Dimensions: 610/470/H1380 mm -Weight: 52 kg

screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 62 mm injection shot weight in Polysterol: 903 g/PS closing pressure: 3300 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: unbek. mm y-travel: unbek. mm z-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 84 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 440 kN volumn: 1660 volt: V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 0 mm gear width: 0 mm max. module: 40 min. module: 1 weight of the machine ca.: 0,05 t dimensions of the machine ca.: 0,5x0,3x0,3 m pitch and run-out tester unit for gear measuring machines. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions: 670 x 430 x 870 mm : 670 x 430 mm semi-autom. working: SEMI-AUTOMATIC band length preselection via POTI Band voltage manually via coupling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Coating roller machine, roller application machine -Transfer in current condition as seen -Manufacturer: Giardina -Max. Width: 1260 mm -Casting gap: adjustable -with: 3x brush units -Connection power: 11 kW -Dimensions: 4600/2360/H1600 mm -Weight: approx. 4000 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 145 by 175 mm 29 mm high -Drawing with the photos -Number: 1x counter bearing available -Price: per piece -Dimensions: 265/125/H230 mm -Weight: 15.8 kg

x-travel: 1100 mm y-travel: 600 mm z-travel: 500 mm Control: Heidenhain TNC 335 B tool taper: SK40 table surface - upper: 1650 x 700 mm table face - lower: 1870 x 300 mm spindle speed:: 3000 Upm spindle motor: ca. 9 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal and vertical milling Position change of the head is done manually Vertical head with drilling quill, drilling depth 100 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current intensivity: 400 A open-circuit voltage: 65-75 V IP protection class: IP21 Permissible load at 35% duty cycle 400 A at 60% duty cycle 315 A at 100% duty cycle 250 A Idle power 0.49 kW Application class: S - Water cooled - With hand and foot remote control - Incl. Hose package approx. 6000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 1,5 - 25 mm lip angle: 40 - 180 ° 6-jaw-chucks: various equipment: manual included: Encapsulated drive motor: closed version, air-cooled, rotary and AC drills with cylindrical or conical shank left and right-hand drills 6 Jaw chuck Device for compressed air cooling various equipment (see pictures) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 3-40 mm drilling length: 500 mm lip angle: 15 - 75 ° total power requirement: 4,1 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,80x1,60x1,40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 610 mm work piece width: 180 mm workpiece height: 240 mm dia. of cup wheel: 200 mm table-size: Ø 280 mm spindle throat: 250 mm spindle speed:: 3000 U/min. voltage: 380 V total power requirement: 2,94 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 0,85 x 0,75 x 1,90 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 22.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: SIEMENS 840 D milling head -swivable: 0,001/0,001 Grad milling head: Universalfräskopf 45° Internal cooling system: 20 bar Chip coveyor: ja Tools changer: 30 pos. coolant: 1.100 l Tool taper: DIN 69871A ISO 50 total power requirement: 45 kW weight of the machine ca.: 68 t The round table shown in the pictures as well as the plate field are not sold with ! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /IN ...

: 55 mm : M 30 : M 36 : MK 4 spindle turning speed - stepless: 70-1.200 U/min spindle stroke: 140 mm throat: 300 mm column diameter: 145 mm : 615x430 mm distance spindle /table: min./max. 150/735 mm : 2 x 14 x 224 mm feed: 0,1 + 0,3 mm/U Machine height: 1850 mm weight: 380 kg drive motor: 1,8/2,9 kW Standard equipment: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse Item 20.1 Thread cutting device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Thread cutting performance dependent on spindle speed) ! NEW FOR YOU AS A SERVICE ! Machine leasing up to 60 months without down payment, without residual value, personal advice and individual leasing rate calcu ...

bore capacity in steel (diameter): 40 mm throat: 293 mm bore stroke: 120 mm spindle taper MT: 3 column diameter: 115 mm table surface area: 514 x 360 mm spindle turning speed - stepless: 160 - 2250 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 0,285 t dimensions of the machine ca.: m Condition: new / unused: The machine can be viewed under current.: 37981 400 V, 50 Hz, colour: light grey RAL 7035 continuous speed control, digital speed indication, push button for emergency switch off, turning switch for clockwise/counterclockwise rotation, motor protection switch, IP 54, connecting plug, finish: structure varnish, new spindle bearing, new step pulleys, belts aso. operation manual, wiring diagram. Machine has been checked in our workshop, including electr. testing report. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bread packaging machine Hartmann VS 310 Series: M86/ 211L Year of construction: 12/1993 Weight: 850kg

Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Double pump for Krauss Maffei machines Voith Rexroth control pumps 3-fold SY2DFE1-21/071-071 KM No. 6441936 MNR: R900751978

brand: CKD BLANSKO Model: SKHK 50 plateau diameter: 4770 mm maximum diameter: 5200 mm ram stroke: 2000 mm maximum height: 3000 mm capacity: 50 ton. Plateau revolutions: 1 range: 0.4-12/ 2 range: 1.6-50

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 215 to 274 mm, 41 mm high -Drawing with the photos -Number: 2x counter bearings available -Price: per piece -Dimensions: 505/180/H295 mm -Weight: 19 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 85 by 120 mm 25 mm high -Drawing with the photos -Dimensions: 235/100/H270 mm -Weight: 15.5 kg

With matching spacer rings according to photos. Scope of delivery according to photo 1.

Used flow pack packaging machine. Manufacturer Chemosvit Strojchem, model BH-07W. New 2017. Capacity 15-250 pcs/min. Available 3 pcs. (2 used and 1 almost unused)

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 136 by 178 mm 31 mm high -Drawing with the photos -Dimensions: 330/90/H220 mm -Weight: 13 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 96 by 129 mm 22 mm high -Drawing with the photos -Dimensions: 290/80/H190 mm -Weight: 12.5 kg

Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 160 x 45 mm -Clamping depth: max. 250 mm -Dimensions: 470/290/H160 mm -Weight: 40 kg

Machine vice, vice, drill press vice -Jaw width: 155 mm -Back height: 80 mm Clamping depth: max. 200 mm -Dimensions: mm -Weight: 35 kg