hot air generator used for sale

- Standard model - Opening width: 120 cm - Lifting capacity: 600 kg

- Standard model - max. opening: 120 cm - Load capacity: 600 kg

Max paper size 800 x 1280 mm Max weight 860 kgs Power 1,5 KW.

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 200 mm Table load max.: 150 kg Execution: hydraulic Max. distance from table to spindle-centreline: 415 mm Longitudinal travel (X-axis): 420 mm Transversal travel (y axis): 192 mm Table speeds: stepless from: 2 m/min up to: 28 m/min Automatic vertical feed: Vertical rapid traverse: 0.18 m/min Diameter of grinding wheel: 225 mm Width of the grinding wheel: 25 mm Wheel int. diameter: 51 mm Grinding wheel speeds: from: 2800 rpm Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 2.2 kW Total power required: 6.1 HP Machine´s weight about: 1050 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 2250 mm Dimensions electric cabinet: Length: 800 mm Width: 300 mm Height: 1450 mm Various accessories: Electrical mag ...

HBM Hottinger Baldwin Metrology; VKK2; 1996; 4 sensors each up to 2000kg; Stainless steel housing; with central detection unit terminal box; with 4 inputs and 2 outputs; designed for sourdough boiler 5000kg (Electronic scale; weighing system; without evaluation unit!)

Magnetic chuck diameter: 0 mm Grinding height: 530 mm Grinding wheel diameter: 0 mm SPECIFICATIONS Controll   ConventioneL Vario Cylindical / Surface / Other    Surface grinder X - Travel   1000 mm Y - Travel   500 mm Z - Travel   530 mm Electro magnetic table   1000 x 500 mm Work piece weight    1500 Kg DIMENSIONS Length   4000 mm Width   2300 mm Height   2450 mm  

Stack turner Hotung Mini ET; good condition; cleaned and tested; Format 950x660mm; Load capacity 750kg; Max. Stack height 1210mm. Pile turner Hotung Mini ET; good condition; cleaned and checked; Format 950x660mm; lifing capacity 750kg; max.pile hight 1210mm.

- CC controller Siemens 840 D - Year of construction 2002 Specification - Tip width: 600 mm - Tip height: 180 mm grinding Ø: 355 mm Z-axis speed: 15 m/min - min. Z-axis speed: 0.01 m/min - Axis resolution Z-axis: 0.5 μm X-axis speed: 10 m/min - min. X-axis speed: 0.01 m/min - Axis resolution X-axis: 0.5 μm - Grinding wheel left side (Øa x w x Øi): 500 x 80 x 203 mm - Grinding wheel circumference speed: 45 m/s - Power external grinding spindle drive: 10 kW - Speed workpiece spindle: 0 - 1000 m/min - Conical bore workpiece headstock: MK5 - Conical bore tailstock grain tip: MK4 - Cylindricity adjustment: +10° / - 4° - Total connected load: 28 kW - Operating voltage: 3x 400 V / 50 Hz - Total weight of the machine: 5800 kg - Operating sound level: 70 dB(A) according to EN 31201

Weight: 1.05t, with documentation, an inspection is possible.

Grinding length: 1000 mm Grinding width: 500 mm Grinding height: 500 mm Wheel diameter: 400 mm Spindle power: 16 kW X - Travel:              1000mm Y - Travel:              500mm Z - Travel:              500mm Table Length:            1000mm Table Width:             500mm Table load:              500 Feed rate X-Axis:        28000mm/min. Feed rate Z-Axis:        1000mm/min. Grinding stone dimensions:400 x 100 x 127mm Power:                   16kW Speeds:                  1400Rpm Feed rate Y-Axis:        10000mm/min. Lengt ...

technical details: - Thermal press for printing textiles (T-shirt, caps, towels, carrier bags, etc.) - Contact surface: 38 x 38 cm - Power: 1,750 W - Voltage: 230 V - Current: 7.5 A - Frequency: 50/60 Hz Shipping is of course possible. Shipping is plus freight and packaging costs, depending on size and weight. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

GEIBEL UND HOTZ FS 420 SC surface grinding machine manufactured in 2006 in Germany, is designed for single or serial grinding of workpieces. The machine, distinguished by its high performance and reliability, machines workpieces with a maximum weight of 150 kg with the circumference of grinding discs on a magnetic plate with holding force control and demagnetisation function. During the process, special sensors ensure that the grinding wheel is properly balanced, guaranteeing the highest precision and quality of machining. The GEIBEL & HOTZ FS 420 SC magnetic grinding machine uses an energy-efficient hydraulic system to drive the work table, which provides the exact oil flow required to move the table. The pump is equipped with special filters to remove ferromagnetic impurities and non-magnetic substances from the coolant, resulting in safe and trouble-free operation of the grinding m ...

Transport trolleys, platform trolleys, transport trolleys, wheels, table trolleys, assembly trolleys, complete wheels, tires with rims, stroller wheels, bicycle trailers -Manufacturer: Hota complete tire for strollers / bicycle trailers / scooters unused -Tires: 12 1/2 x 2 1/4 (57-203) -Rim: without bearings, inside O 25 mm -Quantity: 25 pieces -Price per piece -Weight: 1 kg / piece

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: hotset, heating element -Type: G06 Item No.: 268471 -Power: 800W 230V -Number: 3x elements available -Price per piece -Dimensions cartridge: O 8 x 295 mm -Weight: 0.1kg/pcs

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: hotset, heating element -Type: E03 Item No.: 140466 -Power: 800W 230V -Number: 2x elements available -Price per piece -Dimensions cartridge: O 8 x 350 mm -Weight: 0.1kg/pcs

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: hotset, heating element -Type: A06 Item No.: 246366 -Power: 800W 230V -Number: 2x elements available -Price per piece -Dimensions cartridge: O 8 x 285 mm -Weight: 0.1kg/pcs

Hotmobil MKZ 48 chiller air-cooled 96.9 kW Manufacturer: Hotmobil MKZ 48 Type: Mobile refrigeration unit Air-cooled Power: 96.9 kW Weight: 1300 kg More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

rotary table diameter: 1000 mm grinding height: 500 mm grinding head - power requirement: 17 kW control: Siemens 840D total power requirement: 45 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3x3x2,2 m - max. grinding area Ø 800 x 500 mm, - Magnetic discs Ø 800 mm, - Table load max. 1,000 kg, - max. sanding spindle speed 3,150 1/min, - max. transverse movement 600 mm, - Cup wheel Ø max. 300 mm, - max. width 80 mm, mounting hole 127 mm, - control, Siemens, with - filter unit, Knoll, type HL250/2000, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1000 mm grinding width: 500 mm workpiece height: 425 mm Control: total power requirement: 15 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1000 mm grinding width: 500 mm workpiece height: 425 mm Control: total power requirement: 15 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 800 mm grinding width: 500 mm workpiece height: 425 mm total power requirement: 15 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: 3pc HOTTINGER 5kHz Trägfrekvenz Measuring Amplifier in Lot (5kHz) Clean Items, Only Partially Tested (without Sensors) See the Pics. This old electronic is very reliable. Please find more details in the attached PDF. Approx. Onsite Dimension. (l x w x h): 800 x 600 x 400 mm, weight approx.: 50 kg

Key data: 600 mm, 450 mm

CNC surface grinding machine Geibel&Hotz FS640 Z-CB Year of construction 2021 Specifications: Sanding surface (in mm): 600 x 450 Sanding area (in mm): 600 x 400 x 375 Table load max.: 600 kg Grinding spindle motor: 3.7 kW Grinding wheel, standard (in mm): 300 x 50 x 76.2 Fork funnel with 2 shaped diamonds Folding dresser Universal paper filter machine UPF 140 / 20 Cleaning pump Compact air purification device 2nd LED machine light at the top right 6 x Grinding wheel holder flat cone Pre-installation of mobile balancing device Mobile Balancer Grinding spindle motor 7 / kW Control cabinet air conditioner Oil filling The machine has a toothed belt drive in the longitudinal axis Price net free loading from location.

internal diameter: 800 mm grinding depth: 500 mm swing diameter: 1000 mm grinding head - power requirement: 17 kW control: Siemens 840D Magnetic plate diameter: 800 mm table load capacity - central/maximum: 1200 kg spindle speed max.: 3150 U/min Cross movement max.: 600 mm cup wheel diameter: 300 mm total power requirement: 45 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3 x 3 x 2,2 m Equipment/Accessories: - various grinding spindles and grinding wheels - CBN dressing roll equipment - filter system, make Knoll, type HL250/2000 - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: High-quality Precision Rotary Table Grinding Machine with a grinding range of 800 mm and a table load of up to 1000 kg. Control system and Machine number Control system: SIEMENS , Machine number: 10 3419 0709 Working area Max. grinding area: Ø 800 x 500 mm Magnetic disc diameter: 800 mm Max. table load: 1000 kg Traverse paths and Speeds Max. grinding spindle speed: 3150 rpm Table speed: 0 - 50 rpm Max. transverse movement: 600 mm Transverse and vertical speed: 5 - 4000 mm/min Grinding medium data Standard cup grinding wheel (Øoutside x w x Øinside): 300 x 80 x 127 mm Standard grinding disc holder , Grinding wheel bore: 127 mm Clamping width: 25 - 40 mm Flange diameter: 175 mm Please take a look at the technical data and the layout plan s in the PDF file. grinding depth: 500 mm, grinding spindle speed: 3,150 rpm, control: SIEMENS, a ...

grinding diameter:355 mm grinding length:600 mm centre height:180 mm total power requirement:30 kW weight of the machine ca.:7 t max. workpiece weight:150 kg workpiece spindle stepless:0-1000 U/min CNC precision cylindrical grinding machine with mobile switching and control panel, general retrofit 1 measuring device Marposs P5 1 attached industrial filter 1 2-way robot portal robot for automatic loading

grinding length:1500 mm grinding width:700 mm workpiece height:580 mm table load capacity:2380 kp table speed -stepless-:5 - 35 m/min grinding wheel dia. x width:500 x 100 x 203 mm grinding wheel motor:18 kW speeds::stufenlos elektronisch total power requirement:35 kW weight of the machine ca.:12 t dimensions of the machine ca.:5,3 x 2,9 x 3,8 (3,18) m surface grinding machine, paper-filter, DRO 3 axis, automatic infeed, el.handwheel, full cabin

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - continuous grilling line - Total length outside: 6 m - Total width: approx. 1.300 mm - Height of the gallows: 1.200 mm - Gallows for chain hoist - 5 floors above each other - Conveyor belt of wire belt: 600 / 2,35 / 7 / 12,7 - Double-walled floor and hood, isolated

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - serial: Sprematec - length: approx. 10 m - width: 1350 mm inside / 1518 mm outdoor - heated thermal oil - year: 10/2003

Nordson FoamMelt 180 Hot Melt Machine, Hot Melt Gluer, Hot Melt Gluer H=155 cm, W=80 cm, D=80 cm Price: 7990,00 € VB plus 19% VAT. Manafacture: Nordson Model: FM 180 Year of construction: 1996 1 adjustable gear pump for even adhesive discharge Hose connections: 2 outlets, 2 returns) Hoses: 2 pcs. Tank volume: approx. 30 litres Sale only to commercial customers. In Nordson FoamMelt devices, the hot melt adhesive is foamed with inert gas (nitrogen). The larger volume results in material savings of up to 50%. During adhesive discharge, a foamed adhesive bead is created. In our opinion, the device is ideally suited to achieve significant savings in material costs for the bonding of cardboard packaging, folding cartons, etc., where it is irrelevant that the bead occasionally contains a small, visible bubble when the adhesive is discharged. The device can also be us ...

HOT AIR GENERATOR by wood . NEW machines in prompt delivery model F28 , F55CV , F85CV , F120CV Availability : ready in stock ( unless sold ) CE mark : Yes Declaration CE : Yes Instruction Manual ( Yes )

HOT AIR GENERATOR by wood . NEW machines in prompt delivery model F28 , F55CV , F85CV , F120CV Availability : ready in stock ( unless sold ) CE mark : Yes Declaration CE : Yes Instruction Manual ( Yes )

Make : Wolf Type: WLE-S-180 Built: 1993 Dimensions: 1.3 m x 2.2 m x 2.6 m (approx. WxLxH) Heating unit: 209 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 14,000 m3/h; 7.5 kW; 1435 rpm Location : Camp Herzogenaurach Sales price: € 2,990,- net, from location This plant is already on sale, similar we have in stock. We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.

nominal power: 29,8 kW; air flow: 2400m³/h; combustion chamber depth: 580 mm; slide-in door: 330 mm x 330 mm; designed for room volumes: ca. 600 m³; aproximate surface to heat up: ca. 120 m²; floor space: 600 mm x 800 mm x 1900 mm; weight: 230 kg; diameter flue pipe: 160 mm; hot air delivery pipes: 2 x 200 mm; modes: automatic and manual; Chimney guideline value: 200 mm;

nominal power: 49,9 kW; air flow: 4900 m³/h; combustion chamber depth: 650 mm; slide-in door: 370 mm x 350 mm; designed for room volumes: ca. 1000 m³; aproximate surface to heat up: ca. 220 m²; floor space: 720 mm x 1000 mm x 1900 mm; weight: 300 kg; diameter flue pipe: 160 mm; hot air delivery pipes: 2 x 200 mm; modes: automatic and manual; Chimney guideline value: 200 mm;

flue capacity: 125 kW; Conventional yeld capacity: 99 kW; flue diameter: 180 mm; hot air delivery pipes: 2 x 250 mm; flue length: 750 mm; oven width: 560 mm; oven hight: 700mm; air flow: 6300m³/h; power consumption: 1500W; aproximate surface to heat up: 1500m³; area to be heated: 300/350 m²; heater height without hot air conveying pipes: 1980 mm; heater width: 800 mm; heater length: 1280 mm; weight: 415 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic  ...

flue capacity: 175 kW; Conventional yeld capacity: 140 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 250 mm; flue length: 950 mm; oven width: 600 mm; oven hight: 860 mm; air flow: 6300 m³/h; power consumption: 8900 W; aproximate surface to heat up: 2200 m³; area to be heated: 500/600 m²; heater height without hot air conveying pipes: 2200 mm; heater width: 930 mm; heater length: 1700 mm; weight: 615 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special ela ...

flue capacity: 350 kW; Conventional yeld capacity: 279 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 300 mm; flue length: 1200 mm; oven width: 740 mm; oven hight: 1040 mm; air flow: 17800 m³/h; power consumption hot air fan: 3 kW; power consumption flue gas exhaust: 600 W; aproximate surface to heat up: 5000 m³; area to be heated: 1000 m²; heater height without hot air conveying pipes: 2500 mm; heater width: 1100 mm; heater length: 1900 mm; weight: 850 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery run ...

flue capacity: 350 kW; Conventional yeld capacity: 279 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 300 mm; flue length: 1200 mm; oven width: 740 mm; oven hight: 1040 mm; air flow: 17800 m³/h; power consumption: 2950 W; aproximate surface to heat up: 8000 m³; area to be heated: 1800 m²; heater height without hot air conveying pipes: 3000 mm; heater width: 1220 mm; heater length: 2700 mm; weight: 1575 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special e ...

flue capacity: 34 kW; Conventional yeld capacity: 29 kW; flue diameter: 160 mm; hot air delivery pipes: 2 x 180 mm; flue length: 500 mm; oven width: 400 mm; oven hight: 590 mm; air flow: 2200 m³/h; power consumption: 400 W; aproximate surface to heat up: 500 m³; area to be heated: 100/150 m²; heater height without hot air conveying pipes: 1560 mm; heater width : 550 mm; heater lenght: 920 mm; weight: 190 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic ...

Description: Gas powered, power 10.5 kW, yield 9, 000 kcal / h Approx. Onsite Dimension. (l x w x h): 500 x 200 x 200 mm, weight approx.: 5 kg

Product number: 1948 Type: COO 1350x6000 Serial number: 3-000015705 Year of construction: 2015 Belt width: 1350 mm Tiers: 3 pcs .Belt speed: 2.4 - 18 m/min .Heating: thermal oi lCooking length: 1 or 3 x 6000 mm Power: 3 x 400V, 50Hz, 18.6kW Dimensions: 8100 x 2850 x 2900 mm Flexibility in tiers: 1 linear or 3 multi-tierWith With NOVAtech dew point measurement With Clean In Place system (CIP) Provisur / Marvu infeed belt Project number: 140347200 Type: 390 Serial number: 1 Year of construction: 2014 Belt width: 1350 mm Infeed height: 1200 mm Power: 3 x 400V, 50Hz, 1.1kW Dimensions: 2300 x 2100 x 1900 mm Weight: 700 kg Provisur / Marvu outfeedbelt Project number: 140347300 Type: 614 Serial number: 1 Year of construction: 2014 Belt width: 1350 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions; 2350 x 1700 x 1200 mm Weight: 330 kg Adjustable in height and lengt ...

FlowCook completely stainless steel suitable for thermo-oil heating Belt length ± 13,000 mm Track width ± 600 mm Executing belt Belt washing system electric lifting device for the cap Total dimensions (L x W x H) : ± 15,000 x 2,200 x 3,000 mm

Used Heating Stove Int. Art. Ref. m3502 Manufacturer: Spänex Type: UL 39 RW Year of construction 1996 Power 45 kW Total weight approx. 650 kg Firebricks are good. Location: 59425 Unna The machine is welcome to be visited. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on you ...

Mounting plate dimensions: 1250x2800mm, with electronic temperature regulation, including accessories and spare parts.

There are three identical machines available, including documentation.

There are two identical ovens available, max. temperature: 250°C, length: 925mm, width: 805mm, height: 1120mm, the ovens are fully functional.