52 results Horizontal Bulldozers

similar results found in category presses

The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Category: presses
Updating date: 06.04.2020 item-No.: 145088629
approved
dealer
New in: new
Seller: country1-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

pressure: 20 tstroke: 185 mmflat steel: 200 x 12 mmworking feed: 10,0 mm/secreturn speed: 10,0 mm/minwork height max.: 930 mmtable:: 480 x 1060 mmtotal power requirement: 2,2 kWmotor: 400 Volt 50 Hzoil volume: 12,0 ltr.weight: 530 kgrange L-W-H: 1150x480x1200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 06.04.2020 item-No.: 145088616
approved
dealer
New in: new
Seller: country1-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

pressure: 40 tstroke: 285 mmflat steel: 200 x 24 mmworking feed: 10,0 mm/secreturn speed: 10,0 mm/minwork height max.: 930 mmtable:: 660 x 1250 mmtotal power requirement: 4,0 kWmotor: 400 Volt 50 Hzweight: 1450 kgrange L-W-H: 1450 x 650 x 1800 mmoil volume: 40,0 lThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 06.04.2020 item-No.: 145088644
approved
dealer
New in: new
Seller: country1-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

pressure: 80 tstroke: 285 mmflat steel: 300 x 25 mmworking feed: 10,0 mm/secreturn speed: 10,0 mm/minwork height max.: 930 mmtable:: 750 x 1425 mmtotal power requirement: 10,0 kWmotor: 400 Volt 50 Hzweight: 1700 kgrange L-W-H: 1500 x 750 x 1800 mmoil volume: 120 lThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 28.01.2020 item-No.: 132261793
approved
dealer
New in: 1977
used
Seller: country1-de ZOMA Maschinenhandel

Hydraulic horizontal alignment u bending press, electric reconditioned hydraulic multipurpose press, used, overhauled electrically Type / type: PYXWM 400 Manufacturer / make: WMW Year / year: 1977 / outdated / overhauled in 11 / 2018 Maximum pressing force / max. pressure: 400 t Piston stroke / stroke of plunger: 800 mm Height of the pressure piece shots / height of locators: 740 mm Press pieces distance of the cross traverse / locators clearance at counter cross beam: 1390... 350 mm Installation size betw. Print pieces piston Gregentraverse / width of installation b/n locators of plunger and counter cross beam: 700 mm Maximum installation distance / max width of installation: 2340 mm Depth of the counter beam / depth of counter cross beam: 820 mm Frame height / height of frame: 1000 mm Border width / width of frame: 930 mm Power consumption / connected  ...

Category: presses
Updating date: 06.04.2020 item-No.: 145323021
approved
dealer
New in: used
Seller: country1-nl Mach4metal

Capacity: 17 tOpening maximum: 150 mmWorkpiece height maximum: 100 mm Make Amada FIMAU 17 Type FIMAU 17 Year 1996 Never used Horizontal bending machine Outside diameter max. (mm)Table L = 640 Inside diameter max. (mm) Table W = 540 Max. pipe length (mm)Stroke = 150 Max. angle Force = 17 T Wall Thickness (mm)Speed 17 mm/S Die Height = 100 Manuel stop Never used ! .mach4metal.com

Category: presses
Updating date: 07.07.2019 item-No.: 126885022
approved
dealer
New in: 2000
used
Seller: country1-sk FORMEX SK s.r.o.
Location: 91943 CIFER, Trnavska 15

Pressure capacity: 8000 kg Maximum cutting area - 200 mm2 for material strength 40 kg / mm2 Horizontal radius 200 mm Clearance between the side walls 160 mm Fixed hub 35 mm Pin hole in the Stossel 38 x 60 mm Adjustability of the Stossels 70 mm Weight of 400 kg of the Presse Operating instructions The machine is located in the new value. State, probably never in use. Control actuator Stober

Category: presses
Updating date: 27.02.2020 item-No.: 145265734
New in: used
Seller: country1-de BAMEXO GmbH
Location: 52070 Aachen

D4D Crawler Loader Working Condition

Category: presses
Updating date: 06.05.2019 item-No.: 118616848
approved
dealer
New in: 1972
used
Seller: country1-de ATMH Werkzeugmaschinen-Handel GmbH

Technical details Stoesseldruck 160 tStoesselhub - max. 300 mminstallation height 645 mmPiston diameter 250 mm Clamping area 330 x 400 mmRetraction force 36 tOperating pressure 325 atueTotal power requirement 12 kWMachine weight approx. 4.25 tspace requirement approx. 2.7 x 1.33 x 1.25 m

Category: presses
Updating date: 10.05.2018 item-No.: 124591890
approved
dealer
New in: 1972
used
Seller: country1-de ATMH Werkzeugmaschinen-Handel GmbH

Technical details Plunger pressure 160 t Piston stroke - Max 300 mm Height of 645 mm Piston diameter 250 mm 330 x 400 mm clamping surface Retraction force 36 t Operating pressure 325 bar Total power 12 kW Machine weight approx. 4.25 t Space requirement approx. 2.7 x 1.33 x 1.25 m This hydraulic bending and straightening press.

Category: presses
Updating date: 02.10.2019 item-No.: 141593822
approved
dealer
New in: used
Seller: country1-at Valma Trading GmbH
Location: Turin - Italy

Machine in excellent condition. Located in Northern Italy near Turin. Can be inspected. Nominal Power 200 tonn Height closed die 900 mm Fixed stroke slide 700 mm Dimension table 1300 x 1000 mm Dimension ram 1300 x 1000 mm Light between uprights 1350 mm Max distance table – ram (PMS) 1000 mm Bottom cushion 1 Stroke rod extraction 250 mm Max extraction top cammes 190 mm Overall dimension 2400 x 1500 x 5000 h

Category: presses
Updating date: 06.04.2020 item-No.: 145823033
New in: 2017
used
Seller: country2-de Hidrobrasil GmbH
Location: Werk Brasilien

pressure:150 ttotal power requirement:20 kWweight of the machine ca.:11,5 tdimensions of the machine ca.:8800 x 1800 x 2200 mmPressure adjustment via rotary control infinitely adjustable:15-150 tCylinder diameter:100 mmPress speed (infinitely variable via joystick):0-9,9 mm/sservo motor:2 kWCooling unit:1 kWOil tank (under table):350 lOil cooling (electric):1 kW (max)

Category: presses
Updating date: 06.04.2020 item-No.: 145095866
New in: used
Seller: country1-ch Marcels Maschinen AG Schweiz
Location: Höri (Zürich) / SCHWEIZ

pressure: 63 tstroke: 200 mmdayligth: 320 mmweight of the machine ca.: 2.2 tMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 14.01.2020 item-No.: 125767957
approved
dealer
New in: used
Seller: country1-de Gewerbe Dmitri Perfilov

Nominal force, kN 20000 Moving matrix stroke, mm 280 The course heading of the slider, mm 570 The frequency of the continuous strokes of the ram, 1/min 25 Main engine power / total power, kW 160 Dimensions, mm 6400_9000_4500 Weight, kg 270000

Category: presses
Updating date: 06.04.2020 item-No.: 145509468
approved
dealer
New in: 1975
used
Seller: country1-de WMT GmbH & Co. KG
Location: Standort

pressure: 32 tstroke: 200 mmtable-size: mmworking speed:: mm/ sec.return speed: mm/secwork height max.: mmtoolpiece height max.: 240 mmtotal power requirement: 5,5 kW: 140x20 mmweight: 1,4 tdimensions: 1,2 x 1,2x 1,4 mmdaylight - horizontal: 300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 17.02.2020 item-No.: 121433920
approved
dealer
New in: 2010
used
Seller: country1-de Troostwijk Auctions
Price: used machinery auction RESALE 45.000 €

Weight 23.000Kg, Kw 150, with blade 3400mm, working hours 5844, Location: San Giuliano Milanese (MI)

Category: presses
Updating date: 17.02.2020 item-No.: 121431023
approved
dealer
New in: 2011
used
Seller: country1-de Troostwijk Auctions
Price: used machinery auction RESALE 45.000 €

Weight 23.000Kg, Kw 150, with blade 3400mm, working hours 5576, Location: San Giuliano Milanese (MI)

Category: presses
Updating date: 18.04.2017 item-No.: 16596594
approved
dealer
New in: 2006
used
Seller: country1-de Minox Maschinenhandels GmbH
Location: 76877 Offenbach/Queich

TOP condition Drive and chain 98%(neuwertig), Carbon shield Rockland, Wide floor plate 710 mm,. Worked relatively resistant to wear as a coal pusher,. 1 hand from Germany, Regularly serviced,. Shear volume 17, 00 m ³

Category: presses
Updating date: 15.11.2019 item-No.: 123189324
approved
dealer
New in: 1991
used
Seller: country1-de EBM Maschinenhandel
Location: 58708 Menden

Hydr. Horizontal straightening and bending press Pressing force: Max 160 to, withdrawal force: max 42.5 to. Operating pressure: 250 bar. Speed, front: 25 mm / sec, back: 100 mm / sec. Jaw stroke: Max 250 mm, jaw height: 350 mm. Back bearing adjustment: 0-900 mm. Working height above floor: 920 mm. Roll diameter: 80 mm Incl. control cabinet, hydraulic system and documentation. Weight: approx. 9000 kg. Good ready condition.

Category: presses
Updating date: 06.04.2020 item-No.: 145092281
approved
dealer
New in: 2014
used
Seller: country1-de Teutenberg Maschinen GmbH & Co.KG
Location: ab Standort

pressure: 6 tMaterial length, max.: 750 mmconnected load: 3,5 kWFully automatic straightening press forParts (pipes / shafts)Make: MAEType: M-AH 6Year of construction: 2014Condition: very good, only test runStraightening force: 6 to.The system is used for straightening round material and pipeswith a diameter of up to 30 mm and a maximum length of 750 mmTip width: 750 mmNumber of standard measuring points 3 piecesDirectional accuracy 0.03 mmTop height above ground: 1020 mmControl cabinet (control: Siemens S7)Connected load: 3.5 (kVA)Connection voltage: 3 x 400 V, 50 HzRequired space: Width: 2300 mm, length: 2600 mm, height: 2000 mmAdditional pictures / layout plan: available on request.Weight: about 3 to.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 06.04.2020 item-No.: 145095367
approved
dealer
New in: 2018
used
Seller: country1-de WMT GmbH & Co. KG
Location: Standort

pressure: 10 tstroke: 150 mmtable-size: 250 x 800 mmworking speed:: mm/ sec.return speed: mm/secwork height max.: 800 mmtoolpiece height max.: 100 mmtotal power requirement: 1,5 kW: 100x10 mmweight: 350 kgdimensions: 1,2 x 0,5 x 1,0 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 19.03.2020 item-No.: 14001349
approved
dealer
New in: 1976
used
Seller: country1-de MET-TECH GMBH

VERTICAL PRESSURE: 2 x 315 T, HORIZONTAL PRESSURE: 2 x 200 T, VERTICAL STROKE - UPPER PISTON: 200 MM - BOTTOM PISTON: 150 MM, HORIZONTAL STROKE: 200 MM, OPERATION PRESSURE: 280 BAR,

Category: presses
Updating date: 28.01.2020 item-No.: 333119
approved
dealer
New in: 1965
used
Seller: country1-de ZOMA Maschinenhandel

Hydraulic Horizontal Straightening Press, used Horizontal multi purpose press, used type: HHP160 max. pressing force/ max. tonnage: 160 t Year built/ year of make: 1965 Manufacturer/ make: Pellissier Hanau max. pressing force/ max. tonnage: 160 t Piston stroke/ stroke of plunger: 400 mm Piston diameter / diam. of piston: 300/ 185 mm Extension / depth of throat: 225 mm Table size/ table size: 1150 x 350 mm Pressing speed/ speed of pressing: 16 ... 6 mm / sec Advance/ advance: 75 mm / sec Return/ rapid return: 208 mm / sec Installation width between Kobendruckstück and traverse pressure pieces/ distance between plunger with ram and locators: 320 mm Distance of the pressure pieces on pistons or table / distance between locators of piston and table: 50 ... 888 mm Total p ...

Category: presses
Updating date: 06.04.2020 item-No.: 145094928
approved
dealer
New in: 2020
new
Seller: country1-de Sperling Werkzeugmaschinen
Location: Werk

pressure: 28 tstroke: 180 mmtable-size: 300 x 550 mmtotal power requirement: 4 kWweight of the machine ca.: 0,650 tdiameter of piston: 180 mmworking feed: 2 mm/secreturn speed: 20 mm/secpressure capacity max.: 200 bartoolpiece height min.: 200 mmdimensions of the machine ca.: 1150 x 750 x 1103 mmThis horizontal straightening press is designed for a wide variety of bending, profiling and straightening operations. The application of this Profi Press horizontal bending / straightening press varies depending on the accessories that can be installed on the worktable, on the tool mount and in the punch- and pin holes. This Profi Press model, the HB-28, is equipped with an angular graduation on the worktable for easy bend measurements and this horizontal press can be delivered with several tools (for example block punches) that can be mounted on the tool mount and tools that can be installed in ...

Category: presses
Updating date: 06.04.2020 item-No.: 145094723
approved
dealer
New in: 2020
new
Seller: country1-de Sperling Werkzeugmaschinen
Location: Werk

pressure: 150 tstroke: 450 mmthroat: 350 mmwork speed: 2 m/minajustment speed: 10 mm/secreturn speed: 16 mm/secpressure: 320 bardiameter of piston: 50 mmopening stroke: 700 mmtable-size: hinten / back 2000 x 500 mmTable dimensions: Main500 x 500 mmtotal power requirement: 4 kWweight of the machine ca.: 6,7 tdimensions of the machine ca.: 2,95 x 2,0 x 850 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 06.04.2020 item-No.: 145094585
approved
dealer
New in: 2020
new
Seller: country1-de Sperling Werkzeugmaschinen
Location: Werk

pressure: 220 tstroke: 450 mmthroat: 375 mmwork speed: 2,2 m/minajustment speed: 10 mm/secreturn speed: 18 mm/secpressure: 320 bardiameter of piston: 60 mmopening stroke: 800 mmtable-size: hinten / back 2500 x 600 mmTable dimensions: Main 600 x 600 mmtotal power requirement: 5,5 kWweight of the machine ca.: 12,15 tdimensions of the machine ca.: 3,25 x 2,5 x 0,90 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 06.04.2020 item-No.: 145094716
approved
dealer
New in: 2020
new
Seller: country1-de Sperling Werkzeugmaschinen
Location: Werk

pressure: 300 tstroke: 450 mmthroat: 450 mmwork speed: 2,1 m/minajustment speed: 10 mm/secreturn speed: 16 mm/secpressure: 320 bardiameter of piston: 60 mmopening stroke: 900 mmtable-size: hinten / back 2500 x 750 mmTable dimensions: Main 750 x 750 mmtotal power requirement: 7,5 kWweight of the machine ca.: 15,3 tdimensions of the machine ca.: 3,35 x 2,5 x 1,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 06.04.2020 item-No.: 145094576
approved
dealer
New in: 2020
new
Seller: country1-de Sperling Werkzeugmaschinen
Location: Werk

pressure: 400 tstroke: 450 mmthroat: 450 mmwork speed: 2,1 m/minajustment speed: 9,5 mm/secreturn speed: 12,5 mm/secpressure: 320 bardiameter of piston: 60 mmopening stroke: 1100 mmtable-size: hinten / back 2500 x 750 mmTable dimensions: Main 750 x 750 mmtotal power requirement: 11 kWweight of the machine ca.: ca. 20 tdimensions of the machine ca.: 3,75 x 2,5 x 0,95 mThe straightening and forming presses have been specially developed for straightening and bending profiles, bars and beams. The horizontal design of the machine allows the easy handling of large beams and profiles. Description: Description:• Made of ST-52.3 grade steel • The presses have a main table (press table) and a back support table made of CK-42 grade stainless steel Each with two T-slots in accordance with DIN 650 and blocks • The main table ensures an exact parallelism by means of lateral colum ...

Category: presses
Updating date: 14.01.2020 item-No.: 123021438
approved
dealer
New in: 1986
used
Seller: country1-de Gewerbe Dmitri Perfilov

Capacity: 630 ton Movable die stroke: 160 mm. Max. upsetting ram stroke: 350 mm. Upsetting ram workssroke: 230 mm. Upsetting ram return stroke with close die:110 mm. Distance between upsetting ram and dies Stroke forward: 125 mm. Ram stroke per min.: 40 Die dimension: 560x200x590 mm. Main drive motor power: 35 kW Overal dimension: - floor space: 5000 x 3230 mm. - height above floor level: 2370 mm. Weight: approx. 55,5 t.

Category: presses
Updating date: 14.01.2020 item-No.: 123020481
approved
dealer
New in: 1963
used
Seller: country1-de Gewerbe Dmitri Perfilov

Capacity: 800 ton Movable die stroke: 180 mm. Max. upsetting ram stroke: 380 mm. Upsetting ram workssroke: 250 mm. Upsetting ram return stroke with close die: 130 mm. Distance between upsetting ram and dies Stroke forward: 140 mm. Ram stroke per min.: 35 Die dimension: 590x220x660 mm. Main drive motor power: 40 kW Overal dimension: - floor space: 6300 x 3900 mm. - height above floor level: 2850 mm. Weight: approx. 81 t.

Category: presses
Updating date: 14.01.2020 item-No.: 123020483
approved
dealer
New in: 1966
used
Seller: country1-de Gewerbe Dmitri Perfilov

Capacity: 1250 ton Max. diam. of workpiece,mm 140 mm Movable die stroke: 220 mm. Max. upsetting ram stroke: 460 mm. Upsetting ram worksstroke: 310 mm. Upsetting ram return stroke with close die: 170 mm. Distance between upsetting ram and dies Stroke forward: 180 mm. Ram stroke per min.: 30 Die dimension: 700x260x820 mm. Main drive motor power: 75 kW Overal dimension: - floor space: 6400 x 4365 mm. - height above floor level: 3340 mm. Weight: approx. 135 t.

Category: presses
Updating date: 14.01.2020 item-No.: 131590827
approved
dealer
New in: 1985
used
Seller: country1-de Gewerbe Dmitri Perfilov

New approx. 1985 Capacity: 400 ton Movable die stroke: 125 mm. Max. upsetting ram stroke: 290 mm. Upsetting ram workssroke: 190 mm. Upsetting ram return stroke with close die:60 mm. Distance between upsetting ram and dies Stroke forward: 100 mm. Ram stroke per min.: 50 Die dimension: 450x160x480 mm. Main drive motor power: 21 kW Overal dimension: - floor space: 4330 x 3150 mm. - height above floor level: 1860 mm. Weight: approx. 36 t. - Subject to prior sale - - With the right for shorthand, technical mistakes and typos, not-binding - We remain at your disposal for any question you may have.

Category: presses
Updating date: 14.01.2020 item-No.: 144604877
approved
dealer
New in: 1978
used
Seller: country1-de Gewerbe Dmitri Perfilov

Capacity: 630 ton Movable die stroke: 160 mm. Max. upsetting ram stroke: 350 mm. Upsetting ram workssroke: 230 mm. Upsetting ram return stroke with close die:110 mm. Distance between upsetting ram and dies Stroke forward: 125 mm. Ram stroke per min.: 40 Die dimension: 560x200x590 mm. Main drive motor power: 35 kW Overal dimension: - floor space: 5000 x 3230 mm. - height above floor level: 2370 mm. Weight: approx. 55,5 t.

Category: presses
Updating date: 14.01.2020 item-No.: 144586720
approved
dealer
New in: 2017
used
Seller: country1-de Gewerbe Dmitri Perfilov

Capacity: 250 ton Movable die stroke: 100 mm. Max. upsetting ram stroke: 220 mm. Upsetting ram workssroke: 140 mm. Upsetting ram return stroke with close die: 60 mm. Distance between upsetting ram and dies Stroke forward: 75 mm. Ram stroke per min.: 63 Die dimension: 350x140x380 mm. Main drive motor power: 19 kW Overal dimension: floor space: 3875 x 3250 mm. - height above floor level: 1526 mm. Weight: approx. 55,5 t. YOM: 2017 – general overhaul

Category: presses
Updating date: 06.12.2019 item-No.: 36818496
approved
dealer
New in: 1992
used
Seller: country1-uk ERS MANAGEMENT LTD
Price: 25.000 €

Schuler MRH horizontal coin minting presses are used exclusively in the processing of round blanks. With cycle times of up to 800 strokes per minute, this MRH press series is especially well suited for high volume minting of coins. The small number of coin-specific change parts ensures fast changeover times and broad flexibility of application. force 1000 kN Number of strokes:350-800/min Strock of a pusher 7 mm Overall dimensions 3020x1800x1750 Weight 3800 kg appointed boot device

Category: presses
Updating date: 06.04.2020 item-No.: 145088690
approved
dealer
New in: new
Seller: country1-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

pressure: 22 tstroke: 200 mmflat steel: 120 x 15 mmworking feed: 8,0 mm/secreturn speed: 30,0 mm/minwork height max.: 925 mmtable:: 630 x 1100 mmtotal power requirement: 1,5 kWmotor: 400 Volt 50 Hzweight: 790 kgrange L-W-H: 2450 x 1200 x 920 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 06.04.2020 item-No.: 145093512
approved
dealer
New in: new
Seller: country1-de Plum & Partner Werkzeugmaschinen GmbH
Location: Auslieferungslager

pressure: 22 tstroke: 200 mmtable-size: 630 x 1100 mmbending capacity - flat iron: 120 x 15 mmtable height over floor: 925 mmquantity of oil: 45 lmotor: 1,5 kWweight of the machine ca.: 530 kgdimensions of the machine ca.: 0,86 x 1,1 x 1,07 mCE signed: Central lubrication with hand pump: Conical index bolts H = 120 mm ( patented ): 2 Stück/piecesMillimeter readout for movable punches: Foot pedal: Side stop: 500 mmHydr. horizontal bending press with below cylinder in order not to hinder the course of work, 2 speeds for adjustment, stroke regulation with sensitive electric limit switches and graduated millimeter rule, patented tool taper. The machine is in the following sizes obtainable: pressure from 22 until 110 t, stroke from 200 until 330 mm.Options: Wide range of tools for each purpose.Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - th ...

Category: presses
Updating date: 06.04.2020 item-No.: 145088771
approved
dealer
New in: new
Seller: country1-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

pressure: 22 tstroke: 200 mmflat steel: 120 x 15 mmworking feed: 8,0 mm/secreturn speed: 30,0 mm/minwork height max.: 925 mmtable:: 630 x 1100 mmtotal power requirement: 1,5 kWmotor: 400 Volt 50 Hzweight: 630 kgrange L-W-H: 900 x 1200 x 920 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 06.04.2020 item-No.: 145088866
approved
dealer
New in: new
Seller: country1-de A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

pressure: 40 tstroke: 250 mmflat steel: 120 x 25 mmworking feed: 8,0 mm/secreturn speed: 30,0 mm/minwork height max.: 950 mmtable:: 625 x 1100 mmtotal power requirement: 4,0 kWmotor: 400 Volt 50 Hzweight: 900 kgrange L-W-H: 1200 x 1150 x 950 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 14.01.2020 item-No.: 130602798
approved
dealer
New in: 1961
used
Seller: country1-de Gewerbe Dmitri Perfilov

Max. clamping force: 800 ton Max. forging force: 800 ton Nominal rod diameter: 100 mm Total stroke: 380 mm Strokes per minute: 35 Die dimension: -Length: 550 mm -Width: 210 mm Height: 660 mm. Main motor: 40 kW Weight: approx. 83,1 t.

Category: presses
Updating date: 20.02.2020 item-No.: 145170740
approved
dealer
New in: 1962
used
Seller: country1-ua ERS MANAGEMENT LTD
Location: WC2R London
Price: 50.000 €

- The largest diameter of the workpiece, mm 90 - The maximum diameter of the planted flange, mm 120 - Rated force of the landing slide, kN 6300 - The force perceived by the clamping slide with closed dies, kN 6300 - stroke of the landing slider, mm 350 - The stroke of the landing slide after closing the dies, mm 230 - The frequency of continuous idle slider per minute, not less than 42 - Power of the electric motor 45 - Dimensions, mm length 4835 width 3450 height 2880

Category: presses
Updating date: 05.04.2020 item-No.: 138845369
approved
dealer
New in: new
Seller: country1-uk BRMACHINERY TRADING LP
Price: 18.000 €

Nominal force, 630 ton.Nominal working pressure, MPa 20Max.strokeofhydraulicramofmain cylinder, mm1000 Variablespeed of hydraulicramofmain cylinder, mm/secAt idle stroke 20—30At working stroke 1,2—2,5Ar return stroke 30—45Distancebetweenhydraulicramfaceand stop transverse beam, mm 500-4000Movementspeed of stop transverse beam, mm/sec. 70Max.diameter of workpiece, mm 1600Total power, kW 18,5Overalldimension, mmLength 11 000Width 3000Height 3280Heightabove the floor, mm 2865Mass , kg 29 450

Category: presses
Updating date: 06.11.2019 item-No.: 125694859
approved
dealer
New in: 1983
used
Seller: country1-uk ERS MANAGEMENT LTD

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Category: presses
Updating date: 18.02.2020 item-No.: 145130999
approved
dealer
New in: 1991
used
Seller: country1-ua ERS MANAGEMENT LTD

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Category: presses
Updating date: 13.02.2020 item-No.: 144988358
approved
dealer
New in: 1985
used
Seller: country1-ua ERS MANAGEMENT LTD
Location:
Price: 55.000 €

Capacity, ton 800 Movable die stroke, mm 180 Max. upsetting ram stroke, mm 380 Upsetting ram workstore, mm 250 Upsetting ram return stroke with closed dies, mm 130 Distance bentween upsetting ram and dies stroke forward, mm 140 Number of ram strokes per minute 35 Die dimensions, mm 590 x 220 x 660 Electric motor power, kW 40 Dimensions: mm 6300 x 3900 x 2850 Weight: kg app. 80800

Category: presses
Updating date: 12.10.2019 item-No.: 107165624
approved
dealer
New in: 1985
used
Seller: country1-uk BRMACHINERY TRADING LP
Location: Kaunas
Price: 22.000 €

Horizontal forging machine(Upsetter) Stanko Ryazan V Manufactured by Tyazhpressmash (Russia) Year of manufacture 1985 Capacity, ton 400 Movable die stroke, mm 125 Max. upsetting ram stroke, mm 290 Upsetting ram work stroke, mm 190 Upsetting ram return stroke with closed dies, mm 60 Distance between upsetting ram and dies stroke forward, mm 100 Number of ram strokes per minute 50 Die dimensions, mm 450 x 160 x 480 Electric motor power, kW 21 Machine dimensions, mm 4330 x 3150 x 1860 Machine weight, kg app. 36000 price 22000 EUR

Category: presses
Updating date: 02.03.2020 item-No.: 123950295
approved
dealer
New in: 1985
used
Seller: country1-uk ERS MANAGEMENT LTD
Price: 26.000 €

Capacity, ton 400 Movable die stroke, mm 125 Max. upsetting ram stroke, mm 290 Upsetting ram work stroke, mm 190 Upsetting ram return stroke with closed dies, mm 60 Distance between upsetting ram and dies stroke forward, mm 100 Number of ram strokes per minute 50 Die dimensions, mm 450 x 160 x 480 Electric motor power, kW 21 Machine dimensions, mm 4330 x 3150 x 1860 Machine weight, kg app. 36000

Category: presses
Updating date: 06.04.2020 item-No.: 145092361
approved
dealer
New in: 1965
used
Seller: country1-de Teutenberg Maschinen GmbH & Co.KG
Location: Willich

Strechting power: 50 tomaterial length: 1800 bis 9150 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHYDRAULICALLY STRETCH STRAIGHTENER Constr. Truninger Stretching force: 50 to. with turning head Stretching length: min. 1800 mm + 500 mm stroke max. 9150 mm + 500 mm strokeThe machine is suitable for stretch straigthening of round-, profile- and tube material.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: presses
Updating date: 21.05.2019 item-No.: 77733340
approved
dealer
New in: 1975
used
Seller: country1-by Kipling Holding

HORIZONTAL FORGING UPSETTER Tyazhpressmash B1139 800t Tech data: Nominal effort 800 tons Stroke of moving matrix 180 mm Full stroke of extruding slider 380 mm Working stroke of extruding slider 250 mm Back stroke of extruding slider, matrixes are closed 130 mm Distance between extruding slider and matrixes 140 mm Slider strokes 33 per min Matrix dimensions, mm - length 590 mm - width 220 mm - height 660 mm Main drive 40 kW Overall dimensions 5800x3700x2330 Weight of machine 80 tons

Category: presses
Updating date: 12.09.2019 item-No.: 140620302
approved
dealer
New in: 1983
used
Seller: country1-lt SCG, uab
Location: 37106 Panevezys, Klaipedos st. 75

Manufactured by Tyazhpressmash Year of manufacture 1983 Nominal capacity, ton 250 Movable die stroke, mm 100 Max. upsetting ram stroke, mm 220 Upsetting ram work-stroke, mm 140 Upsetting ram return stroke with closed dies, mm 60 Distance between upsetting ram and dies stroke forward, mm 75 Number of strokes per minute 63 Die dimensions, mm 350 x 140 x 380 Electric motor power, kW 19 Machine dimensions, mm 3875 x 3250 x 1526 Machine weight, kg 22300 The upsetter is in nice condition. Machine is fully complete.

Category: presses
Updating date: 16.03.2020 item-No.: 145526198
approved
dealer
New in: 1978
used
Seller: country1-ua ERS MANAGEMENT LTD

with vertical matrix connector Max. work-piece diameter: 140 mm Max. diameter of upset flange: 180 mm Nominal force of upset slide: 12500 kN Force on clamping slide with dies closed: 12500 kN Stroke of: -Upset slide: 460 mm -Upset slide after closing of dies: 310 mm Number of continuous slide strokes per minute: at least 32 Electric motor power: 75 kW Machine dimensions: -Length: 8035 mm -Width: 4800 mm -Height: 3575 mm Machine weight: 140 tons

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)