We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,027 used machines on RESALE, but how to find them? Machine Search
used
Consists of: Tetra Multi Shrink, Tetra Pak TMS 67
used
Consists of: Tetra Multi Shrink, Tetra Pak TMS 72
used
Decorative holding card TMCC
used
Time relay, synchronous motor actuated PAGUS TM10 TPE 6-35-1337-65 0 - 20 sec motor: 220 V AC, 50 Hz Relay: 220 V AC, 50 Hz Switching capacity: 250 V AC, 2 A / 250 V DC, 0.1 A New ! Dimensions: 205 x 110 x 125 mm
used
Temperature transmitter, 5 pieces ENDRESS + HAUSER TMT182 TMT182-B41BA iTEMP® HART PT100/4w/0 set temperature range: 1x 0 - 100 °C / 1x 0 - 120 °C / 1x -50 - 50 °C / 2x -50 - 60 °C Input: 11,5 - 30 V DC 23 mA Output: 4 - 20 mA New, with documents ! Dimensions ( temperature transmitter ): 44 x 44 x 20 mm Dimensions ( packaging ): 325 x 220 x 200 mm
used
Display, reading TME MB2001 MB2001-400 Operating voltage: 220 V AC 50 Hz output: 4 - 20 mA 2 changeover for panel mounting: 90 x 43 mm New ! Dimensions: 160 x 96 x 48 mm
used
Turbomolecular drag pump with drive electronics, junction box and fan PFEIFFER VACUUM TMH 071 Y P N PM 103 794 AT S: 33 l/s n,f: 90000 rpm at 1500 Hz drive electronics: TC 100 PM C01 692A Input: 24 V DC, 4.6 A Output: 3x 0 - 24 V 6.5 A 0 - 1500 Hz junction box: TCS 010 PM 051 460 AU Fan: PM Z01 253 G 24 V DC used, tested ! Dimensions: 260 x 145 x 185 mm
used
Motor roller, drive roller, conveyor belt motor, drum motor INTERROLL TM323 Drum diameter: Ø 335 mm Drum length: 600 mm motor : 4.0 kW 220 - 240 / 380 - 415 V 3AC 50 Hz Belt speed: 2.5 m/s Shaft diameter: Ø 35 mm New ! Dimensions: 950 x 315 x 315 mm
used
Delta drill bit with internal cooling SANDVIK TM411.5-207630 diameter: Ø 15.25 mm 420279016 mount: Ø 32 mm K20 New ! Dimensions: 185 x 32 x 32 mm
used
Delta drill bit with internal cooling SANDVIK TM411.5-207630 diameter: Ø 15.25 mm 420279016 mount: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm
used
Delta drill bit with internal cooling SANDVIK TM411.5-207569 diameter: Ø 25.25 mm 420279011 K20 mount: Ø 32 mm New ! Dimensions: 185 x 32 x 32 mm
used
Turbomolecular pump ATH1600M part nimber 112745 of magnetic lecvtation. Few hours of operation.
used
Delta drill bit with internal cooling SANDVIK TM411.5-207630 without delta cut diameter: Ø 15.25 mm 420279016 mount: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm
used
Delta drill bit with internal cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Mount: Ø 32 mm New ! Dimensions: 185 x 32 x 32 mm
used
Delta drill bit with internal cooling SANDVIK TM411.5-207569 diameter: Ø 25.25 mm 420279011 K20 mount: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm
used
Delta drill bit with internal cooling SANDVIK TM411.5-207569 diameter: Ø 25.25 mm 420279011 K20 mount: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm
used
Delta drill bit with internal cooling SANDVIK TM411.5-207629 diameter: Ø 12.25 mm 420279013 K20 mount: Ø 32 mm New ! Dimensions: 170 x 32 x 32 mm
used
Delta drill bit with internal cooling SANDVIK TM411.5-207628 diameter: Ø 10.25 mm 420279012 K20 mount: Ø 32 mm New ! Dimensions: 160 x 32 x 32 mm
used
Delta drill bit with internal cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Mounting: Ø 32 mm used, tested ! Dimensions: 180 x 32 x 32 mm
used
AUTOMATIC DOUBLE END TENONER Type GABBIANI TMN 56 . second hand max.opening mm. 3100 min. opening mm.160 max. useful height mm.120 variable feed rate from 4 to 18,5 mt/min Equipped with 3+3 working units - 1+1 scoring unit . motor power HP 1.3 - 1+1 hogging / milling unit . motor power HP 5,5 - 1+1 milling unit . motors power HP 5,5 volt. 380/50
new
ABB circuit breakers base Tmax T4N250 new part
used
M. No.: 91-1101
used
Status: New Manufacturer: Pfeiffer Type: TMH 064 Mod.-Nr.: PM P02 366 Remark To operateonly with appropriate pre pump and control. delivery time: on request; ready for use
used
Status: As good as new Manufacturer: Pfeiffer Type: TMH 064 Model No.: PM P02 366 Comment To operate only with appropriate backing pump and control. Shipping time: On request; ready for operation
used
Stock# U2301-1 Second hand stainless steel contact parts twin shaft planetary dissolver by Molteni type TM5 RP.SV. Mixer has stainless steel jacketed mixing pan with internal diameter 207 mm x depth 213 mm. Total volume of pan is 7 l, working volume about 5 l. Mixing pan has side wall bottom discharge outlet. Mixer has two agitators with toothed discs and one wall scrapper. Toothed discs have diameter 100 mm and are driven by vari speed gearbox and two speed el. motor 1.75/1.4 kW, 2800/1400 rpm, 380 V, 50 hz, in EEx-d II B T4. Working rotation of disc agitators manually adjustable in range from 300 up to 4800 rpm. Wall scrapper is driven by el motor 0.26 kW, 1360 rpm, 220/380 V, 50 hz (design EEx-d II B T5) through reducer with ratio i= 44.77, what gives output rotation at 32 rpm. Agitators are risen by hydraulical device driven by el. motor 0.26 kW, 1360 rpm, 220/380 V, 50 hz, EEx-d II ...
used
Sell a Thermovac TM21 vacuum meter with high vacuum sensor according to Pirani. (measuring range 500 bar to 1000mBar)
used
Our Leybold TMP1100C Turbovac is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty Leybold TMP1100C Turbovac pump wants: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty
used
Our Leybold TMP1000 Turbovac is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty Leybold TMP1000Turbovac pump wants: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty
used
Kreuter Chocolate temperer Model: TMK100 Serial: 7906/91 Refurbished by Wolf in 2013, 100Kg chocolate temperer, adjustable temp controls, agitation with scrape surface, with all manuals, 3Ph
used
1 VIRGINO RIMOLDI roll slitting machine type TMF RN160AV. Machine used to obtain tapes of different widths, whether the fabric is wrapped "in line" or on the bias. Cutting system with motorized disc blade and manual feed. The fabric roll is supported by a shaft that enters the cardboard tube where the fabric is rolled on. The shaft is motorized and its rotation is synchronized with that of the disc blade, ensuring a clean and precise cut. Device for sharpening the disc blade. Width of the strips to cut: from 20 to 130 mm. Maximum width of the fabric roll: 1,600 mm. Maximum cutting diameter 230 mm. Diameter of the roll holder bar: 45 mm (for carton tubes of inside diameter 46 mm and outside diameter 50 mm).
used
Leybold Turbovac TMP 600C with CF DN160 inlet flange.
used
specifications: - Nominal /permanent temperature can be selected up to approx. 1150 ° - digital temperature setting - Timer - Interior size approx. W 250 x H 190 x D 400 mm - Loading by front door - Opening width of the front door B 240 x H 190 mm - Drive 400 V / 7.5 kW - Base H 800 mm - Space requirement approx. W 900 x H 1450 x D 1100 mm - Weight approx. 120 kg
used
Ball mill Drum mill Wet grinding body Mill clinked TMNP17/2 with engine and adjustment gearbox used Manufacturer: VEB Type: TMNP 17/2 Year: 1984 Drum length approx. 2010 mm, walled out inside with wear-resistant clinkers Drum Ø ca. 1700 mm Wall thickness approx. 17 mm Drive gear Ø approx. 870 mm x 100 mm Opening approx. Ø 220 mm / 450x450 mm with coaster block gearbox and approx. 15 kW electric motor The substructure can be offered as a steel structure by us Changes and errors in the technical data, information and prices as well as intermediate sale reserved.
used
faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1190 mm Control: Siemens type: 840C max. ram stroke: 1250 mm Tool changer: 12 Pos Table load: 9000 kg cross rail - adjustment: 800 mm turning speeds: 2,5-250 U/min rapid traverse: 4 m/min total power requirement: 55 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 3,95x3,6x5,56 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
cutting range: 90°: 90 mm cutting range: 45°: 75 mm Saw blade diameter: 315 mm Table dimensions: 800 x 500/400 mm Saw blade: 30 mm machine weight ab.: 45 kg dimensions: 850 x 600 x 430 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Drum magnet, drum magnetic separator, magnetic drum, magnetic filter, magnetic roller, magnetic separator, metal detection, magnetic separator, metal-free, plastic, blasting material, wood chips, cable granules, plastic granules, recycling Drum magnet - magnetic separator in the housing incl. separating plate, drive and gearbox + high-quality stainless steel execution + Separating plate for separation + Shaft trestle for fixing the fixed shaft + Drive: three-phase geared motor from Gemoteg / SevaTec / SEW possible + Standing bearing units + Output "magnetic" / "non-magnetic" Dimensions: L: 420mm W: 280mm H: 380mm Inlet: 365x80mm + high-quality stainless steel execution + Scraper plates / webs for separation Drum: Ø 220x400mm On request, the appropriate housing, standing bearing unit, drive, etc. can be obtained from us. Our core competence lies in providi ...
used
Drum magnet, drum magnetic separator, magnetic drum, magnetic filter, magnetic roller, magnetic separator, metal detection, magnetic separator, metal-free, plastic, blasting material, wood chips, cable granules, plastic granules, recycling Drum magnet - magnetic separator in the housing incl. separating plate, drive and gearbox + high-quality stainless steel execution + Separating plate for separation + Shaft trestle in the form of a bearing unit + Standing bearing units Dimensions: L: 800mm W: 800mm H: 820mm Inlet: 600x250mm Drum: Ø 500x600mm Our core competence lies in providing the customer with exactly what he really needs. Together with our customers, we develop customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, c ...
new
turning diameter over bed: 760 mm turning diameter over slide rest: 520 mm turning length: 4000 (1,5m,2m,3m,5m, 6m) mm turning dia. in gap: 950 mm bed width: 560 mm spindle nose: 11 spindle bore: 132 mm transmission ratio: 3 spindle turning speed - stepless: 12,5-100, 50-415,150-1250 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 180 mm thread - inch: 60 - 1/6 inch. thread - module: 0,125 - 45 Whitworth-thread: 240 - 2/3 DP number of feeds: 150 mm/U rapid traverse longitudinal: 3800 mm/min longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 410 mm upper slide-adjustment: 150 mm rapid traverse of cross-rail supports: 1900 mm/min diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 15 (18,5) kW weight of the machine ca.: 5800 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. ...
used
Battenfeld TM3500/1900 Injection moulding machine Used battenfeld machine for sale, machine is unplugged, but it was in good working condition
used
Stock number U2387-1 Used mixing station for liquids. Station consist of vertical stainless steel mixing tank with total volume 1300 l. Internal diameter 1170 mm x length of straight side of wall 1140 mm. Bottom elipsoidal, with central discharge outlet. Tank is mounted on three stainless steel legs, on tension cells. On side walls there are welded four baffles. Mixing is provided by homogenizing agitator by IKA (DE) model Turrax UTC TMP 150 / 2KT, driven directly by 11 kW, 2915 rpm, 380/660 V, 50 hz. Length of the shaft 900 mm x diameter of mixing die 150 mm. Agitator is mounted on stainless steel supporting frame. Discharge from tank is provided by sinusoidal stainless steel contact parts pump by Masosine Process Pumps model SP 25, working on pressure up to 15 bar. Working rotation up to 600 rpm. Pump is driven by 2.2 kW, 1400 rpm, 220-380 V, 50 hz. Working rotation of drive up to 2 ...
new
Main characteristics: For grinding chilled meat; Floor model; AISI 304 stainless steel construction; With transmission system at work; Protective plate for easy loading and plunger to push the material; Solid stainless steel auger with locking mechanism; Unger system – 5 instruments; Technical data: Productivity: 1100 kg./hour; Motor power: 5.5 kW (standard motor is 4kW); Neck: 114 mm.; Dimensions L / W / H: 450 / 860 / 1100mm.; Weight: 121 kg. The price includes a complete set of grinding tools;
used
used
O-M LTD. CNC Vertical Boring Mill FANUC 16T-A CNC CONTROLS, RETROFIT 1994 CAPACITY: TABLE DIAMETER 4000mm MAXIMUM TURNING DIAMETER 7000mm MAXIMUM TURNING HEIGHT 2900mm MAXIMUN HEIGHT UNDER RAIL 3000mm TABLE WEIGHT CAPACITY 45400kg VERTICAL RAM TRAVEL, Z-AXIS 1500mm HORIZONTAL TRAVEL OF RAM, X-AXIS 2550mm TABLE SPEEDS RANGE .55-40 RPM TABLE SPEEDS 16 STEPS FEED RANGE VERTICAL RAM HEAD 0.003-.6 IPR RAPID TRAVERSE, HORIZONTAL HEAD 49 IPM RAPID TRAVERSE, CROSS RAIL 12 IPM RAPID TRAVERSE, COLUMN 21 IPM MAXIMUM TORQUE 58,000 LB/FT EQUIPPED WITH: FANUC 16T-A CNC CONTROLS (RETROFIT 1994) 4000mm T-SLOTTED TABLE WITH 4-TOP JAWS OPENSIDE ADJUSTABLE COLUMN VERTICAL OCTAGONAL RAM ON CROSS RAIL COOLANT CHIP GUARDS MAYFRAN CHIP CONVEYOR 50 HP MAIN MOTOR NOTE: MACHINE IS UNDER POWER FOR INSPECTION. WELL MAINTAINED MACHINE IN EXCELLENT CONDITION! RETROFIT WITH FANUC 16T-A CNC ...
used
Semi-automatic bridge-type granite and marble cutting machine, year 1998, works perfectly, sold due to company extinction
used
Hurco TM8 Type of CNC Hurco ULTIMAX Turning length 483 mm Turning Ø 256 mm Ø above the bed 548.6 mm Ø above transversing slide 320 mm Length between centers 584.2 mm X-axis 203.2 mm Z-axis 508 mm Spindle bore 61 mm Number of turrets 1 Number of tools on turret 10 Number of rotating tools 10 Turning speed 4800 rpm Spindle motor power 11.2 kW Tailstock
used
This HURCO TMX8MYSi Lathe was manufactured in the year 2018 and has 8326 hours. It is equipped with a HURCO control unit. The machine has a spindle speed of 4500 rpm.
used
This HAAS TM2-HE vertical machine center was built in 2007. It is equipped with a Fanuc based control unit and has 3 axis. The machine has an SK 40 taper.
used
This Hurco TM8i Lathe was manufactured in the year 2018 and has 7006 production hours, of which 1696 spindle hours. It is equipped with a HURCO control unit. The machine has a spindle speed of 4000 rpm.
used
We are an authorized SUBARU dealer in Poland, In addition, we have over 30 years of experience in the trade of cars, trucks and specialized equipment. Please visit our official sites to confirm our authenticity! gruchel.subaru.pl / mgc.pl / facebook.com/p/MGC-Auto-Centrum-Subaru-100063910875053/ = \ For sale directly from the port of Sweden Varberg, we offer a powerful Svetruck TMF 12/9 forklift truck with an unladen weight of 50 Tons and a maximum load capacity of 12t lifted up to 7.5 meters. Forklift / Reach stacker from new to one owner in the Port dealing with unloading and loading of wooden logs on ships. The price includes dismantling the stroller into parts to prepare it for transport. (Gripper separately, arm separately, carriage separate) - - We also purchased an interchangeable arm from ELME from 2004, thanks to which this trolley can be converted into a Reach ...
used
Jungheinrich scissor lift truck, load capacity up to 1000 kg