hole tronic used for sale

We have for sale: 1 Holec SVS switchgeaar 17,5kV 800Amp busbar 3 motorized breaker feeders with Stucke protection relays 1 x fused loadbreak switch

Holex outdoor micrometer 300-400mm measuring range.

torque wrench, torque tool -Manufacturer: Holex Hoffmann, torque wrench 4 -20 Nm -Art.No.: 657277 26 -Torque: 4 - 20 Nm / 40 - 80 lbf.in -Shot: 9 x 12 mm -Transport dimensions: 270/50/H50 mm -Weight: 0.5 kg

amount: 9 STK weight: 5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: HOLEX -Type: SK 50-3/32-73 -Hoffmann Group No.: 302 460 50 -Weight: 3.4 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: HOLEX -Type: SK 50-2/20-63 -DIN: 2080 -No.: 0108016995 -Weight: 2.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Manufacturer: Holex, soft top jaw set 3-piece 315 -Type: 313310-315 -Width: 35 mm -Dimensions: see photo technical. drawing -Dimensions: 145/105 / H55 mm -Total weight: 5.2 kg

Tool holder, tool holder, milling holder, milling tool -Milling holder: HSK 63 holder, 7 pieces -Type: different versions see photos -Price/tax: complete -Transport dimensions. 470/100/H95mm -Weight: 8.8 kg

Vernier caliper, caliper, vernier caliper -Manufacturer: Holex, digital caliper -Art.No.: 41 5530 2000 -Measuring range: 0-2000 mm -Measurement accuracy: 0.01 mm -Dimension case: 2340/300/H60 mm -Weight: 9.6 kg

Dial gauge, zero adjuster, zero adjuster, zero adjuster -Manufacturer: Holex, zero adjuster type 359085 -Measurement accuracy: 0.01mm -Box dimensions: 165/120/H60 mm -Weight: 1.5 kg

Vernier caliper, caliper, vernier caliper, depth caliper -Manufacturer: Holex, digital depth caliper -Art.No.: 41 8540 300 -Measuring range: 0-300 mm -Measurement accuracy: 0.01 mm -Quantity: 1x caliper available -Dimension case: 400/135/H30 mm -Weight: 0.7 kg

Vernier caliper, caliper, vernier caliper -Manufacturer: Holex, digital caliper -Art.No.: 41 5528 800 -Measuring range: 0-300 mm -Measurement accuracy: 0.01 mm -Quantity: 1x calipers available -Dimension case: 1060/280/H50 mm -Weight: 3,3 kg.

Vernier caliper, caliper, vernier caliper -Manufacturer: Holex, digital caliper -Art.No.: 41 2811 300 -Measuring range: 0-300 mm -Measurement accuracy: 0.01 mm -Quantity: 2x calipers available -Price per piece -Dimension case: 465/180/H30 mm -Weight: 1.0 kg/pc.

Approx. Onsite Dimension. (l x w x h): 330 x 220 x 50 mm, weight approx.: 5 kg

Description: Quick-change insert set without safety slip clutch, 9 pieces, Thread range: M6 - M20, Description: Suitable for, especially with detachable tapping chucks, Note: Inserts with a slipping clutch are supplied with a torque setting for machining steel (Rm 600 - 800 N/mm2). The setting can be adjusted by adjusting the nut. weight approx.: 5 kg, Approx. Onsite Dimension. (l x w x h): 300 x 300 x 100 mm

Description: Inventory of hammers, Allen keys, files, screwdrivers, open-end wrenches, pliers, compasses, brushes, taps, twist drills and collets on Fridays Approx. Onsite Dimension. (l x w x h): 700 x 600 x 950 mm, weight approx.: 100 kg

Description: With a stock of screwdrivers, pliers, Allen keys, nuts, open-end wrenches, files and a manual torque wrench. Attention: paints, varnishes and liquids are not included in the scope of delivery! Approx. Onsite Dimension. (l x w x h): 750 x 600 x 1,000 mm, weight approx.: 100 kg

Description: Consisting of 2 pieces Measuring range: 16 - 20 mm Incl. extension and measuring rings Approx. Onsite Dimension. (l x w x h): 400 x 150 x 70 mm, weight approx.: 5 kg

Working length: 3.200 mm Machine is equipped with: -3 drilling units from below with 3 spindle-head - 2 holders from above -1 pressure cylinder on the side The control was by the customer through a control, serial: Siemens,. newer built; replaced.

Power: 22 HP, 2880 min-1 EMB electric motors AG Switzerland Stainless steel housing Hopper with feeding screw Dimensions: LWH = 400x400x1300mm (without screw) Weight: 300 kg

Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY < < < Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx)

Standard equipment; Ready

Deep hole boring machine - heavy duty deep hole boring machine Kramatorsk (Russia) KJ 1910 Year of manufacture 1986 Maximum boring diameter, mm 600 Maximum use of lenght mm 10000 (10 meters) Max 25 ton Machine in our warehouse in Northern Italy Center height over the bed, mm 670 Maximum work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000.. 10000 Work piece diameter range, mm: -in chuck of faceplate 200th.. 1100 -in open rest 400... 900 -in closed rest 200... 630 -in round rest 250... 550 Maximum work piece weight 25000 kg Range, 2 200 rpm spindle speeds Spindle diameter hole mm 700, Main motor power, kW 85 Counter rotation motor is 95kW Machine overall dimensions, mm 25550 x 3000 x 2290 Machine weight, kg 83000 Mimu machine tools (Italy) machine tools

Slot boring machine Scheer L x W x H: 70 x 60 x 140 cm Weight approx. 400 kg Built in 1975 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

The deep hole drilling machine have 6 spindles and is in very good condition, LIKE NEW! This can be like to inspect under pressure. On request we can send you more pictures. Number drill spindle 6 ELB and BTA drilling Min. drilling diameter 3 mm Max. drilling diameter 20 mm Max. drilling depth 1000 mm We see ourselves as a competent partner for downhole drilling, turning, milling and welding in paid labor. We will gladly make you an offer!

Pneumatically driven punching, Horizontally arranged. Pedicure Manufacturer: Meuleman Engineering BV Vosseboerweg 7 7683 SH Den Ham (Ov) Punching force 200kg Special price

pressure: 110 t : Ø 40x20 mm throat: 500 mm engine output: 9 kW no. of strokes: 28 Hub/min stroke max.: 80 mm weight: 3150 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with automatic working cycle, max. working width / stroke length of the oscillation 120 mm, drilling depth max. 80 mm, table inclination max. 20, tool clamping diameter max. 13 mm, drilling diameter max. 20 mm, spindle motor power 2.24 KW / volt. 380/50 Hz, spindle speed 9,000 rpm, oscillating motor power 0.75 KW, oscillation adjustable from 120 - 240 huebe per minute, pneumatic factory tension, 4 suction nozzles D=80 mm, space requirement - depth 1,000 mm, width 1,300 mm, height 1250 mm, weight 500 KG; Technically and visually in very good condition

Max punching force: 750 kN stroke over foot switch With range of tools as desired

Height of bed rail until mid-drilling: 315 mm Gr. On drill bit Ã?: 178,3 mm Bed length: 9400 mm Drilling depth approx.: 3150 mm Continuous feed range: 70-1750 mm / min Rapid traverse speed: 4.25 m / min Spindle box, bore: 62 mm Main spindle RPM: 180-1000 rpm Main spindle drive: 380 V, 15 kW Machine weight: 6.6 t

Mechanical punch with a punching force of 1000kN. tool holder for stamps up to 90 mm can be mounted on request. A wide range of stamps and dies is included in the scope of delivery.

Mixed lot of new and used deep hole drills gemaess list

Deep Hole Drilling Machines Kramatorsk KJ1910 used machine but very good mechanical condition. Machine can be inspected in our warehouse in Gussago BS (Italy) Deep hole boring machine - heavy duty deep hole boring machine Kramatorsk KJ 1910 Year of manufacture 1986 Maximum boring diameter, mm 600 Maximum use of lenght mm 10000 (10 meters) Max 25 ton Spindle diameter hole mm 700, Main motor power, kW 85 Counter rotation motor is 95kW Machine overall dimensions, mm 25550 x 3000 x 2290 Machine weight, kg 83000 Mimu machine tools (Italy) machine tools

Maximum punching force: 650 kN More performance data see nameplate or on request Inclusive range of punches and matrices

Size: 3,000 mm x 1,200 mm -no attacks -without pressing cylinders

right / left Number of spindles 4 Slide stroke 800 mm Drilling area in steel St-60 Full drilling dia. 15 mm Boring dia. 20 mm Drilling method Single-lip drill

Manufacturer: CW Kreher Olbernhau Year built: unknown (1985) Engines: Hole circle 2.2 kW (from above) Drill 3 kW (from untrn) Hole diameter: approx. 60 to 300 mm Max material thickness: 80 mm Drilling diameter: max. 100 mm Drilling ties: max. 100 mm Rotation speed: 4 steps, adjustment via V-belts Usage: cutting out blanks for shells, plates or similar round turning parts for turning

The machine is completely overhauled and is then as good as new! The machine gets a completely new electric satisam with our control system. Technical specifications Drilling process: ELB Number of drilling spindles: 1 Min. Drilling diameter 4 mm Max. Drilling diameter 30 mm Max. Drilling depth 600 mm with drilling diameter 4mm / with larger drilling diameters max. Drilling depth 1000 mm Max. Rapid traverse speed X + Z axis 4000 mm / min Max. Rapid traverse speed y-axis 2000 mm Travels X-axis horizontal approx. 700 mm Y-axis vertical approx. 300 mm Z axis designed for max. Drilling depth 1000 mm

Hole drum 6 mm (drum 3 mm soft) for de-stretching machine Baader 697. New and unused, ready to ship immediately.

Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY < < < Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx)

In-line hole drilling machine Scheer DB 4 L x W x H: 1500 x 1500 x 1900 mm Weight approx. 1000 kg Built in 1980 1 aggregate vertically up 1 aggregate horizontal - vertically pivotable The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Very good deep hole drilling machine TBT T10-500. with cooler Drilling area: Drilling diameter 2-10 mm Max. drilling depth 500 mm Drilling method ELB Infinitely variable speed up to 8000 rpm Tailstock with counter rotation Automatic filter for coolant system Magnetic chip conveyor Full enclosure of the machine.

Table top height: 910 mm Table top size: 700 x 380 mm Max drilling depth: 145 mm Max long hole length: 240 mm Height adjustment distance 135 mm Engine power: 1.5 kW Voltage: 400 V / 50 Hz Speed: 3,000 rpm Net weight: approx. 200 kg Suction nozzle: 100 mm Dm Dowel drilling device: Pitch 16, 22, 25, 32 mm with precision grid roller Driving equipment: Yes Frame stop 90°: pluggable Two-jaw chuck: up to 20 mm clamping range Hand eccentric tensioner: 1 piece 1 Lever control: Yes Measuring clock in handwheel: Yes Miter stop: Yes, double angle adjustment stop from 22.5° to 75° infinitely adjustable

TBT M1-4-320 4-Spindle deep hole boring machine, gundrilling interesting price Mimu Machine Tools (Italy) - Note: in our warehouse Mimu Machine Tools (Italy)

Description Universal CNC deep hole drilling machine from Degen suitable for tooling, fixture construction, training as well as mold making Travel 750x700x600mm Control SIMATIC OP17 Technical data Universal deep hole drilling machine DEGEN UTB 600 E X,Y manual Z, NC control Axes with digital display Drilling depth max. 900 mm max. drilling diameter 25 mm Spindle holder MK2 Spindle drive 2.6 kW Spindle speed max. 3000 rpm Table adjustment lengthways 750 mm Table adjustment Cross 700 mm Drilling unit vertical 300 mm Drilling swivel +/-20° Table area 650 x 1100 mm Table swivelling by 360° Table load max. 2000 kg 2 separate cooling systems - Spray mist (single-lip deep drills) - Drilling emulsion (spiral drilling) With accessory package and glass protection

Technical data Number of drill spindles: 3 Max. drill depth: 400 mm Drill capacity in steel: from diameter: 2 mm up to diameter: 10 mm Bore capacity in steel: up to diameter: 18 mm Bore capacity in cast-iron: up to diameter: 20 mm Centre height: 180 mm Spindle stroke: 700 mm Max. clamping length: 700 mm Table length: 1280 mm Table width: 420 mm Spindle speeds: number (steps): 3 from: 700 rpm up to: 6400 rpm Drill spindle feeds: from: 15 mm/min up to: 500 mm/min Rapid traverse:: 3 mm/min Voltage 50 Hz 3x: 420 Volt Power: 4 kW Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3450 mm Width: 900 mm Height: 1500 mm Various accessories: Coolant system

WEIBERT WJ-LB2 Long-hole drilling machine WEIBERT WJ-LB2 400V 2.2 KW ( 3 hp) n=2840 min. Drilling table size 600x320mm Drilling table height 870mm Drilling depth 245mm Drilling width 205mm Height adjustment 165mm Swivel ling unit swivel -45°/90°/+45° Machine table made of GREY ING! Manual adjustment with handwheel! AGGREGAT AND TABLE FROM MACHINE GREY! G&WJ-LB2 option: Dowel drilling device available with pitch 16-22-25 and 32mm G&WJ-LB-DÜBEL

Drilling capacity: 36 mm Drilling depth: 0 mm Spindle taper: 0   Number of drilling spindles: 0   MACH-id    3627 MAKE         IXION Auerbach TYPE           TL 1004 YEAR         2009 SPECIFICATIONS Drilling capacity    6 - 32 mm Drilling capacity steel Ø    6 - 32 mm Drilling capacity cast iron Ø    6 - 46 mm Spindle taper Mk    ISO 40 Power   7.5 kW Spindle speeds / ranges    4000 Rpm DIMENSIONS    Length    4000 mm Width      6600 mm Height      2300 mm Capacity X           &n bsp;    : 1000 Y                 ...

Smallest / largest hole diameter 2 / 50 mm Material diameter 32 / 150 mm Workpiece length 50 - 1100 mm Spindle speed range 13,000 - 45,000 rpm