hirschburger used for sale

Approx. Onsite Dimension. (l x w x h): 800 x 620 x 1,560 mm, weight approx.: 80 kg

Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 2,000 mm, weight approx.: 60 kg

Description: With 10 drawers without contents Approx. Onsite Dimension. (l x w x h): 710 x 740 x 1,330 mm, weight approx.: 60 kg

Description: With 5 shelves, height-adjustable without visible contents , Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 2,000 mm, weight approx.: 80 kg

Brand: HIROX Model: SH3000 Year of manufacture: 2011 Purchase price: 110 k€ Year of purchase: 2011 Description: Compact, powerful and easily transportable, this tabletop SEM bridges the gap between the world of optical and scanning electron microscopy. As easy to use as a video camera, the Hirox SEM is accessible to all. The intuitive graphical interface and its wide magnification range make it a real investigation tool that is both fast and very sophisticated for the visualisation and control of your samples. Control screen with auto focus, auto contrast and brightness, image rotation, measurements (dimensions, surfaces, angles)... This device is on sale as it is dual purpose with our other equipment. Characteristics : Dimensions LxWxH: 55x60x57 cm automatic pumping system primary pump turbo-molecular pump column optical system (source: tungsten filament) 15 n ...

Compressed air refrigeration dryer Hiross PG 0900 12 bar, 90 m3/min.

Compressed air refrigerant dryer Hiross PG 0900 12 bar, 90 m3/min.

Make: HIROSS Type: SLO920D02200X Power: 95 kW refrigerant: R407C 2 pcs. compressor Maneurop Compressor type: SZ175S4RA Price on request

Chiller Hiross Type: SBR 257 Refrigerant R407C Cooling capacity: 230 kW in very good condition

Co-ordinate Table HIRSCHMANN - DRO system HEIDENHAIN, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 400x240 mm, T-slots size: 10 mm, Number of t-slots: 4, Longitudinal travel x axis: 300 mm, Cross travel x axis: 200 mm

Used cold water set, in top condition cooling power about 250 KW, at 17/12 ° C, device with built-in freezer, and 2 circulation pumps, electronic hirus control, built circa 1998, system was switched to the refrigerant R 407 C about 8 years ago. With speed controlled liquefier/open-air fan. Plant was still in full operation until 6 months ago, was dismantled due to an increase in operations.

Code: 0806 Brand: HIRZT - ITALY Model: B 300 - CE Standard Automatic edge bander for pre-glued edges in strips or rolls: melamine, plastic laminates, veneer, etc . up to 3 mm thickness - CE Standard Composition: Motor V. 220 single-phase Pneumatic end cutting unit (shear) front and rear Blower with air filter - Power 440 W Trimming copying unit with adjustment from the outside - Motors 220 x 2 W - Trimmer speed rpm 10000 End cutting finishing unit with foot control N° 20 rollers inclined on the plane Feed motor 13 wheels V.200 single-phase - Speed 4,7 mt/min Max edge thickness mm 3 Panel thickness min/max 10/50 mm Min panel dimensions mm 70 x 140 Total absorption Kw 3,8 Digital thermometer 10-350 degrees Extensible front support Overall dimensions mm 1800 x 700 x 1300 h Weight kg 250

Industrial Ethernet Switch, Netzwerk Switch, Lan- Switch, Rail Switch -Hirschmann: RS20 Rail Switch -Abmessungen: 125/70/H130 mm -Gewicht: 0,4 kg

Coolling capacity: 1068 kW Year of manufacture: 2007 Type of refrigerant: R407С Options: Free Cooling Refrigerant circuit: 2 pcs. Compressors: 4 pcs. Bitzer ( screw ) Hydraulic module: 2 pcs. pump Number of fans: 20 pcs. Dimensions: 13,3 х 2,3 х 2,3 m. Weight: 13187 kg. Condition: very good Product quantity: 1 pcs.

Description Max operating pressure: 16 Bar Power: 1.27 Kw Gas type: R134a Gas weight: 0.400 Kg

A-travel: 220°, B-travel: 270°, z-travel: 200mm, W-travel: 540°, max. nominal load: 5kg, weight: 21kg.

Compressed air filters, fine filters -Connection: 2 inches -Number: 3x filters available -Price: per piece

Ethernet switch -compact, industry-compatible switch for mounting on top hat rails -Number: 10 pieces available -Price: per piece -Dimensions: 130/125/H70 mm -Weight: 0.5 kg

Ethernet switch -Type: RS30-1602O6O6SDAEHH06.0.02 -compact, industry-compatible switch for mounting on top hat rails -Number: 4 pieces available -Price: per piece -Dimensions: 130/125/H110 mm -Weight: 0.7 kg

Cooling capacity: 280 kW (12/7 — 35°C) Year of manufacture: 2013 Options: Free Cooling, Hydraulic module, lownoise Hydraulic module: 2 pcs. water pump, buffer tank Heat exchanger: Plate Refrigerant circuit: 2 pcs. Compressors: 4 pcs. Danfoss (scroll) Type of refrigerant: R410A Number of fans: 8 pcs. Dimensions: 2.22 x 4.20 x 1.65 m Weight: 2 635 kg Working hours: 8912/8312/8329 h Condition: Good

Clamping range Ø 15–160 mm Max. workpiece weight 15 kg Weight of the prism vise 3.0 kg

Offer 24078 Roller shutter cabinet with plastic roller shutters and contents Specifications: - 4 tool mounting frames inclined or straight to use - 132 possible tool slots - Space requirement W 1000 x D 500 X H 1950 / 2100 mm - Angle iron base with pallet truck can be driven underneath - 42 SK 40 tool holders, partly with clamped tools - 2 pieces 3 jaw chuck 80 + 100 mm - 1 piece 4 jaw chuck 160 mm - 88 plastic inserts - Cabinet is not lockable - Weight of cupboard approx. 130 kg - Weight of tools approx. 80 kg

Offer 24079 Specifications: - 3 tool mounting frames inclined or straight to use - 99 possible tool slots - Space requirement W 1000 x D 500 X H 1950 / 2100 mm - Angle iron base with pallet truck can be driven underneath - 56 SK 40 tool holders, partly with clamped tools - Miscellaneous clamping devices - 98 plastic inserts - Cabinet is not lockable - Weight of cupboard approx. 130 kg - Weight of tools approx. 80 kg

Description: Contents consisting of clamping elements, screw clamps Attention: the articles on the workbench are not included in the scope of delivery weight approx.: 120 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 760 x 900 mm

Description: Contents consisting of various hoses Approx. Onsite Dimension. (l x w x h): 950 x 600 x 1,950 mm, weight approx.: 70 kg

Description: Contents consisting of a vice (jaw width: 100 mm) and various screws, rings Approx. Onsite Dimension. (l x w x h): 950 x 600 x 1,950 mm, weight approx.: 70 kg

Description: Contents consisting of a chain hoist from the manufacturer EINHELL and various hoses Approx. Onsite Dimension. (l x w x h): 950 x 500 x 1,950 mm, weight approx.: 70 kg

Description: Contents consisting of hoses, pneumatic accessories Approx. Onsite Dimension. (l x w x h): 950 x 500 x 1,900 mm, weight approx.: 100 kg

Description: Contents consisting of various clamping jaws, motors, screws, eyebolts, tips, lathe clamping parts Approx. Onsite Dimension. (l x w x h): 950 x 500 x 1,900 mm, weight approx.: 100 kg

Description: Contents consisting of sanding discs, abrasives, sanding belts, locking pliers and an angle grinder from the manufacturer BOSCH Approx. Onsite Dimension. (l x w x h): 1,000 x 700 x 2,000 mm, weight approx.: 100 kg

Description: Maximum pressure 16 bar 230 V 50 Hz 3.50 A Refrigerant R22 Approx. Onsite Dimension. (l x w x h): 1,100 x 400 x 1,000 mm, weight approx.: 70 kg

Description: Last test 2018, payload/vertical load 1090 kg, total weight 2000 kg, body for cable drums, without drums, two axles, with vehicle registration document Approx. Onsite Dimension. (l x w x h): 4,000 x 2,000 x 1,400 mm, weight approx.: 1,300 kg

Technical data approx : - Worktop approx. W 1500 x D 750 mm - Worktop thickness approx. 40 mm - Table height approx. 860 mm - 3 drawers with roller bearings approx. W 445 x D 590 mm - Drawer heights 30 - 75 - 125 mm - 2 storage compartments approx. W 1330 x D 200 mm - Vice AJAX 120 mm -Lighting - Space requirement approx. W 1700 x H 2100 x D 820 mm - Weight approx. 180 kg

Description: Cabinet with sliding door 4 pieces cross beams with stations for Toolholder VDI 40 content consist of 40 pieces toolholder VDI 40 of misc. manufacturers like mimatic, WNT and Zürn 2 pieces driven tool holder (1x straight and 1x angled) suitable e.g. for Okuma lathes 38 pieces static tool holder with misc. Interfaces like boring bar, drill chuck and square cross Transportdimensions: 1.200 x 800 x 2.100 mm, ca. 240 kg Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,950 mm, weight approx.: 220 kg

Description: Cabinet with sliding door 4 pieces cross beams with stations for Toolholder VDI 40 content consist of 40 pieces toolholder VDI 40 of misc. manufacturers like Eppinger, Zürn, Garant 2 pieces driven tool holder (1x straight and 1x angled) suitable e.g. for Okuma lathes 38 pieces static tool holder with misc. Interfaces like boring bar, drill chuck and square cross Transportdimensions: 1.200 x 800 x 2.100 mm, ca. 240 kg Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,950 mm, weight approx.: 220 kg

Description: Cabinet with sliding door 4 pieces cross beams with stations for Toolholder VDI 40 content consist of 40 pieces toolholder VDI 40 of misc. manufacturers like mimatic, Eppinger, Zürn, Holex 2 pieces driven tool holder (1x straight and 1x angled) suitable e.g. for Okuma lathes 38 pieces static tool holder with misc. Interfaces like boring bar, drill chuck and square cross v Transportdimensions: 1.200 x 800 x 2.100 mm, ca. 240 kg Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,950 mm, weight approx.: 220 kg

Description: Cabinet with sliding door 3 pieces cross beams with stations for Toolholder HSK 63 & SK 40 content consist of 36 pieces toolholder HSK 63 misc. Interfaces like Weldon, Shrink fit, collet and milling arbor Transportdimensions: 1.200 x 800 x 2.100 mm, ca. 180 kg Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,950 mm, weight approx.: 160 kg

Description: Tool holder: SK 40 Approx. Onsite Dimension. (l x w x h): 420 x 200 x 120 mm, weight approx.: 15 kg

GeneralTurning-milling centre - partial hollow clamping device - drawtube ID 68 mm - C-axis and spindle brake (hydraulically) - upper compound slide with turning-/ milling spindle, reception HSK-A63, DIN 69893 with 3-fold Hirth-coupling 1°-Indexing to lock the spindle during turning operations - Y-axis - B-axis interpolating with hydraulically locking - tool magazine 1 x 60-fold, shelf magazine with tool changer and handling unit, additional 4 tool loading stations; Control: Sinumerik 840D powerline Technical DataDrive power (100% DC)13,2 kWDrive power (40% DC)22 kWTorque (40% DC)100 NmSpeed range20-12000 rpmB axis, slide 1Swivelling range+/- 120 degreeSlide 3Transverse stroke1500 mmRapid traverse Z36 m/minSlide 2Longitudinal stroke1400 mmTransverse stroke225 mmRapid traverse X24 m/minRapid traverse Z40 m/minSlide 1Longitudinal stroke1585 mmTransverse stroke550 mmY axis, vertic ...

Drilling and milling machine Skoda HCW2 Machine type: HCW 2-180 5/16m Year of construction: 2009 Manufacturer: Skoda Plzen, CZ Control: CNC840D-Powerline Country of manufacture: Czech Republic Freight basis: from storage location + VAT incl. Dismatling and loading Technical data Control Siemens 840 D Powerline Travel distances X-axis 15,000 mm cross-column Y-axis 5,000 mm headstock vertical Z-axis 1,300 mm support beam (RAM) - horizontal W-axis 1,000 mm quill stroke horizontal Machine table rotary table plate field: Length 3,500mm 3,780mm Width 3,000mm 8,000mm max. table load: 60 t Travel 2500mm (V-axis) Drilling/milling spindle Tool taper: ISO 50 Quill Ø 180 mm RAM cross section 450 x 450 mm Power 100KW max torque 11,000 Nm (up to 85 rpm) max. speed 2500 rpm Rapid traverses: X; Y axis: 15 m/min W; Z - axis: 10 m/min Attachment ...

Guelleveredler Hamo Built in approximately 1981 Length approx. v. 4 m to 6 m Condition as new stock items without operational use: Hamo Guelleveredler for it serves to prepare the manure so that these valuable natural fertilizer specifically can be to the vegetation. Improve d. Duengewertes d. Guelleals Can be used also if necessary for better preparation for BIO-gas plants. Equipment Guellerohr with air inlet valve, agitator, 3 KW drive motor,. Time switch control-various fasteners, small parts. By mixing through (homogenisation) of manure evenly density and quality. Per minute 3 cubic metres of liquid manure We have about 15 PCs various sizes in stock, sale as long as d. stock enough without warranty of any tour at any time by appointment possible in the camp PROVIDER Machinery die GmbH 94094 Rotthalmünster, Germany registered since 2010 151 listings o ...

Precision Die Sinking Machine Fabr. MD PRONTO Dieburg Type 50.35Fabr. -No: 0-1.9.7, built in 12/1990Work table length x width: 650 x 350 mmMax. Workpiece dimensions Length x width x height: 900 x 550 x 400 mmTravel across X: 350 mmTravel length Y: 300 mmVertical travel Z: 180 + 200 mmMax. Travels of work table and machining head: 450 mmMachine weight approx. 1300 kgrequired footprint: 2700 x 1550 x 2450 mmExternal dimensions of the machine: 1280 x 1300 x 2100 mmTank size: 1100 x 550 x 400 mmTank volume: 240 l:With- Digital display- Depth shutdown- CO2 fire extinguishing system Gloria- Clamping system Hirschmann- separate power supplyas new, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available ...

Forklift attachment crane booms with hacking little used Producer: Seith conveying new village Type: 60.30/578 Load capacity: 5to LSP: 500 mm fixed boom and column Hacking adjustment by hand with adjust positions Weight: 240 kg ESP: 400 mm Gr. projection: approx. 1.6 m Overall length: 1.8 m, height: 1.4 m Clip on version on the stacker plate and clamp-on PROVIDER Machinery die GmbH 94094 Rotthalmünster, Germany registered since 2010 151 listings online & #57620;. REQUEST SEND Ladies and gentlemen, Please send us a quote for forklift attachment crane booms Salim conveyor Neuendorf crane boom 5 to type: to 60.30/578. Thank you very much and greetings I'm dealer quotes for similar machines interested in financing through leasing or hire-purchase

PARKETT - HIRNHOLZ - PRODUCTION - SYSTEM up to 34 mm thickness Manufacturer: KEUSCH / KALFASS Plant consisting of: - Ablängsägealage with material supply table - Material allocation - device - Material conveyor belt - Brush unit for material cleaning - Glue station - Stacking device automated -KALLFASS- - Packaging station -KALFASS- - Foil welding station NEW PRICE from the plant 248,000,-- €

CNC spark erosion machine make AGIE type AGIETRON 100Device list 357914.1, series 015, device 005Technical specifications:Table size: 580 x 450 mmwith 3 T-slots 10 mmX axis: 350 mmY axis: 250 mmWeight of the erosion machine: 2275 kgWith- Agiematic T control, device list 813834.9, series 008, device 008, 290 kg 1.25 kVA- FSK, device list 813864.6, series 008, device 009, 65 kg- ATK 35, device list 144170.8, series 016, device 009, 220 kg- Generator Agiepuls 60M, device list 814104.6, series 008, device 008, 305 kg 3.4 kVA- Dielectric unit DA 100, device list 369964.2, series 020, device 009, 460 kg, 4.2 kVA + PD + GEN- tool changer- Cooling unit make HIROSS ICE 005, 230/1/50 serial no. 3293540001, 110 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We  ...

Zubehoer: filter system with pump control cabinet The machine is equipped with a Hirschmann deflection head, H 1.2 system, Orbi-Cut System 3 R

Travel X / Y / Z 350/250/300 mm Table size 560 x380 mm C-axis 6-fold tool changer Hirschmann clamping system extinguisher

Hello, I have a chipper for sale with a 6-cylinder John Deere engine, about 250 HP The chipper, despite its age and appearance, is fully operational. Its strong advantage is its very simple structure. It does not require a complicated service for simple repairs. The same applies to the operation, which is very intuitive. A chipper for a wide variety of needs: - Various types of wood waste - The cuts - Pallets - The bark - blocks, waste - and many others Capacity about 80 m3 / h depending on the material, operator efficiency, type of material and sieves It is possible to install different sizes of screens depending on the needs The wide charging with dimensions of 4.10m x 1.90m allows you to backfill even with very large loaders The working width of the roller is 1.45 m and the sieves have a mesh size of 8 cm x 8 cm. Chippers of this type and power, regardless of age, kee ...

Weber, Masch. No. 1109226, orbital riveting machine with RT-stand Motor M 631 / 4 0.18 kW 1360 RPM KMT - APK T-3-S-60-Z SN 307 89 01 Riveting time - adjustable 0.15-3 s Control - Siemens Simatic S 7-200 External dimensions 30 x 20 x 86 cm - riveting machine Panel 50 x 40 x 30 cm More info and details. Photos upon request I am retailer offers to similar machines interested in financing through leasing or hire-purchase request send data protection