Single Stand - Eccentric Press PELS - RICHTER Type PEKR 125 Masch. No. 20684 Year of construction 1967 Compressive force 125 ton. Projection 430 mm Table size 1100 x 750 mm Ram surface 890 x 650 mm Table opening 400 mm Stroke adjustment 6 to 115 mm Ram adjustment 100 mm Installation height largest stroke above max. 450 mm Clamping pin bore 50 mm Stroke rate 60 strokes/min. Table height above corridor 900 mm Motor power 7.5 kW Mains connection 380 volts, 50 Hz - Overload protection by crushing plate in the plunger - Compressed air Clutch-brake combination DESCH- Plunge weight compensation cylinder - Manual ram position - Two-hand operation - Cam switchgear - Grease central lubrication Vög ...

4-column hydraulic press, laboratory press used; Manufacturer: Henry Berry Co. LTD. England; Pressing force: 200 tons; -Table size approx. 1520 x 1680 mm with additional T-slot clamping plate approx. 1200 x 1200 mm; -Punching plate with additional T-slot clamping plate approx. 1200 x 1200 mm -Max. piston stroke approx. 1400 mm; -width between columns approx. 1500 mm; -Hydraulic tank approx. 1000 x 1000 x 1000 mm / approx. 400 litres with power box, filters, hydraulic manifolds and other small parts; -Hydraulic pump with electric motor; -Universal motors 380 V, 50 Hz, 18.5 kW; -(power unit and engine were renewed in 2012); -Size of the press approx. 1700 x 2050 H 5700 mm (+ accesso ...

HENRY SØBY CR200 Brand:HENRY SØBY Type:CR200 Stock number:M21-1276 Cooling capacity:390 kW Application:Freezing Displacement:1,997 m³/h Refrigerant:R717 (NH3/Ammonia) Voltage:400 Volts Motor power:132 kW Weight:2,500 kg Year:1984 Number in stock:1 piece(s) Price:Quotation Request Description: An ammonia Henry Søby booster screw compressor unit with Unisab 3 controller and an oil separator (1082 liters). Mentioned capacity at an evaporating temperature of -40°C and a condensing temperature of -10°C. Visit also our website: used-refrigeration

Ram stroke: 80mm, ram adjustment: 100mm, max. working width: 4750mm, machine needs overhauling. ...

• more information

Hydraulic safety lock from an overload: 125-250 tons Number of idle slide strokes per minute: -For the head press: 20 -For the subsequent press: 25 Number of microdrive strokes per minute: 0,45 Electric motor for the press table: 45 kW Electric motor for the microdrive: 17 kW Max. balancing weight of the upper part of die on the slide: 3,5 tons Distance between columns: 2550 mm Slide stroke: 400 mm Max. extract depth: 160 mm Slide adjustment: 250 mm Adjustment range of the extract depth: 0-160 mm Max. closed height: 800 mm Height of the pull-out table: 500 mm Table dimensions: 2500x1250 mm Table bore dimensions: 2100x850 mm Slide dimensions: 2500x250 mm Weight: 74500 kg

Manufacturer: ERFURT - Niemcy 2 PIECES AVAILABLE Model: PKZV I 1250 Condition: Very good, complete, under power Technical details Table: 4000 x 1800mm Press weight: 230T Force: 1250T Slide stroke: 630mm Centres of pressure: 2 Adjustability of slide: 630mm Max delight between bolster and slide: 1165mm Width beteen columns: 4000mm Slide area: 3950 x 1800mm Bed area: 4000 x 1800mm Opening in bed: 3750 x 1300mm Main motor power: 132kW Idle stroke rate: 11 per minute Counter pressure of cushion in bed: 250T Stroke of cushion plate: 250mm

Effort 500t Slide stroke 500mm Number of strokes per minute 20 Slider dimensions 3840 x 2290 x 2360mm Slider weight 17 300kg Adjustment of the distance between the slider and the table 500mm Max. open press height 1300mm Max. open die height 1280mm Min. Closed height of press 800mm Min. closed die height 820mm Height of sliding table 500mm The maximum force of 3 pillows of pressing 100t Cushion plate stroke 200mm Main motor power 75 kW Number of sliding tables (sideways movement) 1 Number of additional drawers 1 Press weight 136,700kg

moving bolster Capacity, ton 500 Centers of pressure 2 Idle stroke rate 20 Distance between the uprights, mm 2800 Shut height, mm 1100 Table dimensions, mm 2800 x 1800 Table gap, mm 2400 x 1250 Ram dimensions, mm 2800 x 1700 Ram stroke, mm 500 Ram adjustment, mm 500 Die cushion adjustment, mm 200 Die cushion stroke, mm 200 Die cushion capacity, ton 100 Main motor power, kW 75 Press weight, kg 120000

effort 250 ton stroke 315 mm slide adjustment 160 mm distance slide- table 800 mm die height 555 slide 620x950 mm table 800x1180 mm 28 kW Total weight 25t  ...

• more information

Capacity: 800 tons Stroke of slider: 500 mm Number of strokes per minute 12 Adjustment of slider: 185 mm Table area: 1250 x 1650 mm Slider dimensions 1000 x 1250 mm Main motor power: 55 kW Distance between columns 1250 mm Press dimensions, mm 3800 x 2800 x 6900 Weight: 57 tons