heidelberg 52 4 used for sale

Battery from former Linde Service 830x630x630mm Voltage in idle mode uncharged 51.76 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45453-1160

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/TQ7VlMUlZI0 - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery:02/2018 48V 4PzS 560Ah, very good performance measured with 49.9V - Triplex mast with full free lift - Safety light at the rear - Comfort seat Auction-ID: A1-45453-287

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45453-3701

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3598

The ride-on mower is in good condition. 746 working hours. Auction-ID: A3-43534-34029

Battery set complete with interchangeable frame from former Still Service Battery fits many Still FM-X and Linde R reach trucks (simply compare dimensions LxWxH). Very good performance measured at 50.99 V. Loading onto trucks with forklift trucks. Auction-ID: A1-45453-1080

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/Tjd0oqbzxks - Former Linde full-service device - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Comfort seat - Attention: drives slowly, error in the display Auction-ID: A1-45453-73

Battery from former Linde Service Good performance measured at 48.3 V. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45453-1038

With disaster provision. Dimensions 401x185 in 2700kg. Lowered version. Trailer is still stitched, needs to be removed by the new buyer. Drawbar repair is required! ( improperly repaired )! New repair required, fixer-upper! Last inspection valid until 01/03/2027. Auction-ID: A3-44485-17002

For lithium batteries from 82-410Ah REMA Battery Connector 220V plug Auction-ID: A1-45453-3589

Loading onto trucks no problem Auction-ID: A1-45453-3637

Kubota compact diesel tractor equipped with KATANA B-40 hydraulic front loader and body. Tractor has 3-point linkage and presumably PTO. Reading hours is 7228 hours. Compact and manoeuvrable machine suitable for agriculture, horticulture, stable work and site maintenance. Front loader with maximum lifting capacity of 180 kg included. Auction-ID: A3-43534-11963

A spirit level is without a doubt one of the most valuable tools in your workshop and should therefore not be missing in the toolbox. This design combines a corner level with a snap hook and can therefore be used for a very wide range of projects. The model is equipped with a horizontal vial and equipped with a vertical vial and the degrees are clearly read thanks to the digital protractor. The graduation is analog and is represented as millimeters and as inches. After use, you fold the model together and you are left with a very compact design. This digital angle level and mop hook is the ultimate dream of every professional and hobbyist. The model has a backlit display that you can easily turn on or off and the model is equipped with a hold function. In addition, the digital angle level and mop hook comes with a 9 Volt battery, so you can get started right away with this very versatile ...

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3468

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/QwXskYG7SDo - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 26/03/2023, 23.1V 205Ah, good performance measured at 23.09V - Integrated scale Auction-ID: A1-45453-329

Foreign buyers get the 19% VAT back from the auction house immediately after the machine is exported Youtube function and status video: https://youtu.be/fhHgzyb32fo Former Linde full-service machine valid service until 12/2026 UVV valid until 12/2026 Battery: 206/11/2019 24V 3PzS 345Ah , with very good performance, measured at 25.0 volts - Triplex mast with full free lift Auction-ID: A1-45453-354

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3578

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3451

table Ø 550 mm; Equipped with roller conveyor Auction-ID: A1-46386-36

Youtube function and status video: https://youtu.be/q0PF2kLWjA4 - Former Linde full-service device - current service valid until 01/2027 - Current UVV valid until 01/2027 - Triplex mast with full free lift - Foldable platform - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - Battery: 05/2019 24V 375Ah, with weak power, measured at 25.4 volts Auction-ID: A1-45453-394

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/_JKycaXsgcw - Former Linde full-service device - Triplex mast with full free lift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - StVZO lighting with turn signals for road approval - Comfort seat Auction-ID: A1-45453-134

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45453-3702

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45453-3652

REMA Battery Connector 220V Wall Plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3623

Roof slope 20 degrees Construction consists of: 5 Intermediate trusses: 2 x column I270 and the first 1.70 mtr. v.d. roof beam I270, the rest of the roof beam I240 1 End truss: 2 x corner column I180, 2 x roof beam I180 and 2 x intermediate column I200 1 End truss: 2 x corner column I180, 2 x roof beam I180, 2 x intermediate column U200 and 1x door beam U200 a 5.00 mtr. 10 Coupling tubes 70 x 70 x 3 24 Wind bracing strips flat 5O x 6 with tensioner M16 Galvanized Screws 8.8 With NEN 1090 CE marking certificate Lot is loaded with a forklift for free Auction-ID: A1-46841-6

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/whgXFw6Jh_Q - Former Linde full-service device - Service valid until 05/2027 - UVV valid until 05/2027 - Battery: 36/2019 80V 5PzS 775Ah, very good performance measured with 83.6V - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Warning light orange - Safety light at the rear - StVZO lighting with turn signals for road approval - Comfort seat with lumbar support and seat heating Auction-ID: A1-45453-59

Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325 x 175 x 125 mm, Øext.min. working wheel: 220 mm, Max. profile depth of the working wheel: 8 mm, Lubrication (auto / manual): Manual, Control type ((cnc / manual): Manual, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Long: 1520 mm, Width: 1020 mm, High: 1260 mm, Weight: 1550 Kg, Driving wheel motor power: 0.75 Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Longitudinal auto, manual penetration of both grinding wheels, Cnc axes nº: 1, Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, Accessories included: Grinding wheel balancer, plongeé rule holders / Grinding wheel balancer, plongeé rule holders., High: 2.100 mm, Weight: 15.000 Kg

Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Peripheral grinding wheel speed (m / s): Variable with regulator, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Dressing (auto / manual): Automatic CNC the 2 grinding wheels, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Lubrication (auto / manual): Automatic, Control type ((cnc / manual): CNC, Cnc axes nº: 8, Infeed (auto / manual): Automatic, Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 75 Kw, Power hydraulic motor: 3 Kw, Accessories included: Fairing, rule holder and plongeé, MARPOSS E50 meter, speed regulator. grinding wheel work, Total power: 90 Kw, Voltage: 220 / 380V, Lo ...

Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325 x 175 x 125 mm, Øext.min. working wheel: 220 mm, Max. profile depth of the working wheel: 8 mm, Regulating wheel speed nº: infinite, Infeed (auto / manual): Automatic / Automatic, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0.75 Kw, Long: 1520 mm, Width: 1020 mm, High: 1260 mm, Weight: 1550 kg, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

Ø grinding wheel dimensions (od x id x width): Ø650xØ304.8x500 mm, Ø min / max to grinding: 3/200 mm, Peripheral grinding wheel speed (m / s): 35 m / s, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/225 rpm, Dressing (auto / manual): Automatic CNC the two wheels, Diamond dressing speed: infinite 10/225 rpm, Lubrication (auto / manual): automatic, Control type ((cnc / manual): CNC, Cnc axes nº: 6, Infeed (auto / manual): Automatic CNC, Regulating wheel dimensions (od x id x width): Ø355xØ203,2x500 mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Weight: 14,000 Kg machine + peripherals, Accessories included: Fairing, hydraulic work cap, hydraulic ruler / Machine casing, hydraulic cover of the grinding wheel, hydraulic workrest

Automatic wheel balancer, CNC gantry loader, electric hoist, cutting speed regulator, hydraulic lifting wheel grinder, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Speed ​​255 r.p.m., Diamond dressing speed: 255 r.p.m., Control type ((cnc / manual): CNC, Cnc brand: SIEMENS, Cnc model: 840D, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300mm, Width: 2.800mm, High: 2.100mm, Weight: 14.000 kg, Accessories included: Automatic wheel balancer, CNC gantry loader, ...

Without content; Per shelf 200 Kg max load Auction-ID: A1-46981-192

Measuring device for the determination of inductances, capacitances and impedances Auction-ID: A1-46981-222

Equipped with: A1300, Snorkel front, 8 speeds, OM352 6-cylinder diesel engine, skylight, permanent 4x4 with portal axles, manual gearbox with terrain/crawler gears, maximum total weight 7,500 kg, axle loads front/rear 4,000 kg, and a body/body number 425 820-10-16048, tow bar with pin, ball tow bar 50mm, adjustable tow bar / multi-clutch, 2 air coupling for brakes, 7 and 13 pin connection, all maintenance is completely documented, Auction-ID: A1-40139-11

Equipped with: Hook lift system, 6x4 double air, climate control, cruise control, navi/cd/cd. Electric driver's seat; air suspension and heated, electrically operated steering wheel, 2 axles rear air suspension, rear axle steering, Auction-ID: A1-42018-11

Cushion dimensions: 56 x 36 x 10 cm Approximately 450 cushions 90 pieces per pallet Block pallets size 120 x 100 cm included Auction-ID: A1-40139-296

Zoller Tool Presettler Smile 400 A Zoller tool presetter is an external measuring machine that allows you to capture the geometry data of your CNC tools (such as length, diameter and radius) outside the machine tool. This saves set-up time, increases precision and extends tool life. Zoller »smile« / »smileCompact«: The ideal standard device for the workshop. It is compact, easy to use. For sale is a fully functional Zoller tool presetter of type [model, e.g. Smile 400]. The device is characterized by the highest precision and intuitive operation. Ideal for CNC milling and turning operations to reduce set-up times. [1]oh and provides basic measurement functions for length and diameter SK 50 mounting, Auction-ID: A7-46993-1

Equipped with: Steel staircase with grid steps, system profiles perforated, original calculations available, 36 meters of handrail (steel) present, column pressure on concrete floor max 11180 kg! Complete with mounting material! Auction-ID: A1-41997-9

Starts and drives properly maintenance booklet available signs of wear by age and mileage Auction-ID: A1-42018-6

Equipped with: lighting, electric windows, windshield wipers, hydraulic tailgate, power does not start Auction-ID: A1-42018-14

Equipped with: wooden floor, clean, dry and smellless Auction-ID: A1-42018-250

Equipped with: 2 floors each 3400mm high above each other. 2 Stairs of steel with grid steps, system profiles perforated, original calculations available, 72 meters of handrail (steel) present, column pressure on concrete floor max 23000 kg! Complete with mounting material! Auction-ID: A1-41997-8

54 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 39.9 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40113-152

Suitable for printing and applying labels Equipped with integrated printer module Equipped with label roll holder Version with conveyor belt Equipped with emergency stop Year of construction: 2012 Supply voltage: 200–240 V Frequency: 50/60 Hz Maximum weighing capacity: 6 kg Minimum weighing capacity: 20 g Graduation: e = 1/2 g Made of stainless steel and plastic housing Made in Japan Auction-ID: A1-40113-165

Equipped with: Steel staircase with grid steps, system profiles perforated, original calculations available, 36 meters of handrail (steel) present, column pressure on concrete floor max 11180 kg! Complete with mounting material! Auction-ID: A1-41997-10

Type: Diesel scissor lift Make: Airo Model: SF1000D 4WD Year: 2007 Drive: 4x4 diesel Working height: approx. 10.2 m Platform capacity: 450 kg Platform size: approx. 3,200 x 1,400 mm Climbing ability: approx. 30% Configuration: Self-propelled scissor lift for rough terrain Stabilization: Hydraulic outriggers Control: Platform control panel + ground control Color: Yellow / black Remarks: Complete machine, currently NON-functional; visible wear, corrosion and usage marks; suitable for repair or spare parts. Own mass: approx. 3,200 kg Auction-ID: A7-46982-3

equipped with 2 infrared lamps; digital control panel; Height adjustable and rotatable; 400 V. / 12 kW; (for the purpose of curing spraying) Auction-ID: A1-41997-59

102 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 75.5 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40113-155

Without content; Per shelf 200 Kg max load Auction-ID: A1-46981-189