130,788 used machines on RESALE, but how to find them? Machine Search
Dimensions (L/W/H): 1300x2070x1135 mm Weight: 320 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 6 mm pressure: 18 t blade length: 220 mm angle adjustable from - to: 90 Grad table surface area: 1100 x 950 mm chamfer lenght: 835 mm total power requirement: kW weight of the machine ca.: 1,1 t dimensions: 1,2 x 0,8 x 1,4 m Combination machine: edging and notching - foot switch - Emergency stop switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Container roller set, container rollers for moving standard containers, Haacon, 16 to load capacity – used -: Price from location: 7.500.-€ (net) Manufacturer: Haacon Type: 4336.16-231720 Year of Make: 2022 Factory number: 1074982-01-00-001-51 Component Number: 215993 Load/set: (4 units): 160kN Load/Unit: 60kN Rolling speed: max. 6km/h Container castors for moving standard containers Handlebar for handling the roller when dismantled and for resteering with parking brake Castor set consisting of pull linkage, four swivel castors, lockable in the direction of travel Taxiing up to 6 km/h Former new price: 9.907.-€ Available: immediately Condition: like new – only used about 3 times Location: 79183 Waldkirch
x-travel: 11500 mm y-travel: 4500 mm w-axis: 1600 mm z-axis: 2000 mm spindle diameter: 200 mm Rotary table: E25OB23941 2.000x 2.000 mm bed length turntable: 4600 mm tool taper: SK50 : 80 t Plate field size: 10.000 x 15.000 mm tool taper: SK 50 total power requirement: 83 kW weight of the machine ca.: t incl. 15 plates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting length: 2000 mm sheet thickness - max.: 6 mm operating pressure: 250 bar fabric-no.: S2669 weight of the machine ca.: 4,7 t working width: 2059 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Condition: in working order Availability: immediately Location: Thuringia / Arnstadt approx. table 600 x 400 mm approx. travel distances X / Y / Z: approx. 400 / 320 / 410 mm approx. spindle holder SK 40 Approx. spindle speeds 45 - 2240 rpm approx. drive power 4.9,kw approx. weight 2000 kg
turning diameter: 380 mm turning length: 580 mm swing dia.: 695 mm X-Axis movement: 234 mm Y-Axis movement: 100 mm Z-Axis movement: 575 mm Minimum indexing C-Axis main Spindle: 0,0001 ° Number of tools on turret: 12 Number of driven tools: 12 x Spindle speed driven tools: 4500 1/min Spindle motor driven tools: 5,5 / 3,7 kW Tool type: Mazak VDI control: MATRIX NEXUS II Main Spindle:: Spindle Speed: 5000 1/min spindle motor: 26 / 22 kW spindle bore diameter: 76 mm 2nd Spindle:: spindle turning speed range: 6000 U/min spindle motor: 11 / 7,5 kW spindle bore: 80 mm total power requirement: 43 kVA Weight: 5,5 t dimensions of the machine ca.: 2,8 x 2,1 x 1,9 m - Mazatrol Nexus II CNC control - Main and counter spindle - 12-station tool turret with driven tools and Y-axis - 3-jaw chuck -- Main: 8 -- Counter: 6 - Automatic presetting (Tool Eye). - Automatic workpiece catcher. - Side belt chip ...
Fully functional CNC turning and milling center CNC Lathe Manufacturer: Index Type: G250 G 250 Year of Make: 2004 Location of the machine: 76661 Philippsburg The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.
Brembana Helixchanger Heat Exchanger Notified body AIB VINCOTTE Pressure 4/10 bar Capacity 6600/3800L Hydr.press 7,5/14,3 bar
VALOREL Stainless Steel Vessel 620 Ltr. with propeller stirrer, allowed pressure 2,5/-1bar, max. temp 150C , on top there is a inlet 50mm for clamp connection, down outlet valve diameter 2"
This 5-axis DMG MORI DMF 260-11 Linear was manufactured in 2017. It features a large table (3200 mm x 1100 mm), high load capacity (4000 kg), and extensive axis travel (X: 2600 mm, Y: 1100 mm, Z: 900 mm). With a spindle speed up to 10,000 rpm and a 60-pocket tool magazine, its ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the DMG MORI DMF 260-11 Linear machine we have for sale. Contact us for more information.
Roll bending machine manufactured in 2020. This Metallkraft GBP BASIC 26100 features a pressing force of 100 tons and a maximum bending length of 2600 mm. It is equipped with an 11 kW engine and has an oil tank capacity of 150 liters. If you are looking to get high-quality bending capabilities, consider the Metallkraft GBP BASIC 26100 machine we have for sale. Contact us for further details.
Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm feed: 5-25 m/min Dimensions (L/W/H): 4700/1800/1100 mm weight: ca. 4.000 kg CASOLIN MEGA 230/6 four-side planer ------------------------------------------ 6 spindles, with touchscreen control. Width and height controlled. Spindle arrangement: 1st spindle: bottom, 40 mm diameter, 6,000 rpm, 5.5 kW 2nd spindle: right, 40 mm diameter, 6,000 rpm, 11 kW together with 3rd spindle: left, 40 mm diameter, 6,000 rpm 4th spindle: top, 40 mm diameter, 6,000 rpm, 7.5 kW 5th spindle: bottom, 40 mm diameter, 8,000 rpm, 5.5 kW 6th spindle: top, 40 mm diameter, 8,000 rpm, 5.5 kW Machine without machining tools. The additional screen on the front of the machine is not included in the scope of delivery (is part of the window system). Machine already dismantled and stored. (technical information accor ...
cutting diameter: 220 mm capacity 90 degrees: square: 220 x 220 mm turning speed range:: 20 - 140 m/min saw band length: 3720 x 34 x 1.1 mm height of material-table: 825 mm coolant capacity: 80.0 l total power requirement: 2.5 / 3.5 kW weight of the machine ca.: 1500 kg range L-W-H: 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - https://www.youtube.com/watch?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range via handwheel including analogue value display - automatic height adju ...
power capacity: 1,5 kW volt: 380 V ampere: 5,75 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 1,1 kW volt: 380 V ampere: 2,8 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 2,2 kW volt: 380 V ampere: 5,3 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Máquina para encolado de dos piezas de cartón. Formato mínimo de 1 sola pieza: 450 x 200 mm Formato máximo de 1 sola pieza: 1150 x 1400 mm Velocidad máxima: (2) Hasta 4.000 hojas/hora Espesor de pliego: Cartón corrugado A E / 3-5 capas Potencia instalada: 16 kW Dimensiones unidad principal: 3000 x 3000 x 1300 mm Dimensión manta salida: 5000 x 1400 x 800 mm (1) Los datos técnicos pueden ser modificados por el fabricante sin previo aviso. (2) La velocidad puede variar en función del material y su calidad, formatos y otros requisitos de producción.
B&A REF: 9223 TON: 70 SCREW DIAMETER: 32MM SHOT WEIGHT: 109 STROKE VOLUME: 120CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 530 X 495MM DBTB: 360 X 315MM MIN MOULD HEIGHT: 120MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 310MM MAX DAYLIGHT: 120MM EJECTOR STROKE: 100MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 6KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE: HYDRAULIC
used
B&A REF: 9254 TON: 60 SHOT WEIGHT: 151 STROKE VOLUME: 166CM3 INJECTION PRESSURE: 1235AR PLATEN SIZES: 650 X 650MM DBTB: 360 X 335MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 650MM EJECTOR STROKE: 80MM CONTROLS: ALPHA 2 MOTOR: 11 SERVO HEATING CAPACITY: 7.7KW SCREW DRIVE: HYDRAULIC
6-axis industrial robot for handling components with a payload capacity of up to 25 kg. Designed in IP67 protection class, suitable for demanding environmental conditions and compliant with ISO Class 5 cleanroom requirements. Incl. separate control cabinet for each robot. 2 identical robots available.
Miter range: 90°/30°, saw band inclination: 2°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: 3350mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 2000mm/1650mm/1850mm, weight: approx. 650kg. An on-site inspection is possible.
This 4-axis DN SOLUTIONS LYNX 2100GA was manufactured in 2021. As new, showroom model. It features a maximum spindle speed of 6,000 RPM and a bar capacity of 45 mm. The machine is designed for high-performance compact turning, optimized for small precision parts. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS LYNX 2100GA horizontal turning machine we have for sale. Contact us for further details.
A two stage tea and spice mixer Gebrüder Kerner with renewed control circuitry and wiring is available. Volume: 2000l, Material: steel, Drive power: 3.1kW, Control: Siemens. Without stand and feet. An on site inspection is possible.
Cutting dimensions X/Y: 2000mm/3000mm, Z-axis stroke: 230mm, machine tolerance: +/-0.05mm/m, repeatability: +/-0.025mm/m, simultaneous movement: 56m/min, max. cutting speed: 30m/min, max. material thickness: 200mm, max. load capacity: 790kg/m², max. workpiece weight: 4740mm, max. clamping material thickness: 50mm, max. pump pressure: 3800bar, max. working pressure: 3600bar, machine weight: approx. 11300kg, working hours: 18111h. Documentation available. An on-site inspection is possible.
9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunen Capacity: 2000 ton x 14 meter Backgauge: CNC Control: 2D Touch Passage between uprights: 12470 mm Max stroke: 900 mm Max distance between table -- ram: 1600 mm Depth of throat: 1255 mm Table width: 800 mm Locking speed: 77 mm/sec Working speed: 9 mm/sec Returning speed: 85 mm/sec Electric motor (power): 2x 90 kW Length: 16835 mm Depth: 5695 mm Height: 6750 mm (above floorlevel) Weight: 370 ton Capacity: 2000 ton Bending length: 14 000 mm
Conrad Boxer 200 drilling rig , Pull-up 4000 daN / kg, Pull-down 2000 daN / kg, Winch//Witch 1450 daN / kg, Year of manufacture 2007, Weight 12,500 kg, Stroke 430 cm, This Conrad Boxer is equipped with:, Caterpillar track , - Caterpillar length center to center : 2600 mm., - Caterpillar width : 400 mm., Brevini EGO200LS winch with 50 meters / Ø10 mm., Soundings winch 200 meters stainless steel wire, Ø 2mm., , Hydraulically driven 4 drill head , , - Max. Drive torque 380 - 400 daNm, - Breakaway torque 475 - 500 daNm, - Max. Speed 80 rpm, , Hydraulically operated changeover clock, suitable for 3 1/2 drill pipes., Spool head suspension with weight compensation, Hydraulically operated catch clamp, Hydraulic tank 480 liters, Hydraulically driven spray pump, Drill pipe manipulator, Drill pipe storage rack incl. 74 pcs. 3-meter 3-1/2-inch drill pipes (222 mete ...
surface area: 420 800 mm no. of flutes: 9 groove width: 12 / Abstand 45 mm weight of the machine ca.: 110 kg dimensions of the machine ca.: 10,50,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We are selling here a vacuum tumbler from the manufacturer Günther, type GPA 200K in a good used and functional condition. The machine was built in 2009, runs on 400 volts, 1.5 kW, completely stainless steel, rollable, container tiltable, volume 200 liters, capacity 140 kg, programmable control, without cooling, workshop tested, immediately ready for use, dimensions W/D/H 175/82/160 cm, others on request.
We sell a high performance doming machine Machine for the production of LED and electronic encapsulation, 3D stickers and much more. The doming machine is designed for production with 2K polyurethane or UV doming resin and offers flexible applications, e.g. for the casting of LED light strips, for electronics sealing or doming stickers Condition: very good Our doming system is designed for industrial continuous load: precise axes, volumetric gear metering, and user-friendly software. Whether it's LED potting, electronic coating or 3D stickers, you get a machine that reduces your unit costs while keeping quality consistent. An all-rounder for series production for maximum cycle time and large components. With a height-adjustable, mobile work table, for a flying change in continuous operation without downtime, ideal for wide range of applications. IN A NUTSHELL • Hig ...
Vertical lathe Hessapp DVH 250 BJ 2004 (already dismantled)
Fiber laser cutting machine for profiles and pipes 3kW 230x6000 mm
Inv. Num. : 8986 Type: DH-250/4 Producer: WMW Created: 1983 Parameters: Length: 3400 mm Width: 2100 mm Height: 1600 mm Weight: 4800 kg
(1970) 200t Müller-Weingarten Eccentric Press Heavy-Duty Eccentric Press for High-Capacity Industrial Forming This powerful 1970 mechanical press is engineered for heavy-gauge metalworking, offering a significant 200-ton pressing capacity and a maximum sheet thickness of 28 mm. Technical Details Machine Type: Eccentric Press Manufacturer: Müller-Weingarten Model: AR 200 Year of Manufacture: 1970 Nominal Force: 200t Max. Thickness: 28 mm Stroke Rate: 32 strokes/min Ram Stroke: 40 – 180 mm Ram Adjustment: 110 mm
(1980) 200t Paul Müller Eccentric Press Heavy-Duty Eccentric Press for Cold Forming This Paul Müller press delivers a robust 2,000 kN pressing force and features a versatile adjustable stroke range of 20 to 140 mm. Technical Details Machine Type: Eccentric Press Manufacturer: Paul Müller Model: EXP 200 R Machine Number: 11380 Year of Manufacture: 1980 Nominal Force: 200t Throat Depth: 400 mm Stroke Rate: 40 strokes/min Adjustable Stroke Range: 20 – 140 mm Ram Adjustment: 80 mm Max. Distance (Table to Ram): 530 mm Table Dimensions (W x D): 1,120 x 780 mm Ram Surface Area (W x D): 700 x 400 mm Bed Hole (Bolster Opening): 360 x 230 mm Motor Output: 18.5 kW Operating Voltage: 380 V Total Weight: 12,500 kg
CS 2500-KF PLUS – Industrial Roasters for Nuts, Seeds & Snacks, The robust Ceselsan CS 2500-KF PLUS is a versatile continuous rojust furnace for the industrial processing of nuts, kernels, seeds, dried fruits and snack products. The system offers uniform heat distribution over multiple zones and enables precise control of temperature, product thickness and belt speed – ideal for reproducible product quality., Bandwidth: approx. 860mm, Insertion funnel width: approx.: 860x600 mm, With dragger kettle for salting or seasoning the products to be roasted Type TZM 150 (150 liters). This doses the products in the roaster after mixing., Diameter of the filling opening: about 600 mm,, Only about 30 operating hours., Information from the operating manual of the machine:, Technical specifications, - Dimensions: 3.636 × 1.946 × 2.000 mm, - gas heated, - Electrical consumption:, - Installed pow ...
The Velati M 2000 twin shaft paddle mixer is a robust and reliable industrial device, specially designed for food processing in commercial kitchens or production facilities. This type of used mixer is characterized by its high capacity and efficiency in mixing a wide variety of ingredients. Thanks to the twin shaft technology, the M 2000 ensures even mixing of the materials while minimizing mixing time. The paddles are designed to ensure optimal mixing without excessive friction, which maintains product quality. The stable construction of the device offers long-lasting performance and lower maintenance requirements. Ideal for use in food processing, this mixer is a valuable addition to any company that requires high-quality and consistent mixes., power: approx.: 1,600 kg mixing volume, Dimensions / weight: Mixer: L x W x H: 4,650 x 1,500 x 1,950 mm, auger: L x W: approx. 5,100 x 2,000 mm ...
High-performance, completely stainless steel automatic grinder for industrial applications., Ideal for meat processing, pet food, and other protein-based products. Available immediately., Used machine from Seydelmann, overhauled in 2025 and not in use since., Largely rust-free, 2-turn working auger, 3-turn feed screw, - With 200 mm diameter perforated discs, - Control cabinet installed, - Dual-stage thermal overload control, 1. Impulse reduces feeder speed, 2. Pulse switches off main motor, - Approx. 400 liter funnel, - Conical feed screw made of stainless steel, Special casting, perpendicular to the working screw, - Solid stainless steel worm housing with hardened running surfaces, - Stainless steel bayonet fitting, - Electrically locked spillage hand guard, - Rocker switch on the top edge of the funnel, - Machine stand closed at the bottom with ventilation system, Three-phase motor IP ...
Single beam X-ray inspection device,, was used for cylindrical jars and cans,, Capacity: approx. 150 glasses / min,, with ejection of contaminated containers,, with conveyor belt,, in use until 04/2024.
In this case, the containers to be labelled are fed in by hand. The system was used for cylindrical jars with a low height. They are first given a base label from below, turned by 180° using a turning basket, and then given a security seal label from above. The labelled jars then run onto a storage table, offset by 90°.
8-digit rotary machine, make Breitner, type IDR 2885, year of manufacture 1985, With template – pressure vessel,, Filling range: 10 - 10,000 ml,, Connected load: 4 kW, Used for delicatessen + mustard (200 + 250 ml - jars)
automatic rotary machine,, in use for mustard,, set up on round plastic cups with a diameter of 70 mm and a height of 80 mm,, additional format for rectangular cups: 55 x 43 x 17.7 mm, Filling volume: 5 - 200 ml, Output: up to 1,500 cups per hour,, Rotary consisting of:, Cup magazine, automatic unstacking of the cups,, filling station,, Lid station with corresponding lid magazine and automatic unstacking of the lids,, Output of the filled and sealed containers to an integrated collection table
This 4-axis DOOSAN Puma 2600 LYB II was manufactured in 2021. It features a maximum turning diameter of 376 mm and a turning length of 1,350 mm. The machine includes a 12-station turret, a live tailstock, and a steady rest with a diameter range from 40 mm to 200 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600 LYB II horizontal turning machine we have for sale. Contact us for further details.
This 3-axis Mazak VCS 530C vertical machining center was manufactured in 2015. It features a robust Mazatrol MATRIX 2 control system, a table size of 1300x550 mm, and a maximum table load of 1200 kg. The spindle operates at speeds up to 12000 rpm with ISO 40 taper, and the machine includes a 30-position tool magazine and dual pallets. Consider the opportunity to buy this Mazak VCS 530C vertical machining center. Contact us for more information.
table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2520 mm plate thickness: 2.50 mm ST thickness at Niro-steel: 1.50 mm upper clamping bar adjustment: 160 mm adjustment speed: 100 mm/sec Adjustment folding beam: 80.0 mm Bending speed: ca. 120 Grad/sec compressed air: 6.0 bar work height max.: 869 mm control: POS 2000 voltage: 400 V total power requirement: 7.2 kW weight: 3430 kg Current new price ~ 100.000 euros From a maintenance workshop With very good equipment () Equipment: - CNC electric motor-driven universal swivel bending machine High-precision mechanics with modern control technology For individual and series production Robust high-speed machine with high axis speeds Torsion-free welded construction - Rotatable upper beam / as automatic tool change system With 2x tool stations (sharp and goose foot bending rail) Reduces set-up and idle times Eliminates time-consuming tool changes and adjustments - SCHRÖDE ...
maximum number of results exceeded
please refine your search
