We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,649 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Tapping machine Hagen & Göbel HG 16 C 12/16 1.950 € VB Pick-up only 39114 Saxony-Anhalt - Magdeburg 01.03.2023 3 Description Offer Tapping machine Hagen & Göbel HG 16 C 12/16 with coolant tank/pump without quill guide spindles and the tool holders (Fig. 1-6) The machine is sold to our customer due to a business change. It is operational and functional as far as it works. Manufacturer: Hagen & Goebel Soest Type: verm TB C 12/16 Ref. 2226 Year built:1993 Cutting capacity: depending on the material 4-56 mm at 14-28 m/min see performance plate Drive power: 3AC 380 V, 41.1/7.1 A 1.2 kWQ Engine: KBA 100 A 6 Coolant tank: approx. 25 l gesch. Cooling center pump: TB40/220-x 380V, 0.25 A, 12 kW, 2700 1/min, 50 l/min Accessories: no Dimensions: approx. HxWxD 1500 x 990 x 1400 mm Weight: approx. 750 kg estimated Condition: used see photos The machine is stil ...
used
Internal threading machine Hagen & Goebel type HG 124 Masch. No. 4112 Year of construction approx. 1980 Cutting capacity M 3 to M 18 in brass M 3 to M 10 in steel projection 250 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm. Motor power 0.55 / 1.0 kW Mains connection 380 volts, 50 Hz - 6 speed levels via belt change (3 steps via belt + 2 engine speeds) - Table height adjustment with rack via hand crank on the round column - without guide cartridge - Drill chuck 1 to 13 mm- Tool holder 25 mm cylindrical shaft holder Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg good condition; used
used
Guide cartridges for Hagen & Goebel tapping machines Machine type HG6 Original price at the manufacturer 322.-€ net. I offer them the guide cartridges at half the original price. There are several inclines, please inquire about the required incline.
used
used
Charging for forklift battery suitable for 40 cells 80 Volt 40 Ampere good condition More used loaders 24Volt, 48Volt, 80 Volt from 55 amperes to 200 amperes at the camp, please ask. Special price
used
Strapping machine #4626 Machine size: 900 x 550 x 1700 mm
used
Radar system, radar system -For more information, see photos
used
There are four carton sealer Hagenauer + Denk available, 2x T-55, 1x HD-55-5-5-7 contra 70/50-50, 1x HD-55-5-5-7=70/50-50, year of construction machine 1/ 2/ 3/ 4: 2014/ 2011/ 2005/ 1992, with documentation.
used
thread dia.: 3 - 10 mm Tools speed: 120 - 600 U/min table-size: 250 x 350 mm throat: 250 mm voltage: 380 V threading length: 80 mm total power requirement: 0,55 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 0,7 x 0,7 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
thread capacity: M 16 threading depth: 80 mm throat: 250 mm table-size: 400 x 500 mm spindle turning speed range: 9: 280 - 1800 U/min quill stroke: 80 mm thread capacity: min. M 4 mm dayligth: 315 mm spindle taper: B 18 thread capacity: in Alu: M 22 total power requirement: 2,2 kW weight of the machine ca.: ca. 200 kg dimensions of the machine ca.: xxxxxx 0,86/1,17 m Condition: ready for operation: CE signed: Electric 380 Volt: Base: Automatic thread cutting machine in table design, threads with conductive cartridge, single and continuous stroke, tap breakage protection,switching from ri- to le-running via double friction clutch that means only the work spindle will switched, pole-changing motor, faster return, column height adjustable, intervention protection secured by a magnetic switch. The thread cutting performance refers to material ST 37. Minimum quantity lubrication make HPM ...
used
Escape sign luminaire, escape route luminaire, emergency and escape route lighting, emergency lights, escape routes, emergency lighting -Dimensions: 380/190/H90 mm -Connection: 230 V -Number: 11x lights available -Price: per piece -Weight: 1.9 kg/piece
used
Specifications: Tapping capacity M 10 – M 45 Cutting capacity in ST M 36 Recording MK 2 Motor power 4 kW Speeds 35 – 185 rpm
used
General SKU338T910 LocationBarneveld MakeUhde Hagen TypeB 560 No.1858022/6 Year of construction1987 Pressure Working pressure25 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume111.6 Ltr. Pressure25 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel Capacity111.6 Ltr. Vessel sizes370x1120 mm Dished bottomcheck With covercheck Top connectionsDN 40, DN 25 OutletDN 25, DN 15, 1/2 Max. temperature-40/50 °C Information Mounted on legscheck Weight400 kg Floorspace0,75x0,9 m Total height2,2 mPressure vesselsUhde HagenTanks > Pressure vesselsBrand > Uhde Hagen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for man ...
used
General SKU338T920 LocationBarneveld MakeUhde Hagen TypeF 600 No.1858022/2 Year of construction1987 Pressure Working pressure25 Bar Number of horizontal pressure tanks1 Main Features MaterialStainless steel Volume35 Ltr. Pressure25 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Notified bodyTÜV Capacity35 Ltr. Vessel sizesdia. 307.9x542 mm Dished bottomcheck With covercheck OutletG 1½ Max. temperature120 °C Information Mounted on legscheck Weight360 kg Floorspace0,7x0,75 m Total height1,6 mPressure vesselsUhde HagenTanks > Pressure vesselsBrand > Uhde Hagen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more ...
used
General SKU338T905 LocationBarneveld MakeUHDE Hagen TypeF650 No.1858022/5 Year of construction1987 Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume30 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Notified bodyTÜV Capacity30 ltr Vessel sizesDia: 228x959 mm Dished bottomcheck With covercheck Top connectionsDN 40 OutletG 3/8 Max. temperature-40/120°C Information Mounted on legscheck Weight200 kg Floorspace0,7x0,6 m Total height1,85 mPressure vesselsUhde HagenTanks > Pressure vesselsBrand > Uhde Hagen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Neth ...
used
Description: Machine number 1635 Including vice, jaw width 100 mm table surface area l x w : 350x250 mm, weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 800 x 600 x 1,900 mm
used
General SKU001A039 LocationBarneveld MakeUHDE Hagen No.2578 Year of construction1978, Internal coil built in 1991 Pressure Working pressure300 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4306 (304L) Stainless Steel Reactors ReactorHigh pressure Capacity20 Ltr Vessel sizesdia. 215x600mm Dished bottomcheck Dished top sidecheck With jacket/Electric heating Internal heating spiral(0,8 Ltr) Max. temperature350 Degr. C. With anchor stirrercheck (built in 1991) Motor0,55 KW, 220/380 Volt (Ex) Speed mixing shaftvariable (± 155-1120 Rpm) Information Mounted on legscheck Floorspace0,9x0,9 m Total height2,2 m Weight850 kg ATEX compatiblecheck Extra Specifications- Vessel does not have a bottom outlet Minerals & inorganicAPIPlastic & polymersDyes & pigmentsAgrochemicalsSo ...
used
Dimensions (L/W/H): 660x1050x1600 mm metric thread: M 33 Messing metric thread: M 16 Gußeisen metric thread: M 14 Stahl no. of flutes: 25x10mm 2x T-Nuten throat: 220 mm weight: 730 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: tapping machine Thread diameter 3 - 10 mm Tool speed 120 - 600 rpm Table size 250 x 350 mm Projection 250 mm Operating voltage 380 V Thread length 80 mm Total power requirement 0.55 kW Machine weight approx. 0.35 t Space requirement approx. 0.7 x 0.7 x 1.9 m Approx. Onsite Dimension. (l x w x h): 700 x 700 x 1,900 mm, weight approx.: 350 kg
used
used
Manufacturer: Wright Engineers cable diameters from 25 mm to 160 mm can be processed. Cables with PVC, rubber and iron ammization Drive 380 V Weight: 1740 kg Condition: new Diameter of cables to strip from 25 mm - 160 mm can strip cables with pvc, rubber, and also with armouring out of iron drive: 380 V weight: 1740 kg NEW MACHINE Every time we have 8 different cable-strippers on stock. New and second-hand machinery
used
Steel tank 30000 litres / 30 m³ / underground tank / firefighting water tank / double-walled / Rain water recovery tank / water cistern good condition, underground storage tanks, water tank, underground tank, diesel tank, heating oil tank, double-walled steel tank, Content: 30 m³ / 30000 litres Material: steel tank according to DIN 6608 Dimensions / size: approx. Ø 2.00 m x approx. 10.00 m long Weight: 6 tons Other: outside with bituminous insulation, double-walled, incl. test certificates. The container is used, inside empty and properly cleaned. According to the age traces are present. Steel tank / container can manure, as a storage tank for water, AHL, ASL, seeping juice, canola oil, rain collection tank, used fire-fighting water tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your de ...
used
S13 - used approx. 10 m³ / 10,000 litres underground tank, steel tank, firefighting water tank, cistern. technical details: capacity: approx. 10 m³ / 10,000 litres material: steel tank weight: approx. 3 tons dimensions: approx. Ø 1.6 m x 5.20 m Used steel tank in good condition, coated in bituminous insulation or bitumen paint, underground storage tank, lid and connections on the top. The tank has been emptied and professionally cleaned inside. According to the age traces of use are present. It is in good condition, yet slight insulation damage caused by transport or the excavation may be present on the outside. This container can be used as a storage tank for water and many different media. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it ...
used
S07 - used approx. 20 m³ / 20,000 litres steel tank, double-walled, underground tank, fire-fighting water tank, water cistern. In good condition, double-walled steel tank, lying horizontally, underground storage tank, water tank, diesel fuel tank, heating oil tank. volume: approx. 20 m³ / 20.000 litres material: steel tank length: approx. 6.00 m diameter: approx. Ø 2.00 m weight: approx. 4,0 t Outer side with bituminous insulation or bitumen coating. Used storage container, emptied and professionally cleaned inside. According to the age traces of use are present. Lightest damage and small dents to the insulation due to the excavation process. The tank is fully functional. This steel tank can be used as a storage container for many different media. On demand we can also modify it as a fire-fighting water tank, just ask us. Price upon request. Transport c ...
used
Under table saw Wadkin Cutting width 300 mm Cutting height 80 mm pneumatically raised with rolling table and stop L 2.0 m L x W x H: 2.5 x 0.8 x 1.1 m Weight approx. 480 kg Built in 1975 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Diameter cable: approx.18 to max. 180 mm Separation speed: approx. 32 m/min Drive control: approx. 11 kW Dimensions: approx. 1880 x 1400 x 1560 mm Weight: approx. 1,900 kg Knife adjustment: hydraulic Height adjustment: hydraulic Condition: used, operational
used
DEMONSTRATION MACHINE Cable cutting machine Maxi 100 Manufacturer: Grimo Diameter cable: 6 - 100 mm Separation speed: 40 meters per min Dimensions (L x W x H): 700 x 700 x 1270 mm Weight: 165 kg Drive: 2.2 kw / 400 V Knife adjustment: mechanical
new
: 5000 kg height: 800 mm width: 1200 mm : nein : 1200 x 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 5000 kg height: 500 mm width: 1200 mm : nein : 1200 x 100 mm : 1,2 x 0,53 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 15000 kg height: 790 - 1350 mm width: 2000 mm : ja : 120 x 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Underfloor drilling unit suitable for IMA - incompatible with a Weeke plug
used
Water tanks & extinguishing water tanks USED & RECONDITIONED Muensterlandtanks.de Container and tank trading A used steel tank in the size of 50,000 Ltr. is offered. Volume: 50,000 Ltr. Material: Steel tank tank, material S235JRG2 Tank shape: cylindrical, horizontal, double-walled Diameter 2.50 m, length approx. 10.50 m Exits: Dom on the top Departures top Tank according to DIN 6608 or 6616 Condition: Tank cleaned from the inside and provided with a new bitumen coating from the outside. Suitable for above-ground and underground storage of water, process water, rainwater, feed etc. Location Ascheberg. Transport can be arranged cost-effectively. The loading of the container on trucks or trailers is free of charge! For use as an extinguishing water tank, the tank can also be equipped with a fire brigade extraction device according to DIN. The fire brigade equipm ...
used
Water tanks and extinguishing water tanks USED & REFURBISHED Muensterlandtanks.de Extinguishing water tank, extinguishing water tank, storage tank, cistern, AHL, ASL, diesel tank, heating oil tank, water tank, service water, extinguishing tank, buffer, buffer tank, extinguishing water tank, water tank A used steel tank in the size of 60,000 litres is offered. Volume: 60,000 Ltr. Material: steel tank tank, material S235JRG2 Tank shape: cylindrical, horizontal, double-walled Diameter 2.50 m, length approx. 12.50 m Exits: Dom on the top Finishes at the top Tank according to DIN 6608 Condition: Tank cleaned from the inside and provided with a new bitumen coating from the outside. Suitable for above-ground and underground storage of water, industrial water, rainwater, animal feed, etc. Location Ascheberg. Transport can be organized inexpensively. Loading the container ...
used
Water tanks and extinguishing water tanks USED & REFURBISHED Muensterlandtanks.de Extinguishing water tank Extinguishing water tank Storage tank Cistern AHL ASL Tank Underground tank Slurry tank Polyester tank GRP tank PE tank Ferric chloride tank Iron III water tank Steel tank Molasses tank By-product tank Oil tank Pressure tank Irrigation Irrigation Riding arena irrigation ebb and flow system Sports field irrigation Diesel tank Fuel oil tank Yard filling station Tank water facility Water tank Service water extinguishing tank Buffer buffer tank Extinguishing water tank Water tank Container and tank trade Call us: 0162 1341979 A used steel tank in the size of 100,000 litres is offered. Volume: 100,000 Ltr. Material: steel tank tank, material S235JRG2 Tank shape: cylindrical, horizontal, double-walled Diameter 2.90 m, length approx. 15.50 m Exits: Dom on the top Finish ...
used
New devices that are no longer needed Product information "Eaton Undervoltage Release, 208-240VAC 259499" The Eaton Low Voltage Release, 208-240VAC 259499, is an optional accessory that offers an extensive portfolio of applications for worldwide use. Its installation is flexible and easy thanks to modular functional groups. The use of the undervoltage release enables an immediate shutdown of the circuit breaker NZM, or switch-disconnector N when the control voltage drops below 35-70% US. The undervoltage release, when de-energized, prevents the main switch contacts from touching during switch-on attempts, which ensures high safety. The undervoltage release is not at the same time as leading auxiliary switch NZM. -XHIV.. or working current release NZM.. -XA.. can be installed. It is suitable for circuit breakers and load switches. The rated control supply voltage Us at AC 50 Hz is ...
used
The C500 sub-vacuum consists of a double bell to optimize the packaging process. It allows the packaging of products under vacuum and in a protective atmosphere. Each bell has 2 welding bars. TECHNICAL DETAILS: - Machine dimensions (d x w x h): 1050 x 1600 x 1065 mm. - Bell dimensions (d x w x h): 745 x 650 x 200 mm. - Weight: 650 kg. - 4 casters including 2 directional - Synthetic loading plates for the bell. - Bell in standard execution. - Bell cover for bell height 200mm. - 2 parallel weld bars, l = 650 mm, front and rear. - BUSCH pump of 250 m3 FEATURES: - Auto shut-off function with boiling point recognition. - Fully graphic display - Emergency vacuum stop - Intuitive operation - Accurate vacuum measurement via vacuum detector - 18 selectable languages - Program brief for 29 recipes.
new
IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drills ...
used
Electron welding system under VACUUM 2001 (modernized in 2010) Factory No.: 6201120
new
: 2000 kg height: 500 mm width: 1200 mm : nein : 1200 x 100 mm : 1,2 x 0,53 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 15000 kg height: 790 - 1350 mm width: 1200 mm : ja : 790 - 1350 mm : 120 x 1200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 2000 kg height: 500 mm width: 1200 mm : nein : 2000 x 100 mm : 2,0 x 0,53 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 2000 kg height: 800 mm width: 1200 mm : nein : 1200 x 100 mm : 1,2 x 0,8 x 0,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 2000 kg height: 1080 mm width: 1500 mm : nein : 1500 x 100 mm : 1,5 x 0,53 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Comments: used engine block only Item Code: 1109094u Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 320 Gas Type: Biogas Eng Ser No: 4868381 powerup.at - Technology is our drive. Efficiency our focus.
used
offer 22543 Specifications: - Saw blade dimensions 350 x 3.2 x 40 mm - Saw blade speed 3200 rpm - Cutting range at 90° 115 mm - 115 x 120 mm - 200 x 80 mm - Miter adjustable left + right - Drive 400 V / 2.0 kW - Space requirement approx. W 700 x H 1500 x D 900 mm - Weight machine approx. 80 kg - with: - Saw blade - Clamping pole - Stop rail 3000 mm
used
used
There is a complete underwater pelletizing system with vibrator, heat exchanger, centrifuge, extruder, pelletizer, water basin, sieves, knife blocks, documentation and other spare parts available, a sieve changer is available separately, an inspection is possible.
used
Substructure clamp, pneumatic power clamp, with retractable centering mandrel and integrated clamping hook TÜNKERS SZD 50 UZ SZD 50 UZ 29.9-0.05 ( SZD50UZ29.9-0.05 ) Centering mandrel: Diameter: Ø 28 mm, length (extended): 46 mm with sensors used, tested ! Dimensions: 375 x 100 x 105 mm
used
Substructure clamp, pneumatic power clamp, with retractable centering mandrel and integrated clamping hook TÜNKERS SZD 50 UZ SZD 50 UZ 29.9-0.05 ( SZD50UZ29.9-0.05 ) Centering mandrel: Diameter: Ø 30 mm, length (extended): 36 mm with sensors used, tested ! Dimensions: 365 x 100 x 105 mm
used
Foil set HASBERG Size: 100 x 500 3 x 0.1 mm 4 x 0.3 mm 5 x 0.4 mm 3 x 0.5 mm Stainless ! New ! Dimensions(packed): 515 x 115 x 70 mm