british flag
Resale Logo

grinding discs single used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used rubber machines  SGT SERVIS,spol.s r.o.  http://www.sgt.cz 
banner logo
start page > keywords grinding discs single > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
121686801 109  

ATLAS COPCO GA 708 PE for sale
Screw air compressor Atlas Copco GA 708 PE


Screw air compressor Atlas Copco GA 708 PE Fully automatic, internally fully piped and wired compressor plant in very low noise compact structure; single-stage oil injected compressing, lufgefkühlt. Usable volume fl ...

 
Screw air compressor Atlas Copco GA 708 PE

Fully automatic, internally fully piped and wired compressor plant in very low noise compact structure; single-stage oil injected compressing, lufgefkühlt.
Usable volume flow rate, in accordance with DIN in 1945 at the outlet from the compact system measured and related to Ansugbedingungen pe at maximum operating pressure: 8 bar 122 1/s; 7.32 m ³/min

The compression system is designed for operating pressures of 4 to 8 bar

Main features:
-integrierten after cooler with water separator and autom. Condensate drain. An oil separator ensures low oil pressure air
-vollautomatische full load idle intermittent control with manual selector switch for Druchlaufbetrieb for economic compressor operation

Technical data:
Speed of the Haupläuffers: 4.020 min
-Leistungsbedraf including fans, based on the compressor shaft at working pressure pe: 8 bar 53.1 kW
7 bar 49.7 kW
6bar 46.3 kW
at idle, 16.5 kW
Noise level measured according to CAGI Pneurop at 1 meter distance: 74 dB(A)
Cooling air volume 108 m³/min
Compressed air outlet temperature 32 ° C
-Umgebungstempereatur max 40 ° C
Oil fill quantity 38 L
Residual oil content of compressed air 5 mg / m ³
Dimensions (Lxwxh) 2770 x 1136 x 1600 mm
Weight 1020 kg

Technical data of electric equipment, make Siemens:
Three-phase motor with squirrel-cage rotor
Rating 55 kW
Nominal speed 3000 rpm
Voltage / frequency 380 V 50 Hz
Protection class IP 23 F
Design B-5

 
Price  
    request
121686786 1300

BAUDIN 881 E for sale
Glasschleifmaschine


Grinding machine for straight edges, for grinding and fine polishing straight edges, phases and Miters from 0-60 ° Data: -Glass thickness: 3-25 mm -Min. size: 80 x 120 mm -maximum dimensions: 3 x 3 mm or greater ...

 
Grinding machine for straight edges, for grinding and fine polishing straight edges, phases and Miters from 0-60 °

Data:

-Glass thickness: 3-25 mm
-Min. size: 80 x 120 mm
-maximum dimensions: 3 x 3 mm or greater
-Power: 15 kW
-Machine dimension: 6500 x 1600 x 2500 mm
-Speed: 0.4-4.2 m / min
-Weight: 2600 kg

Price: â?¬17,500 in stock
 
Price  
    request
121685850 104

KUHLMANN FSM 2 for sale
Grinding machine tools


Technical data: Brand: Kuhlmann Type: FSM 2 Table size 160 x 630 mm Table movement in X 250 mm Table movement in Y 190 mm r. distance between table and grinding spindle Center 260 mm 2 spindle speeds through  ...
used machine
 
Technical data:

Brand: Kuhlmann

Type: FSM 2

Table size 160 x 630 mm
Table movement in X 250 mm
Table movement in Y 190 mm r. distance between table and grinding spindle Center 260 mm
2 spindle speeds through flat pulley levels 300 and 6000 RPM.
Grinding wheel diameter 100-175 mm
Spindle drive 380 V 2800 RPM. 0.37 kW
Space 700 x 900 x 600 mm
 
500 €  
    request
121685611 104

WALDRICH COBURG 15FS2525 for sale
Double Column Slideway Grinding Machines


Conventional Bed Grinding Machine Table size 1250 x 5000mm Distance between column 1850mm Height 1350mm
used machine
 

Conventional Bed Grinding Machine

Table size 1250 x 5000mm
Distance between column 1850mm
Height 1350mm

1979
Price  
  KR   request
121669360 206

KALLESOE A/S K 20 / E for sale
Carcass clamps


Automatic corpus press KALLESOE A / S type K20 / E year 1998 Engine No. No. 33938 / 98 This special designed body press K20E is made for the production of cabinets. The special body press spans together a whole ward ...
used machine
 
Automatic corpus press KALLESOE A / S type K20 / E year 1998
Engine No. No. 33938 / 98

This special designed body press K20E is made for the production of cabinets.
The special body press spans together a whole wardrobe in a single operation, including shelves, sides and rear paneling.
The parts of the Cabinet are held by fixtures and vacuum heads before the Cabinet is compressed.
The range is set 4 ball screws which compress even the Cabinet.
A servo motor ensures that each clamping clamping pressure is equal.
The machine is controlled via a touch panel: the corpus press is set automatically on the basis of entered dimensions and values on the correct measure and the correct clamping pressure.
The here shown special body press is ready for shipment
the finished cabinets equipped with an underlying belt railway with roles.

Technical data
Clamping width min./max.: 190/1200 mm
Clamping height Min/Max: 200/1200 mm
Clamping depth min./max.: 200/400 mm
Working height: 500/1000 mm

Specifications subject to

Automatic case press KALLESOE A / S type K20 / E year of manufacture 1998
Machine no. No. 33938 / 98

This specialized case press K20E is designed for the production of cabinets.
The special corpus press clamps on entire cabinet together in a single operation, including shelves, sides and rear panelling.
The parts of the cabinet are held in place by holding devices and vacuum heads, before the cabinet is compressed.
The edge width is adjusted via 4 ball screws, that so compress the cabinet.
A servo motor ensures that the edge pressure is the same for every clamping operation.
The machine is controlled via a touch panel: the body press is automatically switched on and off by means of a touch panel.
of the entered dimension and values are set to the correct dimension and clamping pressure.
The case press special shown here is designed for further transport.
of the finished cabinets are equipped with a belt conveyor with rollers behind it.

Technical specifications
Clamping width min. / max.: 190/1200 mm
Clamping height min. / max.: 200/1200 mm
Clamping depth min. / max.: 200/400 mm
Working height: 500/1000 mm

Technical data subject to change
1998
Price  
    request
121669304 709

PROBAT UW 801 for sale
Coffee grinders


Mill for grinding coffee probat UW 801 after overhaul
used machine
 
Mill for grinding coffee probat UW 801 after overhaul
 
Price  
    request
121653303 801

SAKURAI Oliver 72 E 2 for sale


-Single colour size 52x72 cms. -Olivermatic alcool dampening with Chiller -Year 1996, 50 mil. copies -Quick clamps, all accessories, in production now
used machine
 
-Single colour size 52x72 cms.
-Olivermatic alcool dampening with Chiller
-Year 1996, 50 mil. copies
-Quick clamps, all accessories, in production now
1996
7,000 €  
  IT   request
121653233 1403

A1 STEEL SHEDS Portal Steel Building for sale
Prefab Steel Framed Warehouse Hall


Prefabricated portal steel framed warehouse (30.6 x 22.3 x 4/5.15 m) build in 1995 designed for storage of agricultural implements and equipment / machinery, now up for deconstruction. The primary steel work consists of  ...
used machine
 
Prefabricated portal steel framed warehouse (30.6 x 22.3 x 4/5.15 m) build in 1995 designed for storage of agricultural implements and equipment / machinery, now up for deconstruction. The primary steel work consists of a prefabricated, hot-rolled, hot-dip galvanised steel profiles. The wall cladding (of single skin trapezoidal steel panels) can be reused.

FUTURE USE:
machine shop for forestry / agriculture, warehouse, workshop, barn / Hall for horses and much more.

DIMENSIONS in accordance with documents:
Built-up area: 682.38 sqm (30.6 x 22.3);
Floor area: 666.60 square metres (30.3 x 22.0);
Width of the Hall: 22.30 m AK trapezoidal sheet;
Width of the Hall: 22.00 m AK steel frame;
Hall length: 30.60 m AK trapezoidal sheet;
Hall length: 30.30 m AK steel frame;
Grid length: 5.00 m MM steel support;
Eaves height: 4.00 m UK Trauf edge;
Ridge height: 5.15 m OK first.
Snow load: 75 kg / m2;

HALLS structural:
portal frame structure made of hot rolled, thermal galvanised steel profiles. Uprights and trusses are made of IPE 400 euro profiles. The framework columns are bolted on the foundation anchors.

ROOF CLADDING:
corrugated fibre cement panels mounted on to galvanised Z-purlins. .

WALL CLADDING:
single skin trapezoidal steel sheet.

FACILITIES:
two sectional shutter doors; one pedestrian door;

DOCUMENTATION:
copies of the original structural design calculations and drawings from 1994/1995.

LOCATION:
North Rhine-Westphalia. Visit by appointment.

AVAILABILITY:
to be agreed upon.

NET PRICE:
fair purchase offers are welcome.
1995
Price  
    request
121636956 202

HOFMANN TFS 1200, stufenlose Drehzahl for sale
Swivel spindle cutter, rotary cutter


Sturdy swivel milling machine TFS1200 by Hoffmann from vocational school with stepless speed adjustment Drive motor 5 / 6, 2kW with automatic motor brake R/L barrel Swivel angle from - 5 to 45 degrees electrically a ...
used machine
 
Sturdy swivel milling machine TFS1200 by Hoffmann from vocational school with stepless speed adjustment

Drive motor 5 / 6, 2kW with automatic motor brake
R/L barrel
Swivel angle from - 5 to 45 degrees electrically adjustable with digital display
Height adjustment electrically adjustable with digital display and in Krems Valley display
Speeds in 100 steps adjustable from 1000 to 10000 RPM
Spindle diameter 30 mm
Control Panel up, swivel
Comfort fence with fine adjustment by Handwheel and display of the total stop (as in incremental Valley counter null-adjustable), additional display of the single jaw
Stop rotating and elevating device away swiveling (for arc milling etc.)
pull-out workpiece support
2 AB table extensions with inset wood
Aigner integral stop 500 mm on both sides
3-roll feed Holzher 1117 with 8 speeds, R/L barrel, almost as good as new
New roles
Feed socket
Dust nozzle 2 x 120 mm
Emergency stop switch
Original condition, school machine

Dimensions approx. 1450 x 1300 x 1700 mm (Lxwxh). Weight approx. 1300kg.

Please the PDF file with our terms and conditions and order form.
The machine can be demonstrated like by appointment with us on-site. We offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider".
1994
9,400 €  
    request
121632737 203

WEINIG HYDROMAT H23C for sale
Four-sided planing machines


-machine in stock -After reviewing the technical -very good condition -year of manufacture 2001 TECHNICAL PARAMETERS: PLANER: -planing width 230 mm -planing height 180 mm -spindle diameter 50 mm -the maxim ...

 
-machine in stock
-After reviewing the technical
-very good condition
-year of manufacture 2001

TECHNICAL PARAMETERS:

PLANER:
-planing width 230 mm
-planing height 180 mm
-spindle diameter 50 mm

-the maximum diameter 220 mm

-the feed rate to 80 m/min
-adjustable feed on the inverter

1) head the lower 15 kW
2) head right 11 kW
3) head left 11 kW
4) upper head 11 kW
5) upper head 18 kW
4) lower head 22 kW

-electrically height-adjustable
-electrically adjustable upper heads
-pneumatic clamps

-cardan shafts feed
-five top steel roller
-the two upper rollers, rubber
-four rolls in the worktop extending

-auxiliary pressure on the left of the head
-the last two heads on podtrzymkach
-nozzle diameter 140 mm

SYSTEM ADMINISTRATION:
-packet length 6100 mm
-width: 1200 mm
-height 1300 mm
-the possibility of stacking two packages at the same time
-for
-the brackets to the narrow items
-chain feeder 2500 mm
-initial material segregation
-Cross-feeder Planer 1500 mm
-hydraulic Accelerator

SYSTEM:
-conveyor 7000 mm
-the receiving table transverse conveyor 2100 mm
-receiving rollers-powered 6000 mm
-receiving roller and adjustable flame launchers, 7100 mm
-gravity rollers receivers

Automatic line strugaj?ca Weinig is a system for improving productivity, while increasing its efficiency. Solutions of this type are directed to the companies that make the process of automation of production facilities. Planing process elements is operated by two persons who are responsible for the initial choice of material and the reception. The principle of operation of the line shall be as follows, the material is delivered with a forklift on the chain conveyor, which thanks to its long sleeps two packages at the same time. This affects directly the effectiveness as it unfolded one of the operator can immediately place again at the right place, without downtime caused by not delivering material by fork-lift truck. Rozsztalowania system tilts the entire package and raises it at the same time, releasing the single guides layers that directly hit the chain feeder. The individual elements at this stage pass prequalification for those suitable for planing and waste. Material not suitable for further processing is separated by an operator who has a position at this stage, who, through the button adjusts the rollers stop line continuity by what material falls under the tray and does not goes to the Planer. Material that has passed segregation and is suitable for further stage goes through gravity rollers for another chain feeder. At the end of the feeder is equipped with a system of rollers and hydraulic Accelerator, which is responsible for moving items from the tray to the Planer Weinig Hydromat H23C. Planing process then takes place elements that has the possibility of processing them at speeds up to 80 m/min. Integrated system of elements after the planing them tape feeder table transverse equipped with automatic system dump the material. At this stage, ready to cross conveyors transporting it over the core. Material when you hit the Skate moved
is them to ejectors which expel material on gravity rollers where they are received by the employee. The line is the ideal solution for companies who appreciate the quality and the efficiency of the elements. Planer is able to meet even the most demanding expectations, while the system input and output only to increase its performance.
 
Price  
  PL   request
121632735 104

KEHREN L 25 S - 8 cnc for sale
Surface Grinding Machines


GO vertical grinding machine - mod. L 25 S - 8 cnc / 1992 / loop length 2500 mm / grinding width 830 mm / workpiece height 400 mm / magnetic table 2500 x 800 mm / grinding motor 110-550 kW - rpm / segment head diameter  ...
used machine
 
GO vertical grinding machine - mod. L 25 S - 8 cnc / 1992 / loop length 2500 mm / grinding width 830 mm / workpiece height 400 mm / magnetic table 2500 x 800 mm / grinding motor 110-550 kW - rpm / segment head diameter 900 mm / segments 210 x 120 x 40 mm / cnc Siemens Sinumerik 3 G / grinding motor feed: 0,5 to 35 m / min -infinitely variable / coolant flow: 1000 l / min / coolant tank: 8000 lt / dresser with adjustable axle only for segment head / new SchleifmaÃ?e can be entered in the Sinumerik, which is then also the grinding head automatically to the required height adjust / good condition
Fe.gi.Maschinen.SBG.at

RETURN 25 S - 8 cnc surface grinding machine - vertical mod L / year 1992 / grinding length 2500 mm / grinding width 830 mm workpiece height 400 mm / magnetic table 2500 x 800 mm grinding motor 110-550 kW / segment head diameter 900 mm / step 210 x 120 x 40 mm / cnc Siemens S inumerik 3 G / grinding motor feed: 0.5 to 35 m / min - infinitely variable / coolant flow rate: 1000 l / min / coolant tank: 8000 lt / dresser with adjustment axis only for segment head / new grinding dimensions can be entered into Sinumerik, in which case the grinding head automatically adju STS to the appropriate height / good condition
Fe.gi.Maschinen.SBG.at
1992
Price  
    request
121632676 1402

DÜRRKOPP Type Hängeförderer for sale
FASHION HANGING GOODS WAREHOUSE


The three-Storyed suspension goods storage rack is a Trolleyanlage for 20,000 parts per level. Total capacity 60.000 parts. Dürrkopp is the manufacturer of the system. Type suspension conveyor. I ...
used machine
 
The three-Storyed suspension goods storage rack is a Trolleyanlage for 20,000 parts per level.
Total capacity 60.000 parts.
Dürrkopp is the manufacturer of the system. Type suspension conveyor.
It's a manual system.

Specs: thigh measurement: ca 1100 x 4550 mm floor height: ca: 2500 mm Division: 21 shelf rows to 7500 mm length, of which 19 double and 2 single shelf lines.
Mounted version: 21 stock gears with an aisle width of 800 mm per warehouse floor buying shelving for flat packed goods are slope 3-tier 600lfm Abhöngerohr of Furthermore charges possible.

Price does not include installation. Plant is disassembled and can also be supplied at an additional cost.
2010
39,500 €  
    request
121632669 706

SILMO / OKEMA Favorit IV 110 v Nr:1168 for sale
Bottle cleaning machines


Sold is a diving room sterilizer ozone in perfect condition. The machine was presented annually by Silmo / Okemo overhauled. Incl. ozone generator and various bottle counting single (from winery)
used machine
 
Sold is a diving room sterilizer ozone in perfect condition.
The machine was presented annually by Silmo / Okemo overhauled.

Incl. ozone generator and various bottle counting single (from winery)
1985
4,900 €  
    request
121632650 303

SIPA S.P.A. 16.000 bph in 1 L for sale
Integrated Bottle Production and Palletizing


Integrated bottle production and palletizing system with SIPA ECS-FX 12/40 This is a complete integrated bottle production and palletizing line starting from resin granules to ready palletized and stretch wrapped o ...
used machine
 
Integrated bottle production and palletizing system with SIPA ECS-FX 12/40

This is a complete integrated bottle production and palletizing line starting from resin granules to ready palletized and stretch wrapped on pallet. Bottles are made with SIPA ECS -FX is an integrated system of preform production from resin with injection molding and stretch blow molding to ready containers. This machine can produce very versatile type of containers, like standard PET bottles and customized lightweight bottles for standard or hot fill use, ultra clean or aseptic bottles, pasteurizable containers, warm filled bottles, wide mouth bottles and jars, round or square shaped bottles, oval, asymmetric etc. Resin material can be PET, OPP, PEN, PLA, Recycled PET, and Regrind PE. Palletizing system consist Kawasaki ZD 250S palletizer robot, Italian Zecchetti made conveyor systems and Dutch Matco made pallet wrapper.

Main features of SIPA ECS – FX integrated system:
• Highest single-step output for beverage bottles, hot fill bottles and wide mouth containers.
• Very good output per capital ratio.
• Possibility of simultaneously producing 2 different containers having different weights.
• Possibility of simultaneously producing containers for different applications (i.e. wide
mouth on one side and oval containers on the other).
• Machines can be configured with different cavitation on the 2 sides of the machine (i.e. 32
cavities on one side and 40 on the other).
• Machine can be equipped with different types of preform conditioning on the 2 sides.
• Wide range of custom containers: Hot-fill (narrow neck & wide mouth); oval containers; large sizes.

Technical Data and Characteristics:
Delivered by SIPA S.p.A
Delivery year 2004
Integrated bottle system SIPA ECS FX 12/40
Number of injection cavities 110
Number of injection molds 4
Number of total cavities 40
Injection mold pitch 76 mm
Number of cavities per mold 10
Number of blow molds 2
Blow mold pitch to 2.5 L 107 mm
Capacity 16 000 bph in 1 liter
Used container sizes 330 ml, 500 ml and 1000 ml
Neck finish Standard 32 mm screw cap
Machine main dimension 14.2 x 4.0 x 3.7 m (L x W x H)
Machine weight (SIPA) 45 000 kg
HP Air Compressor Atelier Francois CE46B – year 2011
Resin silo 25 m3
Palletizing robot Kawasaki ZD 250S
Bottle conveyor system / buffer Zecchetti
Pallet size 1200 x 1000 mm
Pallet wrapper Matco SLC
2004
Price  
  FI   request
121632642 104

MOORE 450 CP for sale
Jig Grinder


X-travel: 450mm, y-travel: 280mm, table dimensions: 280x610mm, table top to wheel collet: 50-450mm, spindle housing vertical travel: 320mm, vertical slide travel: 89mm, grinding hole diameter: 0.4-127mm, speed: 1500mm/mi ...
used machine
 
X-travel: 450mm, y-travel: 280mm, table dimensions: 280x610mm, table top to wheel collet: 50-450mm, spindle housing vertical travel: 320mm, vertical slide travel: 89mm, grinding hole diameter: 0.4-127mm, speed: 1500mm/min, rotational speed: 2-300/min.
1997
Price  
  DE   request
121632640 104

SAIM 400-3E for sale
Surface Grinding Machine


X-travel: 320mm, y-travel: 190mm, installation height: 280mm, grinding wheel dimensions: 180x32x16mm, vertical adjustment: 270mm max., rotational speed: 3000mm/min max., magnet clamping plate dimensions: 300x150x65mm, le ...
used machine
 
X-travel: 320mm, y-travel: 190mm, installation height: 280mm, grinding wheel dimensions: 180x32x16mm, vertical adjustment: 270mm max., rotational speed: 3000mm/min max., magnet clamping plate dimensions: 300x150x65mm, length: 950mm, width: 1000mm, height: 1450mm, weight: 280kg, including accessories.
2016
Price  
  DE   request
121632638 104

MATRA MF 6A for sale
Surface Grinding Machine


X-travel: 600mm, z-travel: 200mm, grinding wheel dimensions: 225x25x51mm, working height: 388-450mm, connected load: 2.8kW, length: 2500mm, width: 1350mm, height: 2000mm, weight: 1.4t.
used machine
 
X-travel: 600mm, z-travel: 200mm, grinding wheel dimensions: 225x25x51mm, working height: 388-450mm, connected load: 2.8kW, length: 2500mm, width: 1350mm, height: 2000mm, weight: 1.4t.
 
Price  
  DE   request
121632636 302

CINCINNATI MILACRON CM 1/90 for sale
Single Screw Extruder


Screw diameter: 90mm, length: 25 D, rotational speed: 15-150/min, torque: 5738Nm, load rating of axial bearing: 1010kN, drive power: 90.7kW, hopper load: 88l, extruding height: 990mm, water inlet: ¾inch, water outlet: 1 ...
used machine
 
Screw diameter: 90mm, length: 25 D, rotational speed: 15-150/min, torque: 5738Nm, load rating of axial bearing: 1010kN, drive power: 90.7kW, hopper load: 88l, extruding height: 990mm, water inlet: ¾inch, water outlet: 1¼inch, water consumption: 0.5m³/h, water supply: 1.5bar, connected load: 204kW, length: 4447mm, width: 970mm, height: 1817mm, weight: 3.05t.
 
Price  
  DE   request
121632632 104

LIDKÖPING CL 660 for sale
Centerless cylindrical grinding machine


Grinding diameter 5-175 mm Grinding wheel diameter 610 mm Control wheel width 610 mm Grinding wheel width of 610 mm maximum workpiece length at the plunge grinding 605 mm Grinding wheel bore 304.8 mm Velocity of 63 ...
used machine
 
Grinding diameter 5-175 mm
Grinding wheel diameter 610 mm
Control wheel width 610 mm
Grinding wheel width of 610 mm
maximum workpiece length at the plunge grinding 605 mm
Grinding wheel bore 304.8 mm
Velocity of 63 m/sec.
Rule disk diameter 330 mm
Control wheel width 610 mm
Disc speed from 10-750 RPM.
Rule slice angle-adjustable 5 °
Total power demand 40-100 kW
Machine weight approx. 14 t
2007
Price  
    request
121632566 409

SASIB BEVERAGES S.P.A. Simonazzi Magazzino Casse Vert for sale
Automatic Crate Magazine Vertical Storage System


Automatic Crate Magazine Vertical Storage System SIMONAZZI An automatic crate magazine storage system made by SASIB in 1998. The system consists of two magazine storages. The larger magazine stacks crates in three par ...
used machine
 
Automatic Crate Magazine Vertical Storage System SIMONAZZI

An automatic crate magazine storage system made by SASIB in 1998. The system consists of two magazine storages. The larger magazine stacks crates in three parallel rows, it has two infeed and two outfeed lanes of conveyors and the storage capacity is over 600 crates. The other magazine has the capacity of over 200 crates, is built upon a single conveyor lane and both the infeed and outfeed are from the same side. The storage magazines have been used as buffers between crate washer and packer and before palletizer. The capacity of the original line was 80.000 bph.

Technical data
Manufacturer: SASIB Beverages S.p.A., Italy
Year: 1998
Type: SIMONAZZI Magazzino Casse Vertical
1998
Price  
  FI   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter