g 6200 used for sale

Used approx. 3 m³ / 3,000 litres polyester tank / GRP tank, transportation tank, Staffelstein tank, good condition. Dimensions: H = 2, 00 m (tank) H = 2, 50 m (total) W = 1, 00 m L = 1, 60 m (tank) L = 1, 70 m (total) Overground, upright tank, incl. 4 steel feet/ cones, dome on the front, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personal ...

Granulator especially designed for inline size reduction of thin film (like BOPP / BOPET). Feeding via roller feeder. Extreme througput rate ! brand: NEUE HERBOLD made in germany - heavy duty model - drive 250 kW - size reduction of film - feeding via roller feeder - Rotor diameter: 800 mm - working width: 1950 mm - for very high throuput rates for the size reduction of film, tangled or bunched tapes and bands, PP big bags, crates or other hollow containers, BOPP / BOPET / PP in-line and off-line film extrusion lines.

Surface grinders - horizontal ELB-SCHLIFF perfect B-10 SPS Second-hand machine Grinding length: 1000 mm Grinding width: 400 mm Workpiece height: 450 mm Table size: 1000 x 400 mm Grinding wheel dimensions: 300 x 50 mm Grinding spindle motor: 3.5 kW Table speed: 2-30 m / min Grinding wheel speed: 1500 rpm Magnetic plate size: 1200 x 500 mm Total power: 15 kW Machine weight approx.: 4,5 t Space requirement approx.: 3.5 x 2.5 x 2.5 m General overhauled by 2015 with 12 month warranty Paper machine Magnetic clamping plate 1000 x 400 Automatic dressing device with compensation 1 flange Items put up

Used machine as good as new Grinding length: 600 mm Grinding width: 400 mm Workpiece height: 450 mm Table clamping area: 600 x 400 mm Grinding wheel dimensions: 300x50 mm Grinding spindle motor: 3.5 kW Table speed: 0 - 30 m/min Grinding wheel speed: 0 - 35 m/s Magnetic plate size: 600 x 400 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t Room requirements approx.: 3.5 x 2.5 x 2.5 m 12 month warranty Paper filter machine Automatic table dressing with compensation 1 pc. flange Setting-up elements

P109 - used approx. 50 m³ / 50,000 litres polyester silo / GRP-silo, vertically standing, with funnel and support frame 3 x 3 m, in good condition. Twice in stock. volume: approx. 50 m³ / 50,000 litres material: polyester / GRP diameter: approx. Ø 3.00 m height silo: approx. 8.50 m height with support frame: approx. 12.00 m The container can be used as storage silo for water, liquid feed, flour, whey, potato steam skins, salt brine, dried fodder, molasses, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers  ...

MWM TCG 2016 V 12 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

MWM TCG 2016 V 16 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

Recon Part number: 1230 2078 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

SUB: FOR SALE... USED 2 SET BBC COMPLATE VTR 714E-32 T/C AT TURKEY... EMERGENCY HAVE A GOOD DAY. .WE HAVE USED 2 SET BBC COMPLATE VTR 714E-32 T/C AT TURKEY. AND READY TO LOAD ON TRUCK. OUR T/C SPECIFICATION AS BELOW MOY 1988 SERIAL NO.: X. 140769 / 140770 V 01113 R - H 04010 W 05206 E 03010 U 03 I 01800 T 01100 BOTH T/C ARE IN VERY GOOD CONDATION. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay BEST of regards; Aliaga marine services E-mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Sander Press Feed Type 260/40 Technical Data: 1. Feed (infinitely adjustable) 60 - 260 mm feed angle 118 degrees 2. Gripping distance per rail 40 mm gripping angle 58 degrees 3. Gripping railprof11 (T-nut pro1? 80 x 25 mm 4. Gripping rail position closed 305/350/395/440 mm 5. Gripping rail ingestion flat guide 6. Gripping rail slurl 2687 mm 7. Gripping rails 1323 mm 8. Gripping bracket width 73 mm 9. Position of the connection shaft basic geraet - outlet rim I 121 x 260mm outlet gable I - spout scope II 121 x 600mm 10. Diameter of the connecting shaft 11. Transport air above the press table 12. Drive by press (joint shaft) 13. Adjusted air pressure of the locking cylinders gripping 3.0bar 14th weight 1100 kg

Diesel generator set 125 KVA Iveco 6Zylinder year 1994,6900 hours Schallgedämmt. Ready and available in 59557 Lippstadt Nationwide delivery cheap Ask for more'm under 0172 72 653 24 available daily 8-22 h

Recon Part number: 1216-3235 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

M. No: 01/6675917

Gear Deutz 816 NEW Part number: 0405 4284 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

type RMG 980 200/100 Recon Part number: 1214 0250 Please note: We have various other RECON parts from different manufacturers and types available. We like to send you our current store reserves.

FOR SALE... OVERHAULED TURBOCHARGERS ABB VTR 254-11 & BBC VTR 214-11 TO WHOM IT MAY CONCERN; WE VE BELOW LISTED OVERHAULED & REPORTED TURBO CHARGERS AT OUR STOCK. READY TO TRANSPORT AND USE... ABB VTR 254-11 HZTL 428765P2 nNmax 523 nBmax 497 tMmax 680 C tBmax-650 C SFUSO1 YEAR OF BUILT 2010 MADE IN SWITZEWRLAND BBC VTR 214-11 NoHT 399285 their 635 Tmax 680 V 01113 R 012 H 04109 W 12206 E 03221 U 023 YEAR OF BUILT 2012 MADE IN SWITZERLAND IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CIONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

RECON Part number: 1214 1745 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Thank you for your interest in our gum extruder system we offer you as follows: many thanks for your interest on our new chewing gum extruder plant, please follow our offer find: AUTOMATIC EXTRUDING; ROLLING AND SCORING MACHINE 7 ´ ´ /. COMPLETE LINE for production of chewing gum sticks and Chiclets Manufacturer: WLS Type: Chewing gum Extrudier-, rolling and cutting machine gum extruder, rolling and cutting system Product: Chewing gum sticks and Chiclets Size (working width): 7 ´ ´ / 177mm other dimensions are possible on demand Type: WLS RAS 7 "with manual take-off Capacity: Approx stick gum. 200-250 kg / h / Chiclets approx. 250-350 kg / h Number of rolling stations: 4 Number of cutting stations: 2 Electrical: 400V 3 ph 7 "ROLLING AND SCORING MACHINE incl. EXTRUDER Conveyor belt is covered with powderin ...

Generator set 60 kVA (hood unit) performance: 60 kVA / 48 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: FPT_IVECO Engine model: NEF45SM1F Engine type: Four-stroke diesel Type of injection: direct Kind of aspiration: turbocharger Cylinder, number and layout: 4-L Total displacement: 4.5 l Cooling system: Liquid (water + 50% glycol) Specifications engine oil: ACEA E3 - E5 Fuel consumption 100% PRP: 16.7 l / h Fuel consumption 75% PRP: 13 l / h Fuel consumption 50% PRP: 9.5 l / h Oil consumption under full load: 0.1% of fuel consumption Control: Mechanical Inner diameter output exhaust pipe: 70.3 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-3 11 ' 1/2 Insulation protection class: Class H Mechani ...

Generator 200 kVA (hood unit) power: 200 kVA / 160 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: FPT_IVECO Engine model: NEF67TE3F Engine type: Four-stroke diesel Type of injection: direct, common rail Kind of aspiration: turbocharger and subsequent cooling Cylinder, number and layout: 6 L Total capacity: 6.7 l Cooling system: Liquid (water + 50% glycol) Specifications engine oil: ACEA E3 - E5 Fuel consumption 100% PRP: 45.5 l / h Fuel consumption 75% PRP: 41.9 l / h Fuel consumption 50% PRP: 29.9 l / h Oil consumption under full load: 0.5% of fuel consumption Controls: Electronic Inner diameter exhaust pipe output: 70 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-3 11 ' 1/2 Insulation protect ...

Recon Part number: 0337 9970 6/8 cylinder Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Generator 250 kVA (hood unit) power: 250 kVA / 200 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: FPT_IVECO Engine model: C87TE3F Engine type: Four-stroke diesel Type of injection: direct, common rail Kind of aspiration: turbocharger and subsequent cooling Cylinder, number and layout: 6 L Total capacity: 8.7 l Cooling system: Liquid (water + 50% glycol) Specifications engine oil: ACEA E3 - E5 Fuel consumption 100% PRP: 59 l / h Fuel consumption 75% PRP: 48 l / h Fuel consumption 50% PRP: 35.7 l / h Oil consumption under full load: 0.5% of fuel consumption Controls: Electronic Inner diameter output exhaust pipe: 102 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-3 11 ' 1/2 Insulation protection c ...

Unit 601 kVA (hood unit) power: 601 kVA / 481 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: MTU Engine model: 12V1600G10F Engine type: Four-stroke diesel Type of injection: direct Kind of aspiration: turbocharger and subsequent cooling Cylinder, number and layout: 12 V Total displacement: 21 l Cooling: Coolant Specifications engine oil: S10 W40 Fuel consumption 100% PRP: 116,99 l / h Fuel consumption 75% PRP: 90,94 l / h Fuel consumption 50% PRP: 63,06 l / h Oil consumption under full load: 0.5% of fuel consumption Controls: Electronic Inner diameter output exhaust pipe: 106 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-3 11 ' 1/2 Insulation protection class: Class H Mechanical protection typ ...

1 factory-tested ceiling crane girder Lifting capacity 3000 kg Wingspan approx. 6,800 mm Hook way approx. 8,000 mm Make MAN GHH Year of production/workshop testing 1988/2016 equipped monorail trolleys, short type, freely movable floor control Working speeds: Hoist around 0.8/8.0 m / min Trolley gear approx. 4.0/16.0 m / min Crane chassis approx. 8.0/32.0 m / min

1030 kVA generator (hood unit) performance: 1030 kVA / 824 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: MITSUBISHI Engine model: S12H PTA Engine type: Four-stroke diesel Type of injection: direct Kind of aspiration: turbocharger and subsequent cooling Cylinder, number and layout: 12 V Total capacity: 37,11 l Cooling system: Water Specifications engine oil: API CD or CF SAE 30 or SAE 40 Fuel consumption 100% PRP: 216,75 l / h Fuel consumption 75% PRP: 166,78 l / h Fuel consumption 50% PRP: 117,52 l / h Oil consumption under full load: 0.8 g / kWh Controls: Electronic Inner diameter output exhaust pipe: 212 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-0 18 " Insulation protection clas ...

1006 kVA generator (hood unit) performance: 1006 kVA / 805 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: MTU Engine model: 16V2000G26F Engine type: Four-stroke diesel Type of injection: direct Kind of aspiration: turbocharger and subsequent cooling Cylinder, number and layout: 16-V Total displacement: 35.7 l Cooling system: Water Specifications engine oil: ACEA E4, E6, E7, E9 Fuel consumption 100% PRP: 197,66 l / h Fuel consumption 75% PRP: 150.58 l / h Fuel consumption 50% PRP: 140,52 l / h Oil consumption under full load: 0.8% of fuel consumption Controls: Electronic Exhaust pipe outside diameter: 200 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-0 18 " Insulation protection class: Cl ...

1 factory-tested, very well-preserved single-girder crane Lifting capacity 3,200 kg Span approximately 6,000 mm hook path Max 12,000 mm Make DEMAG Year of production/workshop test 1993/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist CA. 1.0/6.3 m / min trolley gear approx. 14.0 m / min crane chassis 10.0/40.0 m / min

1 factory-tested, very well-preserved single-girder crane with angle trolley load approx. 4,000 kg Load trolley CA 5,000 kg Wingspan approx. 7.100 mm Make steel Year of production / workshop testing 1986/2016 Crane radio control equipped with angle trolley for a perfect hook road, Working speeds: Hoist 0.5/3.25 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested single girder overhead travelling crane lifting capacity 5000 kg Span around 10,000 mm Hook way max. 5.000 mm Make steel Year of production/workshop test 1983/2016 Crane equipped with steel monorail trolley, freely movable floor control Working speeds: Hoist 0.5/3.4 m / min Trolley gear 16.0 m / min Crane chassis 4.0/16.0 m / min

1 factory-tested, very well preserved single girder crane angle load approx. 5,000 kg Wingspan approx. 10,000 mm Hook path about 7,500 mm Make steel Workshop examination 2016 Floor control equipped with angle trolley for optimal hook path, freely movable working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 4.0/16.0 m / min

2 factory-tested, well preserved double girder cranes Load capacity 5000 kg Wingspan approx. 13.630 mm Hook way approx. 4,000 mm Fabrikat MAN-SWF Year of production/workshop test 1995/2016 Cranes, floor control, freely movable equipped with SWF double girder trolleys, travels to the lower straps of the crane bridges Working speeds: Hoist approx. 0.8/5.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, well preserved double girder crane Load capacity 5000 kg Span width 14.780 mm Hook path maximum approx. 8,000 mm Make RÖTTGER/Demag Workshop examination 2016 Floor control freely movable with DEMAG double girder trolley, Working speeds: Hoist approx. 0.8/8.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 plant be certified, very well received. Single girder overhead travelling crane with angle trolley Load approx. 5,000 kg Wingspan approx. 16.750 mm hook path maximum approx. 8,000 mm Make VOITH Year of production/workshop test 1993/2016 equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation including load beam, with frequency control, maintenance Jetty, radio control Working speeds: Hoist up to 20.0 m / min Trolley gear up to approx. 26.0 m / min Crane chassis up to approx. 90.0 m / min

1 factory-tested single angle crane in design with laterally movable carrier trolley Load approx. 5,000 kg Span approximately 33,000 mm Hook way max. 9000 mm Make AUMUND/steel Year of production/workshop test 1981/2016 with steel angle trolley for maximum hook path, DEMAG Kranfahran- drove, corridor control freely movable Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear 10.0/40.0 m / min Crane chassis up to 60.0 m / min

1 factory-tested double girder overhead travelling crane Load approx. 6,300 kg Wingspan approx. 14,000 mm Hook path Max 10.000 mm Make steel Workshop examination 2016 Crane equipped with steel double girder trolley, corridor control working speeds: Hoist approx. 0.8/10.0 m / min Trolley gear approx. 14.0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 14,200 mm Hook path about 8.000 mm Fabrikat DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 19.134 mm Hook path about 8.000 mm Fabrikat ABUS/DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

2 factory-tested, well preserved single girder cranes Payload 7000 kg Wingspan approx. 16.650 mm Hook way approx. 4,000 mm Fabrikat DEMAG/MAN-SWF Workshop tests 1987/1991/2016 Cranes equipped with DEMAG and SWF monorail trolleys with short design, freely movable floor control Working speeds: Hoist CA. 0.3/3,1 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

2 factory-tested, well-preserved single girder suspension cranes Payload 10.000 kg Gauge approximately 17,700 mm Lifting height Max approx. 9,300 mm Make MAN / SWF Year of construction/workshop test 1987 1990/2016 Service life approx. 3 years with SWF monorail trolleys short type, long travel rate programs, freely movable floor control Working speeds: Hoist CA. 0,8/8 m / min Trolley gear approx. 20 m / min Crane chassis approx. 40 m / min

1 factory-tested, absolutely like new single angle crane Payload 10.000 kg Wingspan approx. 26.610 mm Hook path about 10,000 mm Make DEMAG Year of production/workshop test 2001/2016 Crane equipped with electric wire rope hoist moving on the side of the vehicle, cross and long travel frequency controlled remote control, Working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear (FU) approx. 0-30,0 m / min Crane chassis (FU) approx. 0-40.0 m / min

Key data: 420 , 525 , 400

Execution: unit type: mobile version: Schallgedämmt technical data motor: motor manufacturer: one motor type: D 2842 LE engine power: 424 KW cooling: water-cooled starting: electric 24 V DC speed: 1500 rpm fuel: fuel oil EN 590 Technis Che data generator: generator manufacturer: Ansaldo FKI generator type: M 7B 316 LD 4 generator power: 525 kVA voltage: 400 / 231 volts power factor: cos. -phi 0.8 speed: 1500 rpm switchgear: execution: auto-start features: peak-load operation switch: generator switch 3 pin delivery: built tank: execution: double-walled litres: 1,000 dimensions of the unit: width approx. mm: 2350 height mm: 3.260 length mm: 9.230 weight KG: 10,600 use: State: well get built: 1992 delivery: immediately Verl price net in â?¬: on request: hours of operation: 701 location: Verl - Germany

1 factory-tested, very well-preserved single-girder crane Load trolley CA 10,000 kg Lifting capacity crane approx. 20,000 kg Wingspan approx. 39,500 mm hook path approximately 15,000 m Make helper / ABUS Year of production / workshop testing 2012/2016 Crane equipped with floor control as emergency steering, ABUS monorail trolley, radio control Working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear infinitely variable approx. 1.0 20.0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested, absolutely Mint double girder crane as crane trolley with 2 elevators, particularly suitable for traverse operation Load approx. 2 x 6,300 = 12,600 kg Span 14,950 mm hook path about 6,000 mm Make steel Year of production/workshop inspection 2002/2016 Crane equipped with Swivel trolley, maintenance stage, split head support for optimal wheel load distribution, radio control working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear about 2.5/10.0 m / min Crane chassis up to approx. 40.0 m / min

1 factory-tested, well preserved steel double girder overhead travelling crane Load approx. 16,000 kg Track width approx. 13,500 mm hook path approximately 3,600 mm Katz gauge approximately 4,200 mm Year of production / workshop test 1990/2016 Crane equipped with double girder trolley and steel drive units suitable for traverse operation, radio control, catwalk and overload protection Working speeds: Hoist CA. 0.6/4.0 m / min Katz LG 4.0/16.0 m / min Crane chassis 4.0/16.0 m / min

10,000 pieces of grating gratings for pallet shelves galvanized Insertion grids available in different sizes, mesh widths, support rod and weight load: Negotiation price: from € 5,-- net per piece from stock Price with € 5,-- refers to the insert ingerate with the size 24.5 x 104.5 cm Larger quantities on request! Insertion grid Mesh width 80 x 89 cm 2.5 x 2.5 cm 99.5 x 49.5 cm 3 x 3 cm 99.5 x 99.5 cm 3.5 x 3.5 cm 100.5 x 98.5 cm 4.5 x 1.1 cm 104.5 x 24.5 cm 6.5 x 3 cm 108.5 x 111 cm 6.5 x 6.5 cm 120 x 89.5 cm 7 x 3.5 cm 120 x 109 cm 7 x 4.5 cm 125.5 x 59 cm 7 x 7 cm 128.5 x 81 cm 129 x 118 cm support rod 132.5 x 111 cm 20 mm x 2 mm 134 x 76.5 cm 25 mm x 2 mm 134 x 92 cm 30 mm x 2 mm 134.5 x 99.5 cm 35 mm x 2 mm 134.5 x 122 cm 40 mm x 2 mm 143.5 x 124 cm 45 mm x 2 mm 157.5 x 81 cm 170 x 150 cm 179 x 121 cm Used goods, very good condition, see  ...

1 very well preserved double girder crane ideally suited to the transport and use of long goods crane driving towards Load approx. 4 x 4,000 = 16,000 kg track width approx. 20.565 mm Hook path about 6.500 mm Make steel Year of construction/renovation 1990/1993 Workshop overhaul 2016 FEM 3 m Crane equipped with high-quality wind factory units, synchronous and separately controllable to apply loads, radio control Working speeds: Hoist CA. 1,2/12.0 m / min Trolley gear approx. 5.0/20,0 m / min crane chassis approx. 10.0/40.0 m / min

Capacity 20.000 kg Wingspan approx. 9,450 mm Hook way approx. 23,000 mm Make HEIMANN/SWF Year of production/workshop review 2006/2016 Crane radio control equipped with SWF double girder trolley, Working speeds: Hoist approximately 0.67/4.0 m / min Katz LG 5.0/20,0 m / min Crane chassis up to 30.0 m / min

Key data: 1000 , 600 , 400

Surface grinders - horizontal ELB perfect BD 10 PLC Second-hand machine overhauled 2014 Surface grinders - horizontal ELB-SCHLIFF perfect BD 10 PLC Second-hand machine Grinding length: 1000 mm Grinding width: 600 mm Workpiece height: 600 mm Table size: 1000 x 600 mm Grinding wheel dimensions: 400 x 100 mm Grinding spindle motor: 11 kW Table speed: 2-30 m / min Grinding wheel speed: 0-35 m / s U/min Total power consumption: 35kW Machine weight approx.: 6 t Space requirement approx.: 3.8 x 2.5 x 2.5 m Part of 2014 overhauled with 12 month warranty Paper machine Magnetic clamping plate 1000 x 600 Automatic dressing device with compensation 1 flange Items put up