fuji 52 used for sale

FUJI PROOFGERAET PICTROSTAT 400 D Built in 2001 Manual is available. Inks and papers are also available The former Nettoneupreis DM 63.900,00 General Fujifilm Pictrostat 400 d With the 400 d Fujifilm Pictrostat, Fujifilm presents its digital full color copier for prints up to format DIN A3. By combining the functions of the High-performance digital printer Pictrography and the copying of his little brother Pictrostat 300 Pictrostat 400 d was launched very successfully in the German market. As also the Pictrography, Pictrostat 400 d with the Thermoentwicklungs-works and -transfer process, which completely without chemicals comes out and basically like a Image separation works. Only water, light, heat, pressure, become the processing Need photo paper and the donor paper developed by Fujifilm. This eco-friendly Method to produce prints in photo quality has ...

Fuji Full Leg Spine Mount Tripod (mobile) with Fuji LongView Cassette (LC) 35.4x124.5 cm

CTP Platesetter Fuji Luxel V6 E; State as is; Development machine Amber 85; Printing plate stackers. CTP system Fuji Luxel V6 E; condition as is; processor Amber 85; plate stacker.

Film processing machine Fuji FG 400; good condition; cleaned and tested; Working width 400mm; Daylight cassette. Film processor Fuji FG 400; good condition; cleaned and checked; working width 400mm; Daylight Cassette.

Fuji Quartz III 125 Printing Plate Processing Machine; good condition; cleaned and tested; Inlet width 1250mm, min.200mm; Panel length max.1500mm; Refrigerator. Plate processor Fuji Quartz III 125; good condition; cleaned and checked; working width max.1250mm, min.200mm; plate lenght max.1500mm; Chiller.

Used High-speed Horizontal form-fill-seal machine Fuji Alpha VII 3430 is specifically designed to package various sizes of product for a variety of industries. Machine type :FW3430/B End sealer diameter : B125 Capacity :10 to 100 packs/min Cut length: 130 to 430 mm (Up to 3,999 mm according to the spec.) Product size to be wrapped Width: Up to 170 mm Height: Up to 30 mm Wrapping film width: up to 650 mm Outside diameter: up to 300 mm Wrapped products properties: Individual food, chemicals or manufactured products Wrapping materials properties: Film which can heat and seal Motor capacity: 3.39 kW Heater capacity: 3.15 kW Electric supply source Three-phase AC 200 V 50/60 Hz 30 A (Transformer for other voltage included) Power consumption 6.54 kW

Manufacturer: FUJI Model: Accuaty 1600II LED (hybrid version with tables) Year: 2015 including white and lacquer, including tables for plate printing If applicable, number of prints: 11,229 m2 Availability: May, is still in operation Defects: Light cyan printhead may have to be replaced. Price: on request

4 up Violet CTP Fuji Model: Luxel V4-Man 100 M Built: 2010 Inlcude RIP+ Software Include Glunz & Jensen processor (built 2010) Price: on request

4 up Violet CTP CTP FUJI V6 Full automatic with feeder for 3 formats plates, in-line die-cutting, Glunz&Jensenn imager and stacker B2 format in perfect technical and visual condition Price: on request

Fuji CR System FCR Profect CS with: Reader IR 363 First processing station 5 IP Cassettes Type CC/ 10 IP Cassettes Type C_verschiedene sizes • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "as-is" condition ex warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a sp ...

FUJI KING DEBARKERS CAPACITY 200t/h ( one double section 60 t/h) USED EQUIPMENT, DISASSEMBLED, WASHED, LOADED ON TRUCKS AND CONSOLIDATED IN CONTAINER. MODEL KD6/50DT (EACH DEBARKER) YEAR OF MANUFACTURE 1995 TECHNICAL SPECIFICATIONS OF EACH EQUIPMENT: • TWO (2) DOUBLE ROTOR SECTIONS EACH. • SECTION LENGTH OF 7.65 mt (25') • TOTAL LENGTH OF 15.3 mt (50´) • WIDTH OF THE INTERIOR COMPARTMENT OF PIECES OF 2.4 mt. • MAIN ROTORS DIAMETER 0.9 mt. (36”) x LENGTH 7 m (23’) • POWER SYSTEM: 2 ENGINES 575 V 60 Hz 100 HP CONNECTED TO THE REDUCER MOTOR AND DRIVING THROUGH CHAIN. • VARIABLE SPEED FROM 16 TO 50 RPM. • DISCHARGE DRIVEN BY VERTICAL CHAIN AND MOTOR 575 V 60Hz 3HP • NET WEIGHT: 42 TONS PER SECTION - 2 SECTIONS 84 tons TOTAL. EACH KIT DOES INCLUDES: ❖ WAIST BARK BELT CONVEYOR ❖ FEED ROLLERS ❖ SUBSTRUCTURE FOR SUPPORTING FOUNDATIONS, CONSI ...

FUJI CR-IR 363 System 4x Stacker for CR-Cassette inc. PC / High Resolution Monitor / Keyboard / mouse ADVANCE Console / DR-ID 300CL APL. Software V8.0 / # INCL. MAMMO SOFTWARE OPTION # tested some CR Cassette ́s exw Germany

1 of used sleever, make Fuji Seal Europe, Intersleeve 3200 DE, new 2000. Siemens S7 controls (with upgraded applicator controls). Steam-tunnel. Last sleeving 500 ml PET bottles at a speed of 21.600 bph.

Fuji Imaging Plate System / CR System FCR Profect One (Mammo) with: First processing station 6 IP cassettes type M: 18x24 - 3 pcs. / 24x30 - 3 pcs.

Fuji Capsula XL II CR System incl. PC / Monitor / Keyboard / CD / manuals tested from technican #Welcome to inspect & test # EXW Germany

1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press Shinohara Fuji 52 N+P Year 1988 - Serial-No. 1001871 Size min. 105 x 148mm - Size max. 360 x 520mm Paperweight 0.04 - 0.4 mms Dampening system conventionel Plus Version Numbering and Perforation Unit Powderspray Quick clamp plate change -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

2 x FUJI Luxel V 9600 for sale for Violet CTP 1 x Luxel V 9600 form year 2005 with Processor Glunz & Jensen CF 126 year 2005 1 x Luxel v9600 form year 2008 with Processor Glunz % Jensen Cf 125 year 2010 both with RIP

General SKU300M410 LocationBarneveld MakeFuji Paudal Co.ltd TypeEXDFS-100 No.19034 Year of construction1988 Specified Features - Roll compactor MaterialStainless steel Roll compactors Granulatorcheck Flat diecheck Die sizes260 x 160mm Number of dies available:1 Die perforationdia. ± 3mm Motorcheck With variable speed drivecheck Trough sizes315 x 180mm With motorcheck With variable speed drivecheck With metering screwcheck Screw sizesdia. ± 100mm With hoppercheck Information Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace1,3x1,2 M Total height1,4 M Weight900 KG Technical specs Extra informationtrough sizes: 315 x 180 mm: screw dia. ± 100mm: die sizes 260 x 160 mmRoll compactorsFuji PaudalCompactors > Roll compactorsBrand > Fuji Paudal What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...

Base Machine is a OMSO DM44N 2-Lane Lid Machine, age 2004, L- Format in feed conveyor for feeding Vertical Lid Stacks, acts as an accumulator as well Auto feeding of Lid Stacks to the 2 x Universal Screw Denesters with suction Nipples Infeed conveyor with Vacuum to keep Lids in proper position Each Lane with PAGOmat 6HS Pressure Sensitive Label dispensers, with PLC Controls, manufactured by PAGOmat/ Fuji Seal, Switzerland Outfeed Conveyor to 2-Lane Lid Stacker 2-Lane Stacker, each Lane with 2 x Universal Helical Screws Main Drive with a variable frequency, AC-Synchronous Motor with a brake, with Microprocessor Controls Max. dia. of round Lids: Ø125 mm Max. dimensions of Rectangular & Oval Lids: 125 x 150 mm Max. height of Lids: 25 mm Speed with Oval Lids dimensions 120 x 130 mm: Single Lane 110 Lids/ min, Dual Lane 220 Lids/ min 400 V, 3 phase, 50 Hz

The FDR D-EVO Suite is the flexible entry-level DR system. Optionally, one, two or even three wireless detectors can be used. The batteries can be charged via a charging station or an optional cable, so you have a ready-to-record detector at all times. (Source: Fujifilm.eu) Used system from a clinic and is equipped with a digital detector system. In very good technical and optical condition.

Sleever for PET bottles or tamper evident sleeves, made in 1997

Sleever for PET bottles or tamper evident sleeves, made in 1997, with tunnel

Size 36 x 52 cm Perfecting 1/1, 2/0 + version Powder spray Conventional dampening Numbering and Perforating In good working conditions Free of damages or repairs .

Code 6377 Omschrijving Ruimautomaat Abrikaat Nachi Fujikoshi Type BV 2A 15 Model NUV 5 CDH Bouwjaar 1982 Capaciteit 15 Ton Max. slag / stroke 1700 mm Snelheden 7000 mm/min Vermogen 35 kVA – 50 HZ

Power: 22.4 kW (12/7 — 35°C) Heating capacity: 25 kW Year of manufacture: 2007 Refrigerant circuit: 1 pc. Type of refrigerant: R407C Compressors: 2 pcs. Copeland (scroll) Number of fans: 2 pcs. Dimensions: 1.30 x 0.70 x 1.37 m Weight: 307 kg Condition: excellent Product quantity: 3 pcs.

Air conditioner, air conditioning -Power: 6.5 kW -Type: AOY24FNBK -Dimensions: 900/365/H645 mm -Weight: 80 kg

Computer, server, control unit, control unit, keyboard, screen, control -Manufacturer: FUJITSU -Type: PRIMERGY RX300 -Dimensions: 750/485/H90 mm -Weight: 25 kg

16 diots HQ rip

Output: approx. 20 to 250 pieces per minute Format range: approx. 140 mm width max. approx. 60 mm height max. Foil width: approx. 430 mm max. Foil section: approx. 80 to 350 mm Net weight: approx. 800 kg

Output : approx. 20 to 250 pieces per minute Format range : approx. 140 mm width max. approx. 60 mm height max. Foil width : approx. 430 mm max. Foil section : approx. 80 to 350 mm Net weight : approx. 800 kg

We sell 466 x Fujitsu Esprimo P7011 Tower: A0405599 Performance PC+ Tower Fujitsu Esprimo P7011 1 x FPC52071GK ESPRIMO P7011 ESTAR 1 x FPCPS028GK Power supply Gold 280W 1 x S26461-F5801-E308 Intel Core i7-10700 2 x FPCEN719GK 16GB DDR4-3200 1 x S26462-F5801-E503 DVD SuperMulti SATA slim (tray) 1 x FPCHG132GK SSD PCIe 1024GB M.2 NVMe SED (Gen4) 1 x S26462-F3500-E201 HDD SATA III 2000GB 7.2k (3.5') 1 x FPCHG262GK Mounting kit for first 3.5' 1 x S26361-F2930-E101 country package (DE) incl. power cable (Euro), safety manual (DE) 1 x S26483-K521-E120 Keyboard KB521 DE USB marble grey 1 x S26462-F1010-E103 Lic Win10 Pro 1 x S26462-F1010-E200 Load Win10 Pro(64) MAIN+Office 1mthTrial 1 x S26463-F2542-E223 USB Optical Mouse Grey 1 x S26462-F5801-E870 MAC-address on PC & delivery note 1 x MFY:SEND-HW-INFO HW Vendor sheet configurable via MFA SOC 1 x CUZ:PRO-MGT-RTE_EM Projec ...

We sell 500 x Fujitsu Lifebook 640, 14" monitor, i5 processor, 16GB memory, 512GB disk LTE module In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available complete systems and co ...

We sell 2 x Fujitsu DX500-S5 Storage each consisting of 21 x 950GB SSDs Total count of SSDs: 42 and: 4 x Brocade G610 switches 8 ports/ 8 x 16GB SWL SFP AC In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is ...

We sell 1.) 2 x Fujitsu Eternus DX60-S3 2.) 2 x Fujitsu Primergy RX2540-M2 In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available complete systems and components in refurbished cond ...

With documentation and some accessories, an on-site inspection is possible, but not under power.

Size: 66 x 83 cm Equipments: HQ RIP 16 Dioden

with drip tray (positive thermal for Fujifilm PXE) and Graphoteam Compact Bridge, Forklift, Trolley

length in total: 3400 mm band width: 1000 mm conveying height: 1100 required space: 3,4 x 1,2 x 1,70 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump -Connection: 380 volts -Power: 0.75 kW -Delivery rate: 285 l/min -Dimensions: 600/240/H330 mm -Weight: 32 kg

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Hydraulic control block comes from a Hitchi Seiki HC400 machining center -Manufacturer: Nachi-Fujikoshi -Valve type: SL-G01-E3X-GR-Ci-11 -Valve type: SL-G01-C5-GR-C1-11 -Voltage: 110 V -Pressure: max. bar -Price: for all 6 pieces of valves -Dimensions: 158/45/H84 mm -Weight: 1.5 kg

Sheet straightening machine The maximum thickness of the sheet is 40 mm; The minimum thickness of the sheet is 8 mm; The maximum sheet width is 3200 mm; The number of working rollers is 9; Number of support rollers 2; Number of pressure rollers 2; The engine power is 300 kW Length – 12300 mm; Width – 3200 mm; Height – 10840 mm; Total weight – 420,000 kg;

Pulse generator, handwheel, CNC control -Manufacturer: Fujitsu Fanuc, Pulse Generator -Type: A860-0200-T021 -Quantity: 2x Pulse Generator available -Price per piece -Dimensions: 122/122/H136 mm /140/120/H120 mm -Weight: 1.1 kg/pc.