franÇois used for sale

Air Compressor Atelier Francois CE68 A, 40 bar with Dryer and Air tank Two air compressors, both type CE68A. made by Atelier Francois, Belgium in 2001 and 2000, capacity FAD is 35 Nm3 /min. with discharge pressure of 40 bars. The delivery includes the skid mounted 3–stage intercooled oil-free piston compressor and 1.000 litre galvanized 40 bar pressured air tank, separately installed stainless steel air dryer with integrated 1 micron air filter and radiator cooler. Air dryer has refrigerant cooled stainless steel plate heat exchanger which condensates the moisture from air. Both compressors are installed and in operation till end of 2023. Compressor Manufacturer: Atelier Francois, Belgium Model: CE68A Serial no: 20G200 Manufacturing year: 2000 and 2001 Capacity FAD: 2100 m³/h at 40 bar Operation hours: 37000 and 27000 (still running) Speed: 480 rpm Electric motor: ...

High pressure compressor Atelier Francois CE 68 A Ateliers Francois Compressor Model: CE 68 A SG40 Year of construction: 2005 Capacity: 35 m³/min Pressure: 40 bar incl. cooler and pressure vessel The machine is still installed and in operation. It can be visited on site during production.

Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air re ...

High pressure compressor Atelier Francois CE 68 A Ateliers Francois Compressor Model: CE 68 A SG40 Year of construction: 2006 Capacity: 35 m³/min Pressure: 40-42 bar Electrical power: 355 KW incl. cooler and pressure vessel The machine is still installed and in operation. It can be visited on site during production.

Manufactured: Atelier Francois Type: CE 68B Capacity: up to 2600 m3/h Electric motor: 450 KW Electrical connection: 3 x 400 V / 50Hz Complete with: •Electrical cabinet with Star/Delta start with microprocessor L1 •Dryer type Hankinson •Radiator cooling system •Electrical connection between control cabinet, motor, dryer

Air Pressure: 40 // Delivery Rate: 1320

Used PET Complete Bottling Line 6000 bph yom 2007 40 bar compressor Ateliers Francois 1 1 Hankison compressed air dryer 1 2 EVAPCO Europe 4 5 6 6R 41T 50 50 compressor cooler 1 30 2 70 2 60m Blow molding machine SIPA 1 50 0 90 1 90m Receiver D80 1 8 m high Preform loader for supplying pre forms to the Automatic heating and blowing machine 1 30 1301 90m Unloading hopper Elevator for pre forms SIPA 1 60 1 60 3 00m PET triblock SGE TRI BLOC S317 2 10 1 90 4 00 4 60 2 20m Saturator for saturation of CO2 SGE Saturatore 1 5 1 5 2 5m Elevator and conveyor for feeding plugs 1 0 1 0x4 0m Labelling machine SGE OXE 2 20 1 95 1 90m Thermal packaging tunnel shrink wrapper 9 20 1 45 1 80m S G E handle applicator for product packaging Palletizer for S G E packages on pallets 2 60 3 0x4 10m S G E 1 5 1 0x1 6m cardboard stacker Pallet wrapper S G E stretch film 2 90 2 00 2 00m Used PET Complete Bottling  ...

PET filling line - capacity: 10.000 bph – 1,5 L Year of manufacturing: 1999 – 2006 Control system: Siemens S7 Working hours: 26588 h (total on compressor) consisting of: Blowing machine Blowmax 10 year of manufacturing: 1999 incl. Chiller OHF 1250 Omega year of manufacturing: 1999 Preform dumping, feeding and orientation device year of manufacturing: 1999 High pressure compressor Ateliers Francois CE46BSG 40 year of manufacturing: 1999 Air conveying system year of manufacturing: 1999 Krones Bloc consisting of: Bottle rinser Krones Variojet 2160-054-126 with 54 rinsing stations year of manufacturing: 1999 Bottle filler Krones VP-L60-113 / SV10 / S LM wiht 60 filling valves and 10head screw capper year of manufacturing: 1999 Cap feeding system Gassner year of manufacturing: 1999 Labelling machine Krones Canmatic 600-10 RM year of m ...

Overview The CE6SG40 compressor was manufactured by the Belgian company Ateliers François S.A. in 2002. It is located at a German mineral water bottling plant and is part of a plant that has been shut down because the operator will be bottling in glass in the future and no longer in PET. The compressor is still mounted and electrically connected. Technical data Free air delivery: 1700 m³/h   Operating pressure: 40 bar Speed rpm: 410