We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 705)
used
Seidenader T&T Single Unit Track & Trace System for marking and verification of folding boxes/cartons for serialisation and aggregation (Track&Trace), the product codes and variable data (serial no., batch no., expiry date, datamatrix codes, French codes, etc.) printed on the folding cartons are verified via a camera for accuracy and quality, including Wolke m600 advanced Ink jet printer using HP ink cartridges (height of printing max. 12.7 mm), 1 (one) printing station with 2 (two) printing heads located on the back side, infeed conveyor with a length of approx. 300 mm and a width of approx. 185 mm, transfer unit with lower belt and adjustable upper belt for precise and reliable product transfer, carton length (in the direction of travel) max. 220 mm, carton width max. 200 mm, direction of travel from left to right, handheld scanner, electrics 230V + N + PE /50 Hz/1,0 kW, machine floor ...
used
• Weighing area max. 300 g • Belt speed 10-40 rpm • Axis-centre distances feeding belt/weighing belt/outfeed belt 600/200/250 mm • Belt width 100 mm • Resolution d= 0,1 g • Accuracy e= +/- 0,1 g • Temperature area 10-40°C • Weighing cell BF8 D-G-P • Belt direction left to right • Blower discharge • Interface RS 232 • Height adjustable • New belts plastic white • Connection 230V/50Hz
used
Process vessels Manufacturer: Zetterströms, Sweden Capacity 120 liters Pressure-resistant up to 8 bar Hermetically welded stainless steel insulation can be heated by means of a heating element on the underbody Agitator 2,850 rpm at 0.55 kW, Operating temperature 100 °C was used in pharmacy
used
• Weighing range max. 750 g • d=0.05 g • e=0.1 g • Load cell EC 2000 • Belt run from left to right • Belt width 145 mm • Centre distances infeed belt/weighing belt/outfeed belt 480/240/480 mm • Bad ejection by blowing nozzle • Without printer • Non calibratable • Drive 230V/50/60Hz
used
Cell Cultures Bioreactor System / Fermentation System Make Applikon Type Pilotscale PS 130 Year 2004 composed of: 1. Appliqué 130 liter bioreactor type PS 130L in stainless steel 316L electropolished Suitable for mammies - Product room 3 bar / vacuum - Double jacket 6 bar / vacuum - Magnetically coupled agitator, variable speed - Piping, heating, valves, filters, pumps, electrical cabinet, etc. - Mounted on frame and drivable - cGMP standard
used
• Weighing range max. 750 g • d=0.05 g • e=0.1 g • Load cell EC 2000 • Belt run from left to right • Belt width 190 mm • Centre distances infeed belt/weighing belt/outfeed belt 480/240/480 mm • Bad ejection by pneum. ejector • Without printer • Not calibratable • Protective cover weighing range removable • Height adjustable • Drive 115/230V/50/60Hz
used
Designation: Vacuum water degassing system Manufacturer : GEA/Füllpack Type: ONEX Capacity: 30,000 l/hour, 300 hl/hour Technical data : The system is 2 stages Residual oxygen content
used
• Weighing range max. 750 g • d=0.05 g • e=0.1 g • Load cell EC 2000 • Belt run from left to right • Belt width 190 mm • Centre distances infeed belt/weighing belt/outfeed belt 480/240/480 mm • Bad ejection by blowing nozzle • Without printer • Non calibratable • Drive 230V/50/60Hz
used
Process vessels Manufacturer: Schwarte-Milfor Capacity 750 l Cylindrical process vessel standing on feet, hermetically welded insulation, Double jacket, magnetic agitator WGR MR 125 on the bottom, agitator flange on the underbody (drive missing) Product Room: vacuum- and pressure-resistant -1/3 bar, operating temperature -10/150 °C Interior polished, double jacket: Pressure-resistant up to 3 bar, operating temperature 150 °C the measurements are: Total height approx. 2,300 cm Diameter approx. 1,050 cm cylindrical height approx. 1,300 cm Feet 300 cm high Double jacket inlet and outlet DN 25 Last Assignment Pharmacy very good condition
used
• Weighing range max. 750 g • d=0.05 g • e=0.1 g • Load cell EC 2000 • Belt run from left to right • Belt width 145 mm • Centre distances infeed belt/weighing belt/outfeed belt 480/240/480 mm • Bad ejection by blowing nozzle • Without printer • Non calibratable • Drive 230V/50/60Hz
used
Vibrating screening machine Manufacturer Vibro Separator Type VSB No. 07 327 2-deck sieve, stainless steel 3x screen frame without covering Diameter 60 cm Power 0.75 kW
used
• 11 load cells, 1 of which compensation • Weight range up to 5 g • e=d =1 mg • Output max. 50 cycles/min • Load cell MTC 10/30 • Bad ejection with single track rejection and ejection counter control • Touch panel 10,4 • IPC control • Electr. connection 380V/50Hz
used
Process plant Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only run in the laboratory Capacity usable volume 125 l, pharmaceutical version Product room vacuum- and pressure-resistant -1/+2 bar, operating temperature 133 °C Flameproof boiler room 4 bar, operating temperature 165 °C Wiper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation in French, Promas manual, various CDs Documents with FAT, IQ, OQ
used
• Weighing range max. 750 g • d=0.05 g • e=0.1 g • Load cell EC 2000 • Belt run from left to right • Belt width 145 mm • Centre distances infeed belt/weighing belt/outfeed belt 370/270/470 mm • Bad ejection through pneumatic pusher • Without printer • Non calibratable • Drive 230V/50/60Hz
used
Groninger vial line including labelling comprising ASVG 100 washing machine, container diameter from 16 up to 95 mm, container height from 33 up to 238 mm, capacity up to 3,000 vials per hour, Siemens SIMATIC S7-300, electrics 3x400V/50Hz, electrical power 3.5 kVA, vial infeed via DTE 1000 rotary infeed table (diamteter 1000 mm) under LF-unit, magazin outfeed under mobile LF-unit (The washed vials were collected in magazines and manually put into a dry heat sterilizer for sterilization. After sterilization the vials were transferred to the vial filler. The dry heat sterilizer is not part of our offer), DFVG 4001 intermittent vial filling & stoppering machine with LF-unit, container diameter from 14 up to 68 mm, container height from 30 up to 140 mm, pre & post gassing, 4 filling stations using rotary piston pumps, in-process control for checking the filling volume, Siemens SIMATIC S7-300 ...
used
Continuous checkweigher: • Specially set up for aerosol cans/bottles Ø 23 mm • Belt run from right to left • Load cell SW-D-FS with 2 tracks (2 objects are weighed simultaneously) • Passage with cycle star for object Ø 23 mm • Weighing range 0.1 - 500 g • Capacity max. 100 weighings/min • e=d 0.05 g • Paper printer • Various interfaces (Ethernet, USB, CAN, RS 232, RS 422) • HC operating terminal • Without infeed conveyor up to cycle star and outfeed conveyor between cycle star and infeed Camera box Coding station: • Receptacle for printhead Domino inkjet printer (without printhead and inkjet printer) • Camera control object bottom • bad ejection camera/weight with blowing nozzles • Connection 115/230V/50/60Hz Scale has worked together with aerosol filling/sealing unit (our item no. 13-0102).
used
Centrifugal pump Manufacturer Fristam Type FZ 17 KF Serial number 54042050 Power 3,0 kW Speed 1,430 rpm Inlet DN 50 Outlet DN 50 Explosion protection Mobile, switches and cables, bypass and hoses
used
• Weighing terminal ID7 • Weighing capacity max. 150 kg • Load cell KCC150s, max. 150 kg • Weighing surface w x d 600 x 800 mm • Printer GA46 • Mounted on stainless steel table • Last maintenance 10/2021 • Connection 100-240V/50/60Hz
used
Eddy current screening machine with belt drive Manafacture: ProcessComponents ATEX 2/3 D Year of construction: 2018
used
• Set up for bottles • Throughfeed with indexing stars for object diam. 24 and 29 mm • Without conveyor belt • Weighing range 2 - 500 g • Capacity max. 200 weighings/min • e=d 0.1 g • Passage from left to right • Paper printer • Bad ejection by pneumatic pusher • Various interfaces (Ethernet, USB, CAN, RS 232, RS 422) • HC operating terminal • Calibrated until 2014 • Height adjustable • Connection 115/230V/50Hz
used
Centrifugal pump Manufacturer Hilge Type Euro Hygia I Adapta Serial number 22/04/138796 Flow rate 6 m³ Head 39 m Power 3,0 kW Speed 2,900 rpm Inlet DN 40 Outlet DN 30 Flange connection Frequency converters Enclosure drain Pharmaceuticals, WFI Water
used
• Useful capacity 2245 l • Material 1.4404 • Operating temperature 30°C • Manhole cover top Ø 500 mm • Concave tank bottom • Drain at bottom centre NW 30 • Drain at the side NW 50 • Formerly storage tank for PW plant
used
Granulation-mixing-drying Manufacturer: GEA Type Pharma Connect TM and Air Connect TM Year of construction: 2019 GMP
used
• Useful capacity 663 l • Double jacket 48 l • Operating temperature 160°C • Operating overpressure tank -1/2 bar • Double jacket max. 6 bar • Container can be tilted for emptying • Lift lid for emptying by external lifting device (not included) • Parts in contact with product made of stainless steel 1.4435 (AISI 316 L) • Propeller agitator 2.6 kW • Anchor agitator with side scraper 2.2 kW • Temperature display • Pressure gauge • Hose connection in pressure lid with spear tap • Sight glass • Lighting • Pressure fittings • Drive 380V/50Hz
used
Process plant Manafacture: Fryma Koruma Type Delmix MZM/VK 150 Vacuum processing plant, Maximum filling volume 150 litres minimum 30 litres Tank -1 bar Double jacket 2.5 bar Mixing, emulsifying and homogenizing Agitator with scraper Homogenizer speed 2,930 rpm, power 15 kW Vacuum pump Mechanical seal
used
For blister packer Uhlmann UPS 4 1 slide-in modul with several cards 2 cable harnesses Will be sold only unchecked, as is
used
Dental colloid mill Manafacture: Gronfa Type: DC Year of manufacture: unknown Grinding gap adjustment, conical grinding set with adjustable gap size Power 2,935 rpm, 18.5 kW
used
vessel in s/s total volume vessel 1,000 ltr. working temperature max. 143°C working pressure -1/+3 bar pressure fastening screws agitato 0,75 kW inspection glass washing ball outlet in the bottom center manhole on top various outlets
used
Tube packaging machine Manufacturer: TRANSNOVA-RUF / ABB Type: Robot-Packer Year of construction: 2012 Hours 3630 Very good condition Instantaneous setting 100 tubes/min Documentation available
used
weighing range max. 300 g, resolution e= 0,1 g, accuracy from +/- 200-640 mg, speed adjustable, weighing cell BF 8, belt direction left to right, belt width 120 mm, axial distance feeding/weighing/outlet belt 420/260/420 mm, pneumatic discharge, printer, new belts, drive 230V/50Hz