fms used for sale

This FMS LINE AMADA Punching machine was manufactured in the year 2001. It is equipped with a Fanuc Series 18-P control unit.

pressure: 10 t throat: 160 mm stroke: 0 - 40 mm table:: 270 x 370 mm table:: 100 mm - Bohrung no. of strokes: 200 Hub/min bore: 25,0 mm - Werkzeug compressed air: max. 6,0 bar dayligth: 180 mm total power requirement: 0,75 kW weight: 590 kg range L-W-H: 1.168 x 1.010 x 1.670 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t throat: 200 mm stroke: 0 - 60 mm table:: 400 x 600 mm table:: 150 mm - Bohrung no. of strokes: 140 Hub/min bore: 40,0 mm - Werkzeug compressed air: max. 6,0 bar dayligth: 300 mm total power requirement: 3,0 kW weight: 1.670 kg range L-W-H: 1150 x 1350 x 2050 mm Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t throat: 200 mm stroke: 0 - 50 mm table:: 360 x 550 mm table:: 140 mm - Bohrung no. of strokes: 160 Hub/min bore: 35,0 mm - Werkzeug compressed air: max. 6,0 bar dayligth: 240 mm total power requirement: 2,2 kW weight: 1.250 kg range L-W-H: 1310 x 1250 x 1860 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X axis travel 3270 mm Y axis travel 700 mm Z axis travel 850 mm Distance between table top and spindle nose 100/850 mm Distance between spindle center and column 1050 mm Price board dimensions 3500 × 650 mm Maximum weight supported 20,000 kg Cavea number ti 6 × 18 mm Spindle rpm 4000 HSK 63 spindle connection Engine power in S3 20 kW 30-place tool magazine Random tool search Maximum tool diameter 80 126 mm Fast acceleration 0.3G Work progress 1/12000n mm/min Manual advance zero-4000mm minute Dimensions, weight and tank capacity Height 3600 mm Length 6700 mm +1000 mm conveyor outlet Width 3400 mm +1100 mm auxiliary Overall weight 24,000 kg 5 liter lubrication unit Coolant 450 litres COMPLETE WITH SCOTTI 4TH AXLE TABLE

Description: Including hydraulic steady rest, filter system, chip conveyor, documentation A standard truck is sufficient for transportation Technical specifications without guarantee. Attention: without hydraulic swivel chuck and tools turning diameter: 600 mm, serial number: 26,234, x-motion: 300 mm, z-motion: 1,500 mm, C-axis simultaneously controllable: Yes, Integrated C-axis: Yes, control: SIEMENS SINUMERIK 840 D, toolchanger positions: 8, number of places for driven tools: 1, total power requirement: 89 kW kW, weight approx.: 17,000 kg, Approx. Onsite Dimension. (l x w x h): 6,400 x 3,300 x 2,700 mm

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0 Technical data Units: vertical: 14 Rotary table:diameter: 400 mm Number of work stations max.: 15 Work-piece clamping: with device diameter: 50 mm Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.10 kW Weight of the control about: 300 kg Overall dimensions machine: Length: 800 mm Width: 700 mm Height: 2000 mm

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0 Technical data Units: horizontal: 2 Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.37 kW

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0 Technical data Units: horizontal: 2 Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.37 kW

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0 Technical data Voltage 50 Hz 3x: 380 Volt Spindle motor: 40 kW Machine´s weight about: 6200 kg Weight of the control about: 600 kg Overall dimensions machine: Length: 10606 mm Width: 4120 mm Height: 3400 mm

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0

Technical data Number of working units: 2 Voltage 50 Hz 3x: 380 Volt Various accessories: Dividing attachment

Technical data Units: horizontal: 4 Number of positions: 4 Number of work stations max.: 4 Work-piece clamping: with device Voltage 50 Hz 3x: 400 Volt Overall dimensions machine: Length: 1800 mm Width: 1400 mm Height: 2000 mm

Technical data Units: vertical: 1 Units: horizontal: 1 Way longitudinal slide: up to: 70 mm Working way: up to: 60 mm Swivelling range: 4 x 90 ° Work-piece clamping: with collet: EX 20 Working capacity: Boring diameter from: 0.15 mm up to: 8 mm Voltage 50 Hz 3x: 380 Volt Table drive: 0.4 kW Machine´s weight about: 750 kg Overall dimensions machine: Length: 1200 mm Width: 1120 mm Height: 1600 mm

Used Mazak Fh 8800 Machining Center Complete With Fms Line Composed Of 8 Pallets At 2 Levels + 2 Loading And Unloading Stations Machine In Excellent Visible Condition Government unit: FUSION 640 M X axis Strokes: 1300 Y axis Strokes: 1100 Z axis Strokes: 1000 Table Length Table: 800 Deck Width Deck: 800 Max Piece Dimensions L X W X H Table: D.1250 X H.1250 Spindle Table Surface: T-SLOTS Max Spindle Piece Weight: 2,200 Spindle Spindle: 8000 Spindle attachment: ISO 50 Torque Cont 10 Min Spindle: 1280 NM X-Axis Rapid Movement Rapid Movement: 48.000 Y-Axis Rapid Movement Rapid Movement: 48.000 Z Axis Rapid Movement Rapid Movement: 48.000 Number of Atc Warehouse Tools: 240 Atc Warehouse Max Tool Diameter: 360 Max Tool Length From Atc Warehouse Reference Line: 630 Atc Warehouse Tool Selection Method: FIXED Max Tool Weight Atc Warehouse: 30 Kg Atc Warehouse Tool Change Ti ...

According to the description below

2 PCs unused humidity probes for mixer Original spare parts for a love Mr of ZE 2000

Filling device electrically heated agitator tank approx. 90 litres capacity heated Mouvex ring piston pump, electric heating, control cabinet with Siemens PLC and FU for pump and agitator, in mobile stainless steel frame.

Shape tester Hommel Etamatik for roundness and shape measurement in very good condition.

x-travel:560 mm y-travel:560 mm z-travel:600 mm control:Professional 3 (Fanuc 16i MA) rapid travel x/y/z:84/84/94 m/min feeds x/y/z -stepless:50000 mm/min spindle drive:22 kW spindle speed::14000 1/min max. torque on the spindle:167 Nm size of pallet:400x400 mm table load:500 kg working diameter:630 mm workpiece - installed height:1000 mm distance spindle center to table:80 -640 mm :70 -670 mm tool magazin::137 ISO 40 max. tool weight:8 kg max. tool diameter:70 mm tool length - max.:70/170 mm weight of the machine ca.:14 t total power requirement:260 kVA User Macro variables:82 This flexible manufacturing system consists of two Makino A 55 connected to a 28 pallet linear pool with 3 setup stations. One machine has a defect in the b-axis. Second machine has a defect in one linear axis. Complete system must be disassembled and loaded by buyer. We can help to find company with forklift tru ...

MCM Clock 600 14 pallet 500x500 CNC FANUC 16iM 15000 RPM Jfmx Supervisor centro di lavoro multipallet FMS multipallet horizontal machining center in FMS under power in our warehouse Mimu machine tools (Italy)

FMS SYSTEM: Machining Cell consisting of: Two 5-Axis machining Centres 8-Pool Pallet System(1250 x 1250mm x 3.000kg) Pallet Storage System X= 3.000 mm, Y= 2.000H/1.720V, Z= 2.000mm; A= 175°, B=0,001°; 640 Pos. ATC ; Spindle Taper HSK-A100; Spindle n= 3.000; Motor 50kW; Feeds: X,Y= 40m/min, Z= 30m/min Siemens 840D, Chip-conveyor; Serial No. 1450-03 and 1451-3, both from 2003 FR: À VENDRE MAINTENANTFMS SYSTEME ; 8 Pos. Piscine à palettes (1250 x 1250mm x3.000kg). 2x MCM Jet Five Mirror 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS, X= 3.000, Y= 2.000H/1.720V, Z= 2.000mm ; A= 175°, B=0,001° ; 640 Pos. ATC ; Cône de broche HSK-A100 ; Broche n= 3.000 ; Moteur 50kW ; Alimentation : X,Y= 40m/min, Z= 30m/minSiemens 840D, convoyeur à copeaux ; numéros de série 1450-03 et 1451-3, à partir de 2003

FMS SYSTEM; Machining Cell consisting of: Two 5-Axis Machining Centres 12-Pool Pallet System (630 mm X 630 mm); Pallet Storage System X= 750 mm, Y= 860 mm, Z= 850mm; B= 0,001°; 334 Pos. ATC Spindle Taper HSK-A100; Spindle n= 11.000; Spindle 25 kW; Feeds 32.000mm/min; Chip-conveyor; Coolant System Serial No. 1283-01 (2001) Siemens 840D; and Coolant System Serial No. 1024-98 (1999) Siemens 840C FR: À VENDRE MAINTENANTFMS SYSTEME ; 12 Pos. Piscine à palettes (630 X 630mm) ; 2x horloge MCM 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS ; X= 750, Y= 860, Z= 850.mm ; A= .. ? ? B= 0,001° ; 334 Pos. ATC ; cône de broche HSK-A100 ; broche n= 11.000 ; broche 25 kW ; avance 32.000mm/min ; convoyeur à copeaux ; système de refroidissement n° 1283-01 (2001)Siemens 840D ; et système de refroidissement n° 1024-98 (1999)Siemens 840C

Overview This filtration unit was built in 2016 by Czech manufacturer Bílek Filtry. This machine is like new as it was barely used. Microfiltration can replace pasteurization of the product. This results in lower acquisition costs, lower operating costs and no influence on the taste of the beer due to pasteurization. Techn. Details Max. output when the end elements are fitted (depends on the filtered beer and parameters of the filling line): 18 hl/h (Prepor NG elements: - absolute capture of yeast - reduction of bacteria) 12 hl/ h (Bevpor PH elements: - absolute capture of yeast - absolute capture of beer by harmful bacteria) Number of heated containers 1 Container volume 120 l Heating power kW 12 Water filter assembly Components Micro-filter assembly Consists of two filters - the FMS pre-filter and the FMS final filter Mounted on a common frame and connected by a pipe with fittings Fil ...

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

thread dia.: 250 mm grinding length: 500 mm thread pitch: - mm tread diameter: 2 mm clamping length - spindle head right: 900 mm spindle bore: 66 mm clamping length - spindle head left: 1020 mm workpiece weight: 200 kg pitch: 0,8 - 288 mm pitch angle: +/- 40 ° workpiece turning speeds: 0,4 - 50 U/min grinding wheel width: 8/13/16/20/30 mm table feed: 1500 mm/min grinding spindle speed: 1900-2450 U/min no. of feed: 12 max. thread profile: 12,5 Modul number of starts: 1 - 8 dia. of hole: 160 mm grinding wheel diam. min/max.: 275 / 350 mm grinding motor: 16 kW electrics - voltage/frequency: 3 x 380 / 50 V/Hz total power requirement: ca. 20 / 45 kW / KVA weight of the machine ca.: 4,6 t dimensions of the machine ca.: 5,7 x 4,7 x 2,6 m profiling device CNC: CNC controlled Thread & Worm Grinding Machine equipped with: - CNC control Grossenbacher AG / Reishauer modell FMS 6 - CNC profiling de ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of machines: 2 Number of axis total: 5 Longitudinal travel (X-axis): 750 mm Transversal travel (y-axis): 860 mm Vertical travel (z axis): 850 mm Table divisions (B): 0.001 ° Pallets: number: 12 Length: 630 mm Width: 630 mm Tool changer: Tool magazine number of tools: 334 Spindle nose: HSK-A: 100 Spindle speeds: stepless up to: 11000 rpm Feeds: X axis: 32 m/min Y axis: 32 m/min Z axis: 32 m/min Spindle motor: 25 kW Various accessories: FMS system (flexible manufacturing system) Coolant system Chip conveyor

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 0 Technical data Number of axis total: 5 Longitudinal travel (X-axis): 3000 mm Transversal travel (y-axis): 2000 mm Vertical travel (z axis): 2000 mm vertical travel (Y-axis): 1720 mm Table divisions (B): 0.001 ° Swivel angle (a-axis): 175 ° Pallets: number: 8 Length: 1250 mm Width: 1250 mm Transport weight: 3000 kg Tool changer: Tool magazine number of tools: 640 Spindle nose: HSK-A: 100 Spindle speeds: stepless up to: 3000 rpm Feeds: X axis: 40 m/min Y axis: 40 m/min Z axis: 30 m/min Spindle motor: 50 kW Various accessories: FMS system (flexible manufacturing system) Coolant system Chip conveyor

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

MCM Clock 600 MP14 FMS consisting of 2 machines CNC FANUC 16i-M, 14 pallets 500mm x 500mm Spindle 15000RPM full 4th axis (360.000 pos) Tool Changer: 200 pos. X=600mm, Y=600mm, Z=700mm JFMX supervisor 2001 Under power in our warehouse in Gussago Mimu Machine Tools (Italy), X: 600, Pallets: 14, Pallet size: 500x500, Spindle: 15000 rpm

Overview The disposable PET-ACF line was manufactured by KHS in 2006. Most parts of the line are from KHS. Blow moulder is from Sidel and process department from GEA. The line is for sale, as the complete factory is closed Technical specifications: PET bottle formats 330 ml 500ml Suitable for juices and soft drinks with or without CO² Capacity Non-carbonated drinks: 30.000 bph (330ml 500ml) Carbonated drinks: 24.000 bph (500ml) Control: Siemens S7 Year of manufacture: 2006 The line in detail: Manufacturer: Sidel Machine type: Blow moulder Model: SBO 16 Year of manufacture: 2006    Manufacturer: KHS Machine type: Cap steriliser Model: SCS 8 Flatcap 28mm Year of manufacture: 2006    Manufacturer: KHS Machine type: Cap steriliser Model: SCT 4 Flat 38 mm Year of manufacture: 2006    Manufacturer: KHS Machine type: Filler Model: asmofill ACF 30-70-100-15 incl. supply units for peroxide ...

Force Roller, Tension, Force Transducer FMS Series RMGZ 100 B Type RMGZ 115 B Measuring range: 50 N used, tested ! Dimensions: 190 x 90 x 70 mm Dimensions (packaging): 150 x 120 x 90 mm

Bus Coupler, Profibus Coupler BECKHOFF BK3100 PROFIBUS-DP/FMS-Bus Coupler max. 64 Bus Terminals 12 MBaud 24 V DC for DIN rail mounting New ! Dimensions ( Bus Coupler ): 100 x 50 x 70 mm Dimensions ( packaging ): 105 x 55 x 75 mm

FinnPower SG5, turret punching machine FMS-system for punching of sheet metal blanks, with integrated power shears, loading and sorting system (by conveyer belts, no stacking possibility) Maximum sheet size: 2 500 x 1 250 [mm] Maximum punch force: 300 [kN] Tooling: Mate tool holder Number of tools: 25 tools in turret, A-D station (Mate Standard) Index tooling: Yes, for specific stations Multitool possibility: Yes Year of manufacturing: 1997

Control BECKHOFF 1x BK3150, PROFIBUS-DP/FMS Bus Coupler 2x KL1418, 8-channel digital input terminal 1x KL2408, 8-channel digital output terminal 7x KL3314, 4-channel input terminal for thermocouples 1x KL9010, bus end terminal 12 MBaud 24 V DC with DIN rail used, tested ! Dimensions: 203 x 100 x 80 mm

This MAZAK H-500 Horizontal Machining center was manufactured in the year 1990 in Japan. It is equipped with a Mazatrol M32 control unit and has 4 axis. The machine has a spindle speed of 50-7000 rpm and a FMS System.

TOP STATE - OVERHAUL IN 2016! Year of construction: 2001 2D table format: 2500 x 1250 3D Max processing size: 900 mm x 2150 mm x 300 mm Power: 2000W Control: FANUC incl. cooler incl. 2D programming software + chamfer module + tube/profile module incl. training incl. commissioning incl. quick penetration incl. ball roller table with 3D cutting head incl. CNC tube axle tube and profile up to 160 mm diameter plates, chamfering 3D molded parts, tubes and profiles FE: up to 15mm Oxide-free VA: up to 8mm designed for high pressure cutting up to 20 bar no foundation required! Optional automatic loading and unloading by Mazak FMS48 is available always regularly serviced with warranty / commissioning / training

The press has been completely renovated. Scope of work: cleaning and repainting of the body and covers, regeneration of clutch wheel disc linings, new pneumatic installation, new electrical installation, new control (Fiessler FMSC controllers, Siemens control panel, foot limit switch), installation of feet, new user manual and documented modernization history. Original documentation available. Pressure: 25 tons Max. number of strokes/min: 125 Slider stroke: 8-60mm Slider adjustment range: 55mm Weight: 1400 kg