flamco used for sale

We offer Compressed air tank Flamco STAG 3000 l 16bar 60°C from compressed air system Picture 1-3 The system is part of a compressed air system in a production hall. It is used, built in 1995/2016, and fully functional, in very good condition and is offered by our customer due to restructuring of the hall use. The display will be updated even further specifications: - Manufacturer: Flamco STAG Behälterbau Genthin - Model: 3000l - Year of construction: 1995 - No.: 59457 - TüV.: still available -Ab. Operating pressure : 16 bar -Ab. Cleaning temperature: 50°C - Type marking : CU 295/6 - Dimensions: D 1200 x H 3000 mm estimated - Weight: 704 kg The container is still in our customer's factory in Halle all. The sale is carried out ex works EXW (loading possibility available). The compressed air system also consists of: Screw compressor Kaeser CS 121 Bj.1995 ...

We offer Kaeser compressed air system consisting Schraubenkompressor.SC 1211, dryer DC 75E, compressed air tank 3000 l, piping with ultrafilter SG 0192, Sigma compressed air management system, Kaeser oil-water separation system and control cabinet The compressed air system is used to supply compressed air to a production hall. It was built or extended from 1995 - 2016 and is fully functional, in good condition and is offered for sale by our customer due to the restructuring of the hall use. The system must be serviced and inspected before it can be put back into operation. The system consists of the following components: 1. Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air intake duct from outside and inside with flap control 2, Adsorption dryer 1 Kaeser DC 75 E YOC 2016 6-16 bar 3. Compressed air tank flamco STAG 3000 l 16 bar Year 1995 704 kg 4 ...

Key data: 75 , 12 , 12

We offer Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air intake duct from outside and inside with flap control Picture 1-11 The system is part of a compressed air system in a production hall. It is used, built in 1995, and fully functional, in good condition and is offered by our customer due to the restructuring of the use of the hall. The display will be updated even further specifications: - Manufacturer: Kaeser Coburg - Model: Screw compressor Kaeser CS 121 with air intake duct from the outside and inside with flap control - LANDIS & GYR SQR 65.1 actuator for air flaps - Year of construction: verm 1995 - Machine No.: 1210382 - Operating hours: - electric 37756 / Compr. 20546 - Permissible operating pressure: 12 bar - Operating temperature: 75-85°C Engine - Nominal power: 75 kW - Engine speed: 1500 1/min - Degree of protection: IP ...

We offer Adsorption dryer 2 Kaeser DC 75 E YOC 2016 6-16 bar Bid 1-3 The system is part of a compressed air system in a production hall. It is used, built in 2016, and fully functional, in very good condition and is offered - due to restructuring of the hall use at our customer. The display will be updated even further specifications: - Manufacturer: Kaeser Coburg - Model: Adsorption dryer DC 75 with 2 desiccant tanks Year:2015 - Volume: 133 l - Filling weight: 100 kg - P0 & PS 0/16 bar - TO -10/+66 °C - TS +70°C - PT 26.1 bar - Year of construction: 2016 - Machine No.: 9,5486,20010-1038 - Operating hours: - will be added - Max operating temperature air: 0° C - Ambient temperature 2-45°C - DL Inlet temperature min/max +2 / +50 °C - Pressure dew point -40°C - Connection: 240V 1N /PE50 Hz 0.2A - TüV.: still available - Dimensions: 2000 x 1200 x 800 ...

Offer Centrifuge SZB0 1000C 960 1/min 6 loads/h for separation of Plastiso and Parex Photo 1-9 The centrifuge was part of a wallpaper production line. After cleaning the tools, it is used to separate the plastisol from the parex. Manufacturer: VEB Chemieanlagenbau Staßfurt Maschinfabrick Sangerhausen Type: SZB0 1000C Ref. 5604 Year of construction: 1986 Speed: 960 1/min Load: 145 kg Internal volume of the drum: estimated 200 liters Max clearance: 6 loads/h Power supply: 380V 3~ 50 Hz 5.5kW Weight: 1660kg Condition: used, stored, worked until siling and on 7 Paint mixing buckets Mixing tank Agitator tank Drais 300 l Photo 10-12 The paint mixing buckets were part of a wallpaper production plant in Halle and were used as accessories to the Drais paint mixing plant type RN 218 (sold). Technical data (partly estimated or from comparison plants): Manufacturer:  ...

We offer Adsorption dryer 1 Kaeser DC 75 E YOC 2016 6-16 bar Bid 1-5 The system is part of a compressed air system in a production hall. It's needed. Built in 2016, and fully functional in very good condition and is offered - due to the restructuring of the hall use at our customer. The compressed air tank is not part of the offer. However, it can also be sold individually or purchased with the system. specifications: - Manufacturer: Kaeser Coburg - Model: Adsorption dryer DC 75e with 2 desiccant tanks Year:2015 - Volume: 133 l - Filling weight: 100 kg - Adsorption Center: Activated Aluminum Oxide Al2O2 - P0 & PS 0/16 bar - TO -10/+66 °C - TS +70°C - PT 26.1 bar - Year of construction: 2016 - Machine No.: 9,5486,20010-1037 - Operating hours: - will be added - Max operating temperature air: 0° C - Ambient temperature 2 - 45°C - DL Inlet temperature min/ ...