filling machin used for sale

Auction-ID: A7-46691-26

Auction-ID: A1-46768-31

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 1100 mm table speeds: 0,02-6 m/min : 130 kg cross travel: max. 270 mm : 130 inkl. Spannung kg : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service  ...

Machine in working condition

Auction-ID: A3-43535-39292

Auction-ID: A3-43535-13902

Auction-ID: A3-43535-13901

WENZHOU HT-GF500B automatic disposable gloves making machine built in China in 2020, is intended for the production of foil gloves used for example, in grocery stores or in production. A solid machine body made of high-quality steel ensures high stability of the structure even at maximum production speed. The machine for making plastic gloves produces up to 220 pieces of disposable gloves in one minute, with a maximum length of 400 mm and a maximum width of 300 mm. The manufactured foil gloves have two layers of foil with a thickness of 0.008 mm to 0.02 mm, thanks to which they effectively protect hands against bacteria and viruses. The total weight of the machine is approximately 1600 kg. There are six such machines on sale, all built in 2020. Characteristics of the WENZHOU HT-GF500B automatic disposable gloves making machine - number of produced gloves: 180-220 pcs/min - num ...

X=3500mm Y=2000mm Z=1250mm W=800mm H=360° spindle 130 mm, ISO 50, max. 1600 rpm table 1600 x 1800 mm with a load of 12000 kg with Siemens electric and CNC Heidenhain TNC 415B Oil cooled: Schimpke. Dismantled. The machine has been used very little = in very good technical condition.

Multigraf MCM-48 creasing and perforating machine Specifications MCM-48: Manual of the material feed Minimum format, mm 80x100 Maximum format, mm 480x500 Material density, g/m2 80-500 Dimensions, mm: 1100 x 605 x 300 Power supply: 220 V

Auction-ID: A3-43535-11362

Working width 140cm. Including PTO. Auction-ID: A3-43534-1006

REP H48Y10W Horizontal Injection Moulding Machine Year of construction 2005 Machine Parameters Volume [cm3] 1000 Clamping force [kN] 1930 Injection pressure [bar] 1500 Moulds dimension [mm] 450x450 Tonnage 1.9t Platen size: 450x450 Cycles: 2,220,383 General condition: operational Dims [mm]: 4200 L x 1400 W x 2200 H Weight [kg]: 6750

This 3-axis Okuma Genos L300E-M was manufactured in 2015. It features a maximum turning diameter of approximately 300 mm and a distance between centers of 1060 mm. The machine is equipped with live tooling and C-axis capabilities, enhancing its versatility for various turning applications. If you are looking to get high-quality turning capabilities, consider the Okuma Genos L300E-M machine we have for sale. Contact us for further details.

This 4-axis HAAS Mini Mill was manufactured in 2015. It features a maximum spindle speed of 6,000 rpm and a factory-raised Z-axis providing additional clearance for 4th axis applications. The machine has an X-axis travel of 406 mm, Y-axis travel of 305 mm, and Z-axis travel of 456 mm. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill vertical machining centre we have for sale. Contact us for further details.

This 3-axis Fidia CORTINI HS 644 was manufactured in 2001. It features an X-axis travel of 600 mm, Y-axis travel of 450 mm, and Z-axis travel of 400 mm. The machine has a maximum linear axis speed of 30 m/min and a robust table size of 1000 x 500 mm with a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the Fidia CORTINI HS 644 vertical machining centre. Contact us for further details.

Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022

Fully Mainly Recycled 10,000 euros excluding VAT Warranty, samples and training included in the price. 1 year warranty

Price in euros without VAT: 5500

ORDER NO. 6623 TECHNICAL DATA - diameter range of machined pins 200mm - min length of input material 1100mm - infinitely variable feed speed + front/rear - knife head drive motor 15kW - feed motor 1,7kW Successively: - 2 toothed pulling shafts - 4-knife head - 2 smooth pulling pin shafts - electrically adjustable knife head - electrically adjustable shafts - dimensions length / width / height 3570x1300x1700mm - weight about 4000kg ADVANTAGES – German production - the possibility of turning poles into a cone – used turner, very good condition Net price: 159900 PLN Net price: 35533 EUR depending on the price 4,50 EUR (Prices may fluctuate with higher fluctuations)

-Electric control -Cooling as desired - water or air -Stainless details and stainless evaporator -Direct transmission -Easy access to components -ABS Plastic cover -Highly efficient machine without losses -Net dimensions: 920 / 594 / 867 mm. -Receiving hopper with a capacity of 55 kg. - Power supply: 230 / 50 / 1 - Power: 820 watts - Refrigerant: R452A -1 year warranty Category: Ice generators Label: Ice

This 9-axis KIRNER K360HS cylindrical grinding machine was manufactured in 2009. It features a grinding spindle maximum speed of 8,500 rpm and a workpiece holder maximum diameter of 150 mm. The integrated loading robot allows for efficient automation, handling up to 1,020 pieces. If you are looking to get high-quality grinding capabilities, consider the KIRNER K360HS machine we have for sale. Contact us for further details.

This 3-axis CMS NC PF 100 TCU was manufactured in 2013. It features a maximum tool length of 210 mm and a maximum tool diameter of 35 mm. The machine includes an automatic tool changer and a feeding conveyor with rollers, enhancing its operational efficiency. If you are looking to get high-quality CNC wood machining capabilities, consider the CMS NC PF 100 TCU machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details.

Feeder bottom suction wheel Folding configuration 2 platebuckles Details Stahl EZ32 counter, noise hoods, vacuum pump Condition after order we will install new suction wheel Available direct

CNC portal flame cutting machine Manufacturer: MGM Type: Cortina DS3100 Retrofit 2022 CNC control: MS300 Track width: 3,100 mm 1 oxy-fuel burner gas type as desired Track length: 5 or 6 m without table

Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 350-3000 CX features a clamping force of 350 t and a screw diameter of Ø 80 mm. It offers a PP injection capacity of 640 g and a maximum mould opening of 1260 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 350-3000 CX machine we have for sale. Contact us for further details.

Gluing station Prakma 105 top gluing Pressing station Prakma 105 2 roller pressing Optional can be bought "as it is" or refurbished, can be sold as stand alone units, with mounting table or with (vacuüm) belt to mount on

Width 500 mm Options for PVA glue

Semi automatic skewer machine- Miveg Wrap system 600 new machine 1 year warranty

3-spindle deep hole drill -without electrics- Year of construction 1998 / rebuilding 2014

Max sheetsize 250 x 350 mm Speed of substrates up to 4.000 cycli per hour Speed of numbering up to 15.000 cycli per hour Nr. of heads 2 numbering heads Feeder manual, by hand Delivery a table or jogger is suggested

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4300 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It has a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4300 CX machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 420-4300 CX features a clamping force of 420 t and a screw diameter of Ø 90 mm. It offers a maximum mould opening of 1400 mm and tie bar spacing of 800 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 420-4300 CX machine we have for sale. Contact us for further details regarding this machine.

Size 400 x 550 mm Height 160 mm Details Semitautomatic with timers Speed 40 cycles per minute Shrinking tunnel Beck shrinking tunnel

Completely safe in operations. Protected against penetration of water splashes. The motor can be used for a long time. It can be connected to grounded or ungrounded voltage. Protective cover made of several layers of steel and plastic. Waterproof. Dimensions: 250 x 210 x 350 mm. Motor: 0.18 Kw Weight: 10 kg.

Key data: 406 mm, 584 mm

Inv. Num. : 9153 Type: DS-30SSY Producer: HAAS Created: 2015 Parameters: Hours: 3002 h Maximum turning length: 584.2 mm Maximum turning diameter: 406.4 mm Maximum turning diameter over bed: 807.7 mm X-axis travel: 317.5 mm Y-axis travel: 50.6 mm Travel Z-axis: 584 mm Maximum main spindle power: 14 kVA Maximum spindle speed: 4800 1/min Number of all tools: 24 pieces Spindle bore: 88.9 mm Weight: 7259 kg Equipment: Chip conveyor Pick-up spindle C-axis Bar Feeder Tool Alignment System System for removing parts after cutting Driven Axial Holder ER32 (Heimatec) Driven radial bracket ER32 (Heimatec) Holders for rotary tools, other holders and jaws

Manual machine for foiling products in trays For the packaging of food products with CSF placed in plates or on a cardboard or other material, the packaging cuts and sticks when the substrate is lightly pressed on the heating plate! The machine is designed so that there is no need to adjust the temperature of the bonding heater and linear knife. Foil width from 250 – 500 mm. Technical data: Power: 100 watts, heated plate 150 watts Operating temperature: thermo knife 100°С -140 °С, heated plate 90°С -140 °С Productivity: 6 opac. / min. Dimensions: 590 x 700 x 250 mm Weight: 8.5 kg.

Auction-ID: A1-41997-100

Manual single clipper Characteristics: Model- KN-6R Number of clips for 1 move- 1 Clip type- In, VR Diameter of casings, mm- 20 – 80 Cutting knife- Immobile Overall dimensions, mm:Length Width Height - 260420920 Weight, kg- 12 Weight with packaging, kg- 18

Mobile sealing machine. Band width: 250 mm.

220627 Code Description Universal Cylindrical Grinder Make Jones - Shipman Model 1310 ( 8" x 18" ) Serial No. Year ? Grinding length, max. 450 mm Grinding diameter, max. 203 mm Center height 103 mm Weight workpiece kg Table tilting angle - 15 ° till + 15° Diam. Grinding wheel 350 mm Width Grinding wheel, max. 40 mm Motor power grindingwheel 1.5 kW Speeds Grindingwheel 1750 / 2300 rpm Speeds workpieceholder ( 6x ) 30 – 415 rpm Total power 3.5 kVA 380 Volts Machine size L x W x H 1.7 x 1.2 x 1.75 meters Weight 1800 kg Accessories internal grinding ( 10500-16500-24500 rpm ) coolant some tooling Condition Machine is in good condition

Weibert WJ-CU-32 5-fold combi With format sliding table 2,60m Saw blade 250-315mm swivel: 90°-45° Planing width of 320mm 3 knife shaft reversible knives (no more adjustment) Passage height of 4-225mm Milling machine: 90°-45° swivel backwards Milling machine rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Height stroke 160mm Engine power: 3 motors 4KW 400V WY-500200 ILLUSTRATIONS WITH SPECIAL EQUIPMENT, IF APPLICABLE

Auction-ID: A1-40113-32

With accessories Auction-ID: A1-46651-1007

Auction-ID: A1-40113-26

With accessories Auction-ID: A1-46651-1009

Weibert CU-41 Combine With format sliding table 2,60m Saw blade 250-315mm swivel: 90°-45° Planing width of 410mm 4 knife shaft reversible knives (no more adjustment) Dressing table length of 1800mm Passage height of 4-225mm Milling machine: 90°-45° swivel backwards Milling machine rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Height stroke 160mm Motor power: 3 motors 4 KW 400 V WY-500300 ILLUSTRATIONS WITH SPECIAL EQUIPMENT, IF APPLICABLE

Auction-ID: A1-40113-27